Method for the posture control of bionic mechanical wheel-legged vehicles in hilly and mountainous areas

In response to the weaknesses of traditional agricultural equipment chassis with poor environmental adaptability and inferior mobility, a novel unmanned agricultural machinery chassis has been developed that can operate stably and efficiently under various complex terrain conditions. Initially, a new wheel-legged structure was designed by drawing inspiration from the motion principles of grasshopper hind legs and combining them with pneumatic-hydraulic linkage mechanisms. Kinematic analysis was conducted on this wheel-legged configuration by utilizing the D-H parameter method, which revealed that its end effector has a travel range of 0-450 mm in the X-direction, 0-840 mm in the Y-direction, and 0-770 mm in the Z-direction, thereby providing the structural foundation for features such as independent four-wheel steering, adjustable wheel track, automatic vehicle body elevation adjustment, and maintaining a level body posture on different slopes. Subsequently, theoretical analysis and structural parameter calculations were completed to design each subsystem of the unmanned chassis. Further, kinematic analysis of the wheel-legged unmanned chassis was carried out using RecurDyn, which substantiated the feasibility of achieving functions like slope leveling and autonomous obstacle negotiation. An omnidirectional leveling control system was also established, taking into account factors such as pitch angle, roll angle, virtual leg deployment, and center of gravity height. Joint simulations using Adams and Matlab were performed on the wheel-legged unmanned chassis, comparing its leveling performance with that of a PID control system. The results indicated that the maximum absolute value of leveling error was 1.08° for the pitch angle and 1.19° for the roll angle, while the standard deviations were 0.216 47° for the pitch angle and 0.176 22° for the roll angle, demonstrating that the wheel-legged unmanned chassis surpassed the PID control system in leveling performance, thus validating the correctness and feasibility of its full-directional body posture leveling control in complex environments. Finally, the wheel-legged unmanned chassis was fabricated, assembled, and subjected to in-place leveling and ground clearance adjustment tests. The experimental outcomes showed that the vehicle was capable of achieving in-place leveling with response speed and leveling accuracy meeting practical operational requirements under the action of the posture control system. Moreover, the adjustable ground clearance proved sufficient to meet the demands of actual obstacle crossing scenarios.

A Closed-Loop Dynamic Controller for Active Vibration Isolation Working on A Parallel Wheel-Legged Robot

Serving the Stewart mechanism as a wheel-legged structure,the most outstanding superiority of the proposed wheel-legged hybrid robot(WLHR)is the active vibration isolation function during rolling on rugged terrain.However,it is difficult to obtain its precise dynamic model,because of the nonlinearity and uncertainty of the heavy robot.This paper presents a dynamic control framework with a decentralized structure for single wheel-leg,position tracking based on model predictive control(MPC)and adaptive impedance module from inside to outside.Through the Newton-Euler dynamic model of the Stewart mechanism,the controller first creates a predictive model by combining Newton-Raphson iteration of forward kinematic and inverse kinematic calculation of Stewart.The actuating force naturally enables each strut to stretch and retract,thereby realizing six degrees-of-freedom(6-DOFs)position-tracking for Stewart wheel-leg.The adaptive impedance control in the outermost loop adjusts environmental impedance parameters by current position and force feedback of wheel-leg along Z-axis.This adjustment allows the robot to adequately control the desired support force tracking,isolating the robot body from vibration that is generated from unknown terrain.The availability of the proposed control methodology on a physical prototype is demonstrated by tracking a Bezier curve and active vibration isolation while the robot is rolling on decelerate strips.By comparing the proportional and integral(PI)and constant impedance controllers,better performance of the proposed algorithm was operated and evaluated through displacement and force sensors internally-installed in each cylinder,as well as an inertial measurement unit(IMU)mounted on the robot body.The proposed algorithm structure significantly enhances the control accuracy and vibration isolation capacity of parallel wheel-legged robot.

Design of A Novel Wheel-Legged Robot with Rim Shape Changeable Wheels

The wheel-legged hybrid structure has been utilized by ground mobile platforms in recent years to achieve good mobility on both flat surfaces and rough terrain.However,most of the wheel-legged robots only have one-directional obstacle-crossing ability.During the motion,most of the wheel-legged robots’centroid fluctuates violently,which damages the stability of the load.What’s more,many designs of the obstacle-crossing part and transformation-driving part of this structure are highly coupled,which limits its optimal performance in both aspects.This paper presents a novel wheel-legged robot with a rim-shaped changeable wheel,which has a bi-directional and smooth obstacle-crossing ability.Based on the kinematic model,the geometric parameters of the wheel structure and the design variables of the driving four-bar mechanism are optimized separately.The kinetostatics model of the mobile platform when climbing stairs is established to determine the body length and angular velocity of the driving wheels.A pro-totype is made according to the optimal parameters.Experiments show that the prototype installed with the novel transformable wheels can overcome steps with a height of 1.52 times of its wheel radius with less fluctuation of its centroid and performs good locomotion capabilities in different environments.

