Power Consumption Characteristics Research on Mobile System of Electrically Driven Large-Load-Ratio Six-Legged Robot

The electrically driven large-load-ratio six-legged robot with engineering capability can be widely used in outdoor and planetary exploration.However,due to the particularity of its parallel structure,the effective utilization rate of energy is not high,which has become an important obstacle to its practical application.To research the power consumption characteristics of robot mobile system is beneficial to speed up it toward practicability.Based on the configuration and walking modes of robot,the mathematical model of the power consumption of mobile system is set up.In view of the tripod gait is often selected for the six-legged robots,the simplified power consumption model of mobile system under the tripod gait is established by means of reducing the dimension of the robot’s statically indeterminate problem and constructing the equal force distribution.Then,the power consumption of robot mobile system is solved under different working conditions.The variable tendencies of the power consumption of robot mobile system are respectively obtained with changes in the rotational angles of hip joint and knee joint,body height,and span.The articulated rotational zones and the ranges of body height and span are determined under the lowest power consumption.According to the walking experiments of prototype,the variable tendencies of the average power consumption of robot mobile system are respectively acquired with changes in duty ratio,body height,and span.Then,the feasibility and correctness of theory analysis are verified in the power consumption of robot mobile system.The proposed analysis method in this paper can provide a reference on the lower power research of the large-load-ratio multi-legged robots.

Method for Analyzing Articulated Torques of Heavy-duty Six-legged Robot

The accuracy of an articulated torque analysis influences the comprehensive performances of heavy-duty multi-legged robots. Currently, the extremal estimation method and some complex methods are employed to calculate the articulated torques, which results in a large safety margin or a large number of calculations. To quickly obtain accurate articulated torques, an analysis method for the articulated torque is presented for an electrically driven heavy-duty six-legged robot. First, the rearmost leg that experiences the maximum normal contact force is confirmed when the robot transits a slope. Based on the ant-type and crab-type tripod gaits, the formulas of classical mechanics and MATLAB software are employed to theoretically analyze the relevant static torques of the joints. With the changes in the joint angles for the abductor joint, hip joint, and knee joint, variable tendency charts and extreme curves are obtained for the static articulated torques. Meanwhile, the maximum static articulated torques and the corresponding poses of the robot are also obtained. According to the poses of the robot under the maximum static articulated torques, ADAMS software is used to carry out a static simulation analysis. Based on the relevant simulation curves of the articulated torques, the maximum static articulated torques are acquired. A comparative analysis of the maximum static articulated torques shows that the theoretical calculation values are higher than the static simulation values, and the maximum error value is approximately 10%. The proposed method lays a foundation for quickly determining accurate articulated torques to develop heavy-duty six-legged robots.

Novel Door-opening Method for Six-legged Robots Based on Only Force Sensing

Current door-opening methods are mainly developed on tracked, wheeled and biped robots by applying multi-DOF manipulators and vision systems. However, door-opening methods for six-legged robots are seldom studied, especially using 0-DOF tools to operate and only force sensing to detect. A novel door-opening method for six-legged robots is developed and imple- mented to the six-parallel-legged robot. The kinematic model of the six-parallel-legged robot is established and the model of measuring the positional relationship between the robot and the door is proposed. The measurement model is completely based on only force sensing. The real- time trajectory planning method and the control strategy are designed. The trajectory planning method allows the maximum angle between the sagittal axis of the robot body and the normal line of the door plane to be 45°. A 0-DOF tool mounted to the robot body is applied to operate. By integrating with the body, the tool has 6 DOFs and enough workspace to operate. The loose grasp achieved by the tool helps release the inner force in the tool. Experiments are carried out to validate the method. The results show that the method is effective and robust in opening doors wider than 1 m. This paper proposes a novel door-opening method for six-legged robots, which notably uses a O-DOF tool and only force sensing to detect and open the door.

