The crucial effect of compressibility of rods on their instability is novelly demonstrated via singularity theory. It is shown that the critical load of compressible rod is always greater than the one of the Euler rod...The crucial effect of compressibility of rods on their instability is novelly demonstrated via singularity theory. It is shown that the critical load of compressible rod is always greater than the one of the Euler rod, and a subcritical pitchfork bifurcation, which cannot occur for the Euler rod, may occur for a compressible rod. A whole bifurcation diagram of compressible rods is as follows ： when the original slenderness ratio of a compressible rod, $o is smaller than （1 ＋ v/3 √3π/2,, the rod does not buckle; when So∈ [1＋ v/3）3√3π/2 ,（1＋v/5）5 5√5π/4）,the rod may undergo a subcritical pitchfork bifurcation and a collapse may occur; when So ∈ [1＋ v/5）5√5π/4 ＋ ∞）, the rod may undergo a supercritical pitchfork bifurcation. The deformation of cross section of rods causes a little shift of bifurcation points towards to the one corresponding to larger slenderness ratio.展开更多
This paper analyses perturbations of Noether symmetry, Lie symmetry, and form invariance for super-long elastic slender rod systems. Criterion and structure equations of the symmetries after disturbance are proposed. ...This paper analyses perturbations of Noether symmetry, Lie symmetry, and form invariance for super-long elastic slender rod systems. Criterion and structure equations of the symmetries after disturbance are proposed. Considering perturbation of all infinitesimal generators, three types of adiabatic invariants induced by perturbation of symmetries for the system are obtained.展开更多
DNA is a nucleic acid molecule with double-helical structures that are special symmetrical structures attracting great attention of numerous researchers. The super-long elastic slender rod, an important structural mod...DNA is a nucleic acid molecule with double-helical structures that are special symmetrical structures attracting great attention of numerous researchers. The super-long elastic slender rod, an important structural model of DNA and other long-train molecules, is a useful tool in analysing the symmetrical properties and the stabilities of DNA. This paper studies the structural properties of a super-long elastic slender rod as a structural model of DNA by using Kirchhoff＇s analogue technique and presents the Noether symmetries of the model by using the method of infinitesimal transformation. Baaed on Kirchhoff＇s analogue it analyses the generalized Hamilton canonical equations. The infinitesimal transfornaationa with rcspect to the radial coordinnte, the gonarnlizod coordinates, and the Cluasi-momenta of 5he model are introduced. The Noether gymmetries and conserved qugntities of the model are obtained.展开更多
A numerical model of the steel catenary riser(SCR) is built based on the slender rod model. The slender rod model,which describes the behavior of the slender riser in terms of the center line position, can solve the g...A numerical model of the steel catenary riser(SCR) is built based on the slender rod model. The slender rod model,which describes the behavior of the slender riser in terms of the center line position, can solve the geometrical nonlinearity effectively. In a marine environment, the SCR is under the combined internal flow and external loads,such as wave and current. A general analysis considers only the inertial force and the drag force caused by the wave and current. However, the internal flow has an effect on the SCR; it is essential to explore the dynamic response of the SCR with the internal flow. The SCR also suffers the lift force and the fluctuating drag force because of the current. Finite element method is utilized to solve the motion equations. The effects of the internal flow, wave and current on the dynamic response of the SCR are considered. The results indicate that the increase of the internal flow density leads to the decrease of the displacement of the SCR, while the internal flow velocity has little effect on the SCR. The displacement of the SCR increases with the increase of the wave height and period. And the increasing wave period results in an increase in the vibration period of the SCR. The current velocity changes the displacements of the SCR in x-and z-directions. The vibration frequency of the SCR in y-direction increases with the increase of the current velocity.展开更多
A method to identify complex Young＇s modulus of viscoelastic materials using forced longitudinal vibration of slender rods is proposed. The method differs from the beam one. Experimental tests were carried out at roo...A method to identify complex Young＇s modulus of viscoelastic materials using forced longitudinal vibration of slender rods is proposed. The method differs from the beam one. Experimental tests were carried out at room temperature with different lengths in 108 mm, 100 mm, 90 ram, 83.5 mm, 80 ram, 74.5 mm, 70 mm for the polycarbonate bars, and the curves of ratios A2/A1 between two ends of a viscoelastic bar versus frequencies are obtained, furthermore, the corresponding 3 dB bandwidth and the storage and loss modulus can be calculated. Sufficient number of obtained complex Young＇s modulus at different frequency allows us to calculate other ones using the least square method. If the step of the tested frequency is 5 Hz, the maximum error of results can be less than 6%. By comparison with the measurement methods which the previous literature mentioned, this new method simplifies the calculation, and the physical meaning appears apparently and clearly.展开更多
