Effect of temperature gradientinduced periodic deformation of CRTS Ⅲ slab track on dynamic responses of the train-track system

Purpose-Temperature is an important load for a ballastless track.However,little research has been conducted on the dynamic responses when a train travels on a ballastless track under the temperature gradient.The dynamic responses under different temperature gradients of the slab are theoretically investigated in this work.Design/methodology/approach-Considering the moving train,the temperature gradient of the slab,and the gravity of the slab track,a dynamic model for a high-speed train that runs along the CRTS Ⅲ slab track on subgrade is developed by a nonlinear coupled way in Abaqus.Findings-The results are as follows:(1)The upward transmission of the periodic deformation of the slab causes periodic track irregularity.(2)Because of the geometric constraint of limiting structures,the maximum bending stresses of the slab occur near the end of the slab under positive temperature gradients,but in the middle of the slab under negative temperature gradients.(3)The periodic deformation of the slab can induce periodic changes in the interlayer stiffness and contact status,leading to a large vibration of the slab.Because of the vibration-reduction capacity of the fastener and the larger mass of the concrete base,the accelerations of both the slab and concrete base are far less than the acceleration of the rail.Originality/value-This study reveals the influence mechanism of temperature gradient-induced periodic deformation in the dynamic responses of the train-track system,and it also provides a guide for the safe service of CRTS Ⅲ slab track.

The clutch size,incubation behavior of Reeves’s Pheasant(Syrmaticus reevesii) and their responses to ambient temperature and precipitation

Weather conditions play a pivotal role in embryo development and parental incubation costs,potentially impacting the clutch size and incubation behavior of birds.Understanding these effects is crucial for bird conservation.Reeves’ s Pheasant(Syrmaticus reevesii) is a threatened species endemic to China,which is characterized by female-only incubation.However,there is a lack of information regarding the impact of weather conditions on clutch size and incubation behavior in this species.Using satellite tracking,we tracked 27 wild female Reeves’ s Pheasants from 2020 to 2023 in Hubei Province,China.We explored their clutch size and incubation behavior,as well as their responses to ambient temperature and precipitation.Clutch size averaged 7.75 ±1.36,had an association with average ambient temperature and average daily precipitation during the egglaying period,and was potentially linked to female breeding attempts.Throughout the incubation period,females took an average of 0.73 ±0.46 recesses every 24 h,with an average recess duration of 100.80 ±73.37 min and an average nest attendance of 92.98 ±5.27%.They showed a unimodal recess pattern in which nest departures peaked primarily between 13:00 and 16:00.Furthermore,females rarely left nests when daily precipitation was high.Recess duration and nest attendance were influenced by the interaction between daily mean ambient temperature and daily precipitation,as well as day of incubation.Additionally,there was a positive correlation between clutch size and recess duration.These results contribute valuable insights into the lifehistory features of this endangered species.

Temperature distribution and dynamic control of secondary cooling in slab continuous casting

To predict and optimize the temperature distribution of slab continuous casting in steady operational state, a three-dimensional model （named ＂offline model＂） based on the heat transfer and solidification theories was developed. Both heat transfer and flux distribution characteristics of the nozzle sprays on the slab were considered, and the complicated boundary conditions, such as spray cooling, natural convection, thermal radiation as well as contact cooling of individual rolls were involved in the model. By using the calibrated caster dependent model factors, the calculated temperature and shell thickness accorded well with the measured. Furthermore, a dynamic secondary water cooling control system was also developed on the basis of a two-dimensional transient heat transfer model （named ＂online model＂） and incremental PID control algorithm to reduce slab surface temperature fluctuation in unsteady state. Compared with the traditional spray table control method, the present online model and dynamic PID control demonstrate a higher capability and flexibility to adjust cooling water flowrate and reduce slab surface temperature fluctuation when the casting speed is changed.

Experimental study of temperature gradient in track slab under outdoor conditions in Chengdu area

Temperature is one of the important loads for designing slab track. The characteristic of slab track tem- perature varies greatly with different regional climates. In this work, a bi-block slab track model was built under outdoor conditions in Chengdu area; the statistical characteristic of temperature gradient in track slab and the relationship between temperature gradient and surface air temperature were tested and analyzed. The results show that the track slab temperature gradient will vary periodically according to the surface air temperature, and show a clear nonlinearity along the height direction. The temperature gradient distribution is extremely uneven： the temperature gradient in the top part of the track slab is larger than that in the bottom part; the most frequently occurring temperature gradient of the track slab is around -3.5 ℃/m and more than 75 % locates in the level -10 to 10 ℃/m; concrete with a relatively good heat exchange condition with the surrounding air has a narrower band distribution. In addition, the frequency distribution histogram should exclude the time zone from 00：00 to 06：00 because there is almost no traffic in this period. The amplitude of track slab temperature variation is obviously lower than that of the air temperature variation, and the former is approximately linear with the latter.

