Metal-Organic Framework Enabling Poly(Vinylidene Fluoride)-Based Polymer Electrolyte for Dendrite-Free and Long-Lifespan Sodium Metal Batteries

Sodium dentrite formed by uneven plating/stripping can reduce the utilization of active sodium with poor cyclic stability and,more importantly,cause internal short circuit and lead to thermal runaway and fire.Therefore,sodium dendrites and their related problems seriously hinder the practical application of sodium metal batteries(SMBs).Herein,a design concept for the incorporation of metal-organic framework(MOF)in polymer matrix(polyvinylidene fluoride-hexafluoropropylene)is practiced to prepare a novel gel polymer electrolyte(PH@MOF polymer-based electrolyte[GPE])and thus to achieve high-performance SMBs.The addition of the MOF particles can not only reduce the movement hindrance of polymer chains to promote the transfer of Na^(+)but also anchor anions by virtue of their negative charge to reduce polarization during electrochemical reaction.A stable cycling performance with tiny overpotential for over 800 h at a current density of 5 mA cm^(-2)with areal capacity of 5 mA h cm^(-2)is achieved by symmetric cells based on the resulted GPE while the Na_(3)V_(2)O_(2)(PO_(4))_(2)F@rGO(NVOPF)|PH@MOF|Nacell also displays impressive specific cycling capacity(113.3 mA h g^(-1)at 1 C)and rate capability with considerable capacity retention.

The effect of salt anion in ether‐based electrolyte for electrochemical performance of sodium‐ion batteries:A case study of hard carbon

Compared with the extensively used ester‐based electrolyte,the hard carbon(HC)electrode is more compatible with the ether‐based counterpart in sodium‐ion batteries,which can lead to improved cycling stability and robust rate capability.However,the impact of salt anion on the electrochemical performance of HC electrodes has yet to be fully understood.In this study,the anionic chemistry in regulating the stability of electrolytes and the performance of sodium‐ion batteries have been systematically investigated.This work shows discrepancies in the reductive stability of the anionic group,redox kinetics,and component/structure of solid electrolyte interface(SEI)with different salts(NaBF_(4),NaPF_(6),and NaSO_(3)CF_(3))in the typical ether solvent(diglyme).Particularly,the density functional theory calculation manifests the preferred decomposition of PF_(6)−due to the reduced reductive stability of anions in the solvation structure,thus leading to the formation of NaF‐rich SEI.Further investigation on redox kinetics reveals that the NaPF_(6)/diglyme can induce the fast ionic diffusion dynamic and low charge transfer barrier for HC electrode,thus resulting in superior sodium storage performance in terms of rate capability and cycling life,which outperforms those of NaBF_(4)/diglyme and NaSO_(3)CF_(3)/diglyme.Importantly,this work offers valuable insights for optimizing the electrochemical behaviors of electrode materials by regulating the anionic group in the electrolyte.

Overcoming the Na-ion conductivity bottleneck for the cost-competitive chloride solid electrolytes

Chloride solid electrolytes possess multiple advantages for the construction of safe,energy-dense allsolid-state sodium batteries,but presently the chlorides with sufficiently high cost-competitiveness for commercialization almost all exhibit low Na-ion conductivities of around 10^(-5)S cm^(-1)or lower.Here,we report a chloride solid electrolyte,Na_(2.7)ZFCl_(5.3)O_(0.7),which reaches a Na-ion conductivity of 2.29×10^(-4)S cm^(-1)at 25℃without involving overly expensive raw materials such as rare-earth chlorides or Na_(2)S.In addition to the efficient ion transport,Na_(2.7)ZrCl_(5.3)O_(0.7)also shows an excellent deformability surpassing that of the widely studied Na_(3)PS_(4),Na_(3)SbS_(4),and Na_(2)ZrCl_(6)solid electrolytes.The combination of these advantages allows the all-solid-state cell based on Na_(2.7)ZrCl_(5.3)O_(0.7)and NaCrO_(2)to realize stable room-temperature cycling at a much higher specific current than those based on other non-viscoelastic chloride solid electrolytes in literature(120 mA g^(-1)vs.12-55 mA g^(-1));after 100 cycles at such a high rate,the Na_(2.7)ZFCl_(5.3)O_(0.7)-based cell can still deliver a discharge capacity of 80 mAh g^(-1)at25℃.

