Model-free Speed Control of Single-phase Flux Switching Motor with an Asymmetrical Rotor

This paper proposes and implements a model-free open-loop iterative learning control(ILC)strategy to realize the speed control of the single-phase flux switching motor(FSM)with an asymmetrical rotor.Base on the proposed winding control method,the asymmetrical rotor enables the motor to generate continuous positive torque for positive rotation,and relatively small resistance torque for negative rotation.An initial iteration coefficient and variable iteration coefficient optimized scheme was proposed based on the characteristics of the hardware circuit,thereby forming the model-free strategy.A series of prototype experiments was carried out.Experimental results verify the effectiveness and practicability of the proposed ILC strategy.

From Control to Empowerment:A Paradigm Shift in the Discourse of Educational Supervision

As educational reforms intensify and societal emphasis shifts towards empowerment,the traditional discourse paradigm of management and control in educational supervision faces growing challenges.This paper explores the transformation of this discourse paradigm through the lens of empowerment,analyzing its distinct characteristics,potential pathways,and effective strategies.This paper begins by reviewing the concept of empowerment and examining the current research landscape surrounding the discourse paradigm in educational supervision.Subsequently,we conduct a comparative analysis of the“control”and“empowerment”paradigms,highlighting their essential differences.This analysis illuminates the key characteristics of an empowerment-oriented approach to educational supervision,particularly its emphasis on dialogue,collaboration,participation,and,crucially,empowerment itself.Ultimately,this research advocates for a shift in educational supervision towards an empowerment-oriented discourse system.This entails a multi-pronged approach:transforming ingrained beliefs,embracing renewed pedagogical concepts,fostering methodological innovation,and optimizing existing mechanisms and strategies within educational supervision.These changes are proposed to facilitate the more effective alignment of educational supervision with the pursuit of high-quality education.

Optimization control strategy for single-phase permanent magnet generator based on voltage ripple

A method of feedforward compensation for electromotive force(EMF) in the single-phase permanent magnet linear generation system and a research in the performance of the single-phase PMLG system are presented.A general mathematical model for the single-phase permanet magnet linear generator(PMLG) system is established and the current loop,voltage loop and the feedforward control are studied based on it for the control system.Then this paper analyses the transfer function of the power system,optimizes current loop and voltage loop parameters by engineering algorithm,and calculates the optimal control parameters.An EMF feedforward compensation method is developed to optimize the control system which improves dynamic performance of the power system but does not affect the steady-state performance.The result of this research verifies the correctness and rationality of the design for the control system.

Vector Control of the Single-Phase Inverter Based on the Extended and Virtual Circuits

A vector control based on the extended equivalent circuit and virtual circuits is proposed for the single-phase inverter.By the extended circuit,the other two phase voltages can be extended by the output voltage of the single-phase inverter so as to construct the voltage vector.The voltage outer-loop is to control the voltage vector in dq coordinate system,and the output voltage can track the target value without deviation in steady state.By designing the virtual circuit,the voltage inner-loop can achieve approximate decoupling and improve the dynamic response under the changeable load.Compared with the traditional dual closed-loop control,the proposed dual closed-loop control scheme only needs to detect and control the voltage without the current.It not only can achieve good control effect,but also reduce the complexity of the hardware.Finally,the simulation and experimental results show that the single-phase inverter has good static and dynamic characteristics regardless of stable load or changeable load.

Optimal tracking control for automatic transmission shift process

In order to improve the shift quality, a linear quadratic optimal tracking control algorithm for automatic transmission shift process is proposed. The dynamic equations of the shift process are derived using a Lagrange method. And a powertrain model is built in the Matlab/Simulink and veri- fied by the measurements. Considering the shift jerk and friction loss during the shift process, the tracking trajectories of the turbine speed and output shaft speed are defined. Furthermore, the linear quadratic optimal tracking control performance index is proposed. Based on the Pontryagin＇ s mini- mum principle, the optimal control law of the shift process is presented. Finally, the simulation study of the 1 - 2 upshift process under different load conditions is carried out with the powertrain model. The simulation results demonstrate that the shift jerk and friction loss can be significantly re- duced by applying the proposed optimal tracking control method.

