In this paper,we investigate the vanishing viscosity limit problem for the 3-dimensional(3D)incompressible Navier-Stokes equations in a general bounded smooth domain of R^3 with the generalized Navier-slip boundary co...In this paper,we investigate the vanishing viscosity limit problem for the 3-dimensional(3D)incompressible Navier-Stokes equations in a general bounded smooth domain of R^3 with the generalized Navier-slip boundary conditions u^ε·n=0,n×(ω^ε)=[Bu^ε]τon∂Ω.Some uniform estimates on rates of convergence in C([0,T],L2(Ω))and C([0,T],H^1(Ω))of the solutions to the corresponding solutions of the ideal Euler equations with the standard slip boundary condition are obtained.展开更多
For the low-order finite element pair P1P1,based on full domain partition technique,a parallel pressure projection stabilized finite element algorithm for the Stokes equation with nonlinear slip boundary con...For the low-order finite element pair P1P1,based on full domain partition technique,a parallel pressure projection stabilized finite element algorithm for the Stokes equation with nonlinear slip boundary conditions is designed and analyzed.From the definition of the subdifferential,the variational formulation of this equation is the variational inequality problem of the second kind.Each subproblem is a global problem on the composite grid,which is easy to program and implement.The optimal error estimates of the approximate solutions are obtained by theoretical analysis since the appropriate stabilization parameter is chosen.Finally,some numerical results are given to demonstrate the hight efficiency of the parallel stabilized finite element algorithm.展开更多
In this article,we have presented the exact solutions of the Couette,Poiseuille and generalized Couette flows of an incompressible magnetohydrodynamic Jeffrey fluid between parallel plates through homogeneous porous m...In this article,we have presented the exact solutions of the Couette,Poiseuille and generalized Couette flows of an incompressible magnetohydrodynamic Jeffrey fluid between parallel plates through homogeneous porous medium.The effects of slip boundary conditions and heat transfer are considered.Viscous dissipation,radiation and Joule heating are also considered in the energy equation.The governing equations of the Jeffrey fluid flow are modeled in Cartesian coordinate system.Analytical solutions for the velocity and temperature the velocity and temperature profiles are studied and the results are presented through graphs.It Temperature behaves as a decreasing function due to the impact of Hartmann number,non-Newtonian parameter and slip parameter in all noted problems.展开更多
The main purpose of this paper is to extend the result obtained by Beirao da Veiga(2000)from the whole-space case to slip boundary cases.Denote by a two components of the velocity u.To fix ideas setū=(u_(1),u_(2),0)(...The main purpose of this paper is to extend the result obtained by Beirao da Veiga(2000)from the whole-space case to slip boundary cases.Denote by a two components of the velocity u.To fix ideas setū=(u_(1),u_(2),0)(the half-space)orū=?_(1)ê_(1)+?_(2)ê_(2)(the general boundary case(see(7.1))).We show that there exists a constant K,which enjoys very simple and significant expressions such that if at some timeτ∈(0,T)one has lim sup_(t→^(τ)-0)‖ū(t)‖_(L^(3)(Ω))^(3)<‖ū(τ)‖_(L^(3)(Ω))^(3)+K,then u is continuous atτwith values in L^(3)(Ω).Roughly speaking,the above norm-discontinuity of merely two components of the velocity cannot occur for steps'amplitudes smaller than K.In particular,if the above condition holds at eachτ∈(0,T),the solution is smooth in(0,T)×Ω.Note that here there is no limitation on the width of the norms‖ū(t)‖_(L^(3)(Ω))^(3)·So K is independent of these quantities.Many other related results are discussed and compared among them.展开更多
We study the initial-boundary value problem of the Navier-Stokes equations for incompressible fluids in a general domain in R^n with compact and smooth boundary, subject to the kinematic and vorticity boundary conditi...We study the initial-boundary value problem of the Navier-Stokes equations for incompressible fluids in a general domain in R^n with compact and smooth boundary, subject to the kinematic and vorticity boundary conditions on the non-flat boundary. We observe that, under the nonhomogeneous boundary conditions, the pressure p can be still recovered by solving the Neumann problem for the Poisson equation. Then we establish the well-posedness of the unsteady Stokes equations and employ the solution to reduce our initial-boundary value problem into an initial-boundary value problem with absolute boundary conditions. Based on this, we first establish the well-posedness for an appropriate local linearized problem with the absolute boundary conditions and the initial condition (without the incompressibility condition), which establishes a velocity mapping. Then we develop apriori estimates for the velocity mapping, especially involving the Sobolev norm for the time-derivative of the mapping to deal with the complicated boundary conditions, which leads to the existence of the fixed point of the mapping and the existence of solutions to our initial-boundary value problem. Finally, we establish that, when the viscosity coefficient tends zero, the strong solutions of the initial-boundary value problem in R^n(n ≥ 3) with nonhomogeneous vorticity boundary condition converge in L^2 to the corresponding Euler equations satisfying the kinematic condition.展开更多
This paper studies the Stokes flow of micro-polar fluids by peristaltic pumping through the cylindrical tube under the effect of the slip boundary condition. The motion of the wall is governed by the sinusoidal wave e...This paper studies the Stokes flow of micro-polar fluids by peristaltic pumping through the cylindrical tube under the effect of the slip boundary condition. The motion of the wall is governed by the sinusoidal wave equation. The analytical and numerical solutions for the axial velocity, the micro-polar vector, the stream function, the pressure gradient, the friction force, and the mechanical efficiency are obtained by using the lu- brication theory under the low Reynolds number and long wavelength approximations. The impacts of the emerging parameters, such as the coupling number, the micro-polar parameter, the slip parameter on pumping characteristics, the friction force, the velocity profile, the mechanical efficiency, and the trapping phenomenon are depicted graphically. The numerical results infer that large pressure is required for peristaltic pumping when the coupling number is large, while opposite behaviors are found for the micro-polar parameter and the slip parameter. The size of the trapped bolus reduces with the increase in the coupling number and the micro-polar parameter, whereas it blows up with the increase in the slip parameter.展开更多
