Dynamic Interaction Analysis of Coupled Axial-Torsional-Lateral Mechanical Vibrations in Rotary Drilling Systems

Maintaining the integrity and longevity of structures is essential in many industries,such as aerospace,nuclear,and petroleum.To achieve the cost-effectiveness of large-scale systems in petroleum drilling,a strong emphasis on structural durability and monitoring is required.This study focuses on the mechanical vibrations that occur in rotary drilling systems,which have a substantial impact on the structural integrity of drilling equipment.The study specifically investigates axial,torsional,and lateral vibrations,which might lead to negative consequences such as bit-bounce,chaotic whirling,and high-frequency stick-slip.These events not only hinder the efficiency of drilling but also lead to exhaustion and harm to the system’s components since they are difficult to be detected and controlled in real time.The study investigates the dynamic interactions of these vibrations,specifically in their high-frequency modes,usingfield data obtained from measurement while drilling.Thefindings have demonstrated the effect of strong coupling between the high-frequency modes of these vibrations on drilling sys-tem performance.The obtained results highlight the importance of considering the interconnected impacts of these vibrations when designing and implementing robust control systems.Therefore,integrating these compo-nents can increase the durability of drill bits and drill strings,as well as improve the ability to monitor and detect damage.Moreover,by exploiting thesefindings,the assessment of structural resilience in rotary drilling systems can be enhanced.Furthermore,the study demonstrates the capacity of structural health monitoring to improve the quality,dependability,and efficiency of rotary drilling systems in the petroleum industry.

Effect of structural characteristics distribution on strength demand and ductility reduction factor of MDOF systems considering soil-structure interaction

It is known that structural stiffness and strength distributions have an important role in the seismic response of buildings. The effect of using different code-specified lateral load patterns on the seismic performance of fixed-base buildings has been investigated by researchers during the past two decades. However, no investigation has yet been carried out for the case of soil-structure systems. In the present study, through intensive parametric analyses of 21,600 linear and nonlinear MDOF systems and considering five different shear strength and stiffness distribution patterns, including three code-specified patterns as well as uniform and concentric patterns subjected to a group of earthquakes recorded on alluvium and soft soils, the effect of structural characteristics distribution on the strength demand and ductility reduction factor of MDOF fixed-base and soil-structure systems are parametrically investigated. The results of this study show that depending on the level of inelasticity, soil flexibility and number of degrees-of-freedoms (DOFs), structural characteristics distribution can significantly affect the strength demand and ductility reduction factor of MDOF systems. It is also found that at high levels of inelasticity, the ductility reduction factor of low-rise MDOF soil-structure systems could be significantly less than that of fixed-base structures and the reduction is less pronounced as the number of stories increases.

Numerical investigation of the effects of soil-structure and granular material-structure interaction on the seismic response of a flat-bottom reinforced concrete silo

In this work,a numerical study of the effects of soil-structure interaction(SSI)and granular material-structure interaction(GSI)on the nonlinear response and seismic capacity of flat-bottomed storage silos is conducted.A series of incremental dynamic analyses(IDA)are performed on a case of large reinforced concrete silo using 10 seismic recordings.The IDA results are given by two average IDA capacity curves,which are represented,as well as the seismic capacity of the studied structure,with and without a consideration of the SSI while accounting for the effect of GSI.These curves are used to quantify and evaluate the damage of the studied silo by utilizing two damage indices,one based on dissipated energy and the other on displacement and dissipated energy.The cumulative energy dissipation curves obtained by the average IDA capacity curves with and without SSI are presented as a function of the base shear,and these curves allow one to obtain the two critical points and the different limit states of the structure.It is observed that the SSI and GSI significantly influence the seismic response and capacity of the studied structure,particularly at higher levels of PGA.Moreover,the effect of the SSI reduces the damage index of the studied structure by 4%.

A hybrid contact approach for modeling soil-structure interaction using the material point method

The grid-based multi-velocity field technique has become increasingly popular for simulating the Material Point Method(MPM)in contact problems.However,this traditional technique has some shortcomings,such as(1)early contact and contact penetration can occur when the contact conditions are unsuitable,and(2)the method is not available for contact problems involving rigid-nonrigid materials,which can cause numerical instability.This study presents a new hybrid contact approach for the MPM to address these limitations to simulate the soil and structure interactions.The approach combines the advantages of point-point and point-segment contacts to implement contact detection,satisfying the impenetrability condition and smoothing the corner contact problem.The proposed approach is first validated through a disk test on an inclined slope.Then,several typical cases,such as granular collapse,bearing capacity,and deformation of a flexible retaining wall,are simulated to demonstrate the robustness of the proposed approach compared with FEM or analytical solutions.Finally,the proposed method is used to simulate the impact of sand flow on a deformable structure.The results show that the proposed contact approach can well describe the phenomenon of soil-structure interaction problems.

Comparison between seismic analysis of twisting and regular 52-story towers considering soil-structure interaction

A dynamic analysis of both twisting and regular towers is carried out to determine the results of considering soil-structure interaction(SSI)on high-rise buildings.In addition,the difference between the seismic performance of using twisting towers over regular ones is investigated.The twisting tower is a simulation of the Evolution Tower(Moscow).The towers’skeletons consist of RC elements and rest on a reinforced concrete piled-raft foundation.The soil model is considered as multi-layered with the same soil properties as the zone chosen for the analysis(New Mansoura City,Egypt).The only difference between both towers is their shape in elevation.The whole system is modelled and analyzed in a single step as one full 3D model,which is known as the direct approach in SSI.All analyses are carried out using finite-element software(Midas GTS NX).Dynamic output responses due to three records of seismic loads are proposed and presented in some graphs.Based on the results,it is concluded that SSI has a considerable effect on the dynamic response of tall buildings mainly because of the foundation flexibility,as it leads to lengthening the vibration period,increasing the story drift and the base shear for both cases.

Soil-structure interaction of unsymmetrical trench installation culvert

The computation of the design load on culverts in the current Chinese General Code for Design of Highway Bridges and Culverts （CGCDHBC）is primarily based on the linear earth pressure theory, which cannot accurately reflect the changes in vertical loads on trench installation culverts. So the changes in vertical earth pressure and soil arching effect in the backfill for an unsymmetrical trench installation culvert are studied based on a full scale experiment and finite element （FE） simulation. The variation laws of foundation pressure and settlement are also analyzed. Meanwhile, the influence of eccentric load induced by an unsymmetrical trench installation on the interaction of a soil- structure system is discussed. Results show that soil arch is formed when the backfill on the culvert reaches a certain height. It can relieve the earth pressure concentration on the crest of the culvert, but it is instable. The earth pressures obtained by full scale experiment and numerical simulation are greater than those calculated by the current CGCDHBC method. The eccentric load effect on the culvert has a significant influence on the stress states and deformation of the soil-structure system.

Evaluation of Seismic Behavior in Building Tube Structures System with Respect to Dense Soil-Structure Interaction Effect

The perceiving local site effects on strong ground motion are particularly important for the mitigation of earthquake disasters as well as future earthquake resistant design. The primary objective of this study is to investigate seismic behavior of building tube structure system with respect to dense soil-structure interaction (sand dense and very hard clay soil with a thickness greater than 30 m). For this purpose, the studied building in this paper is placed over two other different modeled soil types and results of seismic behavior of building for three soil types are compared with each other. Through response spectrum analyses, influence of different sub-soils (dense and loose soil) was determined on seismic behavior of 40-storey building reinforced concrete (RC) with tube in tube structure system and performance of each model was assessed in terms of shear lag behavior, overall and critical (maximum) story drifts. Results illustrate that loose soils amplify seismic waves and increase building drifts and shear lag behavior.

On the Total Dynamic Response of Soil-Structure Interaction System in Time Domain Using Elastodynamic Infinite Elements with Scaling Modified Bessel Shape Functions

This paper is devoted to a new approach—the dynamic response of Soil-Structure System (SSS), the far field of which is discretized by decay or mapped elastodynamic infinite elements, based on scaling modified Bessel shape functions are to be calculated. These elements are appropriate for Soil-Structure Interaction problems, solved in time or frequency domain and can be treated as a new form of the recently proposed elastodynamic infinite elements with united shape functions (EIEUSF) infinite elements. Here the time domain form of the equations of motion is demonstrated and used in the numerical example. In the paper only the formulation of 2D horizontal type infinite elements (HIE) is used, but by similar techniques 2D vertical (VIE) and 2D corner (CIE) infinite elements can also be added. Continuity along the artificial boundary (the line between finite and infinite elements) is discussed as well and the application of the proposed elastodynamical infinite elements in the Finite element method is explained in brief. A numerical example shows the computational efficiency and accuracy of the proposed infinite elements, based on scaling Bessel shape functions.

Seismic wave input method for three-dimensional soil-structure dynamic interaction analysis based on the substructure of artificial boundaries

The method of inputting the seismic wave determines the accuracy of the simulation of soil-structure dynamic interaction. The wave method is a commonly used approach for seismic wave input, which converts the incident wave into equivalent loads on the cutoff boundaries. The wave method has high precision, but the implementation is complicated, especially for three-dimensional models. By deducing another form of equivalent input seismic loads in the fi nite element model, a new seismic wave input method is proposed. In the new method, by imposing the displacements of the free wave fi eld on the nodes of the substructure composed of elements that contain artifi cial boundaries, the equivalent input seismic loads are obtained through dynamic analysis of the substructure. Subsequently, the equivalent input seismic loads are imposed on the artifi cial boundary nodes to complete the seismic wave input and perform seismic analysis of the soil-structure dynamic interaction model. Compared with the wave method, the new method is simplifi ed by avoiding the complex processes of calculating the equivalent input seismic loads. The validity of the new method is verifi ed by the dynamic analysis numerical examples of the homogeneous and layered half space under vertical and oblique incident seismic waves.

Simplified analysis of frame structures with viscoelastic dampers considering the effect of soil-structure interaction

In this study, simplified numerical models are developed to analyze the soil-structure interaction （SSI） effect on frame structures equipped with viscoelastic dampers （VEDs） based on pile group foundation. First, a single degree-of- freedom （SDOF） oscillator is successfully utilized to replace the SDOF energy dissipated structure considering the SSI effect. The equivalent period and damping ratio of the system are obtained through analogical analysis using the frequency transfer function with adoption of the modal strain energy （MSE） technique. Aparametric analysis is carried out to study the SSI effect on the performance of VEDs. Then the equilibrium equations of the multi degree-of-freedom （MDOF） structure with VEDs considering SSI effect are established in the frequency domain. Based on the assumption that the superstructure of the coupled system possesses the classical normal mode, the MDOF superstructure is decoupled to a set of individual SDOF systems resting on a rigid foundation with adoption of the MSE technique through formula derivation. Numerical results demonstrate that the proposed methods have the advantage of reducing computational cost, however, retaining the satisfactory accuracy. The numerical method proposed herein can provide a fast evaluation of the efficiency of VEDs considering the SSI effect.

Simplified approach for design of raft foundations against fault rupture.Part II:soil-structure interaction

This is the second paper of two, which describe the results of an integrated research effort to develop a four-step simplified approach for design of raft foundations against dip-slip （normal and thrust） fault rupture. The first two steps dealing with fault rupture propagation in the free-field were presented in the companion paper. This paper develops an approximate analytical method to analyze soil-foundation-structure interaction （SFSI）, involving two additional phenomena： （i） fault rupture diversion （Step 3）; and （ii） modification of the vertical displacement profile （Step 4）. For the first phenomenon （Step 3）, an approximate energy-based approach is developed to estimate the diversion of a fault rupture due to presence of a raft foundation. The normalized critical load for complete diversion is shown to be a function of soil strength, coefficient of earth pressure at rest, bedrock depth, and the horizontal position of the foundation relative to the outcropping fault rupture. For the second phenomenon （Step 4）, a heuristic approach is proposed, which ＂scans＂ through possible equilibrium positions to detect the one that best satisfies force and moment equilibrium. Thus, we account for the strong geometric nonlinearities that govern this interaction, such as uplifting and second order （P-△） effects. Comparisons with centrifuge-validated finite element analyses demonstrate the efficacy of the method. Its simplicity makes possible its utilization for preliminary design.

On the use of 1g physical models for ground movements and soil-structure interaction problems

The paper focusses on the use of physical modelling in ground movements(induced by underground cavity collapse or mining/tunnelling)and associated soil-structure interaction issues.The paper presents first an overview of using 1 g physical models to solve geotechnical problems and soil-structure interactions related to vertical ground movements.Then the lg physical modelling application is illustrated to study the development of damage in masonry structure due to subsidence and cavity collapse.A largescale 1 g physical model with a 6 m^3 container and 15 electric jacks is presented with the use of a threedimensional(3D)image correlation technique.The influence of structure position on the subsidence trough is analysed in terms of crack density and damage level.The obtained results can improve the methodology and practice for evaluation of damage in masonry structures.Nevertheless,ideal physical model is difficult to achieve.Thus,future improvement of physical models(analogue materials and instrumentation)could provide new opportunities for using 1 g physical models in geotechnical and soilstructure applications and research projects.

Evaluation of FEMA-440 for including soil-structure interaction

Replacing the entire soil-structure system with a fixed base oscillator to consider the effect of soil-structure interaction （SSI） is a common analysis method in seismic design. This technique has been included in design procedures such as NEHRP, ASCE, etc. by defining an equivalent fundamental period and damping ratio that can modify the response of the structure. However, recent studies indicate that the effects of SSI should be reconsidered when a structure undergoes a nonlinear displacement demand. In recent documents on Nonlinear Static Procedures （NSPs）, FEMA-440 （2005）, a modified damping ratio of the replacement oscillator was proposed by introducing the ductility of the soil-structure system obtained from pushover analysis. In this paper, the damping defined in FEMA-440 to include the soil-structure interaction effect is evaluated, and the accuracy of the Coefficient Method given in FEMA-440 and the Equivalent Linearization Method is studied. Although the improvements for Nonlinear Static Procedures （NSPs） in FEMA-440 are achieved for a fixed base SDOF structure, the soil effects are not perfectly obtained. Furthermore, the damping definition of a soil-structure system is extended to structures to consider bilinear behavior.

Soil-Structure Interaction Analysis of Jack-up Platforms Subjected to Monochrome and Irregular Waves

As jack-up platforms have recently been used in deeper and harsher waters, there has been an increasing demand to understand their behaviour more accurately to develop more sophisticated analysis techniques. One of the areas of significant development has been the modelling of spudean performance, where the load-displacement behaviour of the foundation is required to be included in any numerical model of the structure. In this study, beam on nonlinear winkler foundation （BNWF） modeling--which is based on using nonlinear springs and dampers instead of a continuum soil media--is employed for this purpose. A regular monochrome design wave and an irregular wave representing a design sea state are applied to the platform as lateral loading. By using the BNWF model and assuming a granular soil under spudcans, properties such as soil nonlinear behaviour near the structure, contact phenomena at the interface of soil and spudcan （such as uplifting and rocking）, and geometrical nonlinear behaviour of the structure are studied. Results of this study show that inelastic behaviour of the soil causes an increase in the lateral displacement at the hull elevation and permanent unequal settlement in soil below the spudcans, which are increased by decreasing the friction angle of the sandy soil. In fact, spudeans and the underlying soil cause a relative fixity at the platform support, which changes the dynamic response of the structure compared with the case where the structure is assumed to have a fixed support or pinned support. For simulating this behaviour without explicit modelling of soil-structure interaction （SSI）, moment- rotation curves at the end of platform legs, which are dependent on foundation dimensions and soil characteristics, are obtained. These curves can be used in a simplified model of the platform for considering the relative fixity at the soil- foundation interface.

Efficient seismic analysis for nonlinear soil-structure interaction with a thick soil layer

The direct finite element method is a type commonly used for nonlinear seismic soil-structure interaction(SSI)analysis.This method introduces a truncated boundary referred to as an artificial boundary meant to divide the soil-structure system into finite and infinite domains.An artificial boundary condition is used on a truncated boundary to achieve seismic input and simulate the wave radiation effect of infinite domain.When the soil layer is particularly thick,especially for a three-dimensional problem,the computational efficiency of seismic SSI analysis is very low due to the large size of the finite element model,which contains an whole thick soil layer.In this paper,an accurate and efficient scheme is developed to solve the nonlinear seismic SSI problem regarding thick soil layers.The process consists of nonlinear site response and SSI analysis.The nonlinear site response analysis is still performed for the whole thick soil layer.The artificial boundary at the bottom of the SSI analysis model is subsequently relocated upward from the bottom of the soil layer(bedrock surface)to the location nearest to the structure as possible.Finally,three types of typical sites and underground structures are adopted with seismic SSI analysis to evaluate the accuracy and efficiency of the proposed efficient analysis scheme.

Soil-structure interaction on shallow rigid circular foundation:plane SH waves from far-field earthquakes

A closed-form wave function analytic solution of two-dimensional scattering and diffraction of incident plane SH-waves by a fl exible wall on a rigid shallow circular foundation embedded in an elastic half-space is presented. This research generalizes the previous solution by Trifunac in 1972, which tackled only the semi-circular foundation, to arbitrary shallow circular-arc foundation cases, and is thus comparatively more realistic. Ground surface displacement spectra at higher frequencies are also obtained. As an analytical series solution, the accuracy and error analysis of the numerical results are also discussed. It was observed from the results that the rise-to-span ratio of the foundation profi le, frequency of incident waves, and mass ratios of different media(foundation-structure-soil) are the three primary factors that may affect the surface ground motion amplitudes near the structure.

Isotope Tracking of Surface Water Groundwater Interaction in the Beninese Part of the Iullemeden Aquifer System

The Kandi basin is located in northeast Benin (West Africa). This study is focused on the estimation of water fluxes exchanged between the river Niger (and its tributaries) and the transboundary Iullemeden Aquifer System. In that framework, an innovative approach based on the application of the Bayesian Mixing Model (MixSIAR) analysis on water isotopes (oxygen-18, deuterium and tritium) was performed. Moreover, to assess the relevance of the model outputs, Pearson’s correlation and Principal Component Analysis (PCA) have been done. A complex relationship between surface water and groundwater has been found. Sixty percent (60%) of groundwater samples are made of more than 70% river water and rainwater;while 31.25% of surface water samples are made of about 84% groundwater. To safeguard sustainable water resources for the well-being of the local communities, surface water and groundwater must be managed as a unique component in the Kandi basin.

Out-of-plane (SH) soil-structure interaction： a shear wall with rigid and flexible ring foundation

Soil-structure interaction （SSI） of a building and shear wall above a foundation in an elastic half-space has long been an important research subject for earthquake engineers and strong-motion seismologists. Numerous papers have been published since the early 1970s; however, very few of these papers have analytic closed-form solu- tions available. The soil-structure interaction problem is one of the most classic problems connecting the two dis- ciplines of earthquake engineering and civil engineering. The interaction effect represents the mechanism of energy transfer and dissipation among the elements of the dynamic system, namely the soil subgrade, foundation, and super- structure. This interaction effect is important across many structure, foundation, and subgrade types but is most pro- nounced when a rigid superstructure is founded on a rela- tively soft lower foundation and subgrade. This effect may only be ignored when the subgrade is much harder than a flexible superstructure： for instance a flexible moment frame superstructure founded on a thin compacted soil layer on top of very stiff bedrock below. This paper will study the interaction effect of the subgrade and the super- structure. The analytical solution of the interaction of a shear wall, flexible-rigid foundation, and an elastic half- space is derived for incident SH waves with various angles of incidence. It found that the flexible ring （soft layer） cannot be used as an isolation mechanism to decouple asuperstructure from its substructure resting on a shaking half-space.

Effect of nonlinear soil-structure interaction on seismic response of low-rise SMRF buildings

The nonlinear behavior of a soil-foundation system may alter the seismic response of a structure by providing additional flexibility to the system and dissipating hysteretic energy at the soil-foundation interface. However, the current design practice is still reluctant to consider the nonlinearity of the soil-foundation system, primarily due to lack of reliable modeling techniques. This study is motivated towards evaluating the effect of nonlinear soil-structure interaction （SSI） on the seismic responses of low-rise steel moment resisting frame （SMRF） structures. In order to achieve this, a Winkler- based approach is adopted, where the soil beneath the foundation is assumed to be a system of closely-spaced, independent, nonlinear spring elements. Static pushover analysis and nonlinear dynamic analyses are performed on a 3-story SMRF building and the performance of the structure is evaluated through a variety of force and displacement demand parameters. It is observed that incorporation of nonlinear SSI leads to an increase in story displacement demand and a significant reduction in base moment, base shear and inter-story drift demands, indicating the importance of its consideration towards achieving an economic, yet safe seismic design.

Roles of soil-structure interaction and damping in base-isolated structures built on numerous soil layers overlying a half-space

This study examines the roles of soil-structure interaction （SSI）, higher modes, and damping in a base-isolated structure built on multiple layers of soil overlying a half space. Closed-form solutions for the entire system, including a superstructure, seismic isolator, and numerous soil layers overlying a half-space, were obtained. The formulations obtained in this study simply in terms of well-known frequencies and mechanical impedance ratios can explicitly interpret the dynamic behavior of a base-isolated structure interacting with multiple soil layers overlying a half-space. The key factors influencing the performance of the isolation system are the damping ratio of the isolator and the ratio of the natural frequency of the fixed-base structure to that of the isolated structure by assuming that the superstructure moves as a rigid body. This study reveals that higher damping in the base isolator is unfavorable to higher mode responses that usually dominate the responses of the superstructure and that the damping mechanism plays an important role in transmitting energy in addition to absorbing energy. It is also concluded that it is possible to design a soft soil layer as an isolation system for isolating vibration energy.