Model Predictive Control-Based Direct Torque Control for Matrix Converter-Fed Induction Motor with Reduced Torque Ripple

To reduce the torque ripple in motors resulting from the use of conventional direct torque control(DTC),a model predictive control(MPC)-based DTC strategy for a direct matrix converter-fed induction motor is proposed in this paper.Two new look-up tables are proposed,these are derived on the basis of the control of the electromagnetic torque and stator flux using all the feasible voltage vectors and their associated switching states.Finite control set model predictive control(FCS-MPC)has then been adopted to select the optimal switching state that minimizes the cost function related to the electromagnetic torque.Finally,the experimental results are shown to verify the reduced torque ripple performance of the proposed MPC-based DTC method.

AC/DC Matrix Converters for V2G Applications

由于当前V2G系统中普遍采用的电压型脉宽调制（pulse width modulation,PWM）整流方案中所存在的蓄电池电压匹配、功率体积比及系统效率问题,提出一种采用AC/DC矩阵变换器的解决方案。针对经典电流空间矢量调制策略中充电电流纹波较大的缺点,提出一种在全输出范围内减小充电电流纹波的分段优化调制策略,并深入对比分析这两种调制策略下充电电流纹波的大小。仿真和实验结果表明,所提分段优化调制策略的正确性和可行性。

High Performance Control of Matrix Converter Fed Induction Motor Drive System

Matrix converter fed motor drive is superior to pulse width modulation inverter drives since it not only provides bi-directional power flow,sinusoidal input/output currents,unity input power factor,but also allows a compact design due to the lack of DC-link capacitors for energy storage.In this paper,model and control of matrix converter fed induction motor drive system are analyzed.A combined control strategy is simplified and improved,which realizes space vector pulse width modulation of matrix converter and rotor flux oriented vector control technique for induction motor drive simultaneously.This control strategy combines the advantages of matrix converter with the good drive performance of vector control technique.Experimental results demonstrate the feasibility and effectiveness of the proposed control strategy.

PI and RST Control Design and Comparison for Matrix Converters Using Venturini Modulation Strategy

This paper presents a thorough design and comparative study of two popular control techniques, i.e., classical Proportional Integral (PI) and RST, for Matrix Converters (MCs) in terms of tracking the reference and robustness. The output signal of MCs is directly affected by unbalanced grid voltage. Some research works have attempted to overcome this problem with PI control. However, this technique is known to offer lower performance when it is used in complex and nonlinear systems. On the other hand, RST control offers better performance, even in case of highly nonlinear systems. Therefore, the RST can achieve better performance to overcome the limitation of PI control of nonlinear systems. In this paper, a RST control method is proposed as output current controller to improve the performance of the MC powered by unbalanced grid voltage. The overall operating principle, Venturini modulation strategy of MC, PI control and characteristics of RST are presented.

Research of matrix converter based on asymmetric regular sampling method SPWM control strategy

Based on the topological analysis of three-phase matrix AC to AC conversion circuit, an AC to AC nine-switch matrix isequivalent to rectification part and conversion part. The Matrix converter can be viewed as AC-DC-AC converter, the asymmetricregular sampling method SPWM(Sine Pulse Width Modulation) is studied and applied in the three-phase matrix AC to AC converter,Based on Matlab/simulink the simulation of the matrix converter with such strategy is carried out. Inductive load simulation is carriedout on the matrix converter prototype. The simulation results verify the workability of the asymmetric regular sampling method SPWMstrategy for matrix converter.

Control of Doubly Fed Induction Generator Supplied via Matrix Converter for Wind Energy Conversion System

The present paper deals with the modeling and control of Wind Energy Conversion System WECS based Doubly Fed Induction Generator DFIG using the slip energy recovery principle. The proposed drive system uses a Matrix Converter (MC) to transfer the slip energy of the rotor into the mains instead of using cascaded ac-dc-ac converter whilst the stator side is fixed to the grid. Operation at both sub-synchronous and super-synchronous regions is possible with the proposed drive system. The different level control strategies for maximum power point tracking and active-reactive power are discussed. Simulation results of the proposed doubly fed induction generator drive system show the good performance of the control system strategy for both transient and steadystate conditions.

Three Phase Dual Input Direct Matrix Converter for Integration of Two AC Sources from Wind Turbines

This project proposes a novel dual-input matrix converter (DIMC) which is used to integrate the output of the wind energy to a power grid. The proposed matrix converter is developed based on the traditional indirect matrix converter under reverse power flow operation mode, but with its six-switch voltage source converter replaced by a nine-switch configuration followed by the current source inverter (CSI). Matrix electric power conversion topologies and their switch functions are flexible and are used for specific applications. With the additional three switches, the proposed DIMC can provide six input terminals, which make it possible to integrate two independent AC sources from two independent wind turbines into a single grid tied power electronics interface. Commanded currents can be extracted from the two input sources to the grid. The proposed PI control and modulation schemes guaranteed sinusoidal input and output waveforms as well as reduced THD. The simulation results are provided to validate the effectiveness of the proposed control and modulation schemes for the proposed converter.