A novel third-order optimized symmetric weighted essentially non-oscillatory(WENO-OS3)scheme is used to simulate the hypersonic shock wave/boundary layer interactions.Firstly,the scheme is presented with the achieveme...A novel third-order optimized symmetric weighted essentially non-oscillatory(WENO-OS3)scheme is used to simulate the hypersonic shock wave/boundary layer interactions.Firstly,the scheme is presented with the achievement of low dissipation in smooth region and robust shock-capturing capabilities in discontinuities.The Maxwell slip boundary conditions are employed to consider the rarefied effect near the surface.Secondly,several validating tests are given to show the good resolution of the WENO-OS3 scheme and the feasibility of the Maxwell slip boundary conditions.Finally,hypersonic flows around the hollow cylinder truncated flare(HCTF)and the25°/55°sharp double cone are studied.Discussions are made on the characteristics of the hypersonic shock wave/boundary layer interactions with and without the consideration of the slip effect.The results indicate that the scheme has a good capability in predicting heat transfer with a high resolution for describing fluid structures.With the slip boundary conditions,the separation region at the corner is smaller and the prediction is more accurate than that with no-slip boundary conditions.展开更多
In this paper, we study a generalized quasi-variational inequality (GQVI for short) with twomultivalued operators and two bifunctions in a Banach space setting. A coupling of the Tychonov fixedpoint principle and the ...In this paper, we study a generalized quasi-variational inequality (GQVI for short) with twomultivalued operators and two bifunctions in a Banach space setting. A coupling of the Tychonov fixedpoint principle and the Katutani-Ky Fan theorem for multivalued maps is employed to prove a new existencetheorem for the GQVI. We also study a nonlinear optimal control problem driven by the GQVI and givesufficient conditions ensuring the existence of an optimal control. Finally, we illustrate the applicability of thetheoretical results in the study of a complicated Oseen problem for non-Newtonian fluids with a nonmonotone andmultivalued slip boundary condition (i.e., a generalized friction constitutive law), a generalized leak boundarycondition, a unilateral contact condition of Signorini’s type and an implicit obstacle effect, in which themultivalued slip boundary condition is described by the generalized Clarke subgradient, and the leak boundarycondition is formulated by the convex subdifferential operator for a convex superpotential.展开更多
The aim of this study is to numerically investigate the impact of boundary slip on electroosmotic flow(EOF) in curved rectangular microchannels. Navier slip boundary conditions were employed at the curved microchannel...The aim of this study is to numerically investigate the impact of boundary slip on electroosmotic flow(EOF) in curved rectangular microchannels. Navier slip boundary conditions were employed at the curved microchannel walls. The electric potential distribution was governed by the Poisson–Boltzmann equation, whereas the velocity distribution was determined by the Navier–Stokes equation. The finite-difference method was employed to solve these two equations. The detailed discussion focuses on the impact of the curvature ratio, electrokinetic width, aspect ratio and slip length on the velocity. The results indicate that the present problem is strongly dependent on these parameters. The results demonstrate that by varying the dimensionless slip length from 0.001 to 0.01 while maintaining a curvature ratio of 0.5 there is a twofold increase in the maximum velocity. Moreover, this increase becomes more pronounced at higher curvature ratios. In addition, the velocity difference between the inner and outer radial regions increases with increasing slip length. Therefore, the incorporation of the slip boundary condition results in an augmented velocity and a more non-uniform velocity distribution. The findings presented here offer valuable insights into the design and optimization of EOF performance in curved hydrophobic microchannels featuring rectangular cross-sections.展开更多
The heat and mass transfer of unsteady MHD two-dimensional mixed convection boundary layer flow over an exponentially porous stretching sheet is presented in this paper. Multiple slip conditions, radiation, suction or...The heat and mass transfer of unsteady MHD two-dimensional mixed convection boundary layer flow over an exponentially porous stretching sheet is presented in this paper. Multiple slip conditions, radiation, suction or blowing, heat generation or absorption along with magnetism and porous medium are incorporated. We reduce the leading equations which are partial differential equations into a family of ordinary differential equations that are non-linear using a set of similarity transformations. The resulting equations with coupled boundary conditions are solved numerically with the aid of bvp4c solver with MATLAB package. The impacts of several non-dimensional governing parameters on the flow fields such as velocity, temperature and concentration profiles along with friction coefficient, temperature gradient and concentration gradient are portrayed graphically and discussed in detail. The result indicates that the magnetic parameter decreases the skin friction coefficient. Thermal boundary layer thickness reduces with increasing radiation parameters and enhances with increasing Prandtl number. It is also observed that the thermal slip parameter depreciates the heat transfer rate and the mass slip parameter diminishes the mass transfer rate. A comparison has been made between the current results and the numerical results of previous studies and observed a very close good agreement.展开更多