An Explanation of the Temperature-Dependent Upper Critical Field Data of H3S on the Basis of the Thermodynamics of a Superconductor in a Magnetic Field

Excellent fits to a couple of the data-sets on the temperature (T)-dependent upper critical field (Hc2) of H3S (critical temperature, Tc ≈ 200 K at pressure ≈ 150 GPa) reported by Mozaffari, et al. (2019) were obtained by Talantsev (2019) in an approach based on an ingenious mix of the Ginzberg-Landau (GL), the Werthamer, Helfand and Hohenberg (WHH), and the Gor’kov, etc., theories which have individually been employed for the same purpose for a long time. Up to the lowest temperature (TL) in each of these data-sets, similarly accurate fits have also been obtained by Malik and Varma (2023) in a radically different approach based on the Bethe-Salpeter equation (BSE) supplemented by the Matsubara and the Landau quantization prescriptions. For T TL, however, while the (GL, WHH, etc.)-based approach leads to Hc2(0) ≈ 100 T, the BSE-based approach leads to about twice this value even at 1 K. In this paper, a fit to one of the said data-sets is obtained for the first time via a thermodynamic approach which, up to TL, is as good as those obtained via the earlier approaches. While this is interesting per se, another significant result of this paper is that for T TL it corroborates the result of the BSE-based approach.

Flow and Temperature Fields in Slab Continuous Casting Molds

In order to develop super-board and super-thick slabs, the flow and temperatur fields were studied in slab continuous casting molds under different practical conditions, such as slab dimensions, with-drawing slab speed, design of nozzles, and superheat tempera-ture. The results showed that it is preferred to incline nozzle bores downwards and the submerged depth of the nozzles is best kept be-tween 250-300 mm. In addition, the solidified shell is thicker at the wide face than that at the narrow face, while the thin points alongthe wide face ekist both in the center and in the some area toward each respective end.

Comparative Studies on the Changes of Microtubule Distribution and Reorganization During the Meiotic Stages of Development in Normal (IR36) and a Temperature/photoperiod Sensitive Male Sterile Line (Peiai 64S) of Rice ( Oryza sativa )

Changes in the pattern of organization of microtubules in the meiotic stages of development of pollen (i.e. from pre-meiotic interphase to more or less metaphase I) of a normal (IR36) and a temperature/photoperiod sensitive male sterile line (Peiai 64S) of rice were studied using immunofluorescence confocal microscopy. In IR36, from pre-meiotic interphase to metaphase I, the pattern of microtubule distribution in the meiocytes underwent a series of changes. Some new organizational patterns of microtubules (that have not been described before) were observed during microsporogenesis, including the existence of a broad band of perinuclear microtubules at the diakinesis stage of development. The pattern of microtubule distribution in the meiocytes of the male sterile line, Peiai 64S, was quite different front that seen in IR36. In Peiai 64S, the microtubules showed abnormal patterns of distribution from pre-meiotic interphase to metaphase I. For example the broad band of perinuclear microtubules seen at diakinesis in IR36 was much disorganized and loosened in Peiai 64S. The spindles formed were also very abnormal and different from the normal spindle. The appearance of abnormal microtubule distribution in the early stages of microsporogenesis may contribute to the malformation and ultimate abortion of pollen in Peiai 64S.

Effects of Temperature and Pressure on Stress Corrosion Cracking Behavior of 310S Stainless Steel in Chloride Solution

310S is an austenitic stainless steel for high temperature applications, having strong resistance of oxidation, hydrogen embrittlement and corrosion. Stress corrosion cracking（SCC） is the main corrosion failure mode for 310S stainless steel. Past researched about SCC of 310S primarily focus on the corrosion mechanism and influence of temperature and corrosive media, but few studies concern the combined influence of temperature, pressure and chloride. on SCC of 310S stainless steel, prepared samples are investigated via For a better understanding of temperature and pressure＇s effects slow strain rate tensile test（SSRT） in different temperature and pressure in NACE A solution. The result shows that the SCC sensibility indexes of 310S stainless steel increase with the rise of temperature and reach maximum at 10MPa and 160~C, increasing by 22.3% compared with that at 10 MPa and 80 ℃. Instead, the sensibility decreases with the pressure up. Besides, the fractures begin to transform from the ductile fracture to the brittle fracture with the increase of temperature. 310S stainless steel has an obvious tendency of stress corrosion at 10MPa and 160℃ and the fracture surface exists cleavage steps, river patterns and some local secondary cracks, having obvious brittle fracture characteristics. The SCC cracks initiate from inclusions and tiny pits in the matrix and propagate into the matrix along the cross section gradually until rupture. In particular, the oxygen and chloride play an important role on the SCC of 310S stainless steel in NACE A solution. The chloride damages passivating film, causing pitting corrosion, concentrating in the cracks and accelerated SSC ultimately. The research reveals the combined influence of temperature, pressure and chloride on the SCC of 310S, which can be a guide to the application of 310S stainless steel in super-heater tube.