Owing to the particularity of a polyester fiber material,the polyester mooring undergoes large axial tensile deformation over long-term use.Large axial tensile deformation significantly impacts the dynamic response of...Owing to the particularity of a polyester fiber material,the polyester mooring undergoes large axial tensile deformation over long-term use.Large axial tensile deformation significantly impacts the dynamic response of the mooring system.In addition,the degrees of large axial tension caused by different elastic moduli are also different,and the force on the mooring line is also different.Therefore,it is of great significance to study the influence of elastic modulus on the dynamic results of the mooring systems under large axial tension.Conventional numerical software fails to consider the axial tension deformation of the mooring.Based on the theory of slender rods,this paper derives the formula for large axial tension using the method of overall coordinates and overall slope coordinates and provides the calculation programs.Considering a polyester mooring system as an example,the calculation program and numerical software are used to calculate and compare the static and dynamic analyses to verify the reliability of the calculation program.To make the force change of the mooring obvious,the elastic moduli of three different orders of magnitude are compared and analyzed,and the dynamic response results after large axial tension are compared.This study concludes that the change in the elastic modulus of the polyester mooring changes the result of the vertex tension by generating an axial tension.The smaller the elastic modulus,the larger the forced oscillation motion amplitude of the top point of the mooring line,the more obvious the axial tension phenomenon,and the smaller the force on the top of the polyester mooring.展开更多
基金Supported by National Natural Science Foundation of China(No. 10272079)joint grant from National Natural Science Foundation of Chinathe Royal Society of UK under their Joint Project Scheme
文摘The crucial effect of compressibility of rods on their instability is novelly demonstrated via singularity theory. It is shown that the critical load of compressible rod is always greater than the one of the Euler rod, and a subcritical pitchfork bifurcation, which cannot occur for the Euler rod, may occur for a compressible rod. A whole bifurcation diagram of compressible rods is as follows ： when the original slenderness ratio of a compressible rod, $o is smaller than （1 ＋ v/3 √3π/2,, the rod does not buckle; when So∈ [1＋ v/3）3√3π/2 ,（1＋v/5）5 5√5π/4）,the rod may undergo a subcritical pitchfork bifurcation and a collapse may occur; when So ∈ [1＋ v/5）5√5π/4 ＋ ∞）, the rod may undergo a supercritical pitchfork bifurcation. The deformation of cross section of rods causes a little shift of bifurcation points towards to the one corresponding to larger slenderness ratio.
基金Project supported by the Natural Science Foundation of Shandong Province of China (Grant No. ZR2009AQ011)Science Foundation of Binzhou University,China (Grant No. BZXYG0903)
文摘This paper analyses perturbations of Noether symmetry, Lie symmetry, and form invariance for super-long elastic slender rod systems. Criterion and structure equations of the symmetries after disturbance are proposed. Considering perturbation of all infinitesimal generators, three types of adiabatic invariants induced by perturbation of symmetries for the system are obtained.
基金supported by the National Natural Science Foundation of China (Grant Nos 10672143 and 60575055)the State Key Laboratory of Scientific and Engineering ComputingChinese Academy of Sciences and the Natural Science Foundation of Henan Province Government of China (Grant No 0511022200)
文摘DNA is a nucleic acid molecule with double-helical structures that are special symmetrical structures attracting great attention of numerous researchers. The super-long elastic slender rod, an important structural model of DNA and other long-train molecules, is a useful tool in analysing the symmetrical properties and the stabilities of DNA. This paper studies the structural properties of a super-long elastic slender rod as a structural model of DNA by using Kirchhoff＇s analogue technique and presents the Noether symmetries of the model by using the method of infinitesimal transformation. Baaed on Kirchhoff＇s analogue it analyses the generalized Hamilton canonical equations. The infinitesimal transfornaationa with rcspect to the radial coordinnte, the gonarnlizod coordinates, and the Cluasi-momenta of 5he model are introduced. The Noether gymmetries and conserved qugntities of the model are obtained.
