Preparation,Characterization,and Catalytical Application of MgCoAl-Hydrotalcite-Like Compounds

MgCoAl-hydrotalcite-like compounds （MgCoAI-HTLcs） were synthesized using the coprecipitation method of variable pH values. The effect of each factor on the preparation of HTLcs was discussed systematically, which included pH values, mole ratios of Mg2＋ to Co2＋, the concentrations of the solution, and the temperature and time of the hydrothermal treatment. Besides, the thermal decomposition of MgCoAI-HTLcs was discussed. X-ray diffraction, thermogravimetric analysis, and FT-IR spectroscopy were performed to characterize the MgCoAI-HTLcs samples. The results showed that when the pH = 7.6-8.5 or 5.5-6.2, atomic ratios of （Mg^2＋＋Co2＋）/Al^3＋ 2 and Mg^2＋/Co^2＋ ranging from 1.00 to 2.00, temperature and time of hydrothermal treatment being 110℃ and 6 h, unique MgCoAI-HTLcs with high crystallinity could be obtained. When the calcination temperature was up to 250℃, the MgO phase was detected coexisting with Al2O3 and MgAl2O4 was highly spreaded on the derived mixed oxides. The synthesis reaction of benzoin methyl ether with methanol and benzaldehyde was chosen to study the catalytic activity of MgCoAI-HTLcs. The catalyst showed high activity and high stability in the synthesis of benzoin methyl ether in the feasible condition.

Preparation,Characterization and Application of ZnAlLa-Hydrotalcite-Like Compounds

The preparation of ZnAlLa-hydrotalcite-like compounds [ZnAlLa-HTLcs] wasstudied. ZnAlLa-HTLcs were synthesized by a method of variable pH with the raw materials ofZn(NO_3)_2, Al(NO_3)_3, La(NO_3)_3, and NaOH. The eS'ccts of some factors (i.e. pH values, the moleratio of Al^(3+) to La^(3+), temperature and the period of hydrothermal treatment) on thepreparation of HTLcs were discussed systematically. XRD, TG-DTA, FT-IR spectroscopy, and ICP wereperformed to characterize ZnAlLa-HTLcs samples, and the thermal stability of HTLcs was alsodiscussed. It was shown that unique ZnAlLa-HTLcs with high crystallinity can be prepared, under theconditions of pH = 5.5-6.5, n(Zn^(2+))/n(Al^(3+) + La^(3+))=2 and the atomic ratio of La^(3+) toAl^(3+) ranging from 0.07 to 2, hydrothermal treatment at 120 ℃ for 5 h. When the calcination ofthe HTLcs is performed at temperatures above 200 ℃, ZnO phase is detected with Al_2O_3 and La_2O_3spreading on its top. The complex metal oxides derived from ZnAlLa-HTLcs at 500 ℃ have highercatalytic activity and selectivity than those from ZnAl-HTLcs for the esterification of acetic acidwith n-butanol under the same reaction conditions.

Pharmacokinetics and bioequivalence of ranitidine and bismuth derived from two compound preparations

