[Objective] This study aimed to investigate the characteristics of phosphorus adsorption on boiler slag and optimize the adsorption process. [Method] Boiler slag was used as an adsorbent in the single-grade adsorption...[Objective] This study aimed to investigate the characteristics of phosphorus adsorption on boiler slag and optimize the adsorption process. [Method] Boiler slag was used as an adsorbent in the single-grade adsorption process to dispose the rural domestic sewage. During the course, phosphorus adsorption kinetics and thermodynamics, adsorption operating curve and the minimum boiler slag dosage were analyzed and calculated. [Result] Langmuir adsorption isotherm could be applied to describe the absorption of phosphorus with boiler slag, and the absorption kinetics was confirmed with the pseudo second-order equation. The maximum absorption quantity and the initial absorption rate increased with the rise of temperature, reaching up to 0.159 1 mg/g and 0.169 8 mg/(g·min) respectively at 40 ℃. Thermodynamic variables ΔG0<0 and ΔH0>0 indicated that the entire process was a spontaneous endothermic reaction, and high temperature would facilitate the reaction of absorption. In the single grade adsorption, the minimum adsorbent dosage decreased as the temperature rose; at 40 ℃ the optimum mass ratio of boiler slag to wastewater was 3.31 kg/m3. [Conclusion] The adsorption process with boiler slag as adsorbent is an economical and effective approach for treating rural domestic sewage.展开更多
This study investigates a purification process for metallurgical-grade silicon(MG-Si) in which Si is alloyed with tin(Sn) and Ca O–Si O_2–Ca Cl_2 slag is used to remove boron(B) impurity. Acid leaching was performed...This study investigates a purification process for metallurgical-grade silicon(MG-Si) in which Si is alloyed with tin(Sn) and Ca O–Si O_2–Ca Cl_2 slag is used to remove boron(B) impurity. Acid leaching was performed to remove the Sn phase after slag refining to recover high-purity Si from the Si–Sn alloy. The effect of refining time was investigated, and acceptable refining results were realized within 15 min. The effects of slag composition and Sn content on the removal of B were also studied. The results indicate that increasing Sn content favors B removal. With the increase of Sn to 50% of the alloy, the final B content decreased to 1.1 × 10^(-4) wt%, 93.9% removal efficiency.展开更多
文摘[Objective] This study aimed to investigate the characteristics of phosphorus adsorption on boiler slag and optimize the adsorption process. [Method] Boiler slag was used as an adsorbent in the single-grade adsorption process to dispose the rural domestic sewage. During the course, phosphorus adsorption kinetics and thermodynamics, adsorption operating curve and the minimum boiler slag dosage were analyzed and calculated. [Result] Langmuir adsorption isotherm could be applied to describe the absorption of phosphorus with boiler slag, and the absorption kinetics was confirmed with the pseudo second-order equation. The maximum absorption quantity and the initial absorption rate increased with the rise of temperature, reaching up to 0.159 1 mg/g and 0.169 8 mg/(g·min) respectively at 40 ℃. Thermodynamic variables ΔG0<0 and ΔH0>0 indicated that the entire process was a spontaneous endothermic reaction, and high temperature would facilitate the reaction of absorption. In the single grade adsorption, the minimum adsorbent dosage decreased as the temperature rose; at 40 ℃ the optimum mass ratio of boiler slag to wastewater was 3.31 kg/m3. [Conclusion] The adsorption process with boiler slag as adsorbent is an economical and effective approach for treating rural domestic sewage.
基金financially supported by the National Natural Science Foundation of China (Grant Nos. 51334002 and 51604023)
文摘This study investigates a purification process for metallurgical-grade silicon(MG-Si) in which Si is alloyed with tin(Sn) and Ca O–Si O_2–Ca Cl_2 slag is used to remove boron(B) impurity. Acid leaching was performed to remove the Sn phase after slag refining to recover high-purity Si from the Si–Sn alloy. The effect of refining time was investigated, and acceptable refining results were realized within 15 min. The effects of slag composition and Sn content on the removal of B were also studied. The results indicate that increasing Sn content favors B removal. With the increase of Sn to 50% of the alloy, the final B content decreased to 1.1 × 10^(-4) wt%, 93.9% removal efficiency.
