Strength softening models of soil and its application in rainfall-induced landslide simulation

In this study, strength softening models are developed for exploring rainfall-induced landslide mechanism based on Mohr Coulomb strength theory with both saturation degree and temporal evolution into consideration. According to the ratio of two time scales available, the model can be classified into three categories, i.e., instant softening model, delay softening model, and coupling softening model. Corresponding evolution functions are specified to represent these kinds of softening processes and then applied to simulate landslide of homogeneous slopes triggered by rainfall, therefrom, useful conclusions can be drawn in the end.

Expansion of spherical cavity of strain-softening materials with different elastic moduli of tension and compression

An expansion theory of spherical cavities in strain-softening materials with different moduli of tension and com-pression was presented. For geomaterials,two controlling parameters were introduced to take into account the different moduli and strain-softening properties. By means of elastic theory with different moduli and stress-softening models,general solutions cal-culating Tresca and Mohr-Coulomb materials' stress and displacement fields of expansion of spherical cavity were derived. The effects caused by different elastic moduli in tensile and compression and strain-softening rates on stress and displacement fields and development of plastic zone of expansion of cavity were analyzed. The results show that the ultimate expansion pressure,stress and displacement fields and development of plastic zone vary with the different elastic moduli and strain-softening prop-erties. If classical elastic theory is adopted and strain-softening properties are neglected,rather large errors may be the result.

Water‑immersion softening mechanism of coal rock mass based on split Hopkinson pressure bar experiment

The coal mining process is afected by various water sources such as groundwater and coal seam water injection.Understanding the dynamic mechanical parameters of water-immersed coal is helpful for coalmine safe production.The impact compression tests were performed on coal with diferent moisture contents by using theϕ50 mm Split Hopkinson Pressure Bar(SHPB)experimental system,and the dynamic characteristics and energy loss laws of water-immersed coal with diferent compositions and water contents were analyzed.Through analysis and discussion,it is found that:(1)When the moisture content of the coal sample is 0%,30%,60%,the stress,strain rate and energy frst increase and then decrease with time.(2)When the moisture content of the coal sample increases from 30%to 60%,the stress“plateau”of the coal sample becomes more obvious,resulting in an increase in the compressive stress stage and a decrease in the expansion stress stage.(3)The increase of moisture content of the coal sample will afect its impact deformation and failure mode.When the moisture content is 60%,the incident rod end and the transmission rod end of the coal sample will have obvious compression failure,and the middle part of the coal sample will also experience expansion and deformation.(4)The coal composition ratio suitable for the coal immersion softening impact experiment is optimized.

The Study of Chamber Rockburst by the CUSP Model of Catastrophe Theory

By means of CUSP model of catastrophe theory. this paper has studied thephysics process of rockburst occured on circular chamber. The present paper has nolonly described the instability process of rockburst more deeply. but also got the crilicaldepth of plastic softening area of chamber that is valuable in the controlling engineering of rockburst. the chamber displacement jump and energy liberation have been derived. the influence of rock parameters on the rockburst has been discussed .

Softening micromechanical constitutive model of stress induced martensite transformation for NiTi single crystal shape memory alloy

Based on the assumption of laminated microstructure, a micromechanical model of stress induced martensite transformation for NiTi shape memory alloys single crystal is proposed. Elasticity anisotropy and different proper-ties for two phases are considered. Martensite volume fraction is chosen as the internal variable that controls the phase transformation quantitatively. An effective macroscopic elasticity matrix based on the different elasticity characteristics of each phase and the martensite volume fraction are obtained with the help of the perfect interfa-cial relationships. A phase transformation driving force is derived to construct the transformation criterion. The model corresponds to a non-convexity free energy function during phase transformation, so softening behavior can be well simulated by the model. A numerical simulation is implemented for the uniaxial loading of NiTi single crystal alloy according to the model, and simulation results are proved by experimental results of polycrystal with strong {111} texture. Superelasticity, Anisotropy, the evolution of microstructure and softening behavior can be well simulated.

THE DAMAGE PROCESS ZONE CHARACTERISTICS AT CRACK TIP IN CONCRETE

This paper presents a comprehensive derivation of fracture process zone size which closely parallels similar work in fracture of metals and anisotropic solid, but is adapted to conrete. Some nonlinear mechanics models of concrete materials will be discussed by using uniaxial stress assumptions. For uniaxial stress assumption, energy model and fracture model will be presented for nonlinear softening models. Finally, we make a comparison with those models.

Theoretical analysis of a new segmented anchoring style in weakly cemented soft surrounding rock

According to the tensile failure of rock bolt in weakly cemented soft rock, this paper presents a new segmented anchoring style in order to weaken the cumulative effect of anchoring force associated with the large deformation. Firstly, a segmented mechanical model was established in which free and anchoring section of rock bolt were respectively arranged in different deformation zones. Then, stress and displacement in elastic non-anchoring zone, elastic anchoring zone, elastic sticking zone, softening sticking zone and broken zone were derived respectively based on neural theory and tri-linear strain softening constitutive model of soft rock. Results show that the anchoring effect can be characterized by a supporting parameter b. With its increase, the peak value of tangential stress gradually moves to the roadway wall, and the radial stress significantly increases, which means the decrease of equivalent plastic zone and improvement of confining effect provided by anchorage body. When b increases to 0.72, the equivalent plastic zone disappears, and stresses tend to be the elastic solutions. In addition, the anchoring effect on the displacement of surrounding rock can be quantified by a normalization factor δ.