The research presented in this paper deals with the seismic protection of existing frame structures by means of passive energy dissipation. An iterative displacement-based procedure, based on capacity spectrum, to des...The research presented in this paper deals with the seismic protection of existing frame structures by means of passive energy dissipation. An iterative displacement-based procedure, based on capacity spectrum, to design dissipative bracings for seismic retrofitting of the frame structures is described, and some applications are discussed. The procedure can be used with any typology of dissipative device and for different performance targets. In this work, the procedure has been applied, with both traditional pushover （load profile proportional to first mode） and multimodal pushover, to an existing RC （reinforced concrete） frame building. In the application, the buckling restrained braces have been used in order to prevent damages to both the structure and non structural elements. The use of multimodal pushover proves to be more effective than pushover based on single mode in case of medium rise RC frame building （higher than 30 m） but, once this building is retrofitted, and therefore regularized, with a bracing system, the difference between using monomodal or multimodal pushover becomes insignificant.展开更多
Based on energy dissipation and structural control principle, a new structural configuration, called the megasub controlled structure （MSCS） with friction damped braces （FDBs）, is first presented. Meanwhile, to ca...Based on energy dissipation and structural control principle, a new structural configuration, called the megasub controlled structure （MSCS） with friction damped braces （FDBs）, is first presented. Meanwhile, to calculate the damping coefficient in the slipping state a new analytical method is proposed. The damping characteristics of one-storey friction damped braced frame （FDBF） are investigated, and the influence of the structural parameters on the energy dissipation and the practical engineering design are discussed. The nonlinear dynamic equations and the analytical model of the MSCS with FDBs are established. Three building structures with different structural configurations, which were designed with reference to the conventional mega-sub structures such as used in Tokyo City Hall, are comparatively investigated. The results illustrate that the structure presented in the paper has excellent dynamic properties and satisfactory control effectiveness.展开更多
Buckling-restrained braced frames(BRBFs) are vulnerable to relatively higher post-earthquake residual drifts under high intensity ground shakings. This is primarily due to the low axial elastic and post-elastic stiffn...Buckling-restrained braced frames(BRBFs) are vulnerable to relatively higher post-earthquake residual drifts under high intensity ground shakings. This is primarily due to the low axial elastic and post-elastic stiffness of bucklingrestrained braces(BRBs) satisfying the design force demand requirements. In the present study, a hybrid buckling restrained bracing system consisting of a short yielding core length BRB component and a conventional buckling-type brace component connected in series has been developed with an aim to increase the axial stiffness of braces. This study is focused on the experimental investigation of six hybrid bucking restrained braces(HBRBs) to investigate their overall behavior, loadresisting capacity, strength-adjustment factors and energy dissipation potential. The main parameters varied are the crosssectional area, the yielding length of core elements as well as the detailing of buckling-restraining system of short yielding core length BRBs. Test results showed that the HBRBs with yielding core length in the range of 30% of work-point to workpoint lengths withstood an axial strain of 6% without any instability and can deliver stable and balanced hysteretic response and excellent energy dissipation under reversed cyclic loading conditions.展开更多
Two single-storey single-span reinforcement concrete （RC） frame structures strengthened with Y-eccentrically brace were designed and manufactured to be 1/3 scale. The pseudo-dynamic testing method was used to study ...Two single-storey single-span reinforcement concrete （RC） frame structures strengthened with Y-eccentrically brace were designed and manufactured to be 1/3 scale. The pseudo-dynamic testing method was used to study the mechanical characteristics and the seismic performance under E1-Centro earthquake action with different peak acceleration adjusted by China＇s Code for Seismic Design of Buildings. The test results indicate that RC frame structures strengthened with Y- eccentrically steel brace present perfect seismic performance under strong earthquake action owing to the good ductility, strong bearing capability and fine energy absorbing capability provided by energy dissipation element and high lateral stiffness provided by diagonal braces. The seismic performance is also affected by the length of outsourcing steel at the joint between energy dissipation element of eccentric steel brace and RC frame beam. The joint should be considerably designed to make sure that shear failure can firstly occur in energy dissipation element.展开更多
文摘The research presented in this paper deals with the seismic protection of existing frame structures by means of passive energy dissipation. An iterative displacement-based procedure, based on capacity spectrum, to design dissipative bracings for seismic retrofitting of the frame structures is described, and some applications are discussed. The procedure can be used with any typology of dissipative device and for different performance targets. In this work, the procedure has been applied, with both traditional pushover （load profile proportional to first mode） and multimodal pushover, to an existing RC （reinforced concrete） frame building. In the application, the buckling restrained braces have been used in order to prevent damages to both the structure and non structural elements. The use of multimodal pushover proves to be more effective than pushover based on single mode in case of medium rise RC frame building （higher than 30 m） but, once this building is retrofitted, and therefore regularized, with a bracing system, the difference between using monomodal or multimodal pushover becomes insignificant.
