Multi-scenario Simulation for 2060 and Driving Factors of the Eco-spatial Carbon Sink in the Beibu Gulf Urban Agglomeration, China

Since China announced its goal of becoming carbon-neutral by 2060, carbon neutrality has become a major target in the development of China's urban agglomerations. This study applied the Future Land Use Simulation(FLUS) model to predict the land use pattern of the ecological space of the Beibu Gulf urban agglomeration, in 2060 under ecological priority, agricultural priority and urbanized priority scenarios. The Integrated Valuation of Ecosystem Services and Trade-offs(In VEST) model was employed to analyse the spatial changes in ecological space carbon storage in each scenario from 2020 to 2060. Then, this study used a Geographically Weighted Regression(GWR) model to determine the main driving factors that influence the changes in land carbon sinking capacity. The results of the study can be summarised as follows: firstly, the agricultural and ecological priority scenarios will achieve balanced urban expansion and environmental protection of resources in an ecological space. The urbanized priority scenario will reduce the carbon sinking capacity. Among the simulation scenarios for 2060, carbon storage in the urbanized priority scenario will decrease by 112.26 × 10^(6) t compared with that for 2020 and the average carbon density will decrease by 0.96 kg/m^(2) compared with that for 2020. Carbon storage in the agricultural priority scenario will increase by 84.11 × 10^(6) t, and the average carbon density will decrease by 0.72 kg/m^(2). Carbon storage in the ecological priority scenario will increase by 3.03 × 10^(6) t, and the average carbon density will increase by 0.03 kg/m^(2). Under the premise that the population of the town will increases continuously, the ecological priority development approach may be a wise choice.Secondly, slope, distance to river and elevation are the most important factors that influence the carbon sink pattern of the ecological space in the Beibu Gulf urban agglomeration, followed by GDP, population density, slope direction and distance to traffic infrastructure.At the same time, urban space expansion is the main cause of the changes of this natural factors. Thirdly, the decreasing trend of ecological space is difficult to reverse, so reasonable land use policy to curb the spatial expansion of cities need to be made.

Influence of adverse weather on drivers’ perceived risk during car following based on driving simulations

Adverse weather has a considerable impact on the behavior of drivers,which puts vehicles and drivers in hazardous situations that can easily cause traffic accidents.This research examines how drivers'perceived risk changes during car following under different adverse weather conditions by using driving simulation experiment.An expressway road scenario was built in a driving simulator.Eleven types of weather conditions,including clear sky,four levels of fog,four levels of rain and two levels of snow,were designed.Furthermore,to simulate the carfollowing behavior,three car-following situations were designed according to the motion of the lead car.Seven car-following indicators were extracted based on risk homeostasis theory.Then,the entropy weight method was used to integrate the selected indicators into an index to represent the drivers'perceived risk.Multiple linear regression was applied to measure the influence of adverse weather conditions on perceived risk,and the coefficients were considered as indicators.The results demonstrate that both the weather conditions and road type have significant effects on car-following behavior.Drivers'perceived risk tends to increase with the worsening weather conditions.Under conditions of extremely poor visibility,such as heavy dense fog,the measured drivers'perceived risk is low due to the difficulties in vehicle operation and limited visibility.

Virtual Reality Driving Simulation for Measuring Driver Behavior and Characteristics

This article provides new insights regarding driver behavior, techniques and adaptability. This study has been done because: 1) driving a vehicle is critical and one of the most common daily tasks;2) simulators are used for the purpose of training and researching driver behavior and characteristics;3) the article addresses driver experience by involving new virtual reality technologies. A simulator has been used to assist novice drivers to learn how to drive in a very safe environment, and researching and collecting data for researchers has become easier due to this secure and user-friendly environment. The theoretical framework of this driving simulation has been designed by using the Unity3D game engine (5.4.f3 version) and was programmed with the C# programming language. To make the driving environment more realistic we, in addition, utilized the HTC Vive Virtual reality headset which is powered by Steamvr. We used Unity Game Engine to design our scenarios and maps because by doing this we are able to be more flexible with designing. In this study, we asked 10 people ranging from ages 19 - 37 to participate in this experiment. Four Japanese divers and six non-Japanese drivers engaged in this study, some of which do not have a driver’s license in Japan. A few Japanese drivers have a license and car, while others have a license but no car. In order to analyze the results of this experiment we are used MatlabR2016b to analyze the gathered data. The result of this research indicates that individual’s behavior and characteristics such as controlling the speed, remaining calm and relaxed when driving, driving at appropriate speeds depending on changes in road structures and etc. can affect their driving performance.

