Performance analysis of 20 Pole 1.5 KW Three Phase Permanent Magnet Synchronous Generator for low Speed Vertical Axis Wind Turbine

This paper gives performance analysis of a three phase Permanent Magnet Synchronous Generator (PMSG) connected to a Vertical Axis Wind Turbine (VAWT). Low speed wind condition (less than 5 m/s) is taken in consideration and the entire simulation is carried in Matlab/Simulink environment. The rated power for the generator is fixed at 1.5 KW and number of pole at 20. It is observed under low wind speed of6 m/s, a turbine having approximately1 mof radius and2.6 mof height develops 150 Nm mechanical torque that can generate power up to 1.5 KW. The generator is designed using modeling tool and is fabricated. The fabricated generator is tested in the laboratory with the simulation result for the error analysis. The range of error is about 5%-27% for the same output power value. The limitations and possible causes for error are presented and discussed.

Maximum Power Point Tracking in Variable Speed Wind Turbine Based on Permanent Magnet Synchronous Generator Using Maximum Torque Sliding Mode Control Strategy

The present study was carried out in order to track the maximum power point in a variable speed turbine by minimizing electromechanical torque changes using a sliding mode control strategy. In this strategy, first, the rotor speed is set at an optimal point for different wind speeds. As a result of which, the tip speed ratio reaches an optimal point, mechanical power coefficient is maximized, and wind turbine produces its maximum power and mechanical torque. Then, the maximum mechanical torque is tracked using electromechanical torque. In this technique, tracking error integral of maximum mechanical torque, the error, and the derivative of error are used as state variables. During changes in wind speed, sliding mode control is designed to absorb the maximum energy from the wind and minimize the response time of maximum power point tracking(MPPT). In this method, the actual control input signal is formed from a second order integral operation of the original sliding mode control input signal. The result of the second order integral in this model includes control signal integrity, full chattering attenuation, and prevention from large fluctuations in the power generator output. The simulation results, calculated by using MATLAB/m-file software, have shown the effectiveness of the proposed control strategy for wind energy systems based on the permanent magnet synchronous generator(PMSG).

Study of Steady-state Performances for a Novel Line-start Single-phase Permanent Magnet Synchronous Motor With Three Parallel-connected Windings

对于三相感应电动机的单相运行,学者们已经提出了多种实用的接线方式,比如Smith接法、SEMIHEX接法。然而,对于三相异步起动永磁同步电动机的单相运行,很少有合适的接法提出。将并联式接法应用于三相异步起动永磁同步电动机的单相运行,提出了一种新型三绕组并联式异步起动单相永磁同步电动机。分析了三相异步起动永磁同步电动机同步运行时以及起动瞬间的正序、负序阻抗,基于对称分量法,对该接法电机的对称运行条件进行分析,得出了电容的确定方法,并利用遗传算法对电容值进行优化。提出了该新型电机稳态性能的计算方法;设计了一台高功率因数和一台低功率因数三相异步起动永磁同步电动机作为样机,并分别将其改接为三绕组高效单相永磁同步电动机,进行实验研究。实验结果表明,低功率因数的异步起动永磁同步电动机更适合改接成新型三绕组并联式单相永磁同步电动机。由低功率因数三相永磁同步电动机改接成的单相异步起动永磁同步电动机在额定负载下运行时,具有与同容量三相永磁同步电动机相近的效率和更高的功率因数。

Comparative Performance of Fixed-Speed and Variable-Speed Wind Turbine Generator Systems

In the early development of the wind energy, the majority of the wind turbines have been operated at constant speed. Subsequently, the number of variable-speed wind turbines installed in wind farms has increased. In this paper, a comparative performance of fixed and variable speed wind generators with Pitch angle control has been presented. The first is based on a squirrel cage Induction Generator （IG） of 315 kW rated power, connected directly to the grid. The second incorporated a Permanent Magnet Synchronous Generator （PMSG） of 750 kW rated power. The performances of each studied wind generator are evaluated by simulation works and variable speed operation is highlighted as preferred mode of operation.

Robust nonlinear control via feedback linearization and Lyapunov theory for permanent magnet synchronous generator-based wind energy conversion system

In this paper,the method for the nonlinear control design of a permanent magnet synchronous generator based-wind energy conversion system(WECS)is proposed in order to obtain robustness against disturbances and harvest a maximum power from a typical stochastic wind environment.The technique overcomes both the problem of nonlinearity and the uncertainty of the parameter compared to such classical control designs based on traditional control techniques.The method is based on the differential geometric feedback linearization technique(DGT)and the Lyapunov theory.The results obtained show the effectiveness and performance of the proposed approach.