Enhanced Anion-Derived Inorganic-Dominated Solid Electrolyte Interphases for High-Rate and Stable Sodium Storage

It is highly desirable for the promising sodium storage possessing high rate and long stable capability,which are mainly hindered by the unstable yet conventional solvent-derived organic-rich solid electrolyte interphases.Herein,an electrolyte solvation chemistry is elaborately manipulated to produce an enhanced anion-derived and inorganic components-dominated solid electrolyte interphases by introducing a low permittivity(4.33)bis(2,2,2-trifluoroethyl)ether diluent into the sodium bis(trifluoromethylsulfonyl)imidedimethoxyethane-based high concentration electrolyte to obtain a localized high concentration electrolyte.The bis(2,2,2-trifluoroethyl)ether breaks the balance of original cation solvation structure and tends to interact with Na^(+)-coordinated dimethoxyethane solvent rather than Na^(+)in high concentration electrolyte,leaving an enhanced Coulombic interaction between Na^(+)and(FSO_(2))_(2)N^(-),and more(FSO_(2))_(2)N^(-)can enter the Na^(+)solvation shell,forming a further increased number of Na^(+)-(FSO_(2))_(2)N^(-)-dimethoxyethane clusters(from 82.0%for high concentration electrolyte to 94.3%for localized high concentration electrolyte)at a low salt dosage.The preferential reduction of this(FSO_(2))_(2)N^(-)-enriched clusters rather than the dimethoxyethane-dominated Na^(+)solvation structure produces an enhanced anion-derived and inorganic components-dominated solid electrolyte interphases.The reversible charge storage process of Na is decoupled by operando Raman along with a shift of D and G peaks.Benefiting from the enhanced anion-derived electrode-electrolyte interface,the commercial hard carbon anode in localized high concentration electrolyte shows a well rate capability(5 A g^(−1),70 mAh g^(−1)),cycle performance and stability(85%of initial capacity after 700 cycles)in comparison to that of high concentration electrolyte(68%)and low concentration electrolyte(only 5%after 400 cycles),indicative of uniqueness and superiorities towards stable Na storage.

Stable sodium anodes for sodium metal batteries(SMBs) enabled by in-situ formed quasi solid-state polymer electrolyte

A high-performance quasi-solid polymer electrolyte for sodium metal batteries(SMBs)based on in-situ polymerized poly(1,3-dioxolane)(DOL)with 20%volume ratio of fluoroethylene carbonate(FEC),termed"PDFE-20",is proposed in this work.It is demonstrated PDFE-20 possesses a room-temperature ionic conductivity of 3.31×10^(-3) S cm^(-1),an ionic diffusion activation energy of 0.10 eV,and an oxidation potential of 4.4 V.SMBs based on PDFE-20 and Na_(3)V_(2)(PO_(4))_(3)(NVP)cathodes were evaluated with an active material mass loading of 6.8 mg cm^(-2).The cell displayed an initial discharge specific capacity of 104 mA h g^(-1),and97.1%capacity retention after 100 cycles at 0.5 C.In-situ polymerization conformally coats the anode/-cathode interfaces,avoiding geometrical gaps and high charge transfer resistance with ex-situ polymerization of the same chemistry.FEC acts as a plasticizer during polymerization to suppress crystallization and significantly improves ionic transport.During battery cycling FEC promotes mechanical congruence of electrolyte-electrode interfaces while forming a stable NaF-rich solid electrolyte interphase(SEI)at the anode.Density functional theory(DFT)calculations were also performed to further understand the role FEC in the poly(DOL)-FEC electrolytes.This work broadens the application of in-situ prepared poly(DOL)electrolytes to sodium storage and demonstrates the crucial role of FEC in improving the electrochemical performance.