Static Force Analysis of Foot of Electrically Driven Heavy-Duty Six-Legged Robot under Tripod Gait

The electrically driven six-legged robot with high carrying capacity is an indispensable equipment for planetary exploration, but it hinders its practicability because of its low efficiency of carrying energy. Meanwhile, its load capacity also affects its application range. To reduce the power consumption, increase the load to mass ratio, and improve the stability of robot, the relationship between the walking modes and the forces of feet under the tripod gait are researched for an electrically driven heavy-duty six-legged robot. Based on the configuration characteristics of electrically driven heavy-duty six-legged, the typical walking modes of robot are analyzed. The mathematical models of the normal forces of feet are respectively established under the tripod gait of typical walking modes. According to the MATLAB software, the variable tendency charts are respectively gained for the normal forces of feet. The walking experiments under the typical tripod gaits are implemented for the prototype of electrically driven heavy-duty six-legged robot. The variable tendencies of maximum normal forces of feet are acquired. The comparison results show that the theoretical and experimental data are in the same trend. The walking modes which are most available to realize the average force of distribution of each foot are confirmed. The proposed method of analyzing the relationship between the walking modes and the forces of feet can quickly determine the optimal walking mode and gait parameters under the average distribution of foot force, which is propitious to develop the excellent heavy-duty multi-legged robots with the lower power consumption, larger load to mass ratio, and higher stability.

Typical Gait Analysis of a Six-legged Robot in the Context of Metamorphic Mechanism Theory

The equivalent mechanism of the system is often considered as one specific mechanism in most existing studies of multi-legged robots, however the equivalent mechanism is varying while the robot moves on the ground. Four typical tripod period gaits of a radial symmetrical six-legged robot are analyzed. Similar to the metamorphic mechanism, the locomotion of multi-legged robot is considered as a series of varying hybrid serial-parallel mechanisms by assuming the constraints of the feet on the ground with hinges. One gait cycle is divided into several periods, and in different walking period there is a specific equivalent mechanism corresponding to it, and the walking process of multi-legged robot is composed by these series of equivalent mechanisms. Walking performance can be got by analyzing these series of equivalent mechanisms. Kinematics model of the equivalent mechanism is established, workspaces of equivalent mechanisms are illustrated by simulation and a concept of static stability workspace is proposed to evaluate the static stability of these four gaits. A new method to calculate the stride length of multi-legged robots is presented by analyzing the relationship between the workspace of two adjacent equivalent parallel mechanisms in one gait cycle. The stride lengths of four gaits are given by simulations. Comparison of stride length and static stability among these four typical tripod gaits are given. It has been proved that mixed gait and insect-wave gait II have better static stability than mammal kick-off gait and insect-wave gait I. Insect-wave gait II displays its advantage on stride length while the height of robot body lower than 87 mm, mammal kick-off gait has superiority on stride length while the height of robot body higher than 115 mm, and insect-wave gait I shows its shortcoming in stride length. The proposed method based on metamorphic theory and combining the footholds and body height of robot provides a new method to comprehensive analyze the performance of multi-legged robot.

Method for Six-Legged Robot Stepping on Obstacles by Indirect Force Estimation

Adaptive gaits for legged robots often requires force sensors installed on foot-tips,however impact,temperature or humidity can affect or even damage those sensors.Efforts have been made to realize indirect force estimation on the legged robots using leg structures based on planar mechanisms.Robot Octopus III is a six-legged robot using spatial parallel mechanism（UP-2UPS） legs.This paper proposed a novel method to realize indirect force estimation on walking robot based on a spatial parallel mechanism.The direct kinematics model and the inverse kinematics model are established.The force Jacobian matrix is derived based on the kinematics model.Thus,the indirect force estimation model is established.Then,the relation between the output torques of the three motors installed on one leg to the external force exerted on the foot tip is described.Furthermore,an adaptive tripod static gait is designed.The robot alters its leg trajectory to step on obstacles by using the proposed adaptive gait.Both the indirect force estimation model and the adaptive gait are implemented and optimized in a real time control system.An experiment is carried out to validate the indirect force estimation model.The adaptive gait is tested in another experiment.Experiment results show that the robot can successfully step on a 0.2 m-high obstacle.This paper proposes a novel method to overcome obstacles for the six-legged robot using spatial parallel mechanism legs and to avoid installing the electric force sensors in harsh environment of the robot＇s foot tips.

Novel method of gait switching in six-legged robot walking on continuous-nondifferentiable terrain by utilizing stability and interference criteria

Continuous-nondifferentiable terrains are extremely challenging for the environment adaption of six-legged robots. Previous researches have focused on gait planning methods to improve inherent ability of legged robots to walk over moderate terrains.However,most six-legged robots utilize relatively monotonic gait so that they still cannot well adapt tough terrains. As a result,the current legged robots easily get stuck and fall when encountering continuous-nondifferentiable terrains,such as stairs.Therefore,a method of gait switching is proposed so that six-legged robots can flexibly generate multiple gaits to adapt complex terrains. This study investigated the relationship between six-legged robot gait topologies and physical constraints,such as robot stability and robot-terrain interference. The proposed gait switcher can generate 0-6,1-5,2-4 and 3-3 gaits,which is instructed by the stability and interference criteria. Simulations and experiments were performed on a novel six-legged robot Hexa-XIII that succeeded climbing stairs over 45°. The effectiveness of the gait switching method is validated by the experiment results.

