Analysis of OECD/NEA medium 1000 MWth sodium-cooled fast reactor using the Monte Carlo serpent code and ENDF/B-VIII.0 nuclear data library

This study presents a benchmark evaluation of the new ENDF/B-VIII.0 nuclear data library for the Organization for Economic Co-operation and Development/Nuclear Energy Agency Medium 1000 MWth sodium-cooled fast reactor(SFR).The study presented herein covers both SFR core types,i.e.,metallic fueled(MET-1000)and oxide fueled(MOX-1000),simulated using the continuous-energy Monte Carlo Serpent2 code.The neutronics performances of the ENDF/B-VIII.0-based simulations were compared mainly to two libraries:ENDF/B-VII.1 and JENDL-4.0.The comparison includes several neutronics parameters evaluated for the beginning and end of the cycle conditions.These parameters include the effective multiplication factor keff,total effective delayed neutron fraction beff,sodium void reactivity(DqNa),Doppler constant(DqDoppler),and control rod worth(DqCR).In addition,a sensitivity study was used to reveal the major isotope/reaction pairs contributing to the discrepancy observed in the performance of the three libraries using 33 and 44-energy-group structures.

Materials R & D for sodium-cooled fast reactor in China

The study gives a brief introduction on development of innovated nuclear system in China,mainly focus on the materials R&D status for the sodium cooled fast reactor.With the high speed development of economy,China needs a huge energy supply;at same time a more cleaning energy to reduce the carbon release is demanded.The nuclear energy is the most cleaning energy at present time,especially the innovated nuclear system which is so-called GenerationⅣpower plants has got its prior development due to its safety, economical and little fission production produced.Fast breeder reactor,as the priority development reactor type in the Gen-Ⅳnuclear system,is the key to the advanced closed fuel cycle technologies.China experimental fast reactor(CEFR ) has been completed the design,construction the synthesis system commissioning and reached its physical criticality on July 21,2010.At China Institute of Atomic Energy,the CEFR and other research facilities have been established,and extensive studies are planning to carry out in the areas of fuel and materials development.This will laid the foundation for the design and development of the future's CFR—900(China Demonstration Fast Reactor) and CCFR(China Commercial Fast Reactor). Highlights of some of materials R&D studies are discussed in this paper.

Numerical Analysis of Self-wastage Phenomena Caused by Sodium-Water Reaction in Sodium-Cooled Fast Reactor throuah Simulant Experiment

A water leakage on the surface of heat transfer tube in a steam generator of sodium-cooled fast reactor causes SWR （sodium-water reaction）. The SWR damages the leak surface and gives rise to the leak enlargement. Most of initial leakage starts from micro leak （less than 0.5 g/s）. However, the leak rate increases more than two orders of magnitude and the resultant leak damages surrounding heat transfer tubes and it brings secondary failure of the heat transfer tube. Evaluation of the leak enlargement is necessary to assess the leak rate increase, so that evaluate the possibility of secondary failure. In this study, a simulant experiment, which uses neutralization reaction, is proposed to reproduce the leak enlargement. To examine the feasibility of the experiment, numerical simulations are carried out. From the result, a funnel-shaped nozzle enlargement is observed and the shape similar to the shape of the enlarged nozzle from the SWAT （sodium-water reaction test loop） experiment.

Development of an Evaluation Methodology for Fuel Discharge in Core Disruptive Accidents of Sodium-Cooled Fast Reactors

The purpose of the present study is to develop a methodology to evaluate fuel discharge through the CRGT （control-rod guide tube） during CDAs （core-disruptive accidents） of SFRs （sodium-cooled fast reactors）, since fuel discharge will decrease the core reactivity and CRGTs have a potential to provide an effective discharge path. Fuel discharge contains multi-component fluid dynamics with phase changes, and, in the present study, the SFR safety analysis code SIMMER （Sn, implicit, multifield, multicomponent, Eulerian recriticality） was utilized as a technical basis. First, dominant phenomena affecting fuel discharge through the CRGT are identified based on parametric calculations by the SIMMER code. Next, validations on the code models closely relating to these phenomena were carried out based on experimental data. It was shown that the SIMMER code with some model modifications could reproduce the experimental results appropriately. Through the present study, the evaluation methodology for the molten-fuel discharge through the CRGT was successfully developed.

