Excellent magnetic softness in TbFe/FeCoV multilayers

[Tb4oFe6o（x nm）/Fe49Co49V2（y nm）]N multilayers were prepared by multitarget magnetron sputtering using a rotary turn-table technique in a stop-and-go mode. The mulfilayers were investigated using X-ray diffraction, field emission scan electron microscopy and vibrating sample magnetometry. The result shows that the coercive field drops abruptly with increasing number of bilayers, and it remains generally stable when the number of bilayers is 10 or higher. An excellent magnetic softness with a coercivity of 1.0 mT is obtained for x = 5 and y = 5 after annealing at 250℃. A crystalline state is observed in FeCoV layers before and after annealing by X-ray diffraction.

Understanding Chemical Reactivity in Extended Systems：Exploring Models of Chemical Softness in Carbon Nanotubes

Chemical reactivity towards electron transfer is captured by the Fukui function.However,this is not well defined when the system or its ions have degenerate or pseudo-degenerate ground states.In such a case,the first-order chemical response is not independent of the perturbation and the correct response has to be computed using the mathematical formalism of perturbation theory for degenerate states.Spatialpseudo-degeneracy is ubiquitous in nanostructures with high symmetry and totally extended systems.Given the size of these systems,using degenerate-state perturbation theory is impractical because it requires the calculation of many excited states.Here we present an alternative to compute the chemical response of extended systems using models of local softness in terms of the local density of states.The local softness is approximately equal to the density of states at the Fermi level.However,such approximation leaves out the contribution of inner states.In order to include and weight the contribution of the states around the Fermi level,a model inspired by the long-range behavior of the local softness is presented.Single wall capped carbon nanotubes(SWCCNT) illustrate the limitation of the frontier orbital theory in extended systems.Thus,we have used a C360 SWCCNT to test the proposed model and how it compares with available models based on the local density of states.Interestingly,a simple Hü ckel approximation captures the main features of chemical response of these systems.Our results suggest that density-of-states models of the softness along simple tight binding Hamiltonians could be used to explore the chemical reactivity of more complex system,such a surfaces and nanoparticles.

Metallic Softness Influence on Magic Numbers of Clusters

The metallic softness parameterαr 0 determines the structure of the cluster and governs the rule of magic numbers. Using molecular dynamic method, the stable structures and magic numbers are determined for the clusters consisting of 13 up to 147 atoms in medium range Morse potentials, which is suitable for most of metals. As the number of atoms constituting the cluster increases, the stable structures undergo transition from face-centered (FC) to edge-centered (EC) structures. The magic number take ones of FC series before transition and take ones of EC series after that. The transition point from FC to EC structures depends on the value of softness parameter.

Dependence of Softness on Fabric Surface Quality and Compressibility

The term ＂softness＂ is loosely used to describe the physical as well as sensory attributes of fabric and other textiles, and several psychophysicai evaluation methods as well as its predicting equations exist. However, the information for physiological mechanism of fabric softness is lack. To explain the blomechauical and the potential neurophysiologicai phecnomenon for exploring fabric softness, accompanying to the procedures in manual exploration for softness and the anatomical multllayor structures of human finer, a contact finite dement （FE） model between finger and fabric is made to conduct an active contact analysis. In present FE model, the effect of surface friction index, compression modulus, Poisson＇s ratio of fabric on softness dlscrimination is Investigated. The interests are in the contributlons of these fabric property variables to contact area, Interracial friction shear stress and contact pressure distributions, which arc significant cognitive variables or stimulus parameters in peripheral neural levels. The mechanistic data for fabric specimens indicates that the basis for the perception of softness of flexible and bulk fabric is likely on the spatial variation of pressure on the skin （or, equivalently the skin displacement and its derivatives） resulting from surface friction phenomenon and compression property of fabric. In present model, however, the effect of Poisson＇s ratio on the total force exerted by fingertip is not significant statistically. Therefore, compression modulus of fabric is, not the only underlying physical variable accounting for peripheral neural response, and also the surface friction phenomenon plays an important role in feeltouch softness of fabric, i.e. the compressibility and surface properties of fabric arc the necessary physical variables involved for the haptic rendering of its softness.