Effect of Electrolyte Disturbance on Prognosis of Patients with Traumatic Brain Injury

Objective:To investigate the prognostic value of electrolyte disturbances in patients with traumatic brain injury(TBI).Methods:Cases of TBI patients admitted to the Department of Neurosurgery at Dezhou Second People’s Hospital from September 2015 to September 2021 were analyzed to examine the impact of electrolyte disturbances on patient prognosis and to establish a risk prediction model.Results:Patients with electrolyte disturbances had poorer prognoses,with serum sodium and serum calcium levels significantly affecting the outcomes of patients with traumatic brain injury.Conclusion:Serum sodium and calcium levels may serve as potential prognostic markers in patients with traumatic brain injury.

A stable anthraquinone-derivative cathode to develop sodium metal batteries: The role of ammoniates as electrolytes

Rechargeable sodium metal batteries constitute a cost-effective option for energy storage although sodium shows some drawbacks in terms of reactivity with organic solvents and dendritic growth.Here we demonstrate that an organic dye,indanthrone blue,behaves as an efficient cathode material for the development of secondary sodium metal batteries when combined with novel inorganic electrolytes.These electrolytes are ammonia solvates,known as liquid ammoniates,which can be formulated as NaI·3.3NH_(3) and NaBF_(4)·2.5NH_(3).They impart excellent stability to sodium metal,and they favor sodium non-dendritic growth linked to their exceedingly high sodium ion concentration.This advantage is complemented by a high specific conductivity.The battery described here can last hundreds of cycles at 10 C while keeping a Coulombic efficiency of 99%from the first cycle.Because of the high capacity of the cathode and the superior physicochemical properties of the electrolytes,the battery can reach a specific energy value as high as 210 W h kgIB^(-1),and a high specific power of 2.2 kW kgIB^(-1),even at below room temperature(4℃).Importantly,the battery is based on abundant and cost-effective materials,bearing promise for its application in large-scale energy storage.

Constructing Bidirectional Fluorine-Rich Electrode/Electrolyte Interphase Via Solvent Redistribution toward Long-Term Sodium Battery

The high concentration electrolytes with specific solvation structure could passivate the electrodes to prolong battery cycle life but at the expense of increased cost,which limits the wide application in commercialization.The regular concentration(1_(M))electrolytes with suitable properties(viscosity,ionic conductivity,etc.)are cost-guaranteed,but undesired reactions would always occur and lead to battery degradation during long cycles.To promote the long-term cycle stability in a cost-effective way,this work constructs bidirectional fluorine-rich electrode/electrolyte interphase(EEI)by redistribution of solvents and electrochemical induction.The fluorinated effect with reasonable zoning planning restricts morphological disintegration,meanwhile,forms spatial confinement on cathode.In particular,the obtained cathode electrolyte interphase(CEI)gets the ample ability of Na^(+)transport,which benefits from the fluorinated organics arranged in the epitaxy and the hemi-carbonate content acting on the thickness.Thus,the electrochemical long cycling performance of F-NVPOFⅡF-CC full cells is significantly enhanced(the decay rate at 1 C per cycle is as low as 0.01%).Such a fluorine-rich EEI engineering is expected to take transitional layers against the degradation of cells and make ultra-long cycle batteries possible.

Penetration behavior of electrolyte into graphite cathode in NaF-KF-LiF-AlF_(3) system with low cryolite ratios

The current study focuses on the electrolyte penetration of the graphite cathode in a NaF−KF−LiF−AlF_(3) aluminum-electrolysis system with a cryolite ratio of 1.3.It involves a comprehensive investigation of the electrolyte in the cathode before and after electrolysis by X-ray diffraction and analysis of the results by semi-quantitative calculation in MAUD.The results show that KF can promote electrolyte penetration,with higher KF contents resulting in greater penetration.During electrolyte penetration,K_(2)NaAlF_(6) and solid solutions containing KF play important roles in KF-containing systems.LiF effectively prevents the electrolyte penetration,while the Na_(3)Li_(3)Al_(2)F_(12) phase plays an essential role in systems with high LiF contents.