Review of safety improvement on sodium-cooled fast reactors after Fukushima accident

Several countries are developing and deploying SFRs even after the accident at Tokyo Electric Power Company’s Fukushima Dai-Ichi Nuclear Power Station. However, the Fukushima accident prompted all countries to redefine the fast reactor programs. The drastic safety enhancement is the most important issue to be established. In light of this situation, key essence of the safety improvement is reviewed in this paper by referring the achievements of the recent International Workshop on Prevention and Mitigation of Severe Accidents in SFRs which was held by Japan Atomic Energy Agency (JAEA) in cooperation with the International Atomic Energy Agency (IAEA) in June, 2012 and the findings published in the past journals including those of the International Conference on Fast Reactor and Related Fuel Cycles (FR09) held by IAEA in December, 2009.

Development of multi-group Monte-Carlo transport and depletion coupling calculation method and verification with metal-fueled fast reactor

The accurate modeling of depletion,intricately tied to the solution of the neutron transport equation,is crucial for the design,analysis,and licensing of nuclear reactors and their fuel cycles.This paper introduces a novel multi-group Monte-Carlo depletion calculation approach.Multi-group cross-sections(MGXS)are derived from both 3D whole-core model and 2D fuel subassembly model using the continuous-energy Monte-Carlo method.Core calculations employ the multi-group Monte-Carlo method,accommodating both homogeneous and specific local heterogeneous geometries.The proposed method has been validated against the MET-1000 metal-fueled fast reactors,using both the OECD/NEA benchmark and a new refueling benchmark introduced in this paper.Our findings suggest that microscopic MGXS,produced via the Monte-Carlo method,are viable for fast reactor depletion analyses.Furthermore,the locally heterogeneous model with angular-dependent MGXS offers robust predictions for core reactivity,control rod value,sodium void value,Doppler constants,power distribution,and concentration levels.

Effect of reprocessing on neutrons of a molten chloride salt fast reactor

Due to their unique features,such as the inherent safety,simplified fuel cycle,and continuous on-line reprocessing,molten salt reactors(MSRs)are regarded as one of the six reference reactors in the Generation IV International Forum(GEN-IV).Molten chloride salt fast reactors(MCFRs)are a type of MSR.Compared to molten fluoride salt reactors(MFSRs),MCFRs have a higher solubility of heavy metal atoms,a harder neutron spectrum,lower accumulation of fission products(FPs),and better breeding and transmutation performance.Thus,MCFRs have been recognized as a type of MSR with great prospects for future development.However,as the most important feature for MSRs,the effect of different reprocessing modes on MCFRs must be researched in depth.As such,this study investigated the effect of different isotopes,especially FPs,on the neutronic performance of an MCFR,such as its breeding performance.Furthermore,the characteristics of the different reprocessing modes and MCFR rates were analyzed in terms of safety,radioactivity level,neutron economy,and breeding capacity.In the end,a reprocessing method suitable for MCFRs was determined through calculation and analysis,which provides a reference for the further research of MCFRs.

Experimental study on the mechanism of flow blockage formation in fast reactor

Various sources of solid particles might exist in the coolant flow of a liquid metal cooled fast reactor(e.g.,through chemical interaction between the coolant and impurities,air,or water,through corrosion of structural materials,or from damaged/molten fuel).Such particles may cause flow blockage accidents in a fuel assembly,resulting in a reduction in coolant flow,which potentially causes a local temperature rise in the fuel cladding,cladding failure,and fuel melt.To understand the blockage formation mechanism,in this study,a series of simulated experiments was conducted by releasing different solid particles from a release device into a reducer pipe using gravity.Through detailed analyses,the influence of various experimental parameters(e.g.,particle diameter,capacity,shape,and static friction coefficient,and the diameter and height of the particle release nozzle)on the blockage characteristics(i.e.,blockage probability and position)was examined.Under the current range of experimental conditions,the blockage was significantly influenced by the aforementioned parameters.The ratio between the particle diameter and outlet size of the reducer pipe might be one of the determining factors governing the occurrence of blockage.Specifically,increasing the ratio enhanced blockage(i.e.,larger probability and higher position within the reducer pipe).Increasing the particle size,particle capacity,particle static friction coefficient,and particle release nozzle diameter led to a rise in the blockage probability;however,increasing the particle release nozzle height had a downward influence on the blockage probability.Finally,blockage was more likely to occur in non-spherical particles case than that of spherical particles.This study provides a large experimental database to promote an understanding of the flow blockage mechanism and improve the validation process of fast reactor safety analysis codes.