Integrated Equivalent Model of Permanent Magnet Synchronous Generator Based Wind Turbine for Large-scale Offshore Wind Farm Simulation

The high-speed simulation of large-scale offshore wind farms(OWFs) preserving the internal machine information has become a huge challenge due to the large wind turbine(WT) count and microsecond-range time step. Hence, it is undoable to investigate the internal node information of the OWF in the electro-magnetic transient(EMT) programs. To fill this gap,this paper presents an equivalent modeling method for largescale OWF, whose accuracy and efficiency are guaranteed by integrating the individual devices of permanent magnet synchronous generator(PMSG) based WT. The node-elimination algorithm is used while the internal machine information is recursively updated. Unlike the existing aggregation methods, the developed EMT model can reflect the characteristics of each WT under different wind speeds and WT parameters without modifying the codes. The access to each WT controller is preserved so that the time-varying dynamics of all the WTs could be simulated. Comparisons of the proposed model with the detailed model in PSCAD/EMTDC have shown very high precision and high efficiency. The proposed modeling procedures can be used as reference for other types of WTs once the structures and parameters are given.

Control Strategy of Wind Turbine Based on Permanent Magnet Synchronous Generator and Energy Storage for Stand-Alone Systems

This paper investigates a variable speed wind turbine based on permanent magnet synchronous generator and a full-scale power converter in a stand-alone system.An energy storage system(ESS)including battery and fuel cell-electrolyzer combination is connected to the DC link of the full-scale power converter through the power electronics interface.Wind is the primary power source of the system,the battery and FC-electrolyzer combination is used as a backup and a long-term storage system to provide or absorb power in the stand-alone system,respectively.In this paper,a control strategy is proposed for the operation of this variable speed wind turbine in a stand-alone system,where the generator-side converter and the ESS operate together to meet the demand of the loads.This control strategy is competent for supporting the variation of the loads or wind speed and limiting the DC-link voltage of the full-scale power converter in a small range.A simulation model of a variable speed wind turbine in a stand-alone system is developed using the simulation tool of PSCAD/EMTDC.The dynamic performance of the stand-alone wind turbine system and the proposed control strategy is assessed and emphasized with the simulation results.

PMSG Wind Energy Conversion System: Modeling and Control

In this paper, a model of a variable speed wind turbine using a permanent magnet synchronous generator (PMSG) is presented and the control schemes are proposed. The model presents the aerodynamic part of the wind turbine, the mechanic and the electric parts. Simulations have been conducted with Matlab/Simulink to validate the model and the proposed control schemes.

Performance of a Wind-Diesel Hybrid Power System with STATCOM as a Reactive Power Compensator

The paper deals with automatic reactive power control of an isolated wind-diesel hybrid power system. The power is generated by diesel engine and wind turbine as prime movers with electrical power conversion by permanent-magnet synchronous generator (PMSG) and permanent-magnet induction generator (PMIG) respectively. The mathematical model of the system developed is based on reactive power flow equations. The paper investigates the dynamic performance of the hybrid system for 1% step increase in reactive power load with 1% step increase in input wind power.

A Review of Direct Driven PMSG for Wind Energy Systems

This paper presents a comprehensive overview study of the DDPMSG （direct driven permanent magnet synchronous generator） for wind energy generation system. Wind turbine controls are provided. The PMSG （permanent magnet synchronous generator） is introduced as construction and model. Configurations of different power converters are presented for use with DDPMSG in wind systems at variable speed operation and maximum power capture. Control techniques for the system are discussed for both machine-side and grid-side in details. Grid integration is provided with focus on how to insure power quality of the system and the performance at disturbances.

A Fuzzy Logical MPPT Control Strategy for PMSG Wind Generation Systems

Making full use of wind power is one of the main purposes of the wind turbine generator control. Conventional hill climbing search （HCS） method can realize the maximum power point tracking （MPPT）. However, the step size of HCS method is constant so that it cannot consider both steady-state response and dynamic response. A fuzzy logical control （FLC） algorithm is proposed to solve this problem in this paper, which can track the maximum power point （MPP） quickly and smoothly. To evaluate MPPT algorithms, four performance indices are also proposed in this paper. They are the energy captured by wind turbine, the maximum power-point tracking time when wind speed changes slowly, the fluctuation magnitude of real power during steady state, and the energy captured by wind turbine when wind speed changes fast. Three cases are designed and simulated in MATLAB/Simulink respectively. The comparison of the three MPPT strategies concludes that the proposed fuzzy logical control algorithm is more superior to the conventional HCS algorithms.