Design and passive analysis of a novel softness display device

Simulating the softness property of object is quite a challenge in virtual reality system. A novel softness display system was developed based on the principle of deformable length of elastic element control （DLEEC）. In the system, the equivalent stiffness of the device is adjustable, and is inversely proportional to the third power of the deformable length of elastic beam. PD position control is employed to guarantee the accurate softness display. The softness of the virtual objects in large scale can be felt with the softness display device. Compared with other haptic devices, the device is passive and exert the react force only when the operator ＂actively touch＂ the virtual objects. The stability of the softness display system was analyzed. It was theoretical proved that the system satisfied the criteria of wide impedance range ＂Z-width＂, and the performance was superior to an active system. The experimental results were presented.

Role of substrate softness in stabilizing surface nanobubbles

The contact line pinning and supersaturation theory for the nanobubble stability has attracted extensive concerns from experimental investigators,and some experimenters argue that the contact line pinning is unnecessary.To interpret the experimental observations,we have proposed previously through molecular dynamics simulations that the deformation of soft substrates caused by surface nanobubbles may play an important role in stabilizing surface nanobubbles,while yet no quantitative theory is available for explanation of this mechanism.Here,the detailed mechanism of self-pinning-induced stability of surface nanobubbles is investigated through theoretical analysis.By manipulating substrate softness,we find that the formation of surface nanobubbles may create a deformation ridge nearby their contact lines which leads to the self-pinning effect.Theoretical analysis shows that the formation of nanobubbles on sufficiently rigid substrates or on liquid-liquid interfaces corresponds to a local free energy maximum,while that on the substrates with intermediate softness corresponds to a local minimum.Thus,the substrate softness could regulate the surface nanobubble stability.The critical condition for the self-pinning effect is determined based on contact line depinning,and the effect of gas supersaturation is explored.Finally,the approximate stability range for the surface nanobubbles is also predicted.

Cell softness reveals tumorigenic potential via ITGB8/AKT/glycolysis signaling in a mice model of orthotopic bladder cancer

Background:Bladder cancer,characterized by a high potential of tumor recurrence,has high lifelong monitoring and treatment costs.To date,tumor cells with intrinsic softness have been identified to function as cancer stem cells in several cancer types.Nonetheless,the existence of soft tumor cells in bladder tumors remains elusive.Thus,our study aimed to develop a microbarrier microfluidic chip to efficiently isolate deformable tumor cells from distinct types of bladder cancer cells.Methods:The stiffness of bladder cancer cells was determined by atomic force microscopy(AFM).The modified microfluidic chip was utilized to separate soft cells,and the 3D Matrigel culture system was to maintain the softness of tumor cells.Expression patterns of integrinβ8(ITGB8),protein kinase B(AKT),and mammalian target of rapamycin(mTOR)were determined by Western blotting.Double immunostaining was conducted to examine the interaction between F-actin and tripartite motif containing 59(TRIM59).The stem-cell-like characteristics of soft cells were explored by colony formation assay and in vivo studies upon xenografted tumor models.Results:Using our newly designed microfluidic approach,we identified a small fraction of soft tumor cells in bladder cancer cells.More importantly,the existence of soft tumor cells was confirmed in clinical human bladder cancer specimens,in which the number of soft tumor cells was associated with tumor relapse.Furthermore,we demonstrated that the biomechanical stimuli arising from 3D Matrigel activated the F-actin/ITGB8/TRIM59/AKT/mTOR/glycolysis pathways to enhance the softness and tumorigenic capacity of tumor cells.Simultaneously,we detected a remarkable up-regulation in ITGB8,TRIM59,and phospho-AKT in clinical bladder recurrent tumors compared with their non-recurrent counterparts.Conclusions:The ITGB8/TRIM59/AKT/mTOR/glycolysis axis plays a crucial role in modulating tumor softness and stemness.Meanwhile,the soft tumor cells become more sensitive to chemotherapy after stiffening,that offers new insights for hampering tumor progression and recurrence.

Remarkable plasticity and softness of polymorphic InSe van der Waals crystals

Indium selenide(InSe)crystals are reported to show exceptional plasticity,a new property to twodimensional van der Waals(2D vdW)semiconductors.However,the correlation between plasticity and specific prototypes is unclear,and the understanding of detailed plastic deformation mechanisms is inadequate.Here three prototypes of InSe are predicted to be plastically deformable by calculation,and the plasticity of polymorphic crystals is verified by experiment.Moreover,distinct nanoindentation behaviors are seen on the cleavage and cross-section surfaces.The modulus and hardness of InSe are the lowest ones among a large variety of materials.The plastic deformation is further perceived from chemical interactions during the slip process.Particularly for the cross-layer slip,the initial In-Se bonds break while new In-In and Se-Se bonds are newly formed,maintaining a decent interaction strength.The remarkable plasticity and softness alongside the novel physical properties,endow InSe great promise for application in deformable and flexible electronics.