AIM： To evaluate the bioequivalence of ranitidine and bismuth derived from two compound preparations. METHODS： The bioavailability was measured in 20 healthy male Chinese volunteers following a single oral dose （equivalent to 200 mg of ranitidine and 220 mg of bismuth） of the test or reference products in the fasting state. Then blood samples were collected for 24 h. Plasma concentrations of ranitidine and bismuth were analyzed by high-performance liquid chromatography and inductively coupled plasma-mass spectrometry （ICPMS）, respectively. The non-compartmental method was used for pharmacokinetic analysis. Log-transformed Cmax, AUC（0-t） and AUC（0-∞） were tested for bioequivalence using ANOVA and Schuirmann two-one sided t-test. Tmax was analyzed by Wilcoxon＇s test. RESULTS： Various pharmacokinetic parameters of ranitidine derived from the two compound preparations, including Cmax, AUC（0-t）, AUC（0-∞）, Tmax and T1/2, were nearly consistent with previous observations. These parameters derived from test and reference drug were as follows： Cmax（0.67 ± 0.21 vs 0.68 ± 0.22 mg/L）, AUC（0-t）（3.1 ± 0.6 vs 3.0 ± 0.7 mg/L per hour）, AUC（0-∞）（3.3 ± 0.6 vs 3.2 ± 0.8 mg/L per hour）, Tmax （2.3 ± 0.9 VS 2.1 ± 0.9 h） and T1/2 （2.8 ± 0.3 vs 3.1 ± 0.4 h）. In addition, double-peak absorption profiles of ranitidine were found in some Chinese volunteers. For bismuth, those parameters derived from test and reference drug were as follows： Cmax （11.80 ± 7.36 vs 11.40 ± 6.55 μg/L）, AUC（0-t） （46.65 ± 16.97 vs 47.03 ± 21.49 μg/L per hour）, Tmax （0.50 ± 0.20 vs 0.50 ± 0.20 h） and T1/2 （10.2 ± 2.3 vs 13.0 ± 6.9 h）. Ninety percent of confidence intervals for the test/reference ratio of Cmax, AUC（0-t） and AUC（0-∞） derived from both ranitidine and bismuth were found within the bioequivalence acceptable range of 80%-125%. No significant difference was found in Tmax derived from both ranitidine and bismuth. CONCLUSION： The two compound preparations are bioequivalent and may be prescribed interchangeably.

Preparation, interfacial regulation and strengthening of Mg/Al bimetal fabricated by compound casting: A review

Mg/Al bimetal combines the advantages of both aluminum and magnesium and has broad application prospects in automotive, aerospace,weapons, digital products and so on. The compound casting has the characteristics of low cost, easy to achieve metallurgical combination and suitable for the preparation of complex bimetallic parts. However, bimetallic joint strength is low due to differences of physical properties between Al and Mg, oxide film on metallic surface and interfacial Al-Mg IMCs, which is closely related to the interfacial microstructure and properties. Therefore, how to control the interface of the bimetal to achieve performance enhancement is the focus and difficulty in this field. At present, there are mainly the following strengthening methods. First, the “zincate galvanizing” and “electrolytic polishing+anodic oxidation” technology were exert on the surface of Al alloy to remove and break the oxide film, which improved the wettability between Al and Mg. Second, the undesirable Al-Mg IMCs were reduce or elimination by adding the interlayers(Zn, Ni and Ni-Cu). Thirdly, the evolution process of interfacial microstructure was changed and fine strengthening phases were formed by adding Si element to Al alloy or rare earth element to Mg alloy. Fourthly, mechanical vibration and ultrasonic vibration were applied in the process of the filling and solidification to refine and homogenize the interfacial structure. Finally, some other methods, including secondary rolling, thermal modification, heat treatment and constructing exterior 3D morphology, also can be used to regulate the interfacial microstructure and compositions. The above strengthening methods can be used alone or in combination to achieve bimetallic strengthening. Finally, the future development direction of the Mg/Al bimetal is prospected, which provides some new ideas for the development and application of the Mg/Al bimetal.

Preparation of Compound Ultrafine CeO2 by Wet-Solid-Phase Mechanochemical Modification

To satisfy practical requirements from industrial applications, an alternate route for synthesis compound ultrafine CeO2 powders by wet-solid-phase mechanochemical modification using industrial grade hydrated cerium carbonate as raw material was proposed.The effect of modifier reaction percentage, reaction time, calcining temperature and modifier amount on particle size, density, suspensibility, and hardness of compound CeO2 powder was investigated.The phase evolutions of preparation process were characterized by XRD.SEM micrograph of the final product shows that compound CeO2 powders obtained are well-dispersed, spherically-shaped, uniformly-sized and submicron-sized particles.The method is readily available in raw material, low in cost, simple in process, and has great potential for industrialization.The compound CeO2 powders of different physical properties can be synthesized by controlling the above-mentioned influence factors in preparation process.