Effect of 37Cl enrichment on neutrons in a molten chloride salt fast reactor

A molten chloride salt fast reactor(MCFR)is well suited to fuel breeding and the transmutation of transuranium(TRU)elements owing to its advantageous features of fast neutron spectrum and high TRU solubility.However,the neutron absorption cross section of 35Cl is approximately 1000 times greater than for 37Cl,which has a significant impact on the neutron physical characteristics of a MCFR.Based on an automatic online refueling and reprocessing procedure,the influences of 37Cl enrichment on neutron economy,breeding performance,and the production of harmful nuclides were analyzed.Results show that 37Cl enrichment strongly influences the neutron properties of a MCFR.With natural chlorine,233U breeding cannot be achieved and the yields of S and 36Cl are very high.Increasing the 37Cl enrichment to 97%brings a clear improvement in its neutronics property,making it almost equal to that corresponding to 100%enrichment.Moreover,when 37Cl is enriched to 99%,its neutronics parameters are almost the same as for 100%enrichment.Considering the enrichment cost and the neutron properties,a 37Cl enrichment of 97%is recommended.Achieving an optimal neutronics performance requires 99%37Cl enrichment.

Startup scheme optimization and flow instability of natural circulation lead-cooled fast reactor SNCLFR-100

Owing to the inherent instability of the natural circulation system,flow instability can easily occur during the operation of a natural circulation lead-cooled fast reactor,especially during the startup phase.A comprehensive startup scheme for SNCLFR-100,including primary and secondary circuits,is proposed in this paper.It references existing more mature startup schemes in various reactor types.It additionally considers the restriction conditions on the power increase in other schemes and the characteristics of lead-based coolant.On this basis,the multi-scale coupling code ATHLET-OpenFOAM was used to study the flow instability in the startup phase under different power-step amplitudes and power duration times.The results showed that obvious flow instability phenomena were found in the different startup schemes,such as the short-term backflow phenomenon of the core at the initial time of the startup.Moreover,an obvious increase in the flow rate and temperature to the peak value at the later stage of a continuous power rise was observed,as well as continuous oscillations before reaching a steady state.It was determined that the scheme with smaller power-step amplitude and a longer power duration time requires more time to start the reactor.Nevertheless,it will be more conducive to the safe and stable startup of the reactor.

Core and blanket thermal-hydraulic analysis of a molten salt fast reactor based on coupling of OpenMC and OpenFOAM

In the core of a molten salt fast reactor(MSFR),heavy metal fuel and fission products can be dissolved in a molten fluoride salt to form a eutectic mixture that acts as both fuel and coolant.Fission energy is released from the fuel salt and transferred to the second loop by fuel salt circulation.Therefore,the MSFR is characterized by strong interaction between the neutronics and the thermal hydraulics.Moreover,recirculation flow occurs,and nuclear heat is accumulated near the fertile blanket,which significantly affects both the flow and the temperature fields in the core.In this work,to further optimize the conceptual geometric design of the MSFR,three geometries of the core and fertile blanket are proposed,and the thermal-hydraulic characteristics,including the three-dimensional flow and temperature fields of the fuel and fertile salts,are simulated and analyzed using a coupling scheme between the open source codes OpenMC and OpenFOAM.The numerical results indicate that a flatter core temperature distribution can be obtained and the hot spot and flow stagnation zones that appear in the upper and lower parts of the core center near the reflector can be eliminated by curving both the top and bottom walls of the core.Moreover,eight cooling loops with a total flow rate of0.0555 m3 s-1 ensur an acceptable temperature distribusure an acceptable temperature distribution in the fertile blanket.

Neutronics physics analysis of a large fluoride-salt-cooled solidfuel fast reactor with Th-based fuel

Fast reactors based on thorium fuel have enhanced inherent safety. Fluoride salt performs well as a coolant in high-temperature nuclear systems. In this paper,we present a reference core for a large fluoride-salt-cooled solid-fuel fast reactor(LSFR) using thorium–uranium fuel cycle. Neutronics physics of the LSFR reference core is investigated with 2D and 3D in-core fuel management strategy. The design parameters analyzed include the fuel volume fraction, power density level and continuous removal of fission products with 3D fuel shuffling that obtains better equilibrium core performance than 2D shuffling. A self-sustained core is achieved for all cases,and the core of 60% fuel volume fraction at 50 MW/m^3 power density is of the best breeding performance(average breeding ratio 1.134). The LSFR core based on thorium fuel is advantageous in its high discharge burn-up of 20–30% fissions per initial heavy metal atom, small reactivity swing over the whole lifetime(to simplify the reactivity control system), the negative reactivity temperature coefficient(intrinsically safe for all cases) and accepted cladding peak radiation damage. The LSFR reactor is a good alternative option for the deployment of a self-sustained thorium-based nuclear system.