Learning to Identify Footholds from Geometric Characteristics for a Six-legged Robot over Rugged Terrain

Foothold identification is a key ability for legged robots that allows generating terrain adaptive behaviors(e.g.,gait and control parameters)and thereby improving mobility in complex environment.To this end,this paper addresses the issue of foothold characterization and identification over rugged terrain,from the terrain geometry point of view.For a terrain region that might be a potential foothold of a robotic leg,the characteristic features are extracted as two first-order partial derivatives and two curvature parameters of a quadric regression surface at this location.These features are able to give an intuitive and,more importantly,accurate characterization towards the specific geometry of the ground location.On this basis,a supervised learning technique,Support Vector Machine(SVM),is employed,seeking to Ieam a foothold identification policy from human expert demonstration.As a result,an SVM classifier is leamt using the extracted features and human-demonstrated labels,which is able to identify whether or not a certain ground location is suited as a safe foot support for a robotic leg.It is shown that over 90%identification rate can be achieved with the proposed approach.Finally,preliminary experiment is implemented with a six-legged robot to demonstrate the effectiveness of the proposed approach.

基于RobotStudio的视觉分拣打磨工作站仿真设计

为解决中小型零件混流自动化生产等问题,提出基于RobotStudio的工业机器人视觉分拣打磨工作站的仿真设计方案。根据零件的生产工艺流程,利用UG软件创建视觉分拣打磨工作站的整体布局;通过分析工作站各个模块功能,设计了各模块的结构;利用RobotStudio软件构建了工作站仿真模型。以视觉引导Smart组件和输送链跟踪仿真为例,阐述了ABB工业机器人通过视觉引导获取工件空间位姿的四元数和欧拉角的转换方法,并介绍了视觉拍照、机器人与工业相机通信等动态仿真的设置过程,以及输送链跟踪动态效果的设置方法。为实现工作站全过程仿真,设计了整体工作站逻辑,编制了仿真工作站离线程序,并将仿真工作站同步到实验平台调试验证。该设计可为智能制造生产线的设计、制造及应用提供参考。

The evolution of robotics:research and application progress of dental implant robotic systems

The use of robots to augment human capabilities and assist in work has long been an aspiration.Robotics has been developing since the 1960s when the first industrial robot was introduced.As technology has advanced,robotic-assisted surgery has shown numerous advantages,including more precision,efficiency,minimal invasiveness,and safety than is possible with conventional techniques,which are research hotspots and cutting-edge trends.This article reviewed the history of medical robot development and seminal research papers about current research progress.Taking the autonomous dental implant robotic system as an example,the advantages and prospects of medical robotic systems would be discussed which would provide a reference for future research.

Improving Kinematic Flexibility and Walking Performance of a Six-legged Robot by Rationally Designing Leg Morphology

This paper explores the design of leg morphology in a six-legged robot.Inspired by nature,where animals have different leg morphology,we examined how the difference in leg morphology influences behaviors of the robot.To this end,a systematic search was conducted by scanning over the parameter space consisting of default angles of leg joints of the six-legged robot,with two main objectives:to maximize the kinematic flexibility and walking performance of the robot.Results show that(1)to have a high kinematic flexibility with both the torso and swing legs,the femur segment should tilt downwards by 5°-10°and the tibia segment should be vertically downwards or with a slight inward tilt;(2)to achieve relatively energy-efficient and steady walking,the tibia segment should be approximately vertically downwards,with the femur segment tilting upwards to lower the torso height.The results of this study suggest that behaviors of legged robots can be passively enhanced by careful mechanical design choices,thereby leading to more competent legged machines.

