Facing constraints imposed by storage and bandwidth limitations,the vast volume of phasor meas-urement unit(PMU)data collected by the wide-area measurement system(WAMS)for power systems cannot be fully utilized.This l...Facing constraints imposed by storage and bandwidth limitations,the vast volume of phasor meas-urement unit(PMU)data collected by the wide-area measurement system(WAMS)for power systems cannot be fully utilized.This limitation significantly hinders the effective deployment of situational awareness technologies for systematic applications.In this work,an effective curvature quantified Douglas-Peucker(CQDP)-based PMU data compression method is proposed for situational awareness of power systems.First,a curvature integrated distance(CID)for measuring the local flection and fluc-tuation of PMU signals is developed.The Doug-las-Peucker(DP)algorithm integrated with a quan-tile-based parameter adaptation scheme is then proposed to extract feature points for profiling the trends within the PMU signals.This allows adaptive adjustment of the al-gorithm parameters,so as to maintain the desired com-pression ratio and reconstruction accuracy as much as possible,irrespective of the power system dynamics.Fi-nally,case studies on the Western Electricity Coordinat-ing Council(WECC)179-bus system and the actual Guangdong power system are performed to verify the effectiveness of the proposed method.The simulation results show that the proposed method achieves stably higher compression ratio and reconstruction accuracy in both steady state and in transients of the power system,and alleviates the compression performance degradation problem faced by existing compression methods.Index Terms—Curvature quantified Douglas-Peucker,data compression,phasor measurement unit,power sys-tem situational awareness.展开更多
China’s wind power has gone through an exploring course of 20 years. At present, it is on the fast track under the support of the state’s preferential policies concerned. The various wind power development areas in ...China’s wind power has gone through an exploring course of 20 years. At present, it is on the fast track under the support of the state’s preferential policies concerned. The various wind power development areas in China have made rapid progress and put forward their own thinking of developing wind energy.展开更多
In the first half of 2007, the power industry in Shandongprovince continued to maintain a rapid growth momentum.The gross electricity consumption amounted to 121.25 TWh,14.4% higher over that in the same period of las...In the first half of 2007, the power industry in Shandongprovince continued to maintain a rapid growth momentum.The gross electricity consumption amounted to 121.25 TWh,14.4% higher over that in the same period of last year. The totalinstalled capacity reached 53.29 GW. It was expected that bythe end of 2007, the gross electricity consumption in Shan-dong would reach 260 TWh, increasing by 14.4% on ayear-on-year basis; the maximum load would reach 40.展开更多
1. The present manufacturing situation of China’s thermal power generation equipment By the year 1995. development of China’s electric power industry has experienced a course of a hundred years. Over a period of the...1. The present manufacturing situation of China’s thermal power generation equipment By the year 1995. development of China’s electric power industry has experienced a course of a hundred years. Over a period of the initial 50 years. China’s development of electric power was slow. At the time of 1949, the total installed capacity in China was 1,850 MW and the electricity generated was only 4.3 billion kWh. During the past 46 years after 1949, her展开更多
基金supported by the National Natural Sci-ence Foundation of China(No.52077195).
文摘Facing constraints imposed by storage and bandwidth limitations,the vast volume of phasor meas-urement unit(PMU)data collected by the wide-area measurement system(WAMS)for power systems cannot be fully utilized.This limitation significantly hinders the effective deployment of situational awareness technologies for systematic applications.In this work,an effective curvature quantified Douglas-Peucker(CQDP)-based PMU data compression method is proposed for situational awareness of power systems.First,a curvature integrated distance(CID)for measuring the local flection and fluc-tuation of PMU signals is developed.The Doug-las-Peucker(DP)algorithm integrated with a quan-tile-based parameter adaptation scheme is then proposed to extract feature points for profiling the trends within the PMU signals.This allows adaptive adjustment of the al-gorithm parameters,so as to maintain the desired com-pression ratio and reconstruction accuracy as much as possible,irrespective of the power system dynamics.Fi-nally,case studies on the Western Electricity Coordinat-ing Council(WECC)179-bus system and the actual Guangdong power system are performed to verify the effectiveness of the proposed method.The simulation results show that the proposed method achieves stably higher compression ratio and reconstruction accuracy in both steady state and in transients of the power system,and alleviates the compression performance degradation problem faced by existing compression methods.Index Terms—Curvature quantified Douglas-Peucker,data compression,phasor measurement unit,power sys-tem situational awareness.
文摘China’s wind power has gone through an exploring course of 20 years. At present, it is on the fast track under the support of the state’s preferential policies concerned. The various wind power development areas in China have made rapid progress and put forward their own thinking of developing wind energy.
文摘In the first half of 2007, the power industry in Shandongprovince continued to maintain a rapid growth momentum.The gross electricity consumption amounted to 121.25 TWh,14.4% higher over that in the same period of last year. The totalinstalled capacity reached 53.29 GW. It was expected that bythe end of 2007, the gross electricity consumption in Shan-dong would reach 260 TWh, increasing by 14.4% on ayear-on-year basis; the maximum load would reach 40.
文摘1. The present manufacturing situation of China’s thermal power generation equipment By the year 1995. development of China’s electric power industry has experienced a course of a hundred years. Over a period of the initial 50 years. China’s development of electric power was slow. At the time of 1949, the total installed capacity in China was 1,850 MW and the electricity generated was only 4.3 billion kWh. During the past 46 years after 1949, her
