The Experiment of Obtaining Micron Beam in the Single-Particle Microbeam Facility of the Institute of Plasma Physics

The Experiments, methods and results of obtaining micron beam in the Microbeam Facility of the Institute of Plasma Physics were discussed in this paper. The H+2 beam was accelerated by the Van de GraafF electrostatic accelerator, and the collimator at the end of the beam line is a 60 μm thick stainless steel chip. And as a result, particle tracks on the solid track probes (CR39 film) etched in the solution of NaOH showed that the beam can go through the collimator with a small aperure (2000, 300, 55, 30, or 10 μm) and 3.5 μm thick vacuum film (Mylar). Besides the CR39 method, the beam was measured by an energy spectrum detector after the 10 μm diameter aperture and the 3.5 μm thick vacuum film too.

Elaborate calibration procedure for cell irradiation at the CAS-LIBB single-particle microbeam

Single-particle microbeam is uniquely capable of precisely delivering a preset number of charged particles to individual cells or sub-cellular targets to be determined in vitro, It is crucial to find a reference point that relates the microbeam＇s location to the microscope＇s plane, and align individual targets at this reference point for cell irradiation. To choose an appropriate reference point, an approach based on analysing the intensity distribution of fluorescence in a thin scintillator excited by traversing particles is newly developed using the CAS-LIBB single-particle microbeam, which features decisive physical signification and sufficient resolution. As its bonus, this on-line analysis provides precise and fast response to the determination of beam profile and potentially optimizes the microbeam quality by further adjusting hardware setup.

Preliminary Study of the CAS-LIBB Single-Particle Microbeam Ⅱ Endstation: Ⅰ. Proposed Multi-Dimensional Quantitative Fluorescence Microscopy

Single-particle microbeam as a powerful tool can open a research field to find answers to many enigmas in radiobiology. A single-particle microbeam facility has been constructed at the Key Laboratory of Ion Beam Bioengineering （LIBB）, Chinese Academy of Sciences （CAS）, China. However there has been less research activities in this field concerning the original process of the interaction between low-energy ions and complicated organisms. To address this challenge, an in situ multi-dimensional quantitative fluorescence microscopy system combined with the CAS-LIBB single-particle microbeam II endstation is proposed. In this article, the rationale, logistics and development of many aspects of the proposed system are discussed.

Preliminary Study of CAS-LIBB Single-Particle MicrobeamⅡEndstation:Ⅱ.Considerations for Choosing the Right CCD Camera

The proposed multi-dimensional quantitative fluorescence microscopy for the CASLIBB single-particle microbeam II endstation is a CCD-based imaging system. We systematically analyse the theoretical and the practical considerations pertinent to choosing the right CCD camera and unveiling the principles underlying multifarious parameters. Therefore, this analysis can be a valuable tool in scrutinizing each parameter and clarifying proper usage of a scientific CCD camera.

The Progress of a Microbeam Facility in the Institute of Plasma Physics

The progress of a microbeam facility in the Institute of Plasma Physics was discussed in this paper. This kind of equipment can supply single-particle beam which may be implanted into cells in micrometer-radius and measured by a new outstanding detector among global microbeam systems. Measurements by some plain targets showed that the highest current after the accelerator tube can be larger than 20 /μA, the H_2^+ current before the second bending magnet is near 0.9 /μA, the current after the second bending magnet is near 0.8 μA, and the current of the beam line (after a 2-mm diameter aperture) is near 0.25 nA which is enough for the single-particle microbeam experiment. It took scientists 3 months to do their microbeam experiment after setting up the accelerator beam line and get the microbeam from this equipment. Two pre-collimators were installed between the 2-mm diameter aperture and the collimator to survey the beam. Tracks on the CR39 film etched in the solution of NaOH showed that the beam can go through the collimator including a 10 μm diameter aperture and the 3.5 μm thick vacuum sealing film (Mylar). A new method, which is called optimization of the beam quality, was put forward in this paper, in order to get smaller diameter of beam-spot in microbeam system.

Electrochemical Analysis for Multiscale Single Entities on the Confined Interface

Single entities detection reveals heterogeneity and random processes hidden in ensemble measurements.Obtaining accurate single-entity information is challenging.The electrochemical analysis is at high spatial resolution and high temporal resolution to analyze single entities and measure the fast kinetics process.In this minireview,we will focus on the electrochemical strategies for single multiscale entities.