Investigation on Skidding of Rolling Element Bearing in Loaded Zone

Skidding which occurs when rolling element entering into the loaded zone is prone to cause wear and incipient failure to the raceways and rolling elements. This paper presents a dynamic model to investigate the skidding of a rolling element bearing under radial load when the rolling element is entering into the load zone. In this dynamic model, the effects of the contact forces, friction forces on the rolling element-race and rolling element-cage interfaces, gravity, and the centrifugal forces of rolling elements are taken into consideration. The Hertzian contact theory is applied to calculate the non-linear contact forces. The Coulomb friction law is used to calculate the friction forces. The differential equations of rotational motion of the rolling element with regard to its central axis and the central axis of the outer ring are established respectively. The dynamic equations are then solved by using a fourth-order Runge-Kutta algorithm. The skidding characteristics of rolling element at the entry into the loaded zone are exposed, and the effects of the operating parameters on skidding behavior are carefully investigated.

ASSESSMENT OF ANIMAL SKIDDING AND GROUND MACHINE SKIDDING UNDER MOUNTAIN CONDITIONS

The Proportion of animal skidding in forest operations in Heilongjiang forest region increased signiticantly in recent years. This paper at first demonstrated and analyzed the development of the animal skidding and machine skidding, then, evaluated these two means of ground.skidding currently runing in this region both individually and comprehensively under the following criteria: operation efficiency or operation cost, degree of damage to soil and residual stands, accident rate, and natural regeneration. Finally, according to the results of synthetic assessments, cIassitications of operation conditions suitable to each of skidding measures were recommended quqntitatively with considerations of multiple evaluation criteria.

Time consumption,productivity,and cost analysis of skidding in the Hyrcanian forest in Iran

The performance of the skidder Timber jack 450 C was presented in timber skidding of non-coniferous trees in hilly and mountainous conditions. An empirical time study was conducted to evaluate the current skidding system in Hyrcanian forest in northern Irma for improving production rate of skidding and finding out the production cost for planning. Based on the identified elements of skidding work phase and 130 recorded cycles, we calculated the models for effective time consumption, total productivity, and unit cost. The validity of the model was tested at 95% confidence interval. The average load volume per cycle was 2.82 m3, average one way skidding distance was 450 m, and the average slope was 18%. The average travel speed of unloaded skidder was 5.8 km.h-1, and the average speed of loaded skidder was 0.1 km.h＂~ higher than the speed of the unloaded ones. The travel speed was pre- dominantly affected by longitudinal slopes and types of strip roads. The average speed of pulling the cable was 1.16 km.h-1, and that of load winching was 0.74 km.hl. The average outputs in skidding was 10.6 m^-3.h^-1 and the unit cost was 12.1 USS per hour. The time consumption and productivity of skidding depends on distances and slope, number of logs per cycle, volume, log length, etc. However, the influence of variables is not the same.

Design of Small Stone Asphalt Mixture based on Anti-skidding Performance

Small stone asphalt mixture（SSAM） was designed by Bailey method and coarse aggregate voids-filling method.The optimum asphalt content was determined by Marshal test.Surface texture depth for SSAM with different voidage,and the BPN of SSAM and SMA before after wet track abrasion were measured.The experimental results indicate that the surface texture depth increases with the decreasing of asphalt aggregate ratio.The SSAM with the optimal asphalt content has a good skid resistance.BPN of asphalt mixture decreases with the increasing of wearing time,but the extent of reduction is different.The reduction rate of BPN for SSAM is smaller than that of SMA,indicating that SSAM has a good skid resistance attenuation capacity.Finally,the other properties of SSAM are also evaluated,showing that the splitting strength and modulus and SSAM are higher than those of SMA,and the other properties of SSAM,such as high-temperature performance and water stability can also satisfy the technical requirements.

Residual tree damage along skidding trails in beech stands in Greece

We studied the damage caused to unfelled trees during skidding operations in four beech stands of northern and central Greece that were managed under differing harvesting systems.After timber was harvested we recorded and analyzed all damage to a width of 2 m along both sides of the skid trails.The percentage of damaged residual trees was 17–28 %.Higher numbers of saplings were uprooted or destroyed in parts of the stands with high natural regeneration.Most damaged trees suffered 1.33–1.90 wounds that were inflicted up to a height of 1 m above ground level.At all sites mean wound sizes were large,89–1190 cm2,and caused elevated risk of future fungal infection.The damage caused by skidding during timber harvesting can be minimized by better planning the harvest operations,and training forest workers in reduced impact logging.