基于Robotstudio的工业机器人课程教学设计与实践

阐述工业机器人实训课程教学实践,将Robotstudio软件融入课程教学中,探讨以实例项目驱动的教学内容设计,以虚实结合手段提升课堂教学效果的教学模式,从而实现教学与实践的统一。

Step rolling planning of a six-legged robot with 1-DOF waist for slope climbing

Walking on inclined terrains or slopes is challenging for multi-legged robots. Robots should be able to handle more strict constraints imposed by the physical system than they do on flat terrains, such as smaller leg workspace and tighter stability margin. At the same time, robots need to autonomously generate constrained and stable motions to accommodate terrain inclination and unevenness. With regard to these issues, this paper provides a solution from two perspectives, mechanism design and planning methodology. The robot mechanism with a 1-DOF waist is firstly proposed to meet the requirements of the leg workspace and the static stability. After that, a step rolling planning scheme is introduced, in which the robot schedules its body planar 2D motion according to the human guidance and plans its elevation, roll, pitch as well as leg motions autonomously incorporating sensory feedbacks. The step rolling planning scheme ensures smooth and safe motion transitions from step to step.At last, simulations and experiments are carried out, demonstrating the effectiveness of our mechanical design and the proposed planning method.

Human-Tracking Strategies for a Six-legged Rescue Robot Based on Distance and View

Human tracking is an important issue for intelligent robotic control and can be used in many scenarios, such as robotic services and human-robot cooperation. Most of current human-tracking methods are targeted for mobile/tracked robots, but few of them can be used for legged robots. Two novel human-tracking strategies, view priority strategy and distance priority strategy, are proposed specially for legged robots, which enable them to track humans in various complex terrains. View priority strategy focuses on keeping humans in its view angle arrange with priority, while its counterpart, distance priority strategy, focuses on keeping human at a reasonable distance with priority. To evaluate these strategies, two indexes（average and minimum tracking capability） are defined. With the help of these indexes, the view priority strategy shows advantages compared with distance priority strategy. The optimization is done in terms of these indexes, which let the robot has maximum tracking capability. The simulation results show that the robot can track humans with different curves like square, circular, sine and screw paths. Two novel control strategies are proposed which specially concerning legged robot characteristics to solve human tracking problems more efficiently in rescue circumstances.

Treatment of hemolymphangioma by robotic surgery: A case report

BACKGROUND Hemolymphangioma of the jejunum is rare and lacks clinical specificity,and can manifest as gastrointestinal bleeding,abdominal pain,and intestinal obstruction.Computed tomography,magnetic resonance imaging,and other examinations show certain characteristics of the disease,but lack accuracy.Although capsule endoscopy and enteroscopy make up for this deficiency,the diagnosis also still re-quires pathology.CASE SUMMARY A male patient was admitted to the hospital due to abdominal distension and abdominal pain,but a specific diagnosis by computed tomography examination was not obtained.Partial resection of the small intestine was performed by robotic surgery,and postoperative pathological biopsy confirmed the diagnosis of hemo-lymphangioma.No recurrence in the follow-up examination was observed.CONCLUSION Robotic surgery is an effective way to treat hemolymphangioma through minima-lly invasive techniques under the concept of rapid rehabilitation.

Summarizing the evidence for robotic-assisted bladder neck reconstruction: Systematic review of patency and incontinence outcomes

Objective:Bladder neck contracture and vesicourethral anastomotic stenosis are difficult to manage endoscopically,and open repair is associated with high rates of incontinence.In recent years,there have been increasing reports of robotic-assisted bladder neck reconstruction in the literature.However,existing studies are small,heterogeneous case series.The objective of this study was to perform a systematic review of robotic-assisted bladder neck reconstruction to better evaluate patency and incontinence outcomes.Methods:We performed a systematic review of PubMed from first available date to May 2023 for all studies evaluating robotic-assisted reconstructive surgery of the bladder neck in adult men.Articles in non-English,author replies,editorials,pediatric-based studies,and reviews were excluded.Outcomes of interest were patency and incontinence rates,which were pooled when appropriate.Results:After identifying 158 articles on initial search,we included only ten studies that fit all aforementioned criteria for robotic-assisted bladder neck reconstruction.All were case series published from March 2018 to March 2022 ranging from six to 32 men,with the median follow-up of 5e23 months.A total of 119 patients were included in our analysis.A variety of etiologies and surgical techniques were described.Patency rates ranged from 50%to 100%,and pooled patency was 80%(95/119).De novo incontinence rates ranged from 0%to 33%,and pooled incontinence was 17%(8/47).Our findings were limited by small sample sizes,relatively short follow-ups,and heterogeneity between studies.