The thermal properties and irreversibility of the Jeffrey nanofluid through an upright permeable microchannel are analyzed by means of the Buongiorno model.The effects of the Hall current,exponential space coefficient...The thermal properties and irreversibility of the Jeffrey nanofluid through an upright permeable microchannel are analyzed by means of the Buongiorno model.The effects of the Hall current,exponential space coefficient,nonlinear radiation,and convective and slip boundary conditions on the Jeffrey fluid flow are explored by deliberating the buoyant force and viscous dissipation.The non-dimensionalized equations are obtained by employing a non-dimensional system,and are further resolved by utilizing the shooting approach and the 4th-and 5th-order Runge-Kutta-Fehlberg approaches.The obtained upshots conclude that the amplified Hall parameter will enhance the secondary flow profile.The improvement in the temperature parameter directly affects the thermal profile,and hence the thermal field declines.A comparative analysis of the Newtonian fluid and non-Newtonian fluid(Jeffrey fluid)is carried out with the flow across a porous channel.In the Bejan number,thermal field,and entropy generation,the Jeffrey nanofluid is more highly supported than the Newtonian fluid.展开更多
This paper studies the existence and uniqueness of local strong solutions to an Oldroyd-B model with density-dependent viscosity in a bounded domain Ω ⊂ R<sup>d</sup>, d = 2 or 3 via incompressible limit,...This paper studies the existence and uniqueness of local strong solutions to an Oldroyd-B model with density-dependent viscosity in a bounded domain Ω ⊂ R<sup>d</sup>, d = 2 or 3 via incompressible limit, in which the initial data is “well-prepared” and the velocity field enjoys the slip boundary conditions. The main idea is to derive the uniform energy estimates for nonlinear systems and corresponding incompressible limit.展开更多
The solid-liquid interface, which is ubiquitous in nature and our daily life, plays fundamental roles in a variety of physical-chemical-biological- mechanical phenomena, for example in lubrication, crystal growth, and...The solid-liquid interface, which is ubiquitous in nature and our daily life, plays fundamental roles in a variety of physical-chemical-biological- mechanical phenomena, for example in lubrication, crystal growth, and many biological reactions that govern the building of human body and the functioning of brain. A surge of interests in the moving contact line (MCL) problem, which is still going on today, can be traced back to 1970s primarily because of the exis- tence of the "Huh-Scriven paradox". This paper, mainly from a solid mechanics perspective, describes very briefly the multidisciplinary nature of the MCL problem, then summarizes some major advances in this exciting research area, and some future directions are presented.展开更多
In this paper, both DSMC and Navier-Stokes computational approaches were applied to study micronozzle flow. The effects of inlet condition, wall boundary condition, Reynolds number, micronozzle geometry and Knudsen nu...In this paper, both DSMC and Navier-Stokes computational approaches were applied to study micronozzle flow. The effects of inlet condition, wall boundary condition, Reynolds number, micronozzle geometry and Knudsen number on the micronozzle flow field and propulsion performance were studied in detail. It is found that within the Knudsen number range under consideration, both the methods work to predict flow characteristics inside micronozzles. The continuum method with slip boundary conditions has shown good performance in simulating the formation of a boundary layer inside the nozzle. However, in the nozzle exit lip region, the DSMC method is better due to gas rapid expansion. It is found that with decreasing the inlet pressure, the difference between the continuum model and DSMC results increases due to the enhanced rarefaction effect. The coefficient of discharge and the thrust efficiency increase with increasing the Reynolds number. Thrust is almost proportional to the nozzle width. With dimension enlarged, the nozzle performance becomes better while the rarefaction effects would be somewhat weakened.展开更多
In this paper,the authors study the 1 D steady Boltzmann flow in a channel.The walls of the channel are assumed to have vanishing velocity and given temperaturesθ0andθ1.This problem was studied by Esposito-Lebowitz-...In this paper,the authors study the 1 D steady Boltzmann flow in a channel.The walls of the channel are assumed to have vanishing velocity and given temperaturesθ0andθ1.This problem was studied by Esposito-Lebowitz-Marra(1994,1995)where they showed that the solution tends to a local Maxwellian with parameters satisfying the compressible Navier-Stokes equation with no-slip boundary condition.However,a lot of numerical experiments reveal that the fluid layer does not entirely stick to the boundary.In the regime where the Knudsen number is reasonably small,the slip phenomenon is significant near the boundary.Thus,they revisit this problem by taking into account the slip boundary conditions.Following the lines of[Coron,F.,Derivation of slip boundary conditions for the Navier-Stokes system from the Boltzmann equation,J.Stat.Phys.,54(3-4),1989,829-857],the authors will first give a formal asymptotic analysis to see that the flow governed by the Boltzmann equation is accurately approximated by a superposition of a steady CNS equation with a temperature jump condition and two Knudsen layers located at end points.Then they will establish a uniform L∞estimate on the remainder and derive the slip boundary condition for compressible Navier-Stokes equations rigorously.展开更多