A Decadal Shift of Summer Surface Air Temperature over Northeast Asia around the Mid-1990s

This study identifies a decadal shift of summer surface air temperature （SAT） over Northeast Asia,including southeastern parts of Russia,Mongolia and northern China,around the mid-1990s.The results suggest that the SAT over the Northeast Asia experienced a significant warming after 1994 relative to that before 1993.This decadal shift also extends to northern China,and leads to a warmer summer over Northeast China and North China after the mid-1990s.The decadal warming over Northeast Asia is found to concur with the enhancement of South China rainfall around the mid-1990s.On the one hand,both the Northeast Asian SAT and South China rainfall exhibit this mid-1990s decadal shift only in summer,but not in other seasons.On the other hand,both the Northeast Asian SAT and South China rainfall exhibit this mid-1990s decadal shift not only in the summer seasonal mean,but also in each month of summer （June,July and August）.Furthermore,the decadal warming is found to result from an anticyclonic anomaly over Northeast Asia,which can be interpreted as the response to the increased precipitation over South China,according to previous numerical results.Thus,we conclude that the warming shift of summer Northeast Asian SAT around the mid-1990s was a remote response to the increased precipitation over South China.

Experimental study on the effect of H2S and SO2 on high temperature corrosion of 12Cr1MoV

Aiming at the high temperature corrosion in a coal-fired boiler,the effect of H2S and SO2 on the corrosion of 12 CrlMoV under the water wall condition has been investigated by experiments.The results indicate that H2 S can promote the corrosion significantly,and the coarse porous oxide film formed cannot stop the progress of corrosion.While SO2 presents little effect on the corrosion.The main composition of the surface of 12 CrlMoV corrosion products is Fe2 O3.With H2S in the atmosphere,the corrosion gradually develops into deeper layers by forming FeS,FeO and Fe2 O3 alternately.The corrosion rate is doubled for every 50℃ inerease in temperature at 400-500℃.

Abrupt Summer Warming and Changes in Temperature Extremes over Northeast Asia Since the Mid-1990s: Drivers and Physical Processes

This study investigated the drivers and physical processes for the abrupt decadal summer surface warming and increases in hot temperature extremes that occurred over Northeast Asia in the mid-1990s. Observations indicate an abrupt increase in summer mean surface air temperature （SAT） over Northeast Asia since the mid-1990s. Accompanying this abrupt surface wanning, significant changes in some temperature extremes, characterized by increases in summer mean daily maximum temperature （Tmax）, daily minimum temperature （Train）, annual hottest day temperature （TXx）, and annual warmest night temperature （TNx） were observed. There were also increases in the frequency of summer days （SU） and tropical nights （TR）. Atmospheric general circulation model experiments forced by changes in sea surface temperature （SST）/sea ice extent （SIE）, anthropogenic greenhouse gas （GHG） concentrations, and anthropogenic aerosol （AA） forcing, relative to the period 1964- 93, reproduced the general patterns of observed summer mean SAT changes and associated changes in temperature extremes, although the abrupt decrease in precipitation since the mid-1990s was not simulated. Additional model experiments with different forcings indicated that changes in SST/SIE explained 76% of the area-averaged summer mean surface warming signal over Northeast Asia, while the direct impact of changes in GHG and AA explained the remaining 24% of the surface warming signal. Analysis of physical processes indicated that the direct impact of the changes in AA （through aerosol- radiation and aerosol-cloud interactions）, mainly related to the reduction of AA precursor emissions over Europe, played a dominant role in the increase in TXx and a similarly important role as SST/SIE changes in the increase in the frequency of SU over Northeast Asia via AA-induced coupled atmosphere-land surface and cloud feedbacks, rather than through a direct impact of AA changes on cloud condensation nuclei. The modelling results also imply that the abrupt summer surface warming and increases in hot temperature extremes over Northeast Asia since the mid-1990s will probably sustain in the next few decades as GHG concentrations continue to increase and AA precursor emissions over both North America and Europe continue to decrease.