基于RobotStudio的视觉分拣打磨工作站仿真设计

为解决中小型零件混流自动化生产等问题,提出基于RobotStudio的工业机器人视觉分拣打磨工作站的仿真设计方案。根据零件的生产工艺流程,利用UG软件创建视觉分拣打磨工作站的整体布局;通过分析工作站各个模块功能,设计了各模块的结构;利用RobotStudio软件构建了工作站仿真模型。以视觉引导Smart组件和输送链跟踪仿真为例,阐述了ABB工业机器人通过视觉引导获取工件空间位姿的四元数和欧拉角的转换方法,并介绍了视觉拍照、机器人与工业相机通信等动态仿真的设置过程,以及输送链跟踪动态效果的设置方法。为实现工作站全过程仿真,设计了整体工作站逻辑,编制了仿真工作站离线程序,并将仿真工作站同步到实验平台调试验证。该设计可为智能制造生产线的设计、制造及应用提供参考。

Design and Optimization of Wheel-legged Robot:Rolling-Wolf

Though the studies of wheel-legged robots have achieved great success, the existing ones still have defects in load distribution, structure stability and carrying capacity. For overcoming these shortcomings, a new kind of wheel-legged robot（Rolling-Wolf） is designed. It is actuated by means of ball screws and sliders, and each leg forms two stable triangle structures at any moment, which is simple but has high structure stability. The positional posture model and statics model are built and used to analyze the kinematic and mechanical properties of Rolling-Wolf. Based on these two models, important indexes for evaluating its motion performance are analyzed. According to the models and indexes, all of the structure parameters which influence the motion performance of Rolling-Wolf are optimized by the method of Archive-based Micro Genetic Algorithm（AMGA） by using Isight and Matlab software. Compared to the initial values, the maximum rotation angle of the thigh is improved by 4.17%, the maximum lifting height of the wheel is improved by 65.53%, and the maximum driving forces of the thigh and calf are decreased by 25.5% and 12.58%, respectively. The conspicuous optimization results indicate that Rolling-Wolf is much more excellent. The novel wheel-leg structure of Rolling-Wolf is efficient in promoting the load distribution, structure stability and carrying capacity of wheel-legged robot and the proposed optimization method provides a new approach for structure optimization.

Dynamics and Wheel's Slip Ratio of a Wheel-legged Robot in Wheeled Motion Considering the Change of Height

The existing research on dynamics and slip ratio of wheeled mobile robot （WMR） are derived without considering the effect of height, and the existing models can not be used to analyze the dynamics performance of the robot with variable height while moving such as NOROS- Ⅱ. The existing method of dynamics modeling is improved by adding the constraint equation between perpendicular displacement of body and horizontal displacement of wheel into the constraint conditions. The dynamic model of NOROS- Ⅱ in wheel motion is built by the Lagrange method under nonholonomic constraints. The inverse dynamics is calculated in three different paths based on this model, and the results demonstrate that torques of hip pitching joints are inversely proportional to the height of robot. The relative error of calculated torques is less than 2% compared with that of ADAMS simulation, by which the validity of dynamic model is verified, Moreover, the relative horizontal motion between fore/hind wheels and body is produced when the height is changed, and thus the accurate slip ratio can not be obtained by the traditional equation. The improved slip ratio equations with the parameter of the vertical velocity of body are introduced for fore wheels and hind wheels respectively. Numerical simulations of slip ratios are conducted to reveal the effect of varied height on slip ratios of different wheels. The result shows that the slip ratios of fore/hind wheels become larger/smaller respectively as the height increases, and as the height is reduced, the reverse applies. The proposed research of dynamic model and slip ratio based on the robot height provides the effective method to analyze the dynamics of WMRs with varying height.

Wheel-legged Hexapod Robots:a Multifunctional Mobile Manipulating Platform

Robots are widely used to replace people in some burdensome or hamaful areas. Not only the moving ability but also the manipulating ability is needed in the missions of complex multitasking requirements. In the last decades, wheel-legged hexapod robots are extensively studied to ineet this condition.