Comparison of Skidding Performance of Small Track-type Experimental Prototype Skidder and J-50 Skidding Tractor

In this paper, field experimental comparison is made between a small track-type experimental prototype skidder and a J-50 skidding tractor. Experimental data, including skidding productivity, soil compaction on skidding trails, and damage rate of the residual trees, are analyzed. The results indicate that with the condition of scattered skidding area and low skidding volume per cycle, small track-type experimental prototype skidder has advantage on working and a higher skidding productivity. It makes lower soil compaction to the skidding trails in the depth of 0-5 cm, 5-10 cm, and 10-15 cm. Under the same work conditions, the damage rate of the residual trees made by small track-type experimental prototype skidder is only 1/5 of those made by J-50 type skidding tractor. The damage rate is reduced by 80%.

Influence of Skidding Operation on Forest Soil Respiration for Small Four-wheeled Tractors

The TJSD-750-Ⅱ type compactness measurement instrument and Li-8100 soil carbon flux automatic measurement system are used to measure soil compactness and soil respiration rate at different skidding roads. A regression model is established to analyze the correlation between soil respiration and its influencing factors. The results shows that the soil compaction on the main skidding road and sub skidding roads are larger than the control points, and the soil compaction on the main skidding road is larger than that on sub skidding roads. The higher the soil compactness is, the lower the rate of soil respiration is. This also leads to the lower sensitivity of soil respiration rate influenced by temperature and humidity.

Ecological Consequences of Mechanization of the Wood Skidding Works in Greece

The movement of the wood skidding means on the natural ground causes damages in the soil and in the remaining stand, the size of which depends on the kind, the resistance and the soil conditions, from the size and movements frequency on the machines as well as from the length of the skidding wood. This study was carried out in a productive forest of Greece, the resistance of the soil in connection with the moisture and the category of the native stone, the pressure that tires of tractors exert in the soil, are estimated. It also estimated the percentage of the trees in the remaining stand which suffer damages from the movement of various means. The above means are used for the skidding of wood of different lengths. According to the results of the research some measures are suggested so as to decrease the damages, which are caused in the soil and in the remaining stand.

Evaluation of Environmental Impacts in the Wood Skidding with Tractors in Greece

The contemporary demands of the forestry exploitation for quantitative and qualitative increase of timber production are directly related with the mechanization of the wood skidding works. In Greece, the suitable machinery for wood skidding are those with low amortization, operation and installation expenses, are flexible, and may also be used for other farming works （since they are not used very often for wood skidding） and cause the smaller damages to the wood, the forest, the soil and the environment in general. In this paper, it studies the environmental impacts in the remaining stand as much as during the pre-skidding as well as during the main wood skidding with tractor in the forest of Arnaia, Prefecture of Halkidiki, in order to draw out useful conclusions for the improvement of the machinery application methods and the protection of the environment.

The mechanisms,evaluation and estimation of anti-skid performance of snowy and icy pavement:A review

The anti-skid performance of snowy and icy pavements is a popular research topic among road workers.Snow and ice are pollutants on a road surface.They significantly reduce the skid resistance of pavements,and thus,cause traffic accidents.Pertinent research progress on the skid resistance of snowy and icy pavements was reviewed and summarized in this work.The formation and classification of snowy and icy pavements were described on the basis of the state of snow and ice.The friction mechanisms between tires and snowy and icy pavements were revealed.Measurement methods and their applicability to the skid resistance of snowy and icy pavements were summarized.Factors that affect the skid resistance of pavements were discussed from the perspectives of pavement,environment,and vehicle.In addition,models of snowy and icy pavement resistance were classified into experience,mechanical,and numerical models.The advantages and disadvantages of these models were then compared and analyzed.Some suggestions regarding snowy and icy pavements were presented in accordance with the aforementioned information,including the development of efficient testing tools,the quantification of skid resistance under the coupling effects of multiple factors,the establishment of unified evaluation standards,and the development of more effective skid resistance models.

Application of gray-tone difference matrix-based features of pavement macrotexture in skid resistance evaluation

This paper presents a method to characterize asphalt pavement macrotexture using the gray-tone difference matrix （GTDM）and discusses the potentials of the GTDM indicators for skid resistance evaluation.There are 37 field sites included in the data collection,which cover 6 types of asphalt pavement surfaces. The mean profile depth derived from 3-D macrotexture measurements （MPD3 ） has a significant relationship with the mean texture depth （MTD ）,which can be described by a logarithm model with R2 of 0.962.There is no significant linear relationship between the friction coefficient at a speed of 60 km/h （DFT60 ）and macrotexture indicators.A nonlinear model with British pendulum number （BPN ） incorporated can relate DFT60 to MTD or indicator fcon .A comparison with MTD shows that GTDM-based fcon has a potential to be a macrotexture indicator for skid resistance evaluation,which describes the general height difference and the average local height difference of pavement macrotexture. A relatively high fcon is helpful for improving asphalt pavement skid resistance.