Iterative Learning Control for a Class of Linear Continuous-time Switched Systems with Fixed Initial Shifts

This paper deals with the problem of iterative learning control for a class of linear continuous-time switched systems in the presence of a fixed initial shift. Here, the considered switched systems are operated during a finite time interval repetitively. According to the characteristics of the systems, a PD-type learning scheme is proposed for such switched systems with arbitrary switching rules, and the corresponding output limiting trajectories under the action of the PD-type learning scheme are given. Based on the contraction mapping method, it is shown that this scheme can guarantee the outputs of the systems converge uniformly to the output limiting trajectories of the systems over the whole time interval. Furthermore, the initial rectifying strategies are applied to the systems for eliminating the effect of the fixed initial shift. When the learning scheme is applied to the systems, the outputs of the systems can converge to the desired reference trajectories over a pre-specified interval. Finally, simulation examples illustrate the effectiveness of the proposed method.

Control of entanglement between two atoms by the Stark shift

Considering a quantum model consisting of two effective two-level atoms and a single-mode cavity, this paper investigates the entanglement dynamics between the two atoms, and studies the effect of the Stark shift on the entanglement. The results show that, on the one hand the atom-atom entanglement evolves periodically with time and the periods are affected by the Stark shift; on the other hand, the two atoms are not disentangled at any time when the Stark shift is considered, and for large values of the Stark shift parameter, the two atoms can remain in a stationary entangled state. In addition, for the initially partially entangled atomic state, the atom-atom entanglement can be greatly enhanced due to the presence of Stark shift. These properties show that the Stark shift can be used to control entanglement between two atoms.

Study on Control of Pneumatic Selecting and Shifting Actuators Using Rapid Control Prototyping

A gearbox in-the-loop control platform using dSPACE real-time system is designed for the study on the control technology of pneumatic selecting and shifting actuators based on rapid control prototyping.The operational principle of such actuators was analyzed using dSPACE hardware and software,resulting in a better knowledge of the logical relationship among solenoid valves,gear positions of cylinders and system input/output.Based on these,a control model was developed under the Matlab/Simulink environment and rapidly improved to meet requirements through experiments.Relevant tests have shown that analysis efficiency on selecting and shifting actuators could be raised and development of control strategy facilitated.

Dynamic Simulation and Valve Structure Optimization of an Electro-Hydraulic Clutch Shift Control System in an Automatic Transmission

The electro-hydraulic clutch control system controls the transferred torque of gear-shifting clutches in clutch-to-clutch transmissions. A nonlinear dynamic model of an electro-hydraulic clutch shift control system is presented. The mechanical and fluid subsystems of all valves are investigated, including their interactions. Model validation of the electro-hydraulic valve system is performed by comparing the simulated and measured pressure curves. The dynamic characteristics of the electro-hydraulic clutch shift control system with different supply pressures and different fluid temperatures are simulated and evaluated. It is found that pipes which are often ignored between the electro-hydraulic valve system and the clutch piston,have strong influence on clutch piston chamber pressures. In order to satisfy the required time and reduce the fluctuation of the clutch piston chamber pressures,the orifices' diameters and valve structure are optimized.

MPC‑Based Coordinated Control of Gear Shifting Process for a Power‑split Hybrid Electric Bus with a Clutchless AMT