Short-circuit fault analysis and isolation strategy for matrix converters

The behavior of matrix converter(MC) drive systems under the condition of MC short-circuit faults is comprehensively investigated. Two isolation strategies using semiconductors and high speed fuses(HSFs) for MC short-circuit faults are examined and their performances are compared. The behavior of MC drive systems during the fuse action time under different operating conditions is explored. The feasibility of fault-tolerant operation during the fuse action time is also studied. The basic selection laws for the HSFs and the requirements for the passive components of the MC drive system from the point view of short-circuit faults are also discussed. Simulation results are used to demonstrate the feasibility of the proposed isolation strategies.

Hybrid Control Strategy for Matrix Converter Fed Wind Energy Conversion System

In this paper, a hybrid control strategy for a matrix converter fed wind energy conversion system is presented. Since the wind speed may vary, output parameters like power, frequency and voltage may fluctuate. Hence it is necessary to design a system that regulates output parameters, such as voltage and frequency, and thereby provides a constant voltage and frequency output from the wind energy conversion system. Matrix converter is used in the proposed solution as the main power conditioner as a more efficient alternative when compared to traditional back-back converter structure. To control the output voltage, a vector modulation based refined control structure is used. A power tracker is included to maximize the mechanical output power of the turbine. Over current protection and clamp circuit input protection have been introduced to protect the system from over current. It reduces the spikes generated at the output of the converter. The designed system is capable of supplying an output voltage of constant frequency and amplitude within the expected ranges of input during the operation. The matrix converter control using direct modulation method, modified Venturini modulation method and vector modulation method was simulated, the results were compared and it was inferred that vector modulation method was superior to the other two methods. With the proposed technique, voltage transfer ratio and harmonic profile have been improved compared to the other two modulation techniques. The behaviour of the system is corroborated by MATLAB Simulink, and hardware is realized using an FPGA controller. Experimental results are found to be matching with the simulation results.

Model Predictive Control Circuit of the Current Source Matrix Converter

In this paper, a new predictive control strategy for current source matrix converter (CSMC) is presented. Proposed predictive control strategy allows for creating output voltages with boost type voltage transfer ratio and desired frequency. The description of predictive control circuit of the CSMC is presented. Furthermore the simulation test results to confirm functionality of the proposed control strategy and converter properties under this strategy are shown.

A Novel Approach to Practical Matrix Converter Motor Drive System With Reverse Blocking IGBT (To continue)

a Pole voltage waveforms (VA20 and VA40) for modulation index 0.4 (middle trace is A-phase voltage waveform) x-axis: 1 div.=10ms, y-axis: 1 div.= 100V b Normalized harmonic spectrum for pole voltage of Fig. 9a c A-phase current and phase voltage for modulation index 0.4 (reference space vector is in inner layer)

A Novel Approach to Practical Matrix Converter Motor Drive System With Reverse Blocking IGBT

a Pole voltage waveforms (VA20 and VA40) for modulation index 0.4 (middle trace is A-phase voltage waveform) x-axis: 1 div.=10ms, y-axis: 1 div.= 100V b Normalized harmonic spectrum for pole voltage of Fig. 9a c A-phase current and phase voltage for modulation index 0.4 (reference space vector is in inner layer)

Fully Decoupled Branch Energy Balancing Control Method for Modular Multilevel Matrix Converter Based on Sequence Circulating Components

The modular multilevel matrix converter(M3C)is a potential frequency converter for low-frequency AC transmission.However,capacitor voltage control of high-voltage and largecapacity M3C is more difficult,especially for voltage balancing between branches.To solve this problem,this paper defines sequence circulating components and theoretically analyzes the influence mechanism of different sequence circulating components on branch capacitor voltage.A fully decoupled branch energy balancing control method based on four groups of sequence circulating components is proposed.This method can control capacitor voltages of nine branches in horizontal,vertical and diagonal directions.Considering influences of both circulating current and voltage,a cross decoupled control is designed to improve control precision.Simulation results are taken from a low-frequency transmission system based on PSCAD/EMTDC,and effectiveness and precision of the proposed branch energy balancing control method are verified in the case of nonuniform parameters and an unbalanced power system.