The evolution of robotics:research and application progress of dental implant robotic systems

The use of robots to augment human capabilities and assist in work has long been an aspiration.Robotics has been developing since the 1960s when the first industrial robot was introduced.As technology has advanced,robotic-assisted surgery has shown numerous advantages,including more precision,efficiency,minimal invasiveness,and safety than is possible with conventional techniques,which are research hotspots and cutting-edge trends.This article reviewed the history of medical robot development and seminal research papers about current research progress.Taking the autonomous dental implant robotic system as an example,the advantages and prospects of medical robotic systems would be discussed which would provide a reference for future research.

基于Robotstudio的工业机器人课程教学设计与实践

阐述工业机器人实训课程教学实践,将Robotstudio软件融入课程教学中,探讨以实例项目驱动的教学内容设计,以虚实结合手段提升课堂教学效果的教学模式,从而实现教学与实践的统一。

Design and motion analysis of reconfigurable wheel-legged mobile robot

An adaptive wheel-legged shape reconfigurable mobile robot,based on a scissor-like mechanism,is proposed for an obstacle detecting and surmounting robot,moving on complex terrain.The robot can dynamically adjust its own shape,according to the environment,realizing a transformation of wheel shape into leg shape and vice versa.Each wheel-legged mechanism has one degree of freedom,which means that only the relative motion of the inner and outer discs is needed to achieve the transformation of the shape into a wheel or a leg.First,the force analysis of the conversion process of the wheel-legged mechanism is carried out,while the relationship between the driving torque and the friction factor in the non-conversion trigger stage and in the conversion trigger stage is obtained.The results showed that the shape conversion can be better realized by increasing the friction factor of the trigger point.Next,the kinematics analysis of the robot,including climbing the obstacles,stairs and gully,is carried out.The motion of the spokes tip is obtained,in order to derive the folding ratio and the surmountable obstacle height of the wheel-legged mechanism.The parameters of the wheel-legged structure are optimized,to obtain better stability and obstacle climbing ability.Finally,a dynamic simulation model is established by ADAMS,to verify the obstacle climbing performance and gait rationality of the robot,in addition to a prototype experiment.The results showed that the surmountable obstacle height of the robot is about3.05 times the spoke radius.The robot has the stability of a traditional wheel mechanism and the obstacle surmount performance of a leg mechanism,making it more suitable for field reconnaissance and exploration missions.

Treatment of hemolymphangioma by robotic surgery: A case report

BACKGROUND Hemolymphangioma of the jejunum is rare and lacks clinical specificity,and can manifest as gastrointestinal bleeding,abdominal pain,and intestinal obstruction.Computed tomography,magnetic resonance imaging,and other examinations show certain characteristics of the disease,but lack accuracy.Although capsule endoscopy and enteroscopy make up for this deficiency,the diagnosis also still re-quires pathology.CASE SUMMARY A male patient was admitted to the hospital due to abdominal distension and abdominal pain,but a specific diagnosis by computed tomography examination was not obtained.Partial resection of the small intestine was performed by robotic surgery,and postoperative pathological biopsy confirmed the diagnosis of hemo-lymphangioma.No recurrence in the follow-up examination was observed.CONCLUSION Robotic surgery is an effective way to treat hemolymphangioma through minima-lly invasive techniques under the concept of rapid rehabilitation.

Summarizing the evidence for robotic-assisted bladder neck reconstruction: Systematic review of patency and incontinence outcomes

Objective:Bladder neck contracture and vesicourethral anastomotic stenosis are difficult to manage endoscopically,and open repair is associated with high rates of incontinence.In recent years,there have been increasing reports of robotic-assisted bladder neck reconstruction in the literature.However,existing studies are small,heterogeneous case series.The objective of this study was to perform a systematic review of robotic-assisted bladder neck reconstruction to better evaluate patency and incontinence outcomes.Methods:We performed a systematic review of PubMed from first available date to May 2023 for all studies evaluating robotic-assisted reconstructive surgery of the bladder neck in adult men.Articles in non-English,author replies,editorials,pediatric-based studies,and reviews were excluded.Outcomes of interest were patency and incontinence rates,which were pooled when appropriate.Results:After identifying 158 articles on initial search,we included only ten studies that fit all aforementioned criteria for robotic-assisted bladder neck reconstruction.All were case series published from March 2018 to March 2022 ranging from six to 32 men,with the median follow-up of 5e23 months.A total of 119 patients were included in our analysis.A variety of etiologies and surgical techniques were described.Patency rates ranged from 50%to 100%,and pooled patency was 80%(95/119).De novo incontinence rates ranged from 0%to 33%,and pooled incontinence was 17%(8/47).Our findings were limited by small sample sizes,relatively short follow-ups,and heterogeneity between studies.