Two-speed clutchless automated manual transmission(AMT)has been widely implemented in electric vehicles for its simple structure and low cost.In contrast,due to the complex response characteristics of powertrain,utilizing clutchless AMT in a hybrid power system comes with complex coordination control problems.In order to address these issues,a power-split hybrid electric bus with two-speed clutchless AMT is studied in this paper,and a coordinated control method based on model predictive control(MPC)is used in gear shifting control strategy(GSCS)to improve gear shifting quality and reduce system jerk.First,the dynamic model of power sources and other main powertrain components including a single planetary gear set and AMT are established on the basis of data-driven and mechanism modeling methods.Second,the GSCS is put forward using the segmented control idea,and the shifting process is divided into five phases,including(I)unloading of drive motor,(II)shifting to neutral gear,(III)active speed synchronization by drive motor,(IV)engaging to new gear,and(V)resuming the drive motor’s power,among which the phases I and V have evident impact on the system jerk.Then,the MPC-based control method is adopted for these phases,and the fast compensation of driving torque is realized by combining the prediction model and quadratic programming method.The simulation results show that the proposed GSCS can effectively reduce shift jerk and improve driving comfort.This research proposes a coordinated control strategy of two-speed clutchless AMT,which can effectively improve the smoothness of gear shifting and provides a reference for the application of two speed clutchless AMT in power-split hybrid powertrains.

Shifting force control of an AMT heavy-duty truck based on manual shift test

Taking a heavy-duty truck as a research platform,the changing characteristics of shifting force,shift time,and slipping work are obtained through theoretical analysis and manual shift test of a real vehicle. Based on the analysis of the test results,a gear-shifting control strategy of the hydraulic automated shift control system is designed and experimentally verified on the bench. By optimizing the control parameters of high-speed switching valves,a control strategy and parameters are obtained,which can meet the requirements of dynamic performance and reliability.

An Active Inrush Current Limiter Based on SCR Phase Shift Control for EV Charging Systems

This article gives an overview of the main passive solutions and active techniques, based on AC switches to limit inrush currents in medium power AC-DC converters （up to 3.7 kW） for electric vehicle charging systems. In particular, a strategy, based on SCR （silicon controlled rectifier） phase, shift control in a mixed rectifier bridge with diodes and thyristors, is proposed. The challenge is to help designers optimize the triggering delay of SCRs to both limit the peak value of inrush current spikes and optimize the charge duration of the DC-link capacitor. A mathematical model （Mathcad engineering tool） has been defined to point out, the interest of a variable triggering delay to control SCRs to meet the expectations described previously. Experimental measurements using an industrial evaluation board of the AC-DC converter demonstrate the robustness of the method.

Controlling the Goos-H?nchen Shift via Incoherent Pumping Field and Electron Tunneling in the Triple Coupled InGaAs/GaAs Quantum Dots

We study the controlling of the Goos-Hanchen （GH） shifts in reflected and transmitted light beams in the triple coupled InGaAs/GaAs quantum dot （QD） nanostructures with electron tunneling and incoherent pumping field. It is shown that the lateral shift can become either large negative or large positive, which can be controlled by the electron tunneling and the rate of incoherent pump field in different incident angles. It is also demonstrated that the properties of the OH shifts are strongly dependent on the probe absorption beam of the intracavity medium due to the switching from superluminal light propagation to subluminal behavior or vice versa. Our suggested system can be considered as a new theoretical method for developing a new nano-optoelectronic sensor.

One step to generate quantum controlled phase-shift gate using a trapped ion

This paper presents a very simple scheme for generating quantum controlled phase-shift gate with only one step by using the two vibrational modes of a trapped ion as the two qubits. The scheme couples two vibration degrees of freedom coupled with a suitable chosen laser excitation via the ionic states.

Study of the EAST Fast Control Power Supply Based on Carrier Phase-Shift PWM

EAST （experimental advanced superconducting tokamak） fast control power supply is a high-capacity single-phase AC/DC/AC inverter power supply, which traces the displacement signal of plasma, and excites coils in a vacuum vessel to produce a magnetic field that realizes plasma stabilization. To meet the requirements of a large current and fast response, the multi- ple structure of the carrier phase-shift three-level inverter is presented, which realizes parallelled multi-inverters, raises the equivalent switching frequency of the inverters and improves the per- formance of output waves. In this work the design scheme is analyzed, and the output harmonic characteristic of parallel inverters is studied. The simulation and experimental results confirm that the scheme and control strategy is valid. The power supply system can supply a large current, and has a perfect performance on harmonic features as well as the ability of a fast response.