Adaptive Trajectory Tracking Control for Nonholonomic Wheeled Mobile Robots:A Barrier Function Sliding Mode Approach

The trajectory tracking control performance of nonholonomic wheeled mobile robots(NWMRs)is subject to nonholonomic constraints,system uncertainties,and external disturbances.This paper proposes a barrier function-based adaptive sliding mode control(BFASMC)method to provide high-precision,fast-response performance and robustness for NWMRs.Compared with the conventional adaptive sliding mode control,the proposed control strategy can guarantee that the sliding mode variables converge to a predefined neighborhood of origin with a predefined reaching time independent of the prior knowledge of the uncertainties and disturbances bounds.Another advantage of the proposed algorithm is that the control gains can be adaptively adjusted to follow the disturbances amplitudes thanks to the barrier function.The benefit is that the overestimation of control gain can be eliminated,resulting in chattering reduction.Moreover,a modified barrier function-like control gain is employed to prevent the input saturation problem due to the physical limit of the actuator.The stability analysis and comparative experiments demonstrate that the proposed BFASMC can ensure the prespecified convergence performance of the NWMR system output variables and strong robustness against uncertainties/disturbances.

基于Robot Studio的分类码垛仿真设计

针对工业机器人轨迹规划和自动化生产协调难度大的问题,提出一种基于Robot Studio的分类码垛仿真设计方案。使用Robot Studio软件,创建工业机器人仿真工作站。通过Smart组件的设计、I/O信号的设定、工作站逻辑的建立和程序编写等工作,最终实现工业机器人智能分类码垛操作。经过模拟仿真,结果表明:分类码垛的速度和准确率均可达到预期要求。说明该分类码垛设计方案可行,可以为实际码垛工作站的搭建和生产提供一定的现实指导。

Robotic surgery in living liver donors and liver recipients

There have been nearly 60 years since Thomas Starzl’s first liver transplant.During this period,advancements in medical technology have progressively enabled the adoption of new methods for transplantation.Among these innovations,robotic surgery has emerged in recent decades and is gradually being integrated into transplant medicine.Robotic hepatectomy and liver implantation represent significant advancements in the field of transplant surgery.The precision and minimally invasive nature of robotic surgery offer substantial benefits for both living donors and recipients.In living donors,robotic hepatectomy reduces postoperative pain,minimizes scarring,and accelerates recovery.For liver recipients,robotic liver implantation enhances surgical accuracy,leading to better graft positioning and vascular anastomosis.Robotic systems provide more precise and maneuverable control of instruments,allowing surgeons to perform complex procedures with greater accuracy and reduced risk to patients.This review encompasses publications on minimally invasive donor liver surgery,with a specific focus on robotic liver resection in transplantation,and aims to summarize current knowledge and the development status of robotic surgery in liver transplantation,focusing on liver resection in donors and graft implantation in recipients.

Managerial perspectives of scaling up robotic-assisted surgery in healthcare systems:A systematic literature review

Objectives Robotic-assisted surgery(RAS)is a minimally invasive technique practiced in multiple specialties.Standard training is essential for the acquisition of RAS skills.The cost of RAS is considered to be high,which makes it a burden for institutes and unaffordable for patients.This systematic literature review(SLR)focused on the various RAS training methods applied in different surgical specialties,as well as the cost elements of RAS,and was to summarize the opportunities and challenges associated with scaling up RAS.Methods An SLR was carried out based on the Preferred Reporting Items for Systematic reviews and Meta-Analyses reporting guidelines.The PubMed,EBSCO,and Scopus databases were searched for reports from January 2018 through January 2024.Full-text reviews and research articles in the English language from Asia-Pacific countries were included.Articles that outlined training and costs associated with RAS were chosen.Results The most common training system is the da Vinci system.The simulation technique,which includes dry-lab,wet-lab,and virtual reality training,was found to be a common and important practice.The cost of RAS encompasses the installation and maintenance costs of the robotic system,the operation theatre rent,personnel cost,surgical instrument and material cost,and other miscellaneous charges.The synthesis of SLR revealed the challenges and opportunities regarding RAS training and cost.Conclusions The results of this SLR will help stakeholders such as decision-makers,influencers,and end users of RAS to understand the significance of training and cost in scaling up RAS from a managerial perspective.For any healthcare innovation to reach a vast population,cost-effectiveness and standard training are crucial.