Adaptive Trajectory Tracking Control for Nonholonomic Wheeled Mobile Robots:A Barrier Function Sliding Mode Approach

The trajectory tracking control performance of nonholonomic wheeled mobile robots(NWMRs)is subject to nonholonomic constraints,system uncertainties,and external disturbances.This paper proposes a barrier function-based adaptive sliding mode control(BFASMC)method to provide high-precision,fast-response performance and robustness for NWMRs.Compared with the conventional adaptive sliding mode control,the proposed control strategy can guarantee that the sliding mode variables converge to a predefined neighborhood of origin with a predefined reaching time independent of the prior knowledge of the uncertainties and disturbances bounds.Another advantage of the proposed algorithm is that the control gains can be adaptively adjusted to follow the disturbances amplitudes thanks to the barrier function.The benefit is that the overestimation of control gain can be eliminated,resulting in chattering reduction.Moreover,a modified barrier function-like control gain is employed to prevent the input saturation problem due to the physical limit of the actuator.The stability analysis and comparative experiments demonstrate that the proposed BFASMC can ensure the prespecified convergence performance of the NWMR system output variables and strong robustness against uncertainties/disturbances.

基于Robot Studio的分类码垛仿真设计

针对工业机器人轨迹规划和自动化生产协调难度大的问题,提出一种基于Robot Studio的分类码垛仿真设计方案。使用Robot Studio软件,创建工业机器人仿真工作站。通过Smart组件的设计、I/O信号的设定、工作站逻辑的建立和程序编写等工作,最终实现工业机器人智能分类码垛操作。经过模拟仿真,结果表明:分类码垛的速度和准确率均可达到预期要求。说明该分类码垛设计方案可行,可以为实际码垛工作站的搭建和生产提供一定的现实指导。

Robotic surgery in living liver donors and liver recipients

There have been nearly 60 years since Thomas Starzl’s first liver transplant.During this period,advancements in medical technology have progressively enabled the adoption of new methods for transplantation.Among these innovations,robotic surgery has emerged in recent decades and is gradually being integrated into transplant medicine.Robotic hepatectomy and liver implantation represent significant advancements in the field of transplant surgery.The precision and minimally invasive nature of robotic surgery offer substantial benefits for both living donors and recipients.In living donors,robotic hepatectomy reduces postoperative pain,minimizes scarring,and accelerates recovery.For liver recipients,robotic liver implantation enhances surgical accuracy,leading to better graft positioning and vascular anastomosis.Robotic systems provide more precise and maneuverable control of instruments,allowing surgeons to perform complex procedures with greater accuracy and reduced risk to patients.This review encompasses publications on minimally invasive donor liver surgery,with a specific focus on robotic liver resection in transplantation,and aims to summarize current knowledge and the development status of robotic surgery in liver transplantation,focusing on liver resection in donors and graft implantation in recipients.

Managerial perspectives of scaling up robotic-assisted surgery in healthcare systems:A systematic literature review

Objectives Robotic-assisted surgery(RAS)is a minimally invasive technique practiced in multiple specialties.Standard training is essential for the acquisition of RAS skills.The cost of RAS is considered to be high,which makes it a burden for institutes and unaffordable for patients.This systematic literature review(SLR)focused on the various RAS training methods applied in different surgical specialties,as well as the cost elements of RAS,and was to summarize the opportunities and challenges associated with scaling up RAS.Methods An SLR was carried out based on the Preferred Reporting Items for Systematic reviews and Meta-Analyses reporting guidelines.The PubMed,EBSCO,and Scopus databases were searched for reports from January 2018 through January 2024.Full-text reviews and research articles in the English language from Asia-Pacific countries were included.Articles that outlined training and costs associated with RAS were chosen.Results The most common training system is the da Vinci system.The simulation technique,which includes dry-lab,wet-lab,and virtual reality training,was found to be a common and important practice.The cost of RAS encompasses the installation and maintenance costs of the robotic system,the operation theatre rent,personnel cost,surgical instrument and material cost,and other miscellaneous charges.The synthesis of SLR revealed the challenges and opportunities regarding RAS training and cost.Conclusions The results of this SLR will help stakeholders such as decision-makers,influencers,and end users of RAS to understand the significance of training and cost in scaling up RAS from a managerial perspective.For any healthcare innovation to reach a vast population,cost-effectiveness and standard training are crucial.