Study of the Application of PPG-5-CETETH-20 in Personal Care Rinse-off Product

PPG-5-Ceteth-20 is a multifunction raw material.PPG-5-Ceteth-20 has a wide range of application in skin care and hair care products.The purpose of this study was to evaluate the performance of PPG-5-Ceteth-20.The results shown that PPG-5-Ceteth-20 can improve hair combing,softness and smoothing in the hair care product.In additional,it can improve foam stability and compactness,and it doesn’t affect the transparency of the hair care product.

The Soft X-ray Imager(SXI)on the SMILE Mission

The Soft X-ray Imager(SXI)is part of the scientific payload of the Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)mission.SMILE is a joint science mission between the European Space Agency(ESA)and the Chinese Academy of Sciences(CAS)and is due for launch in 2025.SXI is a compact X-ray telescope with a wide field-of-view(FOV)capable of encompassing large portions of Earth’s magnetosphere from the vantage point of the SMILE orbit.SXI is sensitive to the soft X-rays produced by the Solar Wind Charge eXchange(SWCX)process produced when heavy ions of solar wind origin interact with neutral particles in Earth’s exosphere.SWCX provides a mechanism for boundary detection within the magnetosphere,such as the position of Earth’s magnetopause,because the solar wind heavy ions have a very low density in regions of closed magnetic field lines.The sensitivity of the SXI is such that it can potentially track movements of the magnetopause on timescales of a few minutes and the orbit of SMILE will enable such movements to be tracked for segments lasting many hours.SXI is led by the University of Leicester in the United Kingdom(UK)with collaborating organisations on hardware,software and science support within the UK,Europe,China and the United States.

基于知识辅助深度强化学习的巡飞弹组动态突防决策

巡飞弹组(Loitering Munition Group,LMG)突防控制决策是提高巡飞弹群组作战自主性与智能性的关键。针对存在截击拦截器和临机防空火力区的动态环境中弹组突防机动指令在线生成困难的问题,提出一种基于知识辅助强化学习方法的LMG突防控制决策算法。结合领域知识、规则知识改进状态空间和回报函数设计提高算法泛化能力与训练收敛速度。构建基于软动作-评价方法的LMG突防控制决策框架,以提高算法探索效率。利用专家经验和模仿学习方法改善多弹多威胁带来的解空间狭窄、算法初始高效训练经验匮乏的问题。实验结果表明,新算法能够在动态环境中实时生成有效的突防机动指令,相较于对比方法效果更好,验证了算法的有效性。

Tomographic reconstruction of the Earth’s magnetosheath from multiple spacecraft:a theoretical study

Following our earlier work on tomographic reconstruction of the magnetosheath soft X-ray emissions with superposed epoch analysis of many images recorded from a single spacecraft we now explore the instantaneous reconstruction of the magnetosheath and magnetopause using a few images recorded simultaneously from a few spacecraft.This work is motivated by the prospect of possibly having two or three soft X-ray imagers in space in the coming years,and that many phenomena which occur at the magnetopause boundary,such as reconnection events and pressure pulse responses,do not lend themselves as well to superposed epoch analysis.If the reconstruction is successful-which we demonstrate in this paper that it can be-this collection of imagers can be used to reconstruct the magnetosheath and magnetopause from a single image from each spacecraft,allowing for high time resolution reconstructions.In this paper we explore the reconstruction using,two,three,and four spacecraft.We show that the location of the subsolar point of the magnetopause can be determined with just two satellites,and that volume emissions of soft X-rays,and the shape of the boundary,can be reconstructed using three or more satellites.