NUMERICAL SIMULATION OF FLOW FIELD BETWEEN FRICTIONAL PAIRS IN HYDROVISCOUS DRIVE SURFACE

The flow field of the oil film between frictional pairs in the hydroviscous drive test rig is investigated. A three-dimensional Navier-Stokes（N-S） equation considering viscous force and inertial force rather than Reynolds equation or modified Reynolds equation is presented to model the flow field. Pressure and temperature distribution in radial and circumferential direction under three different conditions, i.e., isothermal, that considering viscosity-temperature characteristic as well as shear thinning non-Newtonian fluid are simulated, respectively, by utilizing the commercial computational fluid dynamics（CFD） software FLUENT. The results reveal that the grooves on the driven plate make the pressure, temperature distribution present periodic variation. The oil temperature and shear rate have important effects on the flow field between frictional pairs, and the oil temperature is more important parameter. The simulation results lay a theoretical foundation for the reasonable designs ofhydroviscous drive.

Performance Study Based on Inner Flow Field Numerical Simulation of Magnetic Drive Pumps with Different Rotate Speeds

Magnetic drive pump has gotten great achievement and has been widely used in some special fields. Currently, the researches on magnetic drive pump have focused on hydraulic design, bearing, axial force in China, and a new magnetic drive pump with low flow and high head have been developed overseas. However, low efficiency and large size are the common disadvantages for the magnetic drive pump. In order to study the performance of high-speed magnetic drive pump, FLUENT was used to simulate the inner flow field of magnetic drive pumps with different rotate speeds, and get velocity and pressure distributions of inner flow field. According to analysis the changes of velocity and pressure to ensure the stable operation of pump and avoid cavitation. Based on the analysis of velocity and pressure, this paper presents the pump efficiency of magnetic drive pumps with different rotated speeds by calculating the power loss in impeller and volute, hydraulic loss, volumetric loss, mechanical loss and discussing the different reasons of power loss between the magnetic drive pumps with different rotated speeds. In addition, the magnetic drive pumps were tested in a closed testing system. Pressure sensors were set in inlet and outlet of magnetic drive pumps to get the pressure and the head, while the pump efficiency could be got by calculating the power loss between the input power and the outlet power. The results of simulation and test were similar, which shows that the method of simulation is feasible. The proposed research provides the instruction to design high-speed magnetic drive pump.

Meshing Theoretical Study and Simulation on Cylindrical Tri-sine Oscillating Tooth Gear Drive

The structure of cylindrical tri-sine oscillating tooth gear drive is presented. Based on the space meshing theory, equations of meshing and tooth profile are established and its meshing theory is studied. Using Pro/E, this system is modeled and simulated,which is compared with the above-established equations.

Development of a Driving Simulator with Analyzing Driver’s Characteristics Based on a Virtual Reality Head Mounted Display

Driving a vehicle is one of the most common daily yet hazardous tasks. One of the great interests in recent research is to characterize a driver’s behaviors through the use of a driving simulation. Virtual reality technology is now a promising alternative to the conventional driving simulations since it provides a more simple, secure and user-friendly environment for data collection. The driving simulator was used to assist novice drivers in learning how to drive in a very calm environment since the driving is not taking place on an actual road. This paper provides new insights regarding a driver’s behavior, techniques and adaptability within a driving simulation using virtual reality technology. The theoretical framework of this driving simulation has been designed using the Unity3D game engine (5.4.0f3 version) and programmed by the C# programming language. To make the driving simulation environment more realistic, the HTC Vive Virtual reality headset, powered by Steamvr, was used. 10 volunteers ranging from ages 19 - 37 participated in the virtual reality driving experiment. Matlab R2016b was used to analyze the data obtained from experiment. This research results are crucial for training drivers and obtaining insight on a driver’s behavior and characteristics. We have gathered diverse results for 10 drivers with different characteristics to be discussed in this study. Driving simulations are not easy to use for some users due to motion sickness, difficulties in adopting to a virtual environment. Furthermore, results of this study clearly show the performance of drivers is closely associated with individual’s behavior and adaptability to the driving simulator. Based on our findings, it can be said that with a VR-HMD (Virtual Reality-Head Mounted Display) Driving Simulator enables us to evaluate a driver’s “performance error”, “recognition errors” and “decision error”. All of which will allow researchers and further studies to potentially establish a method to increase driver safety or alleviate “driving errors”.