基金financially supported by the Fundamental Research Funds for the Central Universities(Grant No.201861036)the National Natural Science Foundation of China(Grant No.51279187)+1 种基金the Science and Technology Major Project of Shandong Province(Grant No.2015ZDZX04003)the Key Research and Development Program of Shandong Province(Grant No.2018GHY115045)
文摘A numerical model of the steel catenary riser(SCR) is built based on the slender rod model. The slender rod model,which describes the behavior of the slender riser in terms of the center line position, can solve the geometrical nonlinearity effectively. In a marine environment, the SCR is under the combined internal flow and external loads,such as wave and current. A general analysis considers only the inertial force and the drag force caused by the wave and current. However, the internal flow has an effect on the SCR; it is essential to explore the dynamic response of the SCR with the internal flow. The SCR also suffers the lift force and the fluctuating drag force because of the current. Finite element method is utilized to solve the motion equations. The effects of the internal flow, wave and current on the dynamic response of the SCR are considered. The results indicate that the increase of the internal flow density leads to the decrease of the displacement of the SCR, while the internal flow velocity has little effect on the SCR. The displacement of the SCR increases with the increase of the wave height and period. And the increasing wave period results in an increase in the vibration period of the SCR. The current velocity changes the displacements of the SCR in x-and z-directions. The vibration frequency of the SCR in y-direction increases with the increase of the current velocity.
基金supported by the Fundamental Research Funds of China for the Central Universities(GK201001008)
文摘A method to identify complex Young＇s modulus of viscoelastic materials using forced longitudinal vibration of slender rods is proposed. The method differs from the beam one. Experimental tests were carried out at room temperature with different lengths in 108 mm, 100 mm, 90 ram, 83.5 mm, 80 ram, 74.5 mm, 70 mm for the polycarbonate bars, and the curves of ratios A2/A1 between two ends of a viscoelastic bar versus frequencies are obtained, furthermore, the corresponding 3 dB bandwidth and the storage and loss modulus can be calculated. Sufficient number of obtained complex Young＇s modulus at different frequency allows us to calculate other ones using the least square method. If the step of the tested frequency is 5 Hz, the maximum error of results can be less than 6%. By comparison with the measurement methods which the previous literature mentioned, this new method simplifies the calculation, and the physical meaning appears apparently and clearly.
基金Supported by the Specialized Research Project for LS17-2 Semi-submersible Production Platform(LSZX-2020-HN-05-0405)the Engineering Development Program of Deepwater Semisubmersible Production Storage and Unloading Platform of China(SSBQ-2020-HN-02-04)。
文摘Owing to the particularity of a polyester fiber material,the polyester mooring undergoes large axial tensile deformation over long-term use.Large axial tensile deformation significantly impacts the dynamic response of the mooring system.In addition,the degrees of large axial tension caused by different elastic moduli are also different,and the force on the mooring line is also different.Therefore,it is of great significance to study the influence of elastic modulus on the dynamic results of the mooring systems under large axial tension.Conventional numerical software fails to consider the axial tension deformation of the mooring.Based on the theory of slender rods,this paper derives the formula for large axial tension using the method of overall coordinates and overall slope coordinates and provides the calculation programs.Considering a polyester mooring system as an example,the calculation program and numerical software are used to calculate and compare the static and dynamic analyses to verify the reliability of the calculation program.To make the force change of the mooring obvious,the elastic moduli of three different orders of magnitude are compared and analyzed,and the dynamic response results after large axial tension are compared.This study concludes that the change in the elastic modulus of the polyester mooring changes the result of the vertex tension by generating an axial tension.The smaller the elastic modulus,the larger the forced oscillation motion amplitude of the top point of the mooring line,the more obvious the axial tension phenomenon,and the smaller the force on the top of the polyester mooring.