Hybrid-Vlasov simulation of soft X-ray emissions at the Earth’s dayside magnetospheric boundaries

Solar wind charge exchange produces emissions in the soft X-ray energy range which can enable the study of near-Earth space regions such as the magnetopause,the magnetosheath and the polar cusps by remote sensing techniques.The Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)and Lunar Environment heliospheric X-ray Imager(LEXI)missions aim to obtain soft Xray images of near-Earth space thanks to their Soft X-ray Imager(SXI)instruments.While earlier modeling works have already simulated soft X-ray images as might be obtained by SMILE SXI during its mission,the numerical models used so far are all based on the magnetohydrodynamics description of the space plasma.To investigate the possible signatures of ion-kinetic-scale processes in soft Xray images,we use for the first time a global hybrid-Vlasov simulation of the geospace from the Vlasiator model.The simulation is driven by fast and tenuous solar wind conditions and purely southward interplanetary magnetic field.We first produce global X-ray images of the dayside near-Earth space by placing a virtual imaging satellite at two different locations,providing meridional and equatorial views.We then analyze regional features present in the images and show that they correspond to signatures in soft X-ray emissions of mirrormode wave structures in the magnetosheath and flux transfer events(FTEs)at the magnetopause.Our results suggest that,although the time scales associated with the motion of those transient phenomena will likely be significantly smaller than the integration time of the SMILE and LEXI imagers,mirror-mode structures and FTEs can cumulatively produce detectable signatures in the soft X-ray images.For instance,a local increase by 30%in the proton density at the dayside magnetopause resulting from the transit of multiple FTEs leads to a 12%enhancement in the line-of-sight-and time-integrated soft X-ray emissivity originating from this region.Likewise,a proton density increase by 14%in the magnetosheath associated with mirror-mode structures can result in an enhancement in the soft X-ray signal by 4%.These are likely conservative estimates,given that the solar wind conditions used in the Vlasiator run can be expected to generate weaker soft X-ray emissions than the more common denser solar wind.These results will contribute to the preparatory work for the SMILE and LEXI missions by providing the community with quantitative estimates of the effects of small-scale,transient phenomena occurring on the dayside.

Analytical method for softness abrasive flow field based on discrete phase model

Aiming at the problem of difficult contact finishing for mini structural surface in course of mould manufacturing,a new no-tool precision machining method based on soft abrasive flow machining (SAFM) was proposed. It allocated restrained component near surface machined,constituted restrained abrasive flow passage,and made the surface become a segment of passage wall. It could control turbulence abrasive flow in restrained passage,realize micro cutting for passage wall,and utilize the irregular motion of abrasive flow to eliminate the mono-directional marks on machined surfaces,and the precision could reach the specular level. A two-phase dynamic model of abrasive flow oriented to SAFM combined with discrete phase model (DPM) was established,the law of two-phase flow motion and the related physical parameters was obtained by corresponding numerical simulation method,and the mechanism of precision machining in SAFM was discussed. Simulation results show that the abrasive flow machining process mainly appears as translation of ablating location with the influence by granular pressure,and as the variation of machining efficiency with the influence by near-wall particle velocity. Thus via control of the inlet velocity and its corresponding machining time,it is supposed to work out the machining process according to the machining requirements by using the Preston equation to seek the relationship among velocity,pressure and material removing rate. By tracking near-wall particles,it can be confirmed that the movement of near-wall abrasive particles is similar to stream-wise vortices. The cutting traces on workpiece surfaces assume disorderly arrangement,so the feasibility of the SAFM method can be reaffirmed.

Two methods for separating the magnetospheric solar wind charge exchange soft X-ray emission from the diffuse X-ray background

Solar wind charge exchange(SWCX)is the process of solar wind high-valence ions exchanging charges with neutral components and generating soft X-rays.Recently,detecting the SWCX emission from the magnetosphere is proposed as a new technique to study the magnetosphere using panoramic soft X-ray imaging.To better prepare for the data analysis of upcoming magnetospheric soft X-ray imaging missions,this paper compares the magnetospheric SWCX emission obtained by two methods in an XMM-Newton observation,during which the solar wind changed dramatically.The two methods differ in the data used to fit the diffuse X-ray background(DXB)parameters in spectral analysis.The method adding data from the ROSAT All-Sky Survey(RASS)is called the RASS method.The method using the quiet observation data is called the Quiet method,where quiet observations usually refer to observations made by the same satellite with the same target but under weaker solar wind conditions.Results show that the spectral compositions of magnetospheric SWCX emission obtained by the two methods are very similar,and the changes in intensity over time are highly consistent,although the intensity obtained by the RASS method is about 2.68±0.56 keV cm^(-2)s^(-1)sr^(-1)higher than that obtained by the Quiet method.Since the DXB intensity obtained by the RASS method is about 2.84±0.74 keV cm^(-2)s^(-1)sr^(-1)lower than that obtained by the Quiet method,and the linear correlation coefficient between the difference of SWCX and DXB obtained by the two methods in diffe rent energy band is close to-1,the diffe rences in magnetospheric SWCX can be fully attributed to the diffe rences in the fitted DXB.The difference between the two methods is most significant when the energy is less than 0.7 keV,which is also the main energy band of SWCX emission.In addition,the difference between the two methods is not related to the SWCX intensity and,to some extent,to solar wind conditions,because SWCX intensity typically va ries with the solar wind.In summary,both methods are robust and reliable,and should be considered based on the best available options.