Simulation study of blast fume diffusion characters of driving face

Based on FLUENT software, studied the blast fume diffusion characteristics of a driving face under 8 situations, and analyzed the influence to fume diffusion of different drift length and different ventilation pipe outlet positions. Through regression analysis, functions of ventilation time to the drift length and ventilation pipe outlet position was obtained.

Numerical simulation and actual research on safety and suitable position of roadway driving along next goaf

In view of the stress concentration problem left by the joint coal seams mining since the reservation of the coal pillar, it was proposed that non-pillar mining technology be used in Dongrong No.2 coal mine. The numerical simulation software FLAG2D was used to draw the relationship between surrounding rock deformation of roadway driving along next goaf and the size of the coal pillar, so the safety and suitable position of roadway was determined. The distribution of lateral abutment pressure was measured by using the ZYJ-30 drilling stress gauge in the coal wall. The conclusions of the numerical simulation were verified.

PERFORMANCE SIMULATION OF VEHICLES EQUIPPED WITH TRACTION DRIVE CVTS

A computer model for the performance simulation of vehicles equipped with traction drive continuously variable transmission （CVT） is presented. The model integrates the traction drive CVT subsystem into an existing overall vehicle system. The characteristics of engine output torque are formulated using neural networks, and torque converter is modeled using lookup tables. Component inputs and outputs are coupled in the dynamic equations and interfaces in the powertrain system. The model simulation can provide evaluation of vehicle performance in drivability, fuel economy and emission levels for various drive ranges prior to the prototyping of the vehicle. As a design tool, the model assists engineers in understanding the effect ofpowertrain components on vehicle performance and making decisions in the selection of key design parameters. The model is implemented in the MATLAB/Simulink environment. The performance simulation of a test vehicle is included as a numerical example to illustrate the effectiveness of the model.

Design and Simulation for the Pulse High-Voltage DC Power Supply (HVPS) of 1.2 MW/2.45 GHz HT-7U Lower Hybrid Current Drive System

The superconducting tokamak HT-7U [1] has been designed by the Institute of Plasma Physics since 1998 and will be set up before 2003. The 1.2 MW /2.45 GHz HT-7U LHCD (Lower hybrid current drive) system which being the most efficient non-induction device can heat the plasma and drive the plasma current has been efficiently in operation 'owl and a particular design of the 2.8 MW/-35 kV high-voltage DC power supply has been already completed and will apply to the klystron of LHCD on HT-7 and the future HT-7U, and the project of the power supply has been examined and approved professionally by an authorized group of high-level specialist in the institute of Plasma Physics. The detailed design of the power supply and the simulation results are referred in the paper.

New dynamic permeability upscaling method for flow simulation under depletion drive and no-crossflow conditions

The main purpose of upscaling in reservoir simulation is to capture the dynamic behavior of fine scale models at the coarse scale. Traditional static or dynamic methods use assumptions about the boundary conditions to determine the upscaled properties, in this paper, we show that the upscaled properties are strongly dependent on the flow process observed at the fine scale. We use a simple no- crossflow depletion drive process and demonstrate that an upscaled property is not a constant value. Instead, if the goal is to match the performance of the fine scale model, the upscaled permeability changes with time. We provide an analytical solution to determine the upscaled permeability and present the value of upscaled permeability under limiting conditions. Our equation suggests that it is possible that upscaled value can fall outside the range of fine scale values under certain conditions. We show that for pseudo steady state flow, using common averaging methods like arithmetic or even geometric averaging methods can lead to optimistic results. We also show that the no-crossflow solution is significantly different than crossflow solution at late times. We validate our method by comparing the results of the method with flow simulation results in two and multi-layered models.

Development of driver-vehicle-road closed-loop semi-physical simulation system

As hybrid vehicles introduced the motor, the vehicle structure has a significant change in the power matching. A driver-vehicle-road closed-loop semi-physical simulation system, which makes real driving parts together with the simulation car, will bring convenience to the new car design. We used the computer software to simulate the road with a slope, curve and some other features based on the actual road condition, and analyzed the whole road scene in addition to geometry and physical characteristics. Analyzing and constructing the vehicle dynamics basic template, appropriate changes to the template can obtain the desired vehicle dynamics model with an external device to control the model vehicle. It combined the physical operation system with visual display, which gave us real driving feelings and increased the vehicle design predictive accuracy.