Development of solid-state electrolytes for sodium-ion battery–A short review

All-solid-state sodium-ion battery is regarded as the next generation battery to replace the current commercial lithium-ion battery, with the advantages of abundant sodium resources, low price and high-level safety. As one critical component in sodium-ion battery, solid-state electrolyte should possess superior operational safety and design simplicity, yet reasonable high room-temperature ionic conductivity. This paper gives a comprehensive review on the recent progress in solid-state electrolyte materials for sodium-ion battery, including inorganic ceramic/glass-ceramic, organic polymer and ceramic-polymer composite electrolytes, and also provides a comparison of the ionic conductivity in various solid-state electrolyte materials. The development of solid-state electrolytes suggests a bright future direction: all solid-state sodium-ion battery could be fully used to power all electric road vehicles, portable electronic devices and large-scale grid support.

Effect of TiB_2 content on resistance to sodium penetration of TiB_2/C cathode composites for aluminium electrolysis

TiB2/C cathode composites with various contents of TiB2 were prepared and their characterizations were observed and compared. The expansion of samples due to sodium and bath penetration was tested with a modified laboratory Rapoport apparatus and the appearances of the cut sections of specimens after electrolysis were studied. The results show that the mass of TiB2/C cathode composites with mass fraction of TiB2 less than 70% appreciably increases, but that of the composites with mass fraction of TiB2 more than 70% decreases slightly after being baked. The resistance to sodium and bath penetration of TiB2/C cathode composites increases with the increase of TiB2 content, especially in the composites with high TiB2 content. TiB2/C cathode composites have high resistance to the penetration of sodium and bath as well as good wettability by molten aluminum, and keep integrality and have little change of appearance after electrolysis, which indicates that TiB2/C cathode composites can be used as inert wettable cathode for aluminum electrolysis.

Innovative discontinuous-SEI constructed in ether-based electrolyte to maximize the capacity of hard carbon anode

Compared with graphite,the lower sodiation potential and larger discharge capacity of hard carbon(HC)makes it the most promising anode material for sodium-ion battery.Utilizing ether-based electrolyte rather than conventional carbonate-based electrolyte,HC achieves superior electrochemical performance.Nevertheless,the mechanism by which ether-based electrolyte improves the properties of HC is still controversial,primarily focusing on whether it forms solid electrolyte interphase(SEI)film.In this work,according to the sodium storage mechanisms in HC at low voltage(<0.1 V),including Na^(+)-diglyme co-interaction into the carbon layer(SEI forbidden)and desolvated Na^(+)insertion in the irregular carbon holes(SEI required),the NaPF6concentration in ether-based electrolyte was regulated,so as to construct a discontinuous-SEI on the surface of the HC anode,which significantly enhances the electrochemical performances of HC.Specifically,with 0.2 M NaPF6ether-based electrolyte,HC deliverers a discharge capacity of 459.7 mA h g^(-1)at 0.1 C and stays at 357.2 mA h g^(-1)after 500 cycles at 1 C,which is substantially higher than that of higher/lower salt concentration electrolytes.

Enabling stable sodium metal cycling by sodiophilic interphase in a polymer electrolyte system

Enabling highly reversible sodium(Na) metal anodes in a polymer electrolyte(PE) system is critical for realizing next-generation batteries with lower cost,higher energy,and improved safety.However,the uneven Na deposition and high Na/PE interphase resistance lead to poor reversibility and short cycle life of Na metal anodes.To tackle these problems,here a variety of metal nanoparticles(M-np,M=Al,Sn,In or Au) are deposited onto copper(Cu) foils to synthesize binder-free M-np@Cu substrates for Na plating/stripping.Notably,the Au-np@Cu substrate provides abundant preferential nucleation/growth sites,decreasing Na nucleation barrier and thus promoting uniform Na deposition.Accordingly,stable Na metal anodes are achieved with high reversible capacities,long cycle life,and high usage of Na.With the Au-np@Cu/Na anode and PE,the full cell using a commercial bulk sulfur cathode exhibits a reversible capacity of>400 mAh g^(-1) with near-100% Coulombic efficiency over 200 cycles.