Using restored two-dimensional X-ray images to reconstruct the three-dimensional magnetopause

Astronomical imaging technologies are basic tools for the exploration of the universe,providing basic data for the research of astronomy and space physics.The Soft X-ray Imager(SXI)carried by the Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)aims to capture two-dimensional(2-D)images of the Earth’s magnetosheath by using soft X-ray imaging.However,the observed 2-D images are affected by many noise factors,destroying the contained information,which is not conducive to the subsequent reconstruction of the three-dimensional(3-D)structure of the magnetopause.The analysis of SXI-simulated observation images shows that such damage cannot be evaluated with traditional restoration models.This makes it difficult to establish the mapping relationship between SXIsimulated observation images and target images by using mathematical models.We propose an image restoration algorithm for SXIsimulated observation images that can recover large-scale structure information on the magnetosphere.The idea is to train a patch estimator by selecting noise–clean patch pairs with the same distribution through the Classification–Expectation Maximization algorithm to achieve the restoration estimation of the SXI-simulated observation image,whose mapping relationship with the target image is established by the patch estimator.The Classification–Expectation Maximization algorithm is used to select multiple patch clusters with the same distribution and then train different patch estimators so as to improve the accuracy of the estimator.Experimental results showed that our image restoration algorithm is superior to other classical image restoration algorithms in the SXI-simulated observation image restoration task,according to the peak signal-to-noise ratio and structural similarity.The restoration results of SXI-simulated observation images are used in the tangent fitting approach and the computed tomography approach toward magnetospheric reconstruction techniques,significantly improving the reconstruction results.Hence,the proposed technology may be feasible for processing SXI-simulated observation images.

Estimating the subsolar magnetopause position from soft X-ray images using a low-pass image filter

The Lunar Environment heliospheric X-ray Imager(LEXI)and Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)missions will image the Earth’s dayside magneto pause and cusps in soft X-rays after their respective launches in the near future,to specify glo bal magnetic reconnection modes for varying solar wind conditions.To suppo rt the success of these scientific missions,it is critical to develop techniques that extract the magnetopause locations from the observed soft X-ray images.In this research,we introduce a new geometric equation that calculates the subsolar magnetopause position(RS)from a satellite position,the look direction of the instrument,and the angle at which the X-ray emission is maximized.Two assumptions are used in this method:(1)The look direction where soft X-ray emissions are maximized lies tangent to the magnetopause,and(2)the magnetopause surface near the subsolar point is almost spherical and thus RSis nea rly equal to the radius of the magneto pause curvature.We create synthetic soft X-ray images by using the Open Geospace General Circulation Model(OpenGGCM)global magnetohydrodynamic model,the galactic background,the instrument point spread function,and Poisson noise.We then apply the fast Fourier transform and Gaussian low-pass filte rs to the synthetic images to re move noise and obtain accurate look angles for the soft X-ray pea ks.From the filte red images,we calculate RS and its accuracy for different LEXI locations,look directions,and solar wind densities by using the OpenGGCM subsolar magnetopause location as ground truth.Our method estimates RS with an accuracy of<0.3 RE when the solar wind density exceeds>10 cm-3.The accuracy improves for greater solar wind densities and during southward interplanetary magnetic fields.The method ca ptures the magnetopause motion during southwa rd interplaneta ry magnetic field turnings.Consequently,the technique will enable quantitative analysis of the magnetopause motion and help reveal the dayside reconnection modes for dynamic solar wind conditions.This technique will suppo rt the LEXI and SMILE missions in achieving their scientific o bjectives.