Driving Cycle for Motorcycle Using Micro-Simulation Model

Driving cycle of vehicle has been used in emission estimation and fuel consumption study. Existing method of data collection using car chasing technique is expensive. The technique using micro simulation approach is cheaper and fast to derive the driving cycle. In this paper a traffic simulation model Driving Cycle Micro-Simulation Model for Motorcycle has been developed. The issue of lateral and longitudinal movement aspect in motorcycle driving has been examined in the model. Parameters to cover such movement have been built in the model and applied on a stretch in Edinburgh city of Scotland. Results from model have been both calibrated and validated. The results show that Driving Cycle Micro-Simulation Model for Motorcycle gives better representation of driving cycle and it can be used to understand the effect of driving modes on emission for better understanding of vehicular emission control.

Preliminary Design, Drive-Cycle Simulation and Energy Analysis of a Hybrid Transit Bus

Modern metropolises are increasingly affected by air quality problems. Transportation is one of the largest sources of several pollutants emissions, such as nitrogen oxides (NOx) and carbon monoxide (CO). Today in the EU, vehicles' emissions are strictly limited by Euro 6 norm-Euro VI for heavy-duty vehicles-which is periodically upgraded. To match such limits, manufacturers are forced in developing new technologies to perform new sustainable vehicles design strategies, such as EVs and HEVs. Present work's aim is to provide the design of series-hybrid urban transportation bus, equipped with a novel thermal power unit, namely a small gas turbine, to exploit its cleaner combustion process in comparison with an ICE. The control logic is described, while the main drivetrain components are chosen, and suitable models from suppliers are selected as well. Then, some simulations of the resulting vehicle are performed on opportune drive cycles, using Advisor, a free software based on Matlab-Simulink environment, published by US' National Renewable Energy Laboratory (NREL). Two different final configurations are environmentally and economically analysed, with the thermal power unit being respectively fuelled by compressed natural gas (CNG) and liquefied petroleum gas (LPG). Both satisfy the Euro VI norms, showing a substantial emission reduction (-89% and -43% in CO and THC releases respectively) in comparison to pollutants' threshold values.

Multiple Purpose Simulation for Electric Vehicles

Aim Toshorten integral design period of electric vehicles Methods The electric vehicle simulation program(EVSP), a modular user-friendly program which is written in Borland C++ OWL for Windows was developed. Results EVSP allows simulating the dynamic and the economy performance of electric vehicles.EVSP provides many kinds of data input module,a large components library of electric vehicles and several kinds of speed cycle with these library,it is easily to develop a new concept of different drive trains or even to compare or improve the existing electric vehicles. The paper simulated the performance of YW6120DD Electric Bus, and analyzed the test results comparing with simulation results Conclusion The simulation results indicate that the EVSP may contribute to the developments of electric vehicles in general and the definition of the optimal match management in the drive train in particular.

基于Simulation内置式传动滚筒的有限元分析

传动滚筒是带式输送机传递动力的主要部件,其设计质量至关重要。设计了一种电动机置于驱动滚筒外、减速装置置于驱动滚筒内的新型驱动装置——内置式传动滚筒。利用SolidWorks对传动滚筒体进行三维建模,并且通过有限元分析软件Simulation对传动滚筒体进行有限元分析,从而达到优化设计的目的。

Analyzing influence of bicycles on traffic flow using microscopic simulation approach

Mixed traffic consisting of cars and bicycles is a typical pattern of urban traffic in China. To study the impact of bicycles on traffic performance, a microscopic simulating model based on the principle of cautious driving and collision free was proposed. The interaction between cars and bicycles were described by lateral friction and overlapping driving. The dynamical features of speed and time-headway were investigated by numerical simulations. The results show that bicycles have a significant impact on travel speed and time-headway. The effect of bicycles can cause different results in the free flow phase and congestion phase respectively. The results also indicate the necessity to mitigate the interaction between motorized vehicles and non-motorized vehicles.

NUMERICAL SIMULATION OF STRESS-STRAIN DISTRIBUTIONS FOR WELD METAL SOLIDIFICATION CRACKING IN STAINLESS STEEL

This paper analyzed the characteristics of welding solidification crack of stainless steels,and clearly re- vealed the the of the deformation in the molten - the pool and the solidification shrinkage on the stress - strain fields in the trail of molten - weld pool.Moreover, rheologic properties of the alloys in solid - liquid zone were also obtained by measuring the hading and unloading deform curves of the steels.As a result, a numerical model for simulation of stress - strain distributions of welding solidifi- cation crack was developed. On the basis of the model,the thesis simulated the driving force of solidifi- cation crack of stainless steels, that is, stress - strain fields in the trail of molten-weld pool with fi- nite element method.