Therapeutic Efficacy of Chinese Herbal Compound Preparation on Viral Diseases in Poultry

[Objective] To develop a new antiviral agent with high and long efficacy, wide spectrum, low toxicity and low cost from traditional Chinese herbal medicine and their compound. [ Method] The ＂Quxie＂ （ i. e. eliminating pathogenic factors） drugs including Hedyotis diffusa and Loni- cera japonica and ＂Fuzheng＂ （ i. e. strengthening body resistance） drugs including Radix astragali and Glycyrrhiza uralensis were taken to form an antiviral herbal compound preparation. Taking the astragalus polysaccharide monomer as control, the experiment was constructed by using the agent to treat some naturally occurring viral diseases, including Newcastle disease （ND）, infectious bursal disease （IBD）, duck viral hepatitis （DVH）, avian influenza （Al） H9 subtype and avian swollen head syndrome. [Ressult] The effective rates of the agent for treatment of the above- mentioned diseases were 87%, 87%, 69%, 100% and 100%, respectively, which were higher than that of astragalus polysaccharide monomer. The cure rates for these diseases were 33%, 37%, 13%, 69% and 75%, respectively, which were significantly higher than that of astragalus polysacchadde monomer （ P 〈 0.01 ）. The rates of poor therapeutic efficacy were 15%, 21%, 24%, 6% and 7%, respectively, which were significantly lower than that of astragalus polysaccharide monomer （P 〈 0.01 ）. [ Condusion] The Chinese herbal compound preparation shows good therapeutic effects on some avian viral diseases, which can decrease mortality rate and improve production performance of poultry more greatly than astragalus polysaccharide monomer.

Preparation for Supramolecular Complexes of Chiral Diols BDPDD, DMBDPD and BINOL with Some Prochiral Compounds

Interaction between chiral diols BDPDD, DMBDPD and BINOL with prochiral compounds was examined and some new supramolecular complexes were prepared. It was found that these chiral hosts could include prochiral guests, a, b-unsaturated compounds or piper- azinedione derivatives to give inclusion crystals in different molar ratio. Formations of these supramolecular complexes were characterized by the data of IR and 1H NMR spectra.

Preparation of Compound Ban Huang Oral Liquid

[Objectives] To determine the optimal preparation process of compound Ban Huang oral liquid. [Methods] Orthogonal test and other methods were used to optimize the preparation conditions of compound Ban Huang oral liquid. [Results] The optimal conditions determined were as follows: soaking for 12 h,decocting twice with 2 h per time,concentrating filtrate to 1. 18-1. 25 g/m L at 80 ℃,ethanol precipitating twice with ethanol contents of 600 and 750 ml/L,standing for 24 h. [Conclusions] The optimized preparation process is simple,feasible and stable,and can be used for preparing compound Ban Huang oral liquid.

Discussion on the Quality Evaluation Method of Traditional Chinese Medicine Compound Preparations

As an important representative of the modernization of the Chinese medicine industry,traditional Chinese medicine(TCM)compound preparations are an indispensable part of the development of TCM.The complex ingredients and unclear action mechanism of TCM compound preparations restrict the development of TCM.In line with this problem,the modern TCM research has made extensive remarkable achievements.From the single indicator in the past to multiple indicator,the research on the combination of TCM fingerprints and pharmacodynamics also has made great progress.The introduction of quality evaluation methods such as the"quantitative analysis of multi-components by a single marker","dose-effect"indicator,"Bioactive Equivalent Combinatorial Components"(BECCs)and TCM quality markers have brought new ideas for quality control of TCM compound preparations.

Anti-tumor mechanism of Angelica and its compound preparations

Angelica is a holy medicine for gynecology, clinically used for blood deficiency and chlorosis, dizziness and palpitation, irregular menstruation, dysmenorrhea, abdominal pain, rheumatism, hemorrhoids, constipation. In recent years, with the discovery of polysaccharides enhancing the immune function and anti-tumor effects of the body, Angelica has attracted more and more attention from researchers at home and abroad.

