By employing sintering additives of Li2CO3 and Y2O3,porous Si3N4 ceramics are prepared after experiencing the processes of sintering and post-vacuum heat treatment at 1680 and 1550°C,respectively.The experimental...By employing sintering additives of Li2CO3 and Y2O3,porous Si3N4 ceramics are prepared after experiencing the processes of sintering and post-vacuum heat treatment at 1680 and 1550°C,respectively.The experimental results demonstrate the completed phase transformation fromαtoβ-Si3N4 in Si3N4 ceramic samples with a amount of 1.60 wt%Li2CO3(0.65 wt%Li2O)and 0.33 wt%Y2O3 additives.The as-synthesized porous Si3N4 ceramics exhibit high flexural strength((126.7±2.7)MPa)and high open porosity of 50.4%at elevated temperature(1200°C).These results are attributed to the significant role of added Li2CO3 as sintering additive,where the volatilization of intergranular glassy phase occurs during sintering process.Therefore,porous Si3N4 ceramics with desired mechanical property prepared by altering the addition of sintering additives demonstrate their great potential as a promising candidate for high temperature applications.展开更多
Alow-cost porous ceramic support was prepared from low-grade palygorskite clay(LPGS) and silicon carbide(SiC)with vanadium pentoxide(V_(2) O_(5)) additives by a dry-press forming method and sintering.The effects of Si...Alow-cost porous ceramic support was prepared from low-grade palygorskite clay(LPGS) and silicon carbide(SiC)with vanadium pentoxide(V_(2) O_(5)) additives by a dry-press forming method and sintering.The effects of SiC-LPGS ratio,pressing pressure,carbon powder pore-forming agent and V_(2) O_(5) sintering additives on the microstructure and performance of the supports were investigated.The addition of an appropriate amount of SiC to the LPGS can prevent excessive shrinkage of the support during sintering,and increase the mechanical strength and open porosity of the supports.The presence of SiC(34.4%) led to increases in the open porosity and mechanical strength of 40.43% ± 0.21% and(17.76 ± 0.51) MPa,respectively,after sintering at 700℃ for 3 h.Because of its low melting point,V_(2) O_(5) can melt to liquid during sintering,which increases the mechanical strength of the supports and retains the porosity.Certainly,this can also encourage efficient use of the LPGS and avoid wasting resources.展开更多
基金Project(202045007)supported by the Start-up Funds for Outstanding Talents in Central South University,China。
文摘By employing sintering additives of Li2CO3 and Y2O3,porous Si3N4 ceramics are prepared after experiencing the processes of sintering and post-vacuum heat treatment at 1680 and 1550°C,respectively.The experimental results demonstrate the completed phase transformation fromαtoβ-Si3N4 in Si3N4 ceramic samples with a amount of 1.60 wt%Li2CO3(0.65 wt%Li2O)and 0.33 wt%Y2O3 additives.The as-synthesized porous Si3N4 ceramics exhibit high flexural strength((126.7±2.7)MPa)and high open porosity of 50.4%at elevated temperature(1200°C).These results are attributed to the significant role of added Li2CO3 as sintering additive,where the volatilization of intergranular glassy phase occurs during sintering process.Therefore,porous Si3N4 ceramics with desired mechanical property prepared by altering the addition of sintering additives demonstrate their great potential as a promising candidate for high temperature applications.
基金the financial support of the National Natural Science Foundation of China (No. 21978109, 21878118)Natural Science Foundation of the Jiangsu Higher Education Institutions of China (19KJA430011)+2 种基金Natural Science Foundation of Jiangsu Province (BK20171268)Jiangsu Province industry-university-research cooperation project (BY2019179)Jiangsu Qing Lan Project。
文摘Alow-cost porous ceramic support was prepared from low-grade palygorskite clay(LPGS) and silicon carbide(SiC)with vanadium pentoxide(V_(2) O_(5)) additives by a dry-press forming method and sintering.The effects of SiC-LPGS ratio,pressing pressure,carbon powder pore-forming agent and V_(2) O_(5) sintering additives on the microstructure and performance of the supports were investigated.The addition of an appropriate amount of SiC to the LPGS can prevent excessive shrinkage of the support during sintering,and increase the mechanical strength and open porosity of the supports.The presence of SiC(34.4%) led to increases in the open porosity and mechanical strength of 40.43% ± 0.21% and(17.76 ± 0.51) MPa,respectively,after sintering at 700℃ for 3 h.Because of its low melting point,V_(2) O_(5) can melt to liquid during sintering,which increases the mechanical strength of the supports and retains the porosity.Certainly,this can also encourage efficient use of the LPGS and avoid wasting resources.