Evaluation of surface textures and skid resistance of pervious concrete pavement

Surface textures had long been recognized as primary factors to provide the skid resistance on pavements; however, no measurement of skid resistance on pervious concrete pavement with various surface texture parameters had been made. Fractal geometry was introduced in the present work to accurately simulate transect contour curves of pervious concrete specimens through fractal interpolation. It is proved that its fractal dimension (D) can be adopted to measure the skid resistance on pervious concrete pavement, overcoming the shortcomings of both macrotexture depth (DT ) and British portable pendulum number (NBP). Combined with Fujikawa-Koike tire/road contact model, the optimization method of all surface textures was recommended for designing and constructing excellently skid-resistant and noise-absorptive pervious concrete pavement. In addition, evaluating of the abrasion process and attenuation of the surface textures on concrete pavement slabs was also the focus of this work based on accelerated abrasion test. Results show that the surface textures on pervious concrete pavement slabs is extremely durable, compared to those on conventional grooved or exposed aggregate concrete pavement slabs.

An Adaptable Walking-skid for Seabed ROV under Strong Current Disturbance

This paper proposed a new concept of an adaptable multi-legged skid design for retro-fitting to a remotely-operated vehicle （ROV） during high tidal current underwater pipeline inspection. The sole reliance on propeller-driven propulsion for ROV is replaced with a proposed low cost biomimetic solution in the form of an attachable hexapod walking skid. The advantage of this adaptable walking skid is the high stability in positioning and endurances to strong current on the seabed environment. The computer simulation flow studies using Solidworks Flow Simulation shown that the skid attachment in different compensation postures caused at least four times increase in overall drag, and negative lift forces on the seabed ROV to achieve a better maneuvering and station keeping under the high current condition （from 0.5 m/s to 5.0 m/s）. A graphical user interface is designed to interact with the user during robot-in-the-loop testing and kinematics simulation in the pool.

Influence of rainfall on skid resistance performance and driving safety conditions of asphalt pavements

To study the influence of rainfall on pavement skid-resistance performance and driving safety,the water film thickness(WFT)concept considering the longitudinal and transverse slopes of the pavement was utilized based on the total discharge formulation and turbulence theory of slope flow.Using experimental data measured using the British pendulum test under varying WFT levels,a model for calculating the skid resistance,namely the British pendulum number(BPN),was formulated and used to quantitatively evaluate the effects of rainfall intensity,transverse,and longitudinal slopes on the computed BPN.The study results reveal that skid resistance is linearly proportional to the pavement transverse slope and inversely proportional to the rainfall intensity and the pavement longitudinal slope.In particular,rainfall intensity,along with pavement texture depth,exhibited a significant impact on the tire-pavement friction and skid-resistance performance.The results further indicate that driving safety under wet weather is predominantly governed by skid resistance and visibility.The BPN and sideway force coefficient(SFC60)values for new asphalt pavements under different rainfall intensities are provided along with some modification to the stopping sight distance(SSD)criteria.Safe driving speed limits are also determined using a safe-driving model to develop the appropriate speed limit strategies.The overall study results provide some insights,methodology approach,and reference data for the evaluation of pavement skid-resistance performance and driving safety conditions under different pavement slopes and rainfall intensities.

Soil physical properties degrade further on skid trails in the year following operations

Short-term recovery of soil physical properties on skid trails was investigated upon cessation of skidding operations and 1 year later. Bulk density and porosity were assessed at three levels of traffic intensity and two slope gradients. Compared to undisturbed areas, bulk density increased, total porosity and macroporosity decreased, and microporosity increased in the compacted areas immediately after skidding. In all cases, changes were significantly greater when traffic intensity was higher and when slopes were steeper. Surface soil compaction did not show any recovery over the 1-year period, illustrating the persistent effects of compaction on soil structure. In fact, surficial compaction further increased and macroporosity further decreased after 1 year of recovery, compared to immediately after skidding. While these changes may reflect inherent small-scale site variability or differences in soil moisture content at times of sampling, direct negative physical impacts on newly exposed soil（such as by raindrops）, in addition to the loss of organic matter after canopy removal and skidding, likely delayed any physical recovery, particularly on heavily trafficked trails on steeper slopes. These results raise serious concerns about longterm resilience to traffic on forest soils and indicate the necessity to properly retire skid trails to avoid further soil degradation as trails age.

