Drying Temperature Effect on Kernel Damage and Viability of Maize Dried in a Solar Biomass Hybrid Dryer

Though several maize varieties have been developed and introduced over the years in Ghana, farmers still face challenges of access to quality seed maize. Among the major constraint is lack of proper drying systems to guarantee quality of seed produced. As in most parts of Africa, drying of maize in the open, on bare ground along shoulders of roads is still a common practice in Ghana. In this study, a 5-tonne capacity hybrid solar biomass dryer was developed for drying maize for seed and food/feed in Ghana. Effect of air temperature in the dryer on the physiological quality and germination of maize kernels was investigated. Maize grains were dried in the open sun simulating farmers practice and using the dryer at 4 varying levels (L1, L2, L3 and L4) with corresponding heights (0.6 m, 1.2 m, 1.8 m and 2.4 m, respectively) from the ground. Harvested maize at 22.8% moisture content was dried at the varying levels until reaching the final desired moisture content of 12.8% ± 0.2% (wb). Results showed that, air temperatures in the dryer increased in accordance with height with lowest mean temperature of 44.4&degC ± 4.6&degC recorded at L1 and mean maximum of 52.8&degC ± 5.4&degC at L4. Drying temperatures recorded at L1 - L3 and ambient had no significant effect (p < 0.05) on kernel damage and viability. Drying conditions at L1-L3 were considered optimum (<50&degC) for kernel drying compared to the topmost tray, L4. Kernel stress crack index (multiple and checked) was therefore reduced on average by 14% while kernel germination increased by 33%. This satisfies the dryer’s potential to be used for commercial drying of maize grains for seed production for smallholder farmers in Ghana.

Study on Drying Edible Soya-bean Oil Using Solar Energy

Soya-bean oil （bean dregs） was dried in a solar energy drying system. Characteristics of the process were measured and the corresponding curves were done. The practicability of this process has been discussed. The results showed that the solar drying system could completely meet technological requirements of drying soy-bean oil, and it was feasible in technology to use the solar drying system to dry the vegetable oil.

Study of the Solar Energy Drying Device and Its Application in Traditional Chinese Medicine in Drying

Background: We referred to nearly 40 years of development and application progress of solar dryer in China literature, especially its application in the field of Chinese herbal medicine drying. Objective: We explored the development direction of China’s development and application of solar dryers, especially focusing on its development and application in traditional Chinese medicine drying. Method: Five types of solar dryers including the greenhouse type solar dryer, the collector type solar dryer, the collector-greenhouse type hybrid solar dryer, the integrated solar dryer and the focusing type solar dryer accounted for the development and application of solar dryers up to 95% in China. The first three types of solar dryers are low temperature dryer (less than or equal to 70°C), while the latter two kinds of solar dryers are high temperature dryer (more than 70°C). In this paper, we respectively introduced and compared the structure, working principle, applications, advantages and disadvantages, and the research status of these five dryer. Results: The integrated solar dryer and the focusing type solar dryer belong to the high temperature dryer types are the future direction of development. Among them, the integrated solar dryer is relatively simple structure and has more promotion prospects. These two kinds of key drying device used in the dryer is the development direction of high efficient vacuum tube. On the other hand, because of their low cost, simple structure and the dry material requirements etc., the three types of low temperature dryers at low temperature for drying materials are also indispensable in the practical application. In contrast, the collector-greenhouse type hybrid solar dryer has more advantages, is the development direction of low temperature drying category. Conclusion: The collector tube which is the key element of the dryer was the core technology of solar dryer. Our country develops more successful of the all-glass vacuum solar thermal collectors and heat pipe-glass vacuum tube. Efficient vacuum tube collector technology is the future developed direction and is equally important to improve the quality of traditional Chinese medicine and dried.

Indirect Solar Drier with Electric Back up System for Quality Hill Products

An indirect solar drier of 25 kg capacity has been developed fitted with solar cell for running the fan. The bulbs are provided in the solar collector for air heating during clouds and evening & morning for faster drying reducing drying time. Various hill crops (Punica granatum L, Ginger, Turmeric and Red chili) have been dried in open sun, oven and solar drier for quality/caparison. The dried products were tested in the post harvest technology laboratory for value addition. The market value of dried products has also been compared.

Drying of Fish Sardines in Oman Using Solar Tunnel Dryers

This paper deals with the design, construction and performance evaluation procedure of a solar tunnel dryer in drying fish. A 12 meter long and 2 meter width half-circled tunnel was designed and constructed to dry about 50-100 kg of freshly harvested fishes per batch. The half of the tunnel base was used as the flat plate air heating solar collector and the remaining half as a dryer. The drying air was forced from the collector region （north side） to the drying region （south side） of the half circled tunnel where the product is to be dried. The drying temperature could be easily raised by some 5-30 ℃ above the ambient temperature inside the tunnel at an air velocity of