Analytical prediction and field validation of transient temperature field in asphalt pavements

This work presented the development and validation of an analytical method to predict the transient temperature field in the asphalt pavement.The governing equation for heat transfer was based on heat conduction radiation and convection.An innovative time-dependent function was proposed to predict the pavement surface temperature with solar radiation and air temperature using dimensional analysis in order to simplify the complex heat exchange on the pavement surface.The parameters for the time-dependent pavement surface temperature function were obtained through the regression analysis of field measurement data.Assuming that the initial pavement temperature distribution was linear and the influence of the base course materials on the temperature of the upper asphalt layers was negligible,a close-form analytical solution of the temperature in asphalt layers was derived using Green's function.Finally,two numerical examples were presented to validate the model solutions with field temperature measurements.Analysis results show that the solution accuracy is in agreement with field data and the relative errors at a shallower depth are greater than those at a deeper one.Although the model is not sensitive to dramatic changes in climatic factors near the pavement surface,it is applicable for predicting pavement temperature field in cloudless days.

The Regions with the Most Significant Temperature Trends During the Last Century

Having analyzed a global grid temperature anomaly data set and some sea level pressure data during the last century, we found the following facts. Firstly, the annual temperature change with a warming trend of about 0.6°C/ 100 years in the tropical area over Indian to the western Pacific Oceans was most closely correlated to the global mean change. Therefore, the temperature change in this area might serve as an indi-cator of global mean change at annual and longer time scales. Secondly, a cooling of about -0.3°C/ 100 years occurred over the northern Atlantic. Thirdly, a two-wave pattern of temperature change, warming over northern Asia and northwestern America and cooling over the northern Atlantic and the northern Pa-cific, occurred during the last half century linked to strengthening westerlies over the northern Atlantic and the weakening Siberian High. Fourthly, a remarkable seasonal difference occurred over the Eurasian con-tinent, with cooling (warming) in winter (summer) during 1896–1945, and warming (cooling) in winter (summer) during 1946-1995. The corresponding variations of the North Atlantic Oscillation and the South-ern Oscillation were also discussed. Key words Temperature trend - Mann-Kendall’s Test - Significance - Regional difference - Correlation coefficient This study was supported by the Ministry of Science and Technology Projects G1999043400 and Na-tional Key Project- “Studies on Short-Term Climate Prediction System in China” under Grant No.96-908-01-04.

Examining the Relationship Between Spatial Configurations of Urban Impervious Surfaces and Land Surface Temperature

The urban heat island(UHI) effect has significant effects on the quality of life and public health. Numerous studies have addressed the relationship between UHI and the increase in urban impervious surface area(ISA), but few of them have considered the impact of the spatial configuration of ISA on UHI. Land surface temperature(LST) may be affected not only by urban land cover, but also by neighboring land cover. The aim of this research was to investigate the effects of the abundance and spatial association of ISAs on LST. Taking Harbin City, China as an example, the impact of ISA spatial association on LST measurements was examined. The abundance of ISAs and the LST measurements were derived from Landsat Thematic Mapper(TM) imagery of 2000 and 2010, and the spatial association patterns of ISAs were calculated using the local Moran’s I index. The impacts of ISA abundance and spatial association on LST were examined using correlation analysis. The results suggested that LST has significant positive associations with both ISA abundance and the Moran’s I index of ISAs, indicating that both the abundance and spatial clustering of ISAs contribute to elevated values of LST. It was also found that LST is positively associated with clustering of high-ISA-percentage areas(i.e.,>50%) and negatively associated with clustering of low-ISA-percentage areas(i.e.,<25%). The results suggest that, in addition to the abundance of ISAs,their spatial association has a significant effect on UHIs.

A Statistical Scheme for the Seasonal Forecasting of North China's Surface Air Temperature during Winter

This paper presents a statistical scheme for the seasonal forecasting of North China's surface air temperature (NCSAT) during winter. Firstly, a prediction model for an decrease or increase of winter NCSAT is established, whose predictors are available for no later than the previous September, as this is the most favorable month for seasonal forecasting up to two months ahead.The predicted NCSAT is then derived as the sum of the predicted increment of NCSAT and the previous NCSAT. The scheme successfully predicts the interannual and the decadal variability of NCSAT. Additionally, the advantages of the prediction scheme are discussed.