PID-Type Fuzzy Controller for Grid-Supporting Inverter of Battery in Embedded Small Variable Speed Wind Turbine

Frequency and voltage of embedded variable speed wind turbine (VSWT) driving a permanent magnet synchronous generator (PMSG) is strongly affected by wind speed fluctuations. In practice, power imbalance between supply and demand is also common, especially when VSWT-PMSG is connected to a weak micro grid (MG). If load demand fluctuations become high, isolated MG may be unable to stabilize the frequency and voltage so that battery storage needs to be installed into the MG to adjust energy supply and demand. To allow flexible control of active and reactive power flow from/to battery storage, grid-supporting inverters are used. For a system that contains highly nonlinear components, the use of conventional linear proportional-integral-derivative (PID) controllers may cause system performance deterioration. Additionally, these controllers show slow, oscillating responses, and complex equations are required to obtain optimum responses in other controllers. To cope with these limitations, this paper proposes PID-type fuzzy controller (PIDfc) design to control grid-supporting inverter of battery. To ensure safe battery operating limits, we also propose a new controller scheme called intelligent battery protection (IBP). This IBP is integrated into PIDfc. Several simulation tests are performed to verify the scheme’s effectiveness. The results show that the proposed PIDfc controller exhibits improved performance and acceptable responses, and can be used instead of conventional controllers.

A Novel Modified Fuzzy-predictive Control of Permanent Magnet Synchronous Generator Based Wind Energy Conversion System

A wind energy conversion system(WECS)based on a permanent magnet synchronous generator(PMSG)is an effective solution for renewable energy generation in modern power systems.The main advantages of PMSG include high performance at high and low speeds,minimal control effort owing to lower rotor inertia,self-excitation,high reliability,and simplicity of structure compared with induction generators.However,the intermittent nature of wind energy implies that maximum efficiency is not obtained from this system.Accordingly,maximum power point tracking(MPPT)in wind turbine systems has been proposed to address this problem.Traditional MPPT strategies suffer from severe output power fluctuations,low efficiency,and significant ripples in turbine rotation speed.This paper presents a novel MPPT control strategy based on fuzzy logic control(FLC)and model predictive control(MPC)to extract the maximum power from a PMSG-WECS and control the machine-side and grid-side converters.The simulation results obtained from Matlab/Simulink confirm the superiority of the control model in eliminating the output power fluctuations of the wind generators and accurately tracking the maximum power point.A comparative study between conventional MPPT and control methods is also conducted.

Enhancement of DC-Link Protection of PMSG Based Wind Turbine under Network Disturbance by Using New Buck Controller System

Protection system for DC-link circuit of back-to-back converter of PMSG （Permanent Magnet Synchronous Generator） based wind turbine is essential part for the system to ride through a network fault in grid system. Voltage on the DC-link circuit can be increased significantly due to power unbalance between stator side converter and grid side converter. Increase of DC-link circuit voltage can lead to a damage of IGBT of the converter and control system failure. In this paper performance enhancement of DC-link protection of PMSG based Wind turbine by using new control system of buck converter is proposed. The buck converter is used to control supplied voltage of a breaking resistor to dissipate energy from the wind generator during network disturbance. In order to investigate effectiveness of the proposed DC-link protection system, fault analysis is performed in the simulation study by using PSCAD/EMTDC software program. In addition, comparative analysis between the proposed protection system and the conventional protection system using DC chopper is also performed.

基于VMD的风机次同步振荡模态辨识方法研究

针对变分模态分解算法在对风电并网过程中产生的次同步振荡信号进行分解时受噪声干扰、关键参数难以确定,导致的辨识精度不足问题,本文提出一种基于小波阈值去噪(WTD)和遗传算法(GA)优化变分模态分解(VMD)的信号分解算法,结合自回归滑动模型(ARMA)的次同步振荡模态辨识方法。首先,采用小波阈值对风电机组输出的有功功率进行去噪处理;其次,使用VMD对去噪后的信号进行分解,得到K个本征模态分量,为得到最优VMD分解效果,采用自适应遗传算法对惩罚因子α及模态分解层数K进行优化;最后,将信号重构并建立ARMA模型,直接辨识出次同步振荡信号的频率和阻尼比。通过仿真实验平台搭建直驱风电机组并网模型,采集次同步振荡信号进行模态辨识。仿真结果表明,与其他辨识算法相对比,所提出的基于VMD的方法具有更好的可行性和优越性。