The Preparation and Application of Chitosan Compound Flocculant

[Objective]The research aimed to study preparation and application of the environment-friendly compound flocculant.[Method]Chitosan（natural biological product,CTS）,ferric sulfate[Fe2（SO4） 3]and polymeric aluminum chloride（PAC） as the main raw materials,four kinds of environment-friendly flocculants were made to conduct flocculation treatment on the domestic wastewater of Wuhan Bioengineering Institute.COD and turbidity of the wastewater as the main indicators,influences of the compound flocculant formulation,flocculant dosage and pH on flocculation effect were studied.[Result]CTS/PAC and CTS/Fe2（SO4） 3 compound flocculants had better removal rates for COD and turbidity when compared with single inorganic flocculant.The best volume ratio of CTS/PAC was 1.0：5.0.The smallest dosage of CTS/PAC in each 500 ml of water sample was 4.0 ml.When pH was 7.2,removal rates of the COD and turbidity were respectively 78.5% and 98.4%,which rose by 36.5% and 21.5% respectively than that singly using PAC.[Conclusion]CTS/PAC was a kind of ideal compound flocculant and had better application prospect.

Simple Preparation of the Photocatalyst of Sn^(2+)-doped Titania

Preparation method of photocatalyst, using TiCl4 and SnCl2 as raw material and photocatalytic activity of nano-scaled core-shell Sn^2＋ -doped titania photocatalyst was studied in this paper. The as-prepared samples were studied by UV-Vis, XRD, XPS, TEM. The particles of Sn^2＋-doped TiO2 photocatalyst, calcined from 150 to 600 ℃ for 5 h, possesses narrow particle size distribution and the sample was composed of anatase phase. Its photocatalytic efficiency was investigated by UV irradiation.

Preparation and characterization of wood/montmorillonite nanocomposites

With montmorillonite （MMT） organically modified as organophilic MMT （OMMT） and water-soluble phenol formaldehyde resin （PF） as intermediate, Chinese fir （Cunningharnia lanceolata） wood/MMT nanocomposites （WMNC） were prepared via nano intercalation compounding and characterized by XRD, SEM and FTIR. Results show that： 1） the preparation of OMMT is very successful; 2） the self-made PF can effectively intercalate into MMT to increase markably its gallery distance and even exfoliate its nano silicate laminae; 3） the XRD analysis indicates that some exfoliated MMT enters the non-crystallized region of microfibrils in wood cell walls and the crystallinity degree of wood in WMNC decreases; 4） the SEM graphs show that multiform MMT exists in WMNC. Some grains block in wood cell lumen, some layers adhere to the wood surface of the inner cell wall and some exfoliated nanolaminae even insert into wood cell walls; and 5） the FTIR analysis suggests that MMT and wood in WMNC perhaps interact via certain chemical bonding.

PREPARATION OF A SINGLE PHASE R_(3)(Fe,Mo)_(29)(R=Ce,Nd,Sm,Gd,Tb,Dy AND Y)

１ＩＮＴＲＯＤＵＣＴＩＯＮＩｎｒｅｃｅｎｔｙｅａｒｓ，ｒｅｓｅａｒｃｈｅｒｓｉｎｔｈｅｆｉｅｌｄｏｆｐｅｒｍａｎｅｎｔｍａｇｎｅｔｉｃｍａｔｅｒｉａｌｓｈａｖｅｐａｉｄｍｏｒｅａｔｔｅｎｔｉｏｎｔｏｔｈｅｎｅｗｔｙｐｅｏｆｒａｒｅｅａｒｔｈｉｒｏｎ...