The effects of the Born repulsive force on the stability and dynamics of ultra-thin slipping films under the influences of intermolecular forces are investigated with bifurcation theory and numerical simulation. Resul...The effects of the Born repulsive force on the stability and dynamics of ultra-thin slipping films under the influences of intermolecular forces are investigated with bifurcation theory and numerical simulation. Results show that the repulsive force has a stabilizing effect on the development of perturbations, and can suppress the rupture process induced by the van der Waals attractive force. Although slippage will enhance the growth of disturbances, it does not have influence on the linear cutoff wave number and the final shape of the film thickness as time approaches to infinity.展开更多
A mathematical model is presented for forced convective slip flow of a nanofluid past a radiating stretching/shrinking sheet.Melting boundary condition is taken into account.The nanofluid model involves the Brownian m...A mathematical model is presented for forced convective slip flow of a nanofluid past a radiating stretching/shrinking sheet.Melting boundary condition is taken into account.The nanofluid model involves the Brownian motion and thermophoresis effects.Lie group transformation is used to the transport equations as well as the boundary conditions to develop the similarity equations,before being solved numerically using the Runge-Kutta-Fehlberg fourth-fifth order numerical method.To show the effects of the controlling parameters on the dimensionless velocity,temperature,nanoparticle volume fraction,skin friction factor,local Nusselt,and local Sherwood numbers,numerical results are presented both in graphical and tabular forms.It is found that the friction factor decreases with slip and melting parameters for both stretching/shrinking sheets.It is also found that the Nusselt number decreases with the first order slip while it increases with melting and radiation parameters in both cases.Also,the Sherwood number decreases with the melting parameter both for radiating and non-radiating stretching/shrinking sheets.An excellent agreement is found between the present numerical results and published results.展开更多
Based on our continuum hydrodynamic model for immiscible two-phaseflows at solid surfaces, the stick-slip motion has been predicted for moving contactline at chemically patterned surfaces [Wang et al., J. Fluid Mech.,...Based on our continuum hydrodynamic model for immiscible two-phaseflows at solid surfaces, the stick-slip motion has been predicted for moving contactline at chemically patterned surfaces [Wang et al., J. Fluid Mech., 605 (2008), pp. 59-78].In this paper we show that the continuum predictions can be quantitatively verifiedby molecular dynamics (MD) simulations. Our MD simulations are carried out fortwo immiscible Lennard-Jones fluids confined by two planar solid walls in Poiseuilleflow geometry. In particular, one solid surface is chemically patterned with alternating stripes. For comparison, the continuum model is numerically solved using material parameters directly measured in MD simulations. From oscillatory fluid-fluidinterface to intermittent stick-slip motion of moving contact line, we have quantitativeagreement between the continuum and MD results. This agreement is attributed tothe accurate description down to molecular scale by the generalized Navier boundary condition in our continuum model. Numerical results are also presented for therelaxational dynamics of fluid-fluid interface, in agreement with a theoretical analysisbased on the Onsager principle of minimum energy dissipation.展开更多
This paper deals with the two-level Newton iteration method based on the pressure projection stabilized finite element approximation to solve the numerical solution of the Navier-Stokes type variational inequality pro...This paper deals with the two-level Newton iteration method based on the pressure projection stabilized finite element approximation to solve the numerical solution of the Navier-Stokes type variational inequality problem.We solve a small Navier-Stokes problem on the coarse mesh with mesh size H and solve a large linearized Navier-Stokes problem on the fine mesh with mesh size h.The error estimates derived show that if we choose h=O(|logh|^(1/2)H^(3)),then the two-level method we provide has the same H1 and L^(2) convergence orders of the velocity and the pressure as the one-level stabilized method.However,the L^(2) convergence order of the velocity is not consistent with that of one-level stabilized method.Finally,we give the numerical results to support the theoretical analysis.展开更多
The no-slip boundary condition,i.e.,zero fluid velocity relative to the solid at the fluid-solid interface,has been very successful in describing many macroscopic flows.A problem of principle arises when the no-slip b...The no-slip boundary condition,i.e.,zero fluid velocity relative to the solid at the fluid-solid interface,has been very successful in describing many macroscopic flows.A problem of principle arises when the no-slip boundary condition is used to model the hydrodynamics of immiscible-fluid displacement in the vicinity of the moving contact line,where the interface separating two immiscible fluids intersects the solid wall.Decades ago it was already known that the moving contact line is incompatible with the no-slip boundary condition,since the latter would imply infinite dissipation due to a non-integrable singularity in the stress near the contact line.In this paper we first present an introductory review of the problem.We then present a detailed review of our recent results on the contact-line motion in immiscible two-phase flow,from molecular dynamics(MD)simulations to continuum hydrodynamics calculations.Through extensive MD studies and detailed analysis,we have uncovered the slip boundary condition governing the moving contact line,denoted the generalized Navier boundary condition.We have used this discovery to formulate a continuum hydrodynamic model whose predictions are in remarkable quantitative agreement with the MD simulation results down to the molecular scale.These results serve to affirm the validity of the generalized Navier boundary condition,as well as to open up the possibility of continuum hydrodynamic calculations of immiscible flows that are physically meaningful at the molecular level.展开更多
基金This research is supported in part by NSFC 10971174,and Zheng Ge Ru Foundation,and Hong Kong RGC Earmarked Research Grants CUHK-4041/11P,CUHK-4042/08P,a Focus Area Grant from the Chinese University of Hong Kong,and a grant from Croucher Foundation.
文摘In this paper,we investigate the vanishing viscosity limit problem for the 3-dimensional(3D)incompressible Navier-Stokes equations in a general bounded smooth domain of R^3 with the generalized Navier-slip boundary conditions u^ε·n=0,n×(ω^ε)=[Bu^ε]τon∂Ω.Some uniform estimates on rates of convergence in C([0,T],L2(Ω))and C([0,T],H^1(Ω))of the solutions to the corresponding solutions of the ideal Euler equations with the standard slip boundary condition are obtained.
基金supported by the Natural Science Foundation of China(No.11361016)the Basic and Frontier Explore Program of Chongqing Municipality,China(No.cstc2018jcyjAX0305)Funds for the Central Universities(No.XDJK2018B032).
文摘For the low-order finite element pair P1P1,based on full domain partition technique,a parallel pressure projection stabilized finite element algorithm for the Stokes equation with nonlinear slip boundary conditions is designed and analyzed.From the definition of the subdifferential,the variational formulation of this equation is the variational inequality problem of the second kind.Each subproblem is a global problem on the composite grid,which is easy to program and implement.The optimal error estimates of the approximate solutions are obtained by theoretical analysis since the appropriate stabilization parameter is chosen.Finally,some numerical results are given to demonstrate the hight efficiency of the parallel stabilized finite element algorithm.
文摘In this article,we have presented the exact solutions of the Couette,Poiseuille and generalized Couette flows of an incompressible magnetohydrodynamic Jeffrey fluid between parallel plates through homogeneous porous medium.The effects of slip boundary conditions and heat transfer are considered.Viscous dissipation,radiation and Joule heating are also considered in the energy equation.The governing equations of the Jeffrey fluid flow are modeled in Cartesian coordinate system.Analytical solutions for the velocity and temperature the velocity and temperature profiles are studied and the results are presented through graphs.It Temperature behaves as a decreasing function due to the impact of Hartmann number,non-Newtonian parameter and slip parameter in all noted problems.
基金supported by Portuguese Foundation for Science and Technology(Portugal)(Grant No.UIDB/MAT/04561/2020)supported by National Natural Science Foundation of China(Grant No.12001429)。
文摘The main purpose of this paper is to extend the result obtained by Beirao da Veiga(2000)from the whole-space case to slip boundary cases.Denote by a two components of the velocity u.To fix ideas setū=(u_(1),u_(2),0)(the half-space)orū=?_(1)ê_(1)+?_(2)ê_(2)(the general boundary case(see(7.1))).We show that there exists a constant K,which enjoys very simple and significant expressions such that if at some timeτ∈(0,T)one has lim sup_(t→^(τ)-0)‖ū(t)‖_(L^(3)(Ω))^(3)<‖ū(τ)‖_(L^(3)(Ω))^(3)+K,then u is continuous atτwith values in L^(3)(Ω).Roughly speaking,the above norm-discontinuity of merely two components of the velocity cannot occur for steps'amplitudes smaller than K.In particular,if the above condition holds at eachτ∈(0,T),the solution is smooth in(0,T)×Ω.Note that here there is no limitation on the width of the norms‖ū(t)‖_(L^(3)(Ω))^(3)·So K is independent of these quantities.Many other related results are discussed and compared among them.
基金supported in part by the National Science Foundation under Grants DMS-0807551, DMS-0720925, and DMS-0505473the Natural Science Foundationof China (10728101)supported in part by EPSRC grant EP/F029578/1
文摘We study the initial-boundary value problem of the Navier-Stokes equations for incompressible fluids in a general domain in R^n with compact and smooth boundary, subject to the kinematic and vorticity boundary conditions on the non-flat boundary. We observe that, under the nonhomogeneous boundary conditions, the pressure p can be still recovered by solving the Neumann problem for the Poisson equation. Then we establish the well-posedness of the unsteady Stokes equations and employ the solution to reduce our initial-boundary value problem into an initial-boundary value problem with absolute boundary conditions. Based on this, we first establish the well-posedness for an appropriate local linearized problem with the absolute boundary conditions and the initial condition (without the incompressibility condition), which establishes a velocity mapping. Then we develop apriori estimates for the velocity mapping, especially involving the Sobolev norm for the time-derivative of the mapping to deal with the complicated boundary conditions, which leads to the existence of the fixed point of the mapping and the existence of solutions to our initial-boundary value problem. Finally, we establish that, when the viscosity coefficient tends zero, the strong solutions of the initial-boundary value problem in R^n(n ≥ 3) with nonhomogeneous vorticity boundary condition converge in L^2 to the corresponding Euler equations satisfying the kinematic condition.
文摘This paper studies the Stokes flow of micro-polar fluids by peristaltic pumping through the cylindrical tube under the effect of the slip boundary condition. The motion of the wall is governed by the sinusoidal wave equation. The analytical and numerical solutions for the axial velocity, the micro-polar vector, the stream function, the pressure gradient, the friction force, and the mechanical efficiency are obtained by using the lu- brication theory under the low Reynolds number and long wavelength approximations. The impacts of the emerging parameters, such as the coupling number, the micro-polar parameter, the slip parameter on pumping characteristics, the friction force, the velocity profile, the mechanical efficiency, and the trapping phenomenon are depicted graphically. The numerical results infer that large pressure is required for peristaltic pumping when the coupling number is large, while opposite behaviors are found for the micro-polar parameter and the slip parameter. The size of the trapped bolus reduces with the increase in the coupling number and the micro-polar parameter, whereas it blows up with the increase in the slip parameter.
基金supported by the National Key Basic Research and Development Program (No.2014CB744100)
文摘A novel third-order optimized symmetric weighted essentially non-oscillatory(WENO-OS3)scheme is used to simulate the hypersonic shock wave/boundary layer interactions.Firstly,the scheme is presented with the achievement of low dissipation in smooth region and robust shock-capturing capabilities in discontinuities.The Maxwell slip boundary conditions are employed to consider the rarefied effect near the surface.Secondly,several validating tests are given to show the good resolution of the WENO-OS3 scheme and the feasibility of the Maxwell slip boundary conditions.Finally,hypersonic flows around the hollow cylinder truncated flare(HCTF)and the25°/55°sharp double cone are studied.Discussions are made on the characteristics of the hypersonic shock wave/boundary layer interactions with and without the consideration of the slip effect.The results indicate that the scheme has a good capability in predicting heat transfer with a high resolution for describing fluid structures.With the slip boundary conditions,the separation region at the corner is smaller and the prediction is more accurate than that with no-slip boundary conditions.
基金The first author was supported by the Guangxi Natural Science Foundation of China(Grant No.2021GXNSFFA196004)National Natural Science Foundation of China(Grant No.12001478)+4 种基金Horizon 2020 of the European Union(Grant No.823731 CONMECH)National Science Center of Poland(Grant No.2017/25/N/ST1/00611)The second author was supported by National Science Foundation of USA(Grant No.DMS 1720067)The third author was supported by the National Science Center of Poland(Grant No.2021/41/B/ST1/01636)the Ministry of Science and Higher Education of Poland(Grant Nos.4004/GGPJII/H2020/2018/0 and 440328/PnH2/2019)。
文摘In this paper, we study a generalized quasi-variational inequality (GQVI for short) with twomultivalued operators and two bifunctions in a Banach space setting. A coupling of the Tychonov fixedpoint principle and the Katutani-Ky Fan theorem for multivalued maps is employed to prove a new existencetheorem for the GQVI. We also study a nonlinear optimal control problem driven by the GQVI and givesufficient conditions ensuring the existence of an optimal control. Finally, we illustrate the applicability of thetheoretical results in the study of a complicated Oseen problem for non-Newtonian fluids with a nonmonotone andmultivalued slip boundary condition (i.e., a generalized friction constitutive law), a generalized leak boundarycondition, a unilateral contact condition of Signorini’s type and an implicit obstacle effect, in which themultivalued slip boundary condition is described by the generalized Clarke subgradient, and the leak boundarycondition is formulated by the convex subdifferential operator for a convex superpotential.
基金Project supported by the Natural Science Foundation of Inner Mongolia of China(Grant No.2021BS01008)the Program for Innovative Research Team in Universities of Inner Mongolia Autonomous Region(Grant No.NMGIRT2323)the Scientific Research Funding Project for introduced high level talents of IMNU(Grant No.2020YJRC014)。
文摘The aim of this study is to numerically investigate the impact of boundary slip on electroosmotic flow(EOF) in curved rectangular microchannels. Navier slip boundary conditions were employed at the curved microchannel walls. The electric potential distribution was governed by the Poisson–Boltzmann equation, whereas the velocity distribution was determined by the Navier–Stokes equation. The finite-difference method was employed to solve these two equations. The detailed discussion focuses on the impact of the curvature ratio, electrokinetic width, aspect ratio and slip length on the velocity. The results indicate that the present problem is strongly dependent on these parameters. The results demonstrate that by varying the dimensionless slip length from 0.001 to 0.01 while maintaining a curvature ratio of 0.5 there is a twofold increase in the maximum velocity. Moreover, this increase becomes more pronounced at higher curvature ratios. In addition, the velocity difference between the inner and outer radial regions increases with increasing slip length. Therefore, the incorporation of the slip boundary condition results in an augmented velocity and a more non-uniform velocity distribution. The findings presented here offer valuable insights into the design and optimization of EOF performance in curved hydrophobic microchannels featuring rectangular cross-sections.
文摘The heat and mass transfer of unsteady MHD two-dimensional mixed convection boundary layer flow over an exponentially porous stretching sheet is presented in this paper. Multiple slip conditions, radiation, suction or blowing, heat generation or absorption along with magnetism and porous medium are incorporated. We reduce the leading equations which are partial differential equations into a family of ordinary differential equations that are non-linear using a set of similarity transformations. The resulting equations with coupled boundary conditions are solved numerically with the aid of bvp4c solver with MATLAB package. The impacts of several non-dimensional governing parameters on the flow fields such as velocity, temperature and concentration profiles along with friction coefficient, temperature gradient and concentration gradient are portrayed graphically and discussed in detail. The result indicates that the magnetic parameter decreases the skin friction coefficient. Thermal boundary layer thickness reduces with increasing radiation parameters and enhances with increasing Prandtl number. It is also observed that the thermal slip parameter depreciates the heat transfer rate and the mass slip parameter diminishes the mass transfer rate. A comparison has been made between the current results and the numerical results of previous studies and observed a very close good agreement.
文摘The thermal properties and irreversibility of the Jeffrey nanofluid through an upright permeable microchannel are analyzed by means of the Buongiorno model.The effects of the Hall current,exponential space coefficient,nonlinear radiation,and convective and slip boundary conditions on the Jeffrey fluid flow are explored by deliberating the buoyant force and viscous dissipation.The non-dimensionalized equations are obtained by employing a non-dimensional system,and are further resolved by utilizing the shooting approach and the 4th-and 5th-order Runge-Kutta-Fehlberg approaches.The obtained upshots conclude that the amplified Hall parameter will enhance the secondary flow profile.The improvement in the temperature parameter directly affects the thermal profile,and hence the thermal field declines.A comparative analysis of the Newtonian fluid and non-Newtonian fluid(Jeffrey fluid)is carried out with the flow across a porous channel.In the Bejan number,thermal field,and entropy generation,the Jeffrey nanofluid is more highly supported than the Newtonian fluid.
文摘This paper studies the existence and uniqueness of local strong solutions to an Oldroyd-B model with density-dependent viscosity in a bounded domain Ω ⊂ R<sup>d</sup>, d = 2 or 3 via incompressible limit, in which the initial data is “well-prepared” and the velocity field enjoys the slip boundary conditions. The main idea is to derive the uniform energy estimates for nonlinear systems and corresponding incompressible limit.
基金supported by the National Natural Science Foundation of China(11372313)the Key Research Program of the Chinese Academy of Sciences(KJZD-EW-M01)+1 种基金the Instrument Developing Project ofthe CAS(Y2010031)the CAS/SAFEA International Partnership Program for Creative Research Teams
文摘The solid-liquid interface, which is ubiquitous in nature and our daily life, plays fundamental roles in a variety of physical-chemical-biological- mechanical phenomena, for example in lubrication, crystal growth, and many biological reactions that govern the building of human body and the functioning of brain. A surge of interests in the moving contact line (MCL) problem, which is still going on today, can be traced back to 1970s primarily because of the exis- tence of the "Huh-Scriven paradox". This paper, mainly from a solid mechanics perspective, describes very briefly the multidisciplinary nature of the MCL problem, then summarizes some major advances in this exciting research area, and some future directions are presented.
基金The project supported by the National Natural Science Foundation of China (10372099). The English text was polished by Boyi Wang
文摘In this paper, both DSMC and Navier-Stokes computational approaches were applied to study micronozzle flow. The effects of inlet condition, wall boundary condition, Reynolds number, micronozzle geometry and Knudsen number on the micronozzle flow field and propulsion performance were studied in detail. It is found that within the Knudsen number range under consideration, both the methods work to predict flow characteristics inside micronozzles. The continuum method with slip boundary conditions has shown good performance in simulating the formation of a boundary layer inside the nozzle. However, in the nozzle exit lip region, the DSMC method is better due to gas rapid expansion. It is found that with decreasing the inlet pressure, the difference between the continuum model and DSMC results increases due to the enhanced rarefaction effect. The coefficient of discharge and the thrust efficiency increase with increasing the Reynolds number. Thrust is almost proportional to the nozzle width. With dimension enlarged, the nozzle performance becomes better while the rarefaction effects would be somewhat weakened.
基金supported by the National Natural Science Foundation of China(Nos.11971201,11731008)the General Research Fund from RGC of Hong Kong(No.14301719)+1 种基金a Direct Grant from CUHK(No.4053397)the Fundamental Research Funds for the Central Universities and a fellowship award from the Research Grants Council of the Hong Kong Special Administrative Region,China(No.SRF2021-1S01)。
文摘In this paper,the authors study the 1 D steady Boltzmann flow in a channel.The walls of the channel are assumed to have vanishing velocity and given temperaturesθ0andθ1.This problem was studied by Esposito-Lebowitz-Marra(1994,1995)where they showed that the solution tends to a local Maxwellian with parameters satisfying the compressible Navier-Stokes equation with no-slip boundary condition.However,a lot of numerical experiments reveal that the fluid layer does not entirely stick to the boundary.In the regime where the Knudsen number is reasonably small,the slip phenomenon is significant near the boundary.Thus,they revisit this problem by taking into account the slip boundary conditions.Following the lines of[Coron,F.,Derivation of slip boundary conditions for the Navier-Stokes system from the Boltzmann equation,J.Stat.Phys.,54(3-4),1989,829-857],the authors will first give a formal asymptotic analysis to see that the flow governed by the Boltzmann equation is accurately approximated by a superposition of a steady CNS equation with a temperature jump condition and two Knudsen layers located at end points.Then they will establish a uniform L∞estimate on the remainder and derive the slip boundary condition for compressible Navier-Stokes equations rigorously.
基金Project supported by the National Natural Science Foundation of China (Grant No:10472062 ) and Shanghai Leading Academic Discipline Project (Grant No: Y0103 ).
文摘The effects of the Born repulsive force on the stability and dynamics of ultra-thin slipping films under the influences of intermolecular forces are investigated with bifurcation theory and numerical simulation. Results show that the repulsive force has a stabilizing effect on the development of perturbations, and can suppress the rupture process induced by the van der Waals attractive force. Although slippage will enhance the growth of disturbances, it does not have influence on the linear cutoff wave number and the final shape of the film thickness as time approaches to infinity.
基金Universiti Sains Malaysia,RU Grant 1001/PMATHS/81125.
文摘A mathematical model is presented for forced convective slip flow of a nanofluid past a radiating stretching/shrinking sheet.Melting boundary condition is taken into account.The nanofluid model involves the Brownian motion and thermophoresis effects.Lie group transformation is used to the transport equations as well as the boundary conditions to develop the similarity equations,before being solved numerically using the Runge-Kutta-Fehlberg fourth-fifth order numerical method.To show the effects of the controlling parameters on the dimensionless velocity,temperature,nanoparticle volume fraction,skin friction factor,local Nusselt,and local Sherwood numbers,numerical results are presented both in graphical and tabular forms.It is found that the friction factor decreases with slip and melting parameters for both stretching/shrinking sheets.It is also found that the Nusselt number decreases with the first order slip while it increases with melting and radiation parameters in both cases.Also,the Sherwood number decreases with the melting parameter both for radiating and non-radiating stretching/shrinking sheets.An excellent agreement is found between the present numerical results and published results.
基金This publication is based on work partially supported by Award No.SA-C0040/UKC0016made by King Abdullah University of Science and Technology(KAUST),Hong Kong RGC grant CA05/06.SC01the Croucher Foundation Grant Z0138.T.Qian was also supported by Hong Kong RGC grant No.602007.
文摘Based on our continuum hydrodynamic model for immiscible two-phaseflows at solid surfaces, the stick-slip motion has been predicted for moving contactline at chemically patterned surfaces [Wang et al., J. Fluid Mech., 605 (2008), pp. 59-78].In this paper we show that the continuum predictions can be quantitatively verifiedby molecular dynamics (MD) simulations. Our MD simulations are carried out fortwo immiscible Lennard-Jones fluids confined by two planar solid walls in Poiseuilleflow geometry. In particular, one solid surface is chemically patterned with alternating stripes. For comparison, the continuum model is numerically solved using material parameters directly measured in MD simulations. From oscillatory fluid-fluidinterface to intermittent stick-slip motion of moving contact line, we have quantitativeagreement between the continuum and MD results. This agreement is attributed tothe accurate description down to molecular scale by the generalized Navier boundary condition in our continuum model. Numerical results are also presented for therelaxational dynamics of fluid-fluid interface, in agreement with a theoretical analysisbased on the Onsager principle of minimum energy dissipation.
基金funded by the National Natural Science Foundation of China under Grant No.10901122 and No.11001205by Zhejiang Provincial Natural Science Foundation of China under Grant No.LY12A01015.
文摘This paper deals with the two-level Newton iteration method based on the pressure projection stabilized finite element approximation to solve the numerical solution of the Navier-Stokes type variational inequality problem.We solve a small Navier-Stokes problem on the coarse mesh with mesh size H and solve a large linearized Navier-Stokes problem on the fine mesh with mesh size h.The error estimates derived show that if we choose h=O(|logh|^(1/2)H^(3)),then the two-level method we provide has the same H1 and L^(2) convergence orders of the velocity and the pressure as the one-level stabilized method.However,the L^(2) convergence order of the velocity is not consistent with that of one-level stabilized method.Finally,we give the numerical results to support the theoretical analysis.
基金supported by the grants DAG03/04.SC21 and RGC-CERG 604803。
文摘The no-slip boundary condition,i.e.,zero fluid velocity relative to the solid at the fluid-solid interface,has been very successful in describing many macroscopic flows.A problem of principle arises when the no-slip boundary condition is used to model the hydrodynamics of immiscible-fluid displacement in the vicinity of the moving contact line,where the interface separating two immiscible fluids intersects the solid wall.Decades ago it was already known that the moving contact line is incompatible with the no-slip boundary condition,since the latter would imply infinite dissipation due to a non-integrable singularity in the stress near the contact line.In this paper we first present an introductory review of the problem.We then present a detailed review of our recent results on the contact-line motion in immiscible two-phase flow,from molecular dynamics(MD)simulations to continuum hydrodynamics calculations.Through extensive MD studies and detailed analysis,we have uncovered the slip boundary condition governing the moving contact line,denoted the generalized Navier boundary condition.We have used this discovery to formulate a continuum hydrodynamic model whose predictions are in remarkable quantitative agreement with the MD simulation results down to the molecular scale.These results serve to affirm the validity of the generalized Navier boundary condition,as well as to open up the possibility of continuum hydrodynamic calculations of immiscible flows that are physically meaningful at the molecular level.