基金Science and Technology Fund of NWPU Under Grant No. M450211 Seed Fund of NWPU Under Grant No. Z200729
文摘Based on energy dissipation and structural control principle, a new structural configuration, called the megasub controlled structure （MSCS） with friction damped braces （FDBs）, is first presented. Meanwhile, to calculate the damping coefficient in the slipping state a new analytical method is proposed. The damping characteristics of one-storey friction damped braced frame （FDBF） are investigated, and the influence of the structural parameters on the energy dissipation and the practical engineering design are discussed. The nonlinear dynamic equations and the analytical model of the MSCS with FDBs are established. Three building structures with different structural configurations, which were designed with reference to the conventional mega-sub structures such as used in Tokyo City Hall, are comparatively investigated. The results illustrate that the structure presented in the paper has excellent dynamic properties and satisfactory control effectiveness.
基金Department of Science and Technology,Govt. of India for the financial assistance to carry out this experimental work under sponsored project No. IITD/IRD/RP02619。
文摘Buckling-restrained braced frames(BRBFs) are vulnerable to relatively higher post-earthquake residual drifts under high intensity ground shakings. This is primarily due to the low axial elastic and post-elastic stiffness of bucklingrestrained braces(BRBs) satisfying the design force demand requirements. In the present study, a hybrid buckling restrained bracing system consisting of a short yielding core length BRB component and a conventional buckling-type brace component connected in series has been developed with an aim to increase the axial stiffness of braces. This study is focused on the experimental investigation of six hybrid bucking restrained braces(HBRBs) to investigate their overall behavior, loadresisting capacity, strength-adjustment factors and energy dissipation potential. The main parameters varied are the crosssectional area, the yielding length of core elements as well as the detailing of buckling-restraining system of short yielding core length BRBs. Test results showed that the HBRBs with yielding core length in the range of 30% of work-point to workpoint lengths withstood an axial strain of 6% without any instability and can deliver stable and balanced hysteretic response and excellent energy dissipation under reversed cyclic loading conditions.
基金Funded by National Natural Science Foundation of China (Grant No. 51078248)the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
文摘Two single-storey single-span reinforcement concrete （RC） frame structures strengthened with Y-eccentrically brace were designed and manufactured to be 1/3 scale. The pseudo-dynamic testing method was used to study the mechanical characteristics and the seismic performance under E1-Centro earthquake action with different peak acceleration adjusted by China＇s Code for Seismic Design of Buildings. The test results indicate that RC frame structures strengthened with Y- eccentrically steel brace present perfect seismic performance under strong earthquake action owing to the good ductility, strong bearing capability and fine energy absorbing capability provided by energy dissipation element and high lateral stiffness provided by diagonal braces. The seismic performance is also affected by the length of outsourcing steel at the joint between energy dissipation element of eccentric steel brace and RC frame beam. The joint should be considerably designed to make sure that shear failure can firstly occur in energy dissipation element.