Compound Danshen Yeast 1.0

Background:Heterologous synthesis presents a promising new approach for accessing the active ingredients of traditional Chinese medicine(TCM),contributing to the conservation of natural medicinal resources.Compound Danshen preparation,a widely used TCM formulation,is designed to treat coronary heart disease and angina pectoris.It is primarily composed of Salviae Miltiorrhizae Radix et Rhizoma(Danshen),Notoginseng Radix et Rhizoma(Sanqi),and borneol(Bingpian).Danshen primarily yields tanshinones and phenolic acids,while Sanqi produces notoginsenosides.Borneol serves as an auxiliary agent to promote mental clarity,dissipate heat,and relieve pain.Objectives:The objective is to employ heterologous synthesis in a single yeast strain to produce the active ingredients of Compound Danshen preparation,and these include notoginsenosides,tanshinones,and borneol.Methods:Firstly,the“plug-and-play”terpene synthase screening framework in Saccharomyces cerevisiae was used for the identification of a novel,highly efficient bornyl diphosphate synthase.Furthermore,by leveraging the Compound Danshen preparation as a basis to concurrently reconstruct the biosynthetic pathways for the notoginsenoside precursor protopanaxadiol(a triterpene),the tanshinone precursor miltiradiene(a diterpene),and borneol(a monoterpene)within a single yeast strain.Results:This engineered strain,termed Compound Danshen Yeast 1.0,successfully produced protopanaxadiol at 62.34 mg/L,miltiradiene at 15.38 mg/L,and borneol at 2.54 mg/L in shake-flask fermentation.Conclusions:This research signifies the inaugural cross-species andmulticomponent synthetic biology endeavor that enables the synthesis of active ingredients in engineered cells,setting the stage for the industrial manufacture of TCM compounds.

兽用抗菌复方制剂研究进展

随着动物感染性疾病的复杂化和细菌耐药性的发展,兽医临床急需对混合感染和耐药菌有效的新型抗菌药物,但新药开发难度大、费用高、周期长。抗菌药联合使用既可以增加抗菌谱,又可以防止耐药性出现,在疾病治疗中起着重要的作用。复方制剂是抗菌药联合使用的简易形式,因此兽用复方制剂研制具有广阔发展空间。本文总结了兽用抗菌复方制剂研发、批准和使用情况的研究进展,提出了兽用抗菌复方制剂研发中存在的主要问题,为今后相关的科学研究和产品研发提供了一定的参考。

解冻方式对新疆干辣椒炒牛肉预制菜品质的影响

为探究解冻方式对新疆干辣椒炒牛肉预制菜品质的影响,本研究选取自然解冻、流水解冻、超声波解冻、微波解冻和低温解冻作为解冻方式,分析5种解冻方式对新疆干辣椒炒牛肉预制菜pH值、色泽、质构特性、挥发性盐基氮(TVB-N值)、硫代巴比妥酸值(TBARS值)和挥发性风味物质品质指标的影响。结果表明,与空白对照组相比,低温解冻在维持新疆干辣椒炒牛肉预制菜pH值(5.19)和色泽方面表现最佳,超声波解冻的质构特性最好且TVB-N值最低(7.35 mg·100 g^(-1)),微波解冻的TBARS值最低(0.36 mg·kg^(-1)),微波解冻和低温解冻后新疆干辣椒炒牛肉预制菜的感官评分较好,流水解冻各项指标处于中间位置。D-柠檬烯、苯甲醛、苯乙醛、壬醛、芳樟醇、苯乙醇、α-松油醇、3-甲基-苯酚、萘、茴香脑、草蒿脑等挥发性风味物质对新疆干辣椒炒牛肉预制菜总体风味的形成有重要贡献,低温解冻后的挥发性风味物质最接近空白对照组。本研究可为新疆干辣椒炒牛肉预制菜的解冻工艺提供支撑。

发酵鲜人参中人参皂苷compound K的分离制备

目的发酵鲜人参中人参皂苷compound K的分离制备。方法利用硅胶柱层析,对发酵鲜人参中人参皂苷compound K进行分离纯化,并通过液相质谱联用仪及核磁共振法对其结构进行鉴定。结果分离得到人参皂苷compound K的纯度为95%以上,纯品得率为0.6%,理论得率为80%以上。结论该方法简单易行,成本较低,适合大规模工业生产和药理活性试验研究。

复合酶制剂与单一酶制剂对洗涤效果的应用研究

随着全球洗涤剂市场向液体化趋势发展,酶制剂作为洗涤剂配方中一种高效、温和的助剂,在提升洗涤效果方面发挥着重要作用。通过对比单一酶制剂与复合酶制剂的去污效果和对织物蓬松度提升方面的性能,筛选最佳酶制剂。此外,酶制剂的稳定性也是影响洗涤效果的关键因素之一,通过加速试验(37℃放置2个月)研究了酶制剂在洗涤产品中对实际洗涤性能的影响。