Comparison of Properties of Tumor Necrosis Factor-α Converting Enzyme (TACE) and Some Matrix Metalloproteases (MMPs) in Catalytic Domains

The crystal structural data of TACE, MMP-1, MMP-2, MMP-3 and MMP-9 were obtained from PDB database, and then their catalytic domains＇ properties including conformation, molecular surface hydrophobicity and electrostatic potential were analyzed and compared by using Insight II molecular modeling software. It was found that the conformation and molecular surface hydrophobicity of catalytic domains of TACE and MMPs were not obviously different, but the molecular surface electrostatic potential of catalytic domain of TACE＇ and MMPs had obvious differences. The findings are helpful in the Rational Drug Design of TACE selective inhibitor.

Dynamical Analysis of Nonlinear Bifurcation in Current-Controlled Boost Converter

Based on the bifurcation theory in nonlinear dynamics, this paper analyzes quantitatively period solution dynamic characteristic. In particular, the ones of period-1 and period-2 solutions are deeply studied. From locus of Jacobian matrix eigenvalue, we conclude that the bifurcations between period-1 and period-2 solutions are pitchfork bifurcations while the bifurcations between period-2 and period-3 solutions are border collision bifurcations. The double period bifurcation condition is verified from complex plane locus of eigenvalues, furthermore, the necessary condition occurred pitchfork bifurcation is obtained from the cause of border collision bifurcation.

A General Approach for Direct Conversion of Single Phase AC to AC Converter for Induction Heating System

This paper signifies the study of modeling and simulation of a single phase matrix converter for induction heating system. The working principle and the control method, using PID are revealing in detail. The performance of the system is carried out in MATLAB/Simulink environment with pulse width modulation switching strategy by varying the duty cycle. PID control is employed to obtain the better performance for a specified input supply for various output frequencies. The proposed control strategy of AC to AC converter has been discussed with a wide range of operating frequencies and results in low Total Harmonic Distortion.

基于无差拍预测算法的双向隔离型AC-DC矩阵变换器高动态电流控制策略

针对双向隔离型AC-DC矩阵变换器采用传统双闭环控制策略存在的控制参数多、整定困难等问题,提出了一种基于无差拍预测算法的高动态电流控制策略,通过引入无差拍预测算法对网侧电流进行控制,以减少控制器参数,消除数字控制时延。考虑到算法中电压电流检测量众多,故采用输入电压观测器以降低检测成本,减小采样误差的影响。变换器采用后级单重移相的调制方法来协调配合无差拍预测算法,其中参考输入电流指令与移相角为双射函数关系,简单易实现。仿真和实验结果表明:采用所提控制策略可以实现网侧电流正弦,功率因数接近于1;直流侧电压稳定,电流纹波率小于1%;直流电流在参考值突变时,跟踪快速且无超调、无振荡;同时,在变换器功率正向传输、反向传输以及正反向切换过程中,采用所提控制策略相比于传统的双闭环控制策略,电流动态调节时间分别缩短了69%、85%、67%。由此证明所提控制策略可以保证变换器良好的输入输出性能,并且相比于传统的双闭环控制策略在切换过程中动态性能得到显著提升。

远距离风电分频送出方式及大功率变频装置的研发

分频输电作为一种新型输电方式,在风电远距离送出场景下极具优势。为了给远距离风电经分频输电系统送出场景下的关键变频设备——模块化多电平矩阵式换流器(modular multilevel matrix converter,M3C)在工程上的实机研制与生产运行提供参考,首先介绍了分频输电的特性、风电经分频输电送出的系统方案与拓扑以及分频输电系统的关键变频设备。在此基础上,研制了分频输电系统中工/分频能量变换的关键设备——35 kV/3 MVA M3C变频器,并进行了性能试验。试验结果表明:分频变频器工程样机满载情况下的效率、模块电压不均衡度、电压/电流谐波畸变率、分频侧频率调节偏差以及功率阶跃响应时间等关键性能指标均符合设计要求。最后对分频输电系统的发展前景以及效益进行了分析,同时也指出了目前分频输电系统发展所面临的技术挑战。

不对称工况模块化多电平换流器稳定性分析的矩阵降维

模块化多电平换流器(MMC)在对称工况下的建模与稳定性分析已经得到了广泛关注。实际工程中的MMC会处于不对称运行工况,如桥臂电感不对称、交流侧电压不对称等,不对称工况下的导纳建模与稳定性分析需要进一步展开研究。目前,考虑系统多频耦合的导纳模型与定量的导纳降维方法是不对称工况稳定性分析的难点。因此,文中主要建立了适用于不对称工况的MMC导纳模型,并对适用于MMC不对称工况下小扰动稳定性分析的矩阵降维方法展开研究。该降维方法基于导纳矩阵的向量范数,适用于“黑箱”系统及各种不对称工况,可定量评估各阶导纳矩阵的降维误差量。以中国鲁西背靠背异步联网工程广西侧为例,通过PSCAD/EMTDC电磁暂态仿真验证了所建模型的准确性及所提降维方法在多种不对称工况下的适用性。