This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & sil...This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & silica using simple sol-gel & dip coating methods and studied the best composition of the coatings by altering ratios of titanium tetraisopropoxide (TTIP)/tetraethyl orthosilicate (TEOS) with different homogenizing agents. We characterized the coatings by surface roughness measurement, percentage of optical transmission, static contact angle, near-infrared (NIR) transmission, and diffuse reflectance. The fabrication of coatings on glass substrates played an important role in increasing the water contact angle of about 95° and visible & NIR transmission of about 90%. We compared our modified glass substrate with commercial low emissivity (Low E) glass using X-ray diffraction (XRD) analysis, which showed pure amorphous surface claiming excellent wettability and thus the prepared glass substrate could have a variety of applications in different fields.展开更多
The capability of sol-gel and conventional precipitation techniques for the synthesis of nanocrystalline γ-alumina was investigated. These catalysts were used for vapor-phase dehydration of methanol to dimethyl ether...The capability of sol-gel and conventional precipitation techniques for the synthesis of nanocrystalline γ-alumina was investigated. These catalysts were used for vapor-phase dehydration of methanol to dimethyl ether in a fixed-bed reactor under the same operating conditions （T = 300 ？C, P = 1 bar, LHSV = 2.8, 11.7, 26.1 h？1） and characterized by means of N2 adsorption-desorption, NH3-TPD, XRD, TGA and SEM techniques. According to the experimental results, the catalysts prepared using sol-gel method in non-aqueous medium showed better performance compared with those prepared by other methods.展开更多
Hexagonal barium ferrite BaFe12O19 particles were prepared by sol-gel and coprecipitation methods, respectively. The composition of the so-obtained materials was investigated by means of XRD. By the sol-gel method, no...Hexagonal barium ferrite BaFe12O19 particles were prepared by sol-gel and coprecipitation methods, respectively. The composition of the so-obtained materials was investigated by means of XRD. By the sol-gel method, non-anticipated intermediate crystalline phases, such as γ-Fe2O3, α-Fe2O3, BaCO3, and BaFe2O4 etc., were formed with the delay of the formation of BaFe12O19. The formation of single phase BaFe12O19 required calcination at 850 oC for 4 h. On the other hand, using coprecipitation technique, amorphous hydroxide precursor was directly transferred into BaFe12O19 almost without the formation of intermediate crystalline phases. BaFe12O19 was prepared by calcining at 700 oC for 3 h. The results were confirmed by ESEM and VSM analyses. Based on the already reported results and the observed results in this study, it can be concluded that the coprecipitaion technique is easier to control than the sol-gel method for preparation of BaFe12O19 at a low temperature.展开更多
Zinc oxide nanosized powders with different sizes and morphologies were obtained by the sol-gel method and the precipitation method,respectively.The effects of the sintering temperature on the characteristics of nanos...Zinc oxide nanosized powders with different sizes and morphologies were obtained by the sol-gel method and the precipitation method,respectively.The effects of the sintering temperature on the characteristics of nanosized ZnO powders were discussed.ZnO particles were characterized by XRD and TEM.The results show that the powders prepared by both methods are of hexagon crystalline,and the average diameter of the particles prepared by the sol-gel method is smaller than that by the precipitation method.展开更多
文摘This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & silica using simple sol-gel & dip coating methods and studied the best composition of the coatings by altering ratios of titanium tetraisopropoxide (TTIP)/tetraethyl orthosilicate (TEOS) with different homogenizing agents. We characterized the coatings by surface roughness measurement, percentage of optical transmission, static contact angle, near-infrared (NIR) transmission, and diffuse reflectance. The fabrication of coatings on glass substrates played an important role in increasing the water contact angle of about 95° and visible & NIR transmission of about 90%. We compared our modified glass substrate with commercial low emissivity (Low E) glass using X-ray diffraction (XRD) analysis, which showed pure amorphous surface claiming excellent wettability and thus the prepared glass substrate could have a variety of applications in different fields.
基金supported by Iranian Nanotechnology Initiative Council
文摘The capability of sol-gel and conventional precipitation techniques for the synthesis of nanocrystalline γ-alumina was investigated. These catalysts were used for vapor-phase dehydration of methanol to dimethyl ether in a fixed-bed reactor under the same operating conditions （T = 300 ？C, P = 1 bar, LHSV = 2.8, 11.7, 26.1 h？1） and characterized by means of N2 adsorption-desorption, NH3-TPD, XRD, TGA and SEM techniques. According to the experimental results, the catalysts prepared using sol-gel method in non-aqueous medium showed better performance compared with those prepared by other methods.
基金the Harbin Engineering University Foundation of Talent(No.HEUFT05082) the Postdoctoral Foundation of Heilongjiang Province, China(No.LRB07-231).
文摘Hexagonal barium ferrite BaFe12O19 particles were prepared by sol-gel and coprecipitation methods, respectively. The composition of the so-obtained materials was investigated by means of XRD. By the sol-gel method, non-anticipated intermediate crystalline phases, such as γ-Fe2O3, α-Fe2O3, BaCO3, and BaFe2O4 etc., were formed with the delay of the formation of BaFe12O19. The formation of single phase BaFe12O19 required calcination at 850 oC for 4 h. On the other hand, using coprecipitation technique, amorphous hydroxide precursor was directly transferred into BaFe12O19 almost without the formation of intermediate crystalline phases. BaFe12O19 was prepared by calcining at 700 oC for 3 h. The results were confirmed by ESEM and VSM analyses. Based on the already reported results and the observed results in this study, it can be concluded that the coprecipitaion technique is easier to control than the sol-gel method for preparation of BaFe12O19 at a low temperature.
文摘Zinc oxide nanosized powders with different sizes and morphologies were obtained by the sol-gel method and the precipitation method,respectively.The effects of the sintering temperature on the characteristics of nanosized ZnO powders were discussed.ZnO particles were characterized by XRD and TEM.The results show that the powders prepared by both methods are of hexagon crystalline,and the average diameter of the particles prepared by the sol-gel method is smaller than that by the precipitation method.