永磁同步发电机匝间短路故障对绕组绝缘温升特性的影响

本文分析了永磁同步发电机匝间短路故障前后的绕组绝缘温升特性。首先推导了正常情况和匝间短路故障下的气隙磁通密度,相电流、铁心损耗和绕组铜耗解析表达式;然后建立了发电机三维有限元仿真模型,将电磁场中计算得到的各类损耗作为热源导入温度场计算绕组绝缘温度分布;最后实测了LR-5型故障模拟永磁同步发电机组在不同短路程度下的绕组绝缘温度,理论分析、仿真计算与实验结果相互吻合。结果表明:匝间短路故障后在故障绕组电流的作用下,绕组绝缘温度明显上升,并且随着短路程度的增加而加剧,由绕组绝缘热载荷分布不均而引起的变形、应变和应力也将增加;绕组鼻端处绝缘易因高温而受损,可通过改进冷却散热结构,或在鼻端绝缘局部涂覆耐热涂层提高鼻端绝缘的可靠性。

永磁直驱型风机海上风电送出系统不对称接地及甩负荷电磁暂态研究

为明确海上风电交流送出系统过电压的特征与水平,需考虑风电机组的故障穿越特性。该文结合永磁直驱风机变流器的控制原理,提出海上风电送出系统不对称接地过电压的解析计算方法。基于PSCAD对风电机组进行精确电磁暂态建模与故障电压穿越测试,以国内某500 kV大规模海上风电工程为背景,仿真计算送出系统不对称接地及甩负荷过电压。结果表明:系统不对称接地过电压大小与风机正负序控制策略有关;海缆电网侧甩负荷将产生持续百ms的1.3 pu以上的暂态过电压,风机过电压保护动作延时越长,暂态过电压越严重。实际海上风电工程计算需紧密联系风机控制保护策略及其参数,并综合关键设备耐压水平进行评估,通过风机控制策略优化可以降低系统过电压水平。

风储锁相弹性耦合下的系统次同步振荡抑制技术

通过虚拟刚度建立储能与风电机组锁相间的弹性连接关系是高效抑制锁相环诱发次同步振荡的关键。以机械振动力学为基础,该文首先在风电机组锁相与储能虚拟同步机之间建立相位弹性耦合关系,并定义虚拟锁相刚度。其次,引入虚拟锁相刚度,建立风储弹性系统的两自由度运动模型,分析风电机组相位的幅频响应特性,并基于固定点理论,优化设计风储间整体刚度和阻尼。再次,提出虚拟锁相刚度控制策略,将其嵌入储能虚拟同步机控制系统中,并与虚拟惯量、阻尼环节构建风储弹性耦合控制系统结构。最后,搭建风储高渗透并网仿真系统,验证增设虚拟锁相刚度后,风电机组锁相环诱发的次同步振荡能够得到有效抑制,显著提升系统的稳定性。

虚拟惯量控制对直驱风电机组载荷影响的分析及评估

针对虚拟惯量控制诱发风电机组机械载荷的问题,开展虚拟惯量控制对采用直驱永磁同步发电机(D-PMSG)的风电机组载荷影响的理论分析和仿真评估研究。从叶片、塔筒等机械结构低阶模态出发,建立虚拟惯量控制下D-PMSG线性化多体动力学模型,并通过线性化多体动力学模型分析虚拟惯量控制对机组载荷的影响机理。采用软件联合建模方法,构建涵盖永磁同步电机及其控制、电网、机械和气动特性等的D-PMSG非线性机电耦合模型。依据冲击载荷最大值、最大变化幅度百分比及等值疲劳载荷等指标,通过所建立的非线性机电耦合模型仿真分析并量化评估虚拟惯量控制对机组冲击载荷和动态疲劳载荷的影响。结果表明,D-PMSG附加虚拟惯量控制后,电网侧频率突变会使得传动轴和塔底侧向出现显著冲击载荷,且其随虚拟惯量时间常数增大而增大,在湍流风运行工况下机组传动轴和塔底侧向等值疲劳载荷较无附加虚拟惯量控制均有所减小。

不同相移角度绕组对双三相永磁同步电机电磁性能的影响分析

由于双三相永磁同步电机两套三相绕组之间可采用不同相移角度,以一台24槽22极双三相永磁同步电机为例,分析了相移角度对电机性能的影响规律.首先,基于各槽绕组磁动势间的相位关系,推导了在采用单层绕组和双层绕组时,两套三相绕组之间可行的空间相移角度,即0°、15°和30°,并对比分析了不同空间相移角度绕组产生的电枢磁动势频谱;然后,结合电枢磁动势谐波和电机电磁性能之间的关系,通过有限元仿真,验证了0°、15°和30°相移角度的绕组拓扑对不平衡磁拉力、反电势、平均转矩和转矩脉动等电磁性能的影响规律;最后,制作了2台单层和双层空间相移30°绕组的样机,并通过实验验证了理论和有限元仿真分析的正确性.结果表明:空间相移0°存在明显的不平衡磁拉力;空间相移30°电机平均转矩最大,转矩脉动最小.