Engineering optimization approach of nonaqueous electrolyte for sodium ion battery with long cycle life and safety

Electrolyte design strategies are closely related to the capacities, cycle life and safety of sodium–ion batteries. In this study, we aimed to optimize electrolyte with the focus on engineering aspects. The basic physicochemical properties including ionic conductivity, viscosity,wettability and thermochemical stability of the electrolytes using Na PF6 as the solute and the mixed solvent with different components of EMC,DMC or DEC in PC or EC were systematically measured. Ah pouch cell with NaNi_(1/3)Fe_(1/3)Mn_(1/3)O_(2)/hard carbon electrodes was used to evaluate the performance of the prepared electrolytes. By using the Inductive Coupled Plasma Emission Spectrometer(ICP), X-ray photoelectron spectroscopy(XPS), Thermogravimetric-differential scanning calorimetry(TG-DSC) and Accelerating Rate Calorimeter(ARC), we show that an optimized electrolyte can effectively promote the formation of a protective interfacial layer on two electrodes, which not only retards parasitic reactions between the electrodes and electrolyte but also suppresses dissolution of metal ions from the cathode. With an optimized electrolyte, a NaNi_(1/3)Fe_(1/3)Mn_(1/3)O_(2)/hard carbon cell can attain 56.16% capacity retention under the low temperature of -40℃, and can be able to retain 80%capacity retention after more than 2500 cycles while presenting excellent thermal safety.

Unraveling the stabilization mechanism of solid electrolyte interface on ZnSe by rGO in sodium ion battery

Transition metal selenides have been widely studied as anode materials of sodium ion batteries(SIBs),however,the investigation of solid-electrolyte-interface(SEI)on these materials,which is critical to the electrochemical performance of SIBs,remains at its infancy.Here in this paper,ZnSe@C nanoparticles were prepared from ZIF-8 and the SEI layers on these electrodes with and without reduced graphene oxide(rGO)layers were examined in details by X-ray photoelectron spectroscopies at varied charged/discharged states.It is observed that fast and complicated electrolyte decomposition reactions on ZnSe@C leads to quite thick SEI film and intercalation of solvated sodium ions through such thick SEI film results in slow ion diffusion kinetics and unstable electrode structure.However,the presence of rGO could efficiently suppress the decomposition of electrolyte,thus thin and stable SEI film was formed.ZnSe@C electrodes wrapped by rGO demonstrates enhanced interfacial charge transfer kinetics and high electrochemical performance,a capacity retention of 96.4%,after 1000 cycles at 5 A/g.This study might offer a simple avenue for the designing high performance anode materials through manipulation of SEI film.

Synthesis and Conductivity Characterization of Anti-Perovskite Na3OX Solid Electrolytes for All Solid Na-Ion Batteries

Solid electrolytes for all solid sodium-ion batteries have been attracting much attention as an alternative energy storage system, which have the advantage of being extremely safe because it can be charged quickly and is nonflammable. We have synthesized anti-perovskite type Na3OX (X = Br, and I) electrolytes with high purity, by reactions of halogen mixtures with sodium oxides. After mixing, it was filled in an alumina crucible and heated for 6 hours at 330°C. It was confirmed that a large crystal strain was introduced by eutectication, which might reduce the activation energy of Na ion conduction and lead to an improvement of the conductivity. A relatively higher ionic conductivity of σ = 1.55 × 10-7 S/cm at 60°C has been obtained for Na3OBr0.6I0.4, which is about three orders higher than that in literature. A different ratio of X (X = Br, I) ions was added into sodium oxide to make the Na3OX crystal. The influence of strain introduction on optimizing the bottleneck and improving the conductivity was discussed.

The safety aspect of sodium ion batteries for practical applications

Sodium-ion batteries(SIBs)with advantages of abundant resource and low cost have emerged as promising candidates for the next-generation energy storage systems.However,safety issues existing in electrolytes,anodes,and cathodes bring about frequent accidents regarding battery fires and explosions and impede the development of high-performance SIBs.Therefore,safety analysis and high-safety battery design have become prerequisites for the development of advanced energy storage systems.The reported reviews that only focus on a specific issue are difficult to provide overall guidance for building high-safety SIBs.To overcome the limitation,this review summarizes the recent research progress from the perspective of key components of SIBs for the first time and evaluates the characteristics of various improvement strategies.By orderly analyzing the root causes of safety problems associated with different components in SIBs(including electrolytes,anodes,and cathodes),corresponding improvement strategies for each component were discussed systematically.In addition,some noteworthy points and perspectives including the chain reaction between security issues and the selection of improvement strategies tailored to different needs have also been proposed.In brief,this review is designed to deepen our understanding of the SIBs safety issues and provide guidance and assistance for designing high-safety SIBs.