Direct 4D printing of functionally graded hydrogel networks for biodegradable,untethered,and multimorphic soft robots

Recent advances in functionally graded additive manufacturing(FGAM)technology have enabled the seamless hybridization of multiple functionalities in a single structure.Soft robotics can become one of the largest beneficiaries of these advances,through the design of a facile four-dimensional(4D)FGAM process that can grant an intelligent stimuli-responsive mechanical functionality to the printed objects.Herein,we present a simple binder jetting approach for the 4D printing of functionally graded porous multi-materials(FGMM)by introducing rationally designed graded multiphase feeder beds.Compositionally graded cross-linking agents gradually form stable porous network structures within aqueous polymer particles,enabling programmable hygroscopic deformation without complex mechanical designs.Furthermore,a systematic bed design incorporating additional functional agents enables a multi-stimuli-responsive and untethered soft robot with stark stimulus selectivity.The biodegradability of the proposed 4D-printed soft robot further ensures the sustainability of our approach,with immediate degradation rates of 96.6%within 72 h.The proposed 4D printing concept for FGMMs can create new opportunities for intelligent and sustainable additive manufacturing in soft robotics.

Smart Gait:A Gait Optimization Framework for Hexapod Robots

The current gait planning for legged robots is mostly based on human presets,which cannot match the flexible characteristics of natural mammals.This paper proposes a gait optimization framework for hexapod robots called Smart Gait.Smart Gait contains three modules:swing leg trajectory optimization,gait period&duty optimization,and gait sequence optimization.The full dynamics of a single leg,and the centroid dynamics of the overall robot are considered in the respective modules.The Smart Gait not only helps the robot to decrease the energy consumption when in locomotion,mostly,it enables the hexapod robot to determine its gait pattern transitions based on its current state,instead of repeating the formalistic clock-set step cycles.Our Smart Gait framework allows the hexapod robot to behave nimbly as a living animal when in 3D movements for the first time.The Smart Gait framework combines offline and online optimizations without any fussy data-driven training procedures,and it can run efficiently on board in real-time after deployment.Various experiments are carried out on the hexapod robot LittleStrong.The results show that the energy consumption is reduced by 15.9%when in locomotion.Adaptive gait patterns can be generated spontaneously both in regular and challenge environments,and when facing external interferences.

Assistive Robotics for Upper Limb Physical Rehabilitation:A Systematic Review and Future Prospects

Physical assistive robotics are oriented to support and improve functional capacities of people.In physical rehabilitation,robots are indeed useful for functional recovery of affected limb.However,there are still open questions related to technological aspects.This work presents a systematic review of upper limb rehabilitation robotics in order to analyze and establish technological challenges and future directions in this area.A bibliometric analysis was performed for the systematic literature review.Literature from the last six years,conducted between August 2020 and May 2021,was reviewed.The methodology for the literature search and a bibliometric analysis of the metadata are presented.After a preliminary search resulted in 820 articles,a total of 66 articles were included.A concurrency network and bibliographic analysis were provided.And an analysis of occurrences,taxonomy,and rehabilitation robotics reported in the literature is presented.This review aims to provide to the scientific community an overview of the state of the art in assistive robotics for upper limb physical rehabilitation.The literature analysis allows access to a gap of unexplored options to define the technological prospects applied to upper limb physical rehabilitation robotics.

Intuitive Human-Robot-Environment Interaction With EMG Signals:A Review

A long history has passed since electromyography(EMG)signals have been explored in human-centered robots for intuitive interaction.However,it still has a gap between scientific research and real-life applications.Previous studies mainly focused on EMG decoding algorithms,leaving a dynamic relationship between the human,robot,and uncertain environment in real-life scenarios seldomly concerned.To fill this gap,this paper presents a comprehensive review of EMG-based techniques in human-robot-environment interaction(HREI)systems.The general processing framework is summarized,and three interaction paradigms,including direct control,sensory feedback,and partial autonomous control,are introduced.EMG-based intention decoding is treated as a module of the proposed paradigms.Five key issues involving precision,stability,user attention,compliance,and environmental awareness in this field are discussed.Several important directions,including EMG decomposition,robust algorithms,HREI dataset,proprioception feedback,reinforcement learning,and embodied intelligence,are proposed to pave the way for future research.To the best of what we know,this is the first time that a review of EMG-based methods in the HREI system is summarized.It provides a novel and broader perspective to improve the practicability of current myoelectric interaction systems,in which factors in human-robot interaction,robot-environment interaction,and state perception by human sensations are considered,which has never been done by previous studies.