Average temperature calculation for straight single-row-piped frozen soil wall

The average temperature of frozen soil wall is an essential parameter in the process of design, construction, and safety manage- ment of artificial ground freezing engineering. It is the basis of calculating frozen soil＇s mechanical parameters, fiarther prediction of bearing capacity and, ultimately, safety evaluation of the frozen soil wall. Regarding the average temperature of sin- gle-row-piped frozen soil wall, this paper summarizes several current calculation methods and their shortcomings. Furthermore, on the basis of Bakholdin＇s analytical solution for the temperature field under straight single-row-piped freezing, two new calcula- tion models, namely, the equivalent trapezoid model and the equivalent triangle model, are proposed. These two approaches are used to calculate the average temperature of a certain cross section which indicates the condition of the whole frozen soil wall. Considering the possible parameter range according to the freezing pipe layout that might be applied in actual construction, this paper compares the average temperatures of frozen soil walls obtained by the equivalent trapezoid method and the equivalent tri- angle method with that obtained by numerical integration of Bakholdin＇s analytical solution. The results show that the discrepancies are extremely small and these two new approaches are better than currently prevailing methods. However, the equivalent triangle method boasts higher accuracy and a simpler formula compared with the equivalent trapezoid method.

Solution of pavement temperature field in“Environment-Surface”system through Green's function

In order to simplify the boundary conditions of pavement temperature field,the "Environment-Surface" system which considered the natural environment and pavement surface was established.Based on this system,the partial differential equations of the one-dimensional heat conduction in the pavement were established on the basis of the heat transfer theory.Furthermore,the function forms of the initial and boundary conditions of the equations were created through the field experiments.The general solution of the pavement one-dimensional heat conduction partial differential equations was acquired by using Green's function,and the explicit expression of pavement temperature field under specific constraint conditions was derived.For the purpose of analysis,the pavement temperatures in different seasons were calculated using the explicit expression of pavement temperature field,and the calculation accuracy was analyzed through the comparison between measured and calculated values.Then,the relationship between fitting accuracy and calculation accuracy of pavement temperatures was analyzed.The analysis results show that: the usage of "Environment-Surface" system simplifies the calculation of pavement temperature field; the relative error between calculated and measured values is generally less than 7% and is seldom influenced by seasons; there is a positive correlation between the calculation accuracy and the fitting accuracy of pavement surface temperature; high fitting accuracy would result in less error of pavement temperature prediction.

Various admixtures to mitigate the long-term strength retrogression of Portland cement cured under high pressure and high temperature conditions

In order to investigate the problem of long-term strength retrogression in oil well cement systems exposed to high pressure and high temperature(HPHT)curing conditions,various influencing factors,including cement sources,particle sizes of silica flour,and additions of silica fume,alumina,colloidal iron oxide and nano-graphene,were investigated.To simulate the environment of cementing geothermal wells and deep wells,cement slurries were directly cured at 50 MPa and 200?C.Mineral compositions(as determined by X-ray diffraction Rietveld refinement),water permeability,compressive strength and Young’s modulus were used to evaluate the qualities of the set cement.Short-term curing(2e30 d)test results indicated that the adoption of 6 m m ultrafine crystalline silica played the most important role in stabilizing the mechanical properties of oil well cement systems,while the addition of silica fume had a detrimental effect on strength stability.Long-term curing(2e180 d)test results indicated that nano-graphene could stabilize the Young’s modulus of oil well cement systems.However,none of the ad-mixtures studied here can completely prevent the strength retrogression phenomenon due to their inability to stop the conversion of amorphous to crystalline phases.

Reduced Solar Activity Disguises Global Temperature Rise

The question whether human activities seriously affect climate is asked with increasing voice these days. Quite understandable since the climate appears to be out of control with the significant global temperature increases already seen during the last three decades and with still heavier temperature increases to come in the future according to prognoses, among others, in the recent comprehensive IPCC reports [1]. However, the most recent climate data [2], show global temperature development levelling off or even turning negative since 2001 in contrast to the anticipated course related to the steady increases in the concentration in the atmosphere of green-house gasses, primarily carbon dioxide and methane [1]. The purpose of this communication is to demonstrate that the reduced rate in the global temperature rise complies with expectations related to the decaying level of solar activity according to the relation published in an earlier analysis [3]. Without the reduction in the solar activity-related contributions the global temperatures would have increased steadily from 1980 to present.

A New Method of Measurement of the True Temperature and Emissivity of Non-Black Body Using One Component of Wien’s Spectrum of Thermal Radiation

It is shown that the measurement of only one component of the Wein’s spectrum of thermal radiation in range λT ≤ 3000 (&deg;C μm) is sufficient to estimate the true temperature and spectral emissivity of the selected component with sufficient accuracy, although more than one hundred years this statement was considered as incorrect. The proposed method is based on the formation of the linear dependence of the logarithm of the emissivity of not real wavelengths and artificially generated “virtual” spectral components.