A Molecular-Sieving Interphase Towards Low-Concentrated Aqueous Sodium-Ion Batteries

Aqueous sodium-ion batteries are known for poor rechargeability because of the competitive water decomposition reactions and the high electrode solubility.Improvements have been reported by saltconcentrated and organic-hybridized electrolyte designs,however,at the expense of cost and safety.Here,we report the prolonged cycling of ASIBs in routine dilute electrolytes by employing artificial electrode coatings consisting of NaX zeolite and NaOH-neutralized perfluorinated sulfonic polymer.The as-formed composite interphase exhibits a molecularsieving effect jointly played by zeolite channels and size-shrunken ionic domains in the polymer matrix,which enables high rejection of hydrated Na^(+)ions while allowing fast dehydrated Na^(+)permeance.Applying this coating to electrode surfaces expands the electrochemical window of a practically feasible 2 mol kg^(-1) sodium trifluoromethanesulfonate aqueous electrolyte to 2.70 V and affords Na_(2)MnFe(CN)_(6)//NaTi_(2)(PO_(4))_(3) full cells with an unprecedented cycling stability of 94.9%capacity retention after 200 cycles at 1 C.Combined with emerging electrolyte modifications,this molecular-sieving interphase brings amplified benefits in long-term operation of ASIBs.

Anthraquinone derivative as high-performance anode material for sodium-ion batteries using ether-based electrolytes

Organic materials, especially the carbonyl compounds, are promising anode materials for room temperature sodium-ion batteries owing to their high reversible capacity, structural diversity as well as eco-friendly synthesis from bio-mass. Herein, we report a novel anthraquinone derivative, C_(14)H_6 O_4 Na_2 composited with carbon nanotube(C_(14)H_6 O_4 Na_2-CNT), used as an anode material for sodium-ion batteries in etherbased electrolyte. The C_(14)H_6 O_4 Na_2-CNT electrode delivers a reversible capacity of 173 mAh g^(-1) and an ultra-high initial Coulombic efficiency of 98% at the rate of 0.1 C. The capacity retention is 82% after 50 cycles at 0.2 C and a good rate capability is displayed at 2 C.Furthermore, the average Na insertion voltage of 1.27 V vs. Na^+/Na makes it a unique and safety battery material, which would avoid Na plating and formation of solid electrolyte interface. Our contribution provides new insights for designing developed organic anode materials with high initial Coulombic efficiency and improved safety capability for sodium-ion batteries.

Experimental and computational optimization of Prussian blue analogues as high-performance cathodes for sodium-ion batteries:A review

In this review,we discuss the electrochemical properties of Prussian blue(PB)for Na^(+)storage by combining structural engineering and electrolyte modifications.We integrated experimental data and density functional theory(DFT)in sodium-ion battery(SIB)research to refine the atomic arrangements and crystal lattices and introduce substitutions and dopants.These changes affect the lattice stability,intercalation,electronic and ionic conductivities,and electrochemical performance.We unraveled the intricate structure-electrochemical behavior relationship by combining experimental data with computational models,including first-principles calculations.This holistic approach identified techniques for optimizing PB and Prussian blue analog(PBA)structu ral properties for SIBs.We also discuss the tuning of electrolytes by systematically adjusting their composition,concentration,and additives using a combination of molecular dynamics(MD)simulations and DFT computations.Our review offers a comprehensive assessment of strategies for enhancing the electrochemical properties of PB and PBAs through structural engineering and electrolyte modifications,combining experimental insights with advanced computational simulations,and paving the way for next-generation energy storage systems.