Soil disturbances due to machinery traffic on steep skid trail in the north mountainous forest of Iran

A study was conducted to investigate the effects of skid trail slope and traffic levels on soil disturbances at two soil depths （0--10 and 10-20 cm）. The treatments were set at four traffic levels （2, 7, 12 and 20） two slope classes （〈20% and 〉20%） and two soil depths （0-10 and 10-20 cm）. Results show that skidder traffic, longitudinal slope and soil depth have significant effect on soil bulk density in skid trail. Compari- son of average soil bulk density in different traffic levels shows that there are significant differences in average bulk density between different traffic levels and control （p〈0.05）. The average bulk densities in different slopes and soil depths are significantly increased with increase in traffic levels, maximized at 12 passes （p〈0.05）, but there are no significant differences between 12 and 20 passes. The interaction effects between traffic and soil depth are significant （F005,3=0.109, p〈0.001）. For all traffic treatments, there are significant differences in soil moisture con- tent between the two slope classes and the two depths （p〈0.001）. However, the interaction effects between traffic levels and slope classes are not significant （p 〉0.05）, although skidder traffic and slope affected soil moisture content.

Influence of Thin Water Film on Skid Resistance

Most of past researches on the skid resistance/road wetness relationship deal with thick water depths （〉 1 mm）. Questions remain as to the variation of skid resistance with thin water films and the transition between the dry state and the so-called ＂damp＂ or ＂humid＂ state at which the skid resistance drop can be as high as 30%-40%. This paper deals with a theoretical and experimental assessment of the friction-water depth relationship. The main objective is to estimate local water depths trapped between the tire and the road asperities and to define a so-called ＂critical＂ water depth which can be used to detect risky situations for road users. Tests are performed in laboratory. It was found that the friction-water depth curves have an inverse-S shape and present an initial constant-friction part before decreasing to a minimum value. A ＂critical＂ water depth, defined as the water depth above which the friction coefficient collapses significantly, is determined from surface texture on critical water depth is discussed. observed friction-water depth curves. Influence of test speed and

Pavement Friction and Skid Resistance Measurement Methods: A Literature Review

Driving safety is of significance in the automobile industry and transportation systems. Pavement skid resistance has long been recognized as the most important parameter in reducing traffic accidents especially in wet conditions. The knowledge of the friction coefficient and skid resistance is very valuable information for safety enhancement of roads. Thus, it is important to find proper methods for measuring skid resistance and frictional properties of the pavement surface. There is a wide range of measurement methods and devices for measuring skid resistance. This paper presents a review on the research studies that have been done on characterization of the frictional properties of the pavement surface and discussed methods used for measurement and evaluation of texture characteristics and the strengths and weaknesses of these methods. Finally, some ideas have been suggested to develop new methods for better and proper measurement of skid resistance.

A state-of-the-art review of asphalt pavement surface texture and its measurement techniques

To understand the research status of asphalt pavement texture,the related achievements and progress of pavement surface texture were systematically sorted out from three aspects:the characterization of pavement surface texture,the texture measurement and evaluation,and the relationship between texture and the skid resistance.Based on the statistical geometric characteristics,the spectral characteristics,the fractal characteristics and the multifractal characteristics,the characteristics of pavement texture were discussed.The test methods of pavement texture were divided into two categories:direct measurement methods and indirect measurement methods.The advantages and disadvantages of each measurement method were summarized.The effects of macro-texture and micro-texture on asphalt pavement were discussed,respectively.The relationship between texture and skid resistance was studied.This review shows that multifractal theory should be further studied from the aspect of road engineering.High-precision non-contact integrated detection technology should be further studied to meet the needs of complex testing environments.The method of finite element numerical simulation has potential for the analysis of pavement skid resistance.In addition,methods such as big data analysis,neural network,and deep learning should be studied to achieve the intelligent perception and management of the whole state of skid resistance prediction.

ROV加装SKID后对其作业的影响评估

水下工具模块(SKID)通常使用与水下机器人(ROV)相匹配的连接机构安装于ROV框架底部,用于拓展ROV搭载能力、实现特定功能、存储较大容量的注入剂等,相对于普通ROV外接工具,SKID的整体设计是以ROV的主要参数为依据的,当其安装到ROV上时,能适应ROV收放载荷及水下作业载荷,因此不需要频繁拆卸和安装。因此在深水作业中,除实现自身功能外,SIKD还可以搭载多种ROV外接工具执行作业。然而在加装SIKD之后由于ROV的尺寸、重力、负载等参数发生变化,ROV在作业过程中也有一定的影响。