Design and analysis of a novel single-mode single-polarization photonic crystal fibre based on polarization-dependent coupling and absorption effect

A novel single-mode single-polarization （SMSP） photonic crystal fibre has been proposed and analysed based on the polarization-dependent coupling and absorption effect via a full-vector finite element method with perfectly matched layers. The numerical results predict that very efficient SMSP operation can be achieved with both high bandwidth and high extinction ratio at low loss penalty. Effects of the fibre structural parameters on the SMSP bandwidth and extinction ratio have been explored, which will provide useful guide for the design and fabrication of the fibre. The results obtained will be instructive for the realization of new SMSP fibres with high performance.

Significant wave height estimation using azimuth cutoff of C-band RADARSAT-2 single-polarization SAR images

This paper proposes two simple models, look-up table（LUT） model and empirical model, to directly retrieve significant wave height（Hs） using synthetic aperture radar（SAR） azimuth cutoff（λc）. Both models aim at C-band VV, HH, VH, and HV single-polarization SAR images. The LUT model relates Hs to λc, while the empirical model relates Hs to both λc and SAR range-to-velocity（β）. The LUT model coefficients are derived by simulation under different sea states and observation conditions, which depend on incidence angle（θ）, wave direction（dw）, and βbut are independent of polarization. The empirical model coefficients are obtained by fitting the collocated data,which only depend on polarization. To fit empirical model coefficients and validate the two models, C-band RADARSAT-2 fine quad-polarization（VV＋HH＋VH＋HV） single-look complex（SLC） SAR images and collocated buoy data are collected. Retrieved Hs, using Yang model and the two models proposed in this paper from four kinds of polarization SAR data, are compared with buoy Hs. Results show that both LUT and empirical models have the capacity of retrieving Hs from C-band RADARSAT-2 co-polarization SAR data, while Yang model is not suitable for these kinds of SAR data. Moreover, the empirical model is also valid for cross-polarization SAR data showing clear ocean wave stripes.

Single-polarization single-mode hollow-core negative curvature fiber with nested U-type cladding elements

Hollow-core negative curvature fibers(HC-NCFs)have become one of the research hotspots in the field of optical fiber because of their potential applications in the data and energy transmissions.In this work,a new kind of single-polarization single-mode HC-NCF with nested U-type cladding elements is proposed.To achieve the single-polarization single-mode transmission,we use two different silica tubes in thickness,which satisfy the resonance and anti-resonance conditions on the U-type cladding elements and the cladding tubes,respectively.Besides,the elliptical elements are introduced to achieve good single-mode performance.By studying the influences of the structure parameters on the propagation characteristics,the optimized structure parameters are obtained.The simulation results show that when the wavelength is fixed at 1550 nm,the single-polarization single-mode transmission is achieved,with the polarization extinction ratio of 25749 and minimum high-order mode extinction ratio of 174.Furthermore,the confinement loss is only 0.0015 dB/m.

Observation of wavelength-switchable solitons in an all-polarization-maintaining erbium-doped fiber cavity based on graphene saturable absorber reflector

We present the generation of wavelength-switchable single-polarization solitons in an all-polarization-maintaining erbium-doped fiber laser mode-locked by a graphene saturable absorber. Ultrashort pulses centered at the wavelength of 1531.6 nm with the duration of 816 fs and centered at the wavelength of 1557.8 nm with the duration of 402 fs are separately obtained from the same fiber laser cavity. The cavity loss adjusted by the gold reflector plays a crucial role in wavelength switching.

A novel polarization converter based on the band-stop frequency selective surface

A dual-passband single-polarized converter based on the band-stop frequency selective surface(FSS)with a low radar cross-section(RCS)is designed in this article.The unit cell of the proposed converter is formed by a polarization layer attached to the band-stop frequency selective surface.The simulation results reveal that the co-polarization reflection coefficients below-10 d B are achieved in 3.82–13.64 GHz with a 112.4%fractional bandwidth(the ratio of the signal bandwidth to the central frequency).Meanwhile,a polarization conversion band is realized from 8.14 GHz to 9.27 GHz with a polarization conversion ratio which is over 80%.Moreover,the 1 d B transmission window is obtained in two nonadjacent bands of 3.42–7.02 GHz and 10.04–13.91 GHz corresponding to the relative bandwidths of 68.9%and 32.3%,respectively.Furthermore,the radar cross-section of the designed structure can be reduced in the wideband from 2.28 GHz to 14 GHz,and the 10 d B RCS reduction in the range of 4.10–13.35 GHz is achieved.In addition,the equivalent circuit model of this converter is established,and the simulation results of the Advanced Design System(ADS)match well with those of CST Microwave Studio(CST).The archetype of the designed converter is manufactured and measured.The experiment results match the simulation results well,which proves the reliability of the simulation results.

Cross-Polarized GPR Imaging of Fracture Flow Channeling

Ground penetrating radar（GPR） can be used to image fractures and monitor fluid flow in the subsurface. Conventional GPR imaging uses single-polarization, co-polarized acquisition. We examine the use of cross-polarized GPR signals for imaging flow channeling in a discrete horizontal fracture. Numerical modeling（FDTD） demonstrates that when the fracture channel is oriented at an oblique angle to the survey line, depolarization of the GPR signal results in scattered energy along the cross-polarized components. When the channel is oriented parallel or orthogonal to the survey line, all scattered energy is captured by the co-polarized components and no signal is present in the cross-polarized orientation. Multipolarization, time-lapse 3D GPR field data were acquired at the Altona Flat Rock test site in New York State. The GPR surveys were conducted during background fresh fracture water conditions and during a natural gradient saline tracer test which was used to highlight flow channels along a sub-horizontal fracture. Amplitude analysis of the cross-polarized data reveals flow channeling that is in agreement with the co-polarized GPR images and with independent hydraulic tests. This investigation demonstrates that cross-polarized components of GPR signals can be used to enhance imaging of flow channels in fractured media.