Development and application of a multi-physics and multi-scale coupling program for lead-cooled fast reactor

In this study,a multi-physics and multi-scale coupling program,Fluent/KMC-sub/NDK,was developed based on the user-defined functions(UDF)of Fluent,in which the KMC-sub-code is a sub-channel thermal-hydraulic code and the NDK code is a neutron diffusion code.The coupling program framework adopts the"master-slave"mode,in which Fluent is the master program while NDK and KMC-sub are coupled internally and compiled into the dynamic link library(DLL)as slave codes.The domain decomposition method was adopted,in which the reactor core was simulated by NDK and KMC-sub,while the rest of the primary loop was simulated using Fluent.A simulation of the reactor shutdown process of M2LFR-1000 was carried out using the coupling program,and the code-to-code verification was performed with ATHLET,demonstrating a good agreement,with absolute deviation was smaller than 0.2%.The results show an obvious thermal stratification phenomenon during the shutdown process,which occurs 10 s after shutdown,and the change in thermal stratification phenomena is also captured by the coupling program.At the same time,the change in the neutron flux density distribution of the reactor was also obtained.

Th–U cycle performance analysis based on molten chloride salt and molten fluoride salt fast reactors

The recent development of molten salt fast reactors has generated a renewed interest in them. As compared to traditional solid fuel fast neutron systems, it has many unique advantages, e.g., lower fissile inventory,no initial criticality reserve, waste reduction, and a simplified fuel cycle. It has been recognized as an ideal reactor for achieving a closed Th–U cycle. Based on the carrier salt, molten salt fast reactors could be divided into either a molten chloride salt fast reactor(MCFR) or a molten fluoride salt fast reactor(MFFR);to compare their Th–U cycle performance, the neutronic parameters in a breeding and burning(B&B) transition scenario were studied based on similar core geometry and power. The results demonstrated that the required reprocessing rate for an MCFR to achieve self-breeding was lower than that of an MFFR.Moreover, the breeding capability of an MCFR was better than that of an MFFR;at a reprocessing rate of 40 L/day,using LEU and Pu as start-up fissile materials, the doubling time(DT) of an MFFR and MCFR were 88.0 years and 48.0 years, and 16.5 years and 16.2 years, respectively.Besides, an MCFR has lower radio-toxicity due to lower buildup of fission products(FPs) and transuranium(TRU),while an MFFR has a larger, delayed neutron fraction with smaller changes during the entire operation.

Development of a three dimension multi-physics code for molten salt fast reactor

Molten Salt Reactor(MSR) was selected as one of the six innovative nuclear reactors by the Generation IV International Forum(GIF).The circulating-fuel in the can-type molten salt fast reactor makes the neutronics and thermo-hydraulics of the reactor strongly coupled and different from that of traditional solid-fuel reactors.In the present paper,a new coupling model is presented that physically describes the inherent relations between the neutron flux,the delayed neutron precursor,the heat transfer and the turbulent flow.Based on the model,integrating nuclear data processing,CAD modeling,structured and unstructured mesh technology,data analysis and visualization application,a three dimension steady state simulation code system(MSR3DS) for the can-type molten salt fast reactor is developed and validated.In order to demonstrate the ability of the code,the three dimension distributions of the velocity,the neutron flux,the delayed neutron precursor and the temperature were obtained for the simplified MOlten Salt Advanced Reactor Transmuter(MOSART) using this code.The results indicate that the MSR3DS code can provide a feasible description of multi-physical coupling phenomena in can-type molten salt fast reactor.Furthermore,the code can well predict the flow effect of fuel salt and the transport effect of the turbulent diffusion.