Mechanical properties and acoustic emission characteristics of soft rock with different water contents under dynamic disturbance

Uniaxial compression tests and cyclic loading acoustic emission tests were conducted on 20%,40%,60%,80%,dry and saturated muddy sandstone by using a creep impact loading system to investigate the mechanical properties and acoustic emission characteristics of soft rocks with different water contents under dynamic disturbance.The mechanical properties and acoustic emission characteristics of muddy sandstones at different water contents were analysed.Results of experimental studies show that water is a key factor in the mechanical properties of rocks,softening them,increasing their porosity,reducing their brittleness and increasing their plasticity.Under uniaxial compression,the macroscopic damage characteristics of the muddy sandstone change from mono-bevel shear damage and‘X’type conjugate bevel shear damage to a roadway bottom-drum type damage as the water content increases.Dynamic perturbation has a strengthening effect on the mechanical properties of samples with 60%and less water content,and a weakening effect on samples with 80%and more water content,but the weakening effect is not obvious.Macroscopic damage characteristics of dry samples remain unchanged,water samples from shear damage and tensile–shear composite damage gradually transformed into cleavage damage,until saturation transformation monoclinic shear damage.The evolution of acoustic emission energy and event number is mainly divided into four stages:loading stage(Ⅰ),dynamic loading stage(Ⅱ),yield failure stage(Ⅲ),and post-peak stage(Ⅳ),the acoustic emission characteristics of the stages were different for different water contents.The characteristic value of acoustic emission key point frequency gradually decreases,and the damage degree of the specimen increases,corresponding to low water content—high main frequency—low damage and high water content—low main frequency—high damage.

从中国首台紫外-可见光高光谱卫星仪器反演得到的高空间分辨率臭氧廓线

Understanding the vertical distribution of ozone is crucial when assessing both its horizontal and vertical transport,as well as when analyzing the physical and chemical properties of the atmosphere.One of the most effective ways to obtain high spatial resolution ozone profiles is through satellite observations.The Environmental Trace Gases Monitoring Instrument(EMI)deployed on the Gaofen-5 satellite is the first Chinese ultraviolet-visible hyperspectral spectrometer.However,retrieving ozone profiles using backscattered radiance values measured by the EMI is challenging due to unavailable measurement errors and a low signal-to-noise ratio.The algorithm developed for the Tropospheric Monitoring Instrument did not allow us to retrieve 87%of the EMI pixels.Therefore,we developed an algorithm specific to the characteristics of the EMI.The fitting residuals are smaller than 0.3%in most regions.The retrieved ozone profiles were in good agreement with ozonesonde data,with maximum mean biases of 20%at five latitude bands.By applying EMI averaging kernels to the ozonesonde profiles,the integrated stratospheric column ozone and tropospheric column ozone also showed excellent agreement with ozonesonde data,The lower layers(0-7.5 km)of the EMI ozone profiles reflected the seasonal variation in surface ozone derived from the China National Environmental Monitoring Center(CNEMC).However,the upper layers(9.7-16.7 km)of the ozone profiles show different trends,with the ozone peak occurring at an altitude of 9.7-16.7 km in March,2019.A stratospheric intrusion event in central China from August 11 to 15,2019,is captured using the EMI ozone profiles,potential vorticity data,and relative humidity data.The increase in the CNEMC ozone co ncentration showed that downward transport enhanced surface ozone pollution.

Predicting the friction angle of clays using a multi-layer perceptron neural network enhanced by yeo-johnson transformation and coral reefs optimization

The accurate prediction of the friction angle of clays is crucial for assessing slope stability in engineering applications.This study addresses the importance of estimating the friction angle and presents the development of four soft computing models:YJ-FPA-MLPnet,YJ-CRO-MLPnet,YJ-ACOC-MLPnet,and YJCSA-MLPnet.First of all,the Yeo-Johnson(YJ)transformation technique was used to stabilize the variance of data and make it more suitable for parametric statistical models that assume normality and equal variances.This technique is expected to improve the accuracy of friction angle prediction models.The friction angle prediction models then utilized multi-layer perceptron neural networks(MLPnet)and metaheuristic optimization algorithms to further enhance performance,including flower pollination algorithm(FPA),coral reefs optimization(CRO),ant colony optimization continuous(ACOC),and cuckoo search algorithm(CSA).The prediction models without the YJ technique,i.e.FPA-MLPnet,CRO-MLPnet,ACOC-MLPnet,and CSA-MLPnet,were then compared to those with the YJ technique,i.e.YJ-FPA-MLPnet,YJ-CRO-MLPnet,YJ-ACOC-MLPnet,and YJ-CSA-MLPnet.Among these,the YJ-CRO-MLPnet model demonstrated superior reliability,achieving an accuracy of up to 83%in predicting the friction angle of clay in practical engineering scenarios.This improvement is significant,as it represents an increase from 1.3%to approximately 20%compared to the models that did not utilize the YJ transformation technique.