基于动力性模糊控制拖拉机遥控换挡设计研究

为实现拖拉机遥控换挡,基于动力性模糊控制换挡设计了电控液压换挡系统,并在AMEsim中搭建仿真模型。根据发动机的调速特性,以油门开度、当前的车速和挡位为输入参数建立动力性换挡模型,并根据驾驶员意图和拖拉机状态建立二级模糊控制器对动力性换挡策略进行修正。同时,设置工况,在MatLab/Simulink中建立拖拉机传动系统模型,利用AMEsim-Simulink进行联合仿真,得到液压缸活塞杆位移曲线,对可行性进行了验证。对比传统换挡与动力性模糊控制换挡,以离合器冲击度、滑摩功等为控制目标进行仿真分析。结果表明:与传统换挡系统相比所设计的系统控制效果较优,满足拖拉机动力性适应性要求。

基于半桥三电平LLC谐振变换器的混合控制策略研究

半桥三电平LLC谐振变换器具有体积小、开关器件少、开关器件耐压高等优势,已逐渐应用于直流充电模块后级为动力电池充电。针对传统变频调制(PFM)策略与移相调制(PSM)策略无法实现宽输出电压范围的问题进行分析,提出一种宽增益范围的移相-变频(PSM-PFM)混合控制策略。通过搭建一台功率为600 W、输出电压为20~60 V的实验样机进行验证。实验结果表明,所提控制策略相比单一调制策略具有更宽的增益,进而可实现宽输出电压范围,能够为动力电池提供稳定、宽范围且可调的充电电压,并实现开关管零电压开通。

Influence of Buffering Pressure Characteristics on Shift Clutch Engagement Process

The dynamic math model of shift clutch in engagement process was determined on the basis of hydraulic buffering valve and shift clutch of a power shift steering transmission. The influence of buffering pressure characteristic on shift clutch engagement process was analyzed. The study results could be used to the characteristics match of the shift clutch with the hydraulic system of the high speed tracked vehicle power shift steering transmission and the performance prediction.

高速电磁阀相移PWM电压驱动策略

高速电磁阀作为数字流量技术的核心控制元件,其动态响应及有效可控占空比区间严重影响系统流量控制精度。为进一步扩展有效可控占空比区间,提出一种包含基准脉冲宽度调制(PWM)、预激励PWM、激励PWM、高频PWM、预卸荷PWM、卸荷PWM在内的相移PWM电压驱动策略,给出相移PWM电压驱动策略的工作原理,并建立高速电磁阀动态特性理论模型,开展预激励PWM、预卸荷PWM可控占空比仿真分析与实验验证研究。结果表明:所提策略与复合PWM电压驱动策略相比,阀芯开启、关闭压力响应时间分别缩小了87%、37.9%,工作频率为100 Hz,阀芯正常启闭可控占空比为0.285~0.77,自扩展至0.085~0.81。

Reference-input-based Imaginary Axis Current Estimation Method for DQ Control Strategy in Single-phase PWM Converters

For dq control strategies in single-phase pulse width modulation(PWM)converters,the-axis current must be created by imaginary axis current estimation(IACE)methods.The estimated error of the-axis current during the transient process causes d-q axis current loops to be incompletely decoupled,thereby affecting the dynamic performance of the current loop.The second-order generalized integrator(SOGI)method suffers from slow dynamic response.The fictive-axis emulation(FAE)method provides fast dynamic response but it is sensitive to circuit parameters.A reference-input(RI)-based IACE method is proposed to overcome the above shortcomings.According to the characteristic that the-axis current loop has no transient process,the-axis current is estimated by the d-q axis reference inputs.This is equivalent to introducing the-axis reference input as a feedforward term into the d-q axis current loop,so the parameter sensitivity problem is solved,and the parameter tuning is not needed.The proposed method can maintain good steadystate performance and significantly improve the dynamic performance of the current loop.Furthermore,it is straightforward and can be easily implemented in digital controllers.Comprehensive hardware-in-the-loop(HIL)experimental comparisons with the SOGI and FAE methods have been conducted to verify the correctness and effectiveness of the proposed RI-based IACE method.