Lead-Bismuth and Lead as Coolants for Fast Reactors

Fast reactors used lead-bismuth eutectic (LBE) and lead as coolants possess very high level of inherent self-protection and passive safety against severe accident. So, population radiophobia can be overcome. That type of reactors can be simultaneously more safely and more cheaply. As all other coolants, LBE and lead coolant (LC) possess the certain virtues and shortcomings. The presented report includes the comparative analysis of characteristic properties of those coolants, their impact on reactor safety, reliability and operating characteristics. The conclusion is made about promising usage of FRs with these coolants in future NP after the experience in operating of the prototypes of such reactors has been obtained.

Development of a displacement-reactivity feedback model for dynamic behavior simulation in fast burst reactor

In this study, a displacement-reactivity feedback model, which can directly represent the inherent ‘‘thermal expansion extinction effect'' of fast burst reactors(FBRs),was developed with the aid of the static neutron transport component of the FBR-MPC code. Dynamic behaviors of bursts in the Godiva I reactor were simulated by coupling the simplified multiphysics models consisting of the point kinetic equations for neutronics, adiabatic equation for temperature, and thermoelastic equations for displacement/stress with the developed model. The results were compared with the corresponding experimental data and those obtained using the traditional fission yield(temperature rise)-reactivity feedback models. It was found that the developed model can provide good results for the bursts with no or a small inertia effect. For the bursts with a prominent inertia effect, the smaller burst width and asymmetric distribution of the fission rate curve, noticed in the experiments but not evident using the traditional models, can be reproduced. In addition, the realistic oscillations in reactivity and fission rate caused by the core vibration, as well as the deeper sub-prompt criticality in the plateau following the burst, can be observed. Therefore, the developed displacement-reactivity feedback model can be expected to be an effective tool for calculating the dynamic behaviors of bursts.

Microstructure Analysis for Chemical Interaction between Cesium and SUS316 Steel in Fast Breeder Reactor Application

The objective of this study is to presume cesium corrosion process and its dominant factors in SUS316 steel, a fuel cladding material for fast breeder reactor application, based on both experimental results of cesium corrosion out-pile test and thermodynamic consideration. The cesium corrosion test was performed in simulated environment of high burn-up fuel pin. And main corrosion products in the specimen after the corrosion test were specified by TEM （transition electron microscopy） and SEM （scanning electron microscopy） in order to formulate a hypothesis of the cesium corrosion process. At the end of this study, it was found that the dominant factors of the corrosion process are the amount of cesium on the surface of the specimen, chromium content in the alloy, the supply rate of oxygen and temperature.

Measurement of niobium reaction rate for material surveillance tests in fast reactors

A highly accurate and precise technique for measurement of the 93 Nb(n,n’)93m Nb reaction rate was established for the material surveillance tests,etc.in fast reactors.The self-absorption effect on the measurement of the characteristic X-rays emitted by 93m Nb was decreased by the dissolution and evaporation to dryness of niobium dosimeter.A highly precise count of the number of 93 Nb atoms was obtained by measuring the niobium solution concentration using inductively coupled plasma mass spectrometry.X-rays of 93m Nb were measured accurately by means of comparing the X-ray intensity of irradiated niobium solution with that of the solution in which stable 93 Nb was added.The difference between both intensities indicates the effect of 182 Ta,which is generated from an impurity tantalum,and the intensity of X-rays from 93m Nb was evaluated.Measurement error of the 93 Nb(n,n’)93m Nb reaction rate was reduced to be less than 4%,which was equivalent to the other reaction rate errors of dosimeters used for Joyo dosimetry.In addition,an advanced technique using Resonance Ionization Mass Spectrometry was proposed for the precise measurement of 93m Nb yield,and 93m Nb will be resonance-ionized selectively by discriminating the hyperfine splitting of the atomic energy levels between 93 Nb and 93m Nb at high resolution.

Development and validation of a new oxide fuel rod performance analysis code for the liquid metal fast reactor

The integrity and reliability of fuel rods under both normal and accidental operating conditions are of great importance for nuclear reactors.In this study,considering various irradiation behaviors,a fuel rod performance analysis code,named KMC-Fueltra,was developed to evaluate the thermal–mechanical performance of oxide fuel rods under both normal and transient conditions in the LMFR.The accuracy and reliability of the KMC-Fueltra were validated by analytical solutions,as well as the results obtained from codes and experiments.The results indicated that KMC-Fueltra can predict the performance of oxide fuel rods under both normal and transient conditions in the LMFR.