Based on the upper bound limit analysis theorem and the shear strength reduction technique, the equation for expressing critical limit-equilibrium state was employed to define the safety factor of a given slope and it...Based on the upper bound limit analysis theorem and the shear strength reduction technique, the equation for expressing critical limit-equilibrium state was employed to define the safety factor of a given slope and its corresponding critical failure mechanism by means of the kinematical approach of limit analysis theory. The nonlinear shear strength parameters were treated as variable parameters and a kinematically admissible failure mechanism was considered for calculation schemes. The iterative optimization method was adopted to obtain the safety factors. Case study and comparative analysis show that solutions presented here agree with available predictions when nonlinear criterion reduces to linear criterion, and the validity of present method could be illuminated. From the numerical results, it can also be seen that nonlinear parameter rn, slope foot gradient ,β, height of slope H, slope top gradient a and soil bulk density γ have significant effects on the safety factor of the slope.展开更多
The failure mechanism of two-dimensional（2D） and three-dimensional（3D） slopes were investigated by using the strength reduction method.An extensive study of 3D effect was conducted with respect to boundary conditi...The failure mechanism of two-dimensional（2D） and three-dimensional（3D） slopes were investigated by using the strength reduction method.An extensive study of 3D effect was conducted with respect to boundary conditions,shear strength and concentrated surcharge load.The results obtained by 2D and 3D analyses were compared and the applicable scope of 2D and 3D method was analyzed.The results of the numerical simulation show that 3D effect is sensitive to the width of slip surface.As for slopes with specific geometry,3D effect is influenced by dimensionless parameter c/（γHtanφ）.For those infinite slopes with local loading,external load has the major impact on failure mode.For those slopes with local loading and geometric constraints,the failure mode is influenced by both factors.With the increase of loading length,boundary condition exerts a more significant impact on the failure mode,and then 2D and 3D stability charts are developed,which provides a rapid and reliable way to calculate 2D and 3D factor of safety without iteration.Finally,a simple and practical calculation procedure based on the study of 3D effect and stability charts is proposed to recognize the right time to apply 2D or 3D method.展开更多
Stability of an ancient landslide in a reservoir area is analyzed by using centrifugal model tests, soil laboratory tests and numerical analysis. Special attention is paid to variation in water level, simulation of la...Stability of an ancient landslide in a reservoir area is analyzed by using centrifugal model tests, soil laboratory tests and numerical analysis. Special attention is paid to variation in water level, simulation of large-scale heterogeneous prototype slope, and strength reduction of sliding zone soils after slope sliding. The results of centrifugal model test show that reservoir impounding can reduce sliding resistance at the slope toe, followed by toe collapsing and front cracking of slope. Rapid drawdown can produce hydrodynamic pressure towards reservoir at the front of slope. Deformation is observed in the middle and upper slope, which reduces the slope stability further and forms the pull-typed landslide trend. Reinforcement of slope toe is effective for preventing the progressive failure. The results of laboratory test show that slope toe sliding will lead to the redistribution of soil density and moisture content, which will reduce the shear strength of soil in sliding zone, and the cohesion of immersed soil is reduced gradually and finally vanishes with time. The numerical results show that the strength reduction method used in finite element method (FEM) is very effective in capturing the progressive failure induced by reservoir water level fluctuations, and the evolution of failure surface derived from numerical simulation is very similar to that observed in centrifugal model test.展开更多
Taizishang slope of Qingjiang Reservoir in Huibei is within the range of atomization rainfall. The authors created the finite element model with ANSYS 10.0 and used strength reduction FEM to calculate thesafety coeffi...Taizishang slope of Qingjiang Reservoir in Huibei is within the range of atomization rainfall. The authors created the finite element model with ANSYS 10.0 and used strength reduction FEM to calculate thesafety coefficient of the slope on conditions with no rain, and theatomization rainfall lasting for 0.2 hours and 0.4 hours. The results show that the atomization rainfall would decrease the stability of the slope, and with rainfalls increasing, the stability would reduce much more.展开更多
基金Project(2006318802111) supported by West Traffic Construction Science and Technology of ChinaProject(2008yb004) supported by Excellent Doctorate Dissertations of Central South University, China Project(2008G032-3) supported by Key Item of Science and Technology Research of Railway Ministry of China
文摘Based on the upper bound limit analysis theorem and the shear strength reduction technique, the equation for expressing critical limit-equilibrium state was employed to define the safety factor of a given slope and its corresponding critical failure mechanism by means of the kinematical approach of limit analysis theory. The nonlinear shear strength parameters were treated as variable parameters and a kinematically admissible failure mechanism was considered for calculation schemes. The iterative optimization method was adopted to obtain the safety factors. Case study and comparative analysis show that solutions presented here agree with available predictions when nonlinear criterion reduces to linear criterion, and the validity of present method could be illuminated. From the numerical results, it can also be seen that nonlinear parameter rn, slope foot gradient ,β, height of slope H, slope top gradient a and soil bulk density γ have significant effects on the safety factor of the slope.
基金Project (10972238) supported by the National Natural Science Foundation of ChinaProject (2010ssxt237) supported by the Excellent Doctoral Thesis Program of Central South University,China
文摘The failure mechanism of two-dimensional（2D） and three-dimensional（3D） slopes were investigated by using the strength reduction method.An extensive study of 3D effect was conducted with respect to boundary conditions,shear strength and concentrated surcharge load.The results obtained by 2D and 3D analyses were compared and the applicable scope of 2D and 3D method was analyzed.The results of the numerical simulation show that 3D effect is sensitive to the width of slip surface.As for slopes with specific geometry,3D effect is influenced by dimensionless parameter c/（γHtanφ）.For those infinite slopes with local loading,external load has the major impact on failure mode.For those slopes with local loading and geometric constraints,the failure mode is influenced by both factors.With the increase of loading length,boundary condition exerts a more significant impact on the failure mode,and then 2D and 3D stability charts are developed,which provides a rapid and reliable way to calculate 2D and 3D factor of safety without iteration.Finally,a simple and practical calculation procedure based on the study of 3D effect and stability charts is proposed to recognize the right time to apply 2D or 3D method.
基金Supported by the National Natural Science Foundation of China (11072088)Guangdong Provincial Water Resources Science and Technology Project (ysk2009-01)
文摘Stability of an ancient landslide in a reservoir area is analyzed by using centrifugal model tests, soil laboratory tests and numerical analysis. Special attention is paid to variation in water level, simulation of large-scale heterogeneous prototype slope, and strength reduction of sliding zone soils after slope sliding. The results of centrifugal model test show that reservoir impounding can reduce sliding resistance at the slope toe, followed by toe collapsing and front cracking of slope. Rapid drawdown can produce hydrodynamic pressure towards reservoir at the front of slope. Deformation is observed in the middle and upper slope, which reduces the slope stability further and forms the pull-typed landslide trend. Reinforcement of slope toe is effective for preventing the progressive failure. The results of laboratory test show that slope toe sliding will lead to the redistribution of soil density and moisture content, which will reduce the shear strength of soil in sliding zone, and the cohesion of immersed soil is reduced gradually and finally vanishes with time. The numerical results show that the strength reduction method used in finite element method (FEM) is very effective in capturing the progressive failure induced by reservoir water level fluctuations, and the evolution of failure surface derived from numerical simulation is very similar to that observed in centrifugal model test.
文摘Taizishang slope of Qingjiang Reservoir in Huibei is within the range of atomization rainfall. The authors created the finite element model with ANSYS 10.0 and used strength reduction FEM to calculate thesafety coefficient of the slope on conditions with no rain, and theatomization rainfall lasting for 0.2 hours and 0.4 hours. The results show that the atomization rainfall would decrease the stability of the slope, and with rainfalls increasing, the stability would reduce much more.
