A poly vinyl alcohol（PVA） scaffold with aligned porous is strengthened by in-situ combining with TiO2. The increased freezing rate can be used to further increase the strength of aligned porous materials. The streng...A poly vinyl alcohol（PVA） scaffold with aligned porous is strengthened by in-situ combining with TiO2. The increased freezing rate can be used to further increase the strength of aligned porous materials. The strengthened porous PVA exhibits aligned interconnected porous structures and shows a significant enhancement in tensile testing and compression strength testing.展开更多
Tungsten nanoparticle-strengthened Cu composites were prepared from nanopowder synthesized by a sol–gel method and in-situ hydrogen reduction.The tungsten particles in the Cu matrix were well-dispersed with an averag...Tungsten nanoparticle-strengthened Cu composites were prepared from nanopowder synthesized by a sol–gel method and in-situ hydrogen reduction.The tungsten particles in the Cu matrix were well-dispersed with an average size of approximately 100–200 nm.The addition of nanosized W particles remarkably improves the mechanical properties,while the electrical conductivity did not substantially decrease.The Cu–W composite with 6 wt%W has the most comprehensive properties with an ultimate strength of 310 MPa,yield strength of 238 MPa,hardness of HV 108 and electrical conductivity of 90%IACS.The enhanced mechanical property and only a small loss of electrical conductivity demonstrate the potential of this new strategy to prepare W nanoparticle-strengthened Cu composites.展开更多
In order to improve the seismic performance of Chinese traditional stele relics, a suitable aseismic strengthening method of Chinese traditional stele relics is proposed. Taking the typical stele relic in Xi＇an Beili...In order to improve the seismic performance of Chinese traditional stele relics, a suitable aseismic strengthening method of Chinese traditional stele relics is proposed. Taking the typical stele relic in Xi＇an Beilin as an example, the on-site investigations were carried out to obtain the actual geometric size and damage state of the stele relic. Then, the structural performance of the stele relic was analyzed by the finite element software ANSYS. Finally, the two different aseismic strengthening methods of the traditional stele relic are proposed and comparatively analyzed. The results show that in addition to the common problems, such as weathering, and cracks, etc, earthquakes seriously threaten the structural safety of stele relics. Under the rarely-occurring earthquake of eight degree, the unstrengthened stele relic will be overturned, and many cracks will occur at the connection area of stele body and stele pedestal. When the stele relic is strengthened by the stainless angle steel strengthening method, the stele relic will not be overturned, but some cracks will occur at the connection area of stele body and stele pedestal. When the stele relic is strengthened by the base isolation strengthening method, the stele relic will not be overturned, and no cracks will occur at the connection area of stele body and stele pedestal. Therefore, the aseismic strengthening effect of the base isolation strengthening method is obviously better than that of the stainless angle steel strengthening method, and this method is a suitable aseismic strengthening method of Chinese traditional stele relics.展开更多
Al2O3 dispersion copper alloy powder was prepared by intemal oxidation, and three consolidation methods--high-velocity compaction （HVC）, hot pressing （HP）, and hot extrusion （HE）--were used to prepare Al2O3 disp...Al2O3 dispersion copper alloy powder was prepared by intemal oxidation, and three consolidation methods--high-velocity compaction （HVC）, hot pressing （HP）, and hot extrusion （HE）--were used to prepare Al2O3 dispersion-strengthened copper （Cu-Al2O3） alloys. The microstructures and properties of these alloys were investigated and compared. The results show that the alloys prepared by the HP and HE methods exhibited the coarsest and finest grain sizes, respectively. The alloy prepared by the HVC method exhibited the lowest relative density （98.3% vs. 99.5% for HP and 100% for HE）, which resulted in the lowest electrical conductivity （81% IACS vs. 86% IACS for HP and 87% IACS for HE）. However, this alloy also exhibited the highest hardness （77 HRB vs. 69 HRB for HP and 70 HRB for HE）, the highest compressive strength （443 MPa vs. 386 MPa for I/P and 378 MPa for HE）, and the best hardness retention among the investigated alloys. The results illustrate that the alloy prepared by the HVC method exhibits high softening temperature and good mechanical properties at high temperatures, which imply long service life when used as spot-welding electrodes.展开更多
With deepening of domestic market opening up to the outside world and fast developing of domestic economy, many old bridges, especially the highway bridges constructed during 1960~1970, bear the heavy traffic loads, w...With deepening of domestic market opening up to the outside world and fast developing of domestic economy, many old bridges, especially the highway bridges constructed during 1960~1970, bear the heavy traffic loads, which made old highway strengthening project the very pressing task. In this paper, the reason why old bridge is damaged, the requirements for strengthening technology and construction plan for bridge strengthening are analyzed in detail, hopefully, there are some useful proposals provided for old bridge transforming.展开更多
The method of warming the kidney and strengthening the spleen is widely used in the treatment of ulcerative colitis (UC) with significant curative effect.This paper reviews the relevant literature in recent years.
基金Supported by the Northwestern Polytechnical University under Grant No 158-QP-2016the Natural Science Basic Research Plan of Shaanxi Province under Grant No 2017JM5112
文摘A poly vinyl alcohol（PVA） scaffold with aligned porous is strengthened by in-situ combining with TiO2. The increased freezing rate can be used to further increase the strength of aligned porous materials. The strengthened porous PVA exhibits aligned interconnected porous structures and shows a significant enhancement in tensile testing and compression strength testing.
基金supported by the Fundamental Research Funds for the Central Universities (No. FRF-TP-18-029A2)State Key Lab of Advanced Metals and Materials of China (No. 2019-Z10)
文摘Tungsten nanoparticle-strengthened Cu composites were prepared from nanopowder synthesized by a sol–gel method and in-situ hydrogen reduction.The tungsten particles in the Cu matrix were well-dispersed with an average size of approximately 100–200 nm.The addition of nanosized W particles remarkably improves the mechanical properties,while the electrical conductivity did not substantially decrease.The Cu–W composite with 6 wt%W has the most comprehensive properties with an ultimate strength of 310 MPa,yield strength of 238 MPa,hardness of HV 108 and electrical conductivity of 90%IACS.The enhanced mechanical property and only a small loss of electrical conductivity demonstrate the potential of this new strategy to prepare W nanoparticle-strengthened Cu composites.
基金The National Natural Science Foundation of China(No.51578127,51778122)the Foundation for the Author of National Excellent Doctoral Dissertation of China(No.201452)the Fundamental Research Funds for the Central Universities(No.2242016K41065)
文摘In order to improve the seismic performance of Chinese traditional stele relics, a suitable aseismic strengthening method of Chinese traditional stele relics is proposed. Taking the typical stele relic in Xi＇an Beilin as an example, the on-site investigations were carried out to obtain the actual geometric size and damage state of the stele relic. Then, the structural performance of the stele relic was analyzed by the finite element software ANSYS. Finally, the two different aseismic strengthening methods of the traditional stele relic are proposed and comparatively analyzed. The results show that in addition to the common problems, such as weathering, and cracks, etc, earthquakes seriously threaten the structural safety of stele relics. Under the rarely-occurring earthquake of eight degree, the unstrengthened stele relic will be overturned, and many cracks will occur at the connection area of stele body and stele pedestal. When the stele relic is strengthened by the stainless angle steel strengthening method, the stele relic will not be overturned, but some cracks will occur at the connection area of stele body and stele pedestal. When the stele relic is strengthened by the base isolation strengthening method, the stele relic will not be overturned, and no cracks will occur at the connection area of stele body and stele pedestal. Therefore, the aseismic strengthening effect of the base isolation strengthening method is obviously better than that of the stainless angle steel strengthening method, and this method is a suitable aseismic strengthening method of Chinese traditional stele relics.
基金financially supported by Guangdong Provincial Industrial High-tech Project (No. 2015A010105020)Guangzhou Science & Technology New Star of Pearl River Project (No. 2012J2200096)+3 种基金the Open Research Fund of State Key Laboratory of Powder Metallurgy of Central South UniversityGuangdong Provincial Innovation Ability Construction Project (No. 2016B070701024)Guangzhou Innovation Platform Construction and Sharing Project (No. 201509010003)Guangdong Provincial Science & Technology Basic Condition Construction Field Project (No. 2014B030301012)
文摘Al2O3 dispersion copper alloy powder was prepared by intemal oxidation, and three consolidation methods--high-velocity compaction （HVC）, hot pressing （HP）, and hot extrusion （HE）--were used to prepare Al2O3 dispersion-strengthened copper （Cu-Al2O3） alloys. The microstructures and properties of these alloys were investigated and compared. The results show that the alloys prepared by the HP and HE methods exhibited the coarsest and finest grain sizes, respectively. The alloy prepared by the HVC method exhibited the lowest relative density （98.3% vs. 99.5% for HP and 100% for HE）, which resulted in the lowest electrical conductivity （81% IACS vs. 86% IACS for HP and 87% IACS for HE）. However, this alloy also exhibited the highest hardness （77 HRB vs. 69 HRB for HP and 70 HRB for HE）, the highest compressive strength （443 MPa vs. 386 MPa for I/P and 378 MPa for HE）, and the best hardness retention among the investigated alloys. The results illustrate that the alloy prepared by the HVC method exhibits high softening temperature and good mechanical properties at high temperatures, which imply long service life when used as spot-welding electrodes.
文摘With deepening of domestic market opening up to the outside world and fast developing of domestic economy, many old bridges, especially the highway bridges constructed during 1960~1970, bear the heavy traffic loads, which made old highway strengthening project the very pressing task. In this paper, the reason why old bridge is damaged, the requirements for strengthening technology and construction plan for bridge strengthening are analyzed in detail, hopefully, there are some useful proposals provided for old bridge transforming.
文摘The method of warming the kidney and strengthening the spleen is widely used in the treatment of ulcerative colitis (UC) with significant curative effect.This paper reviews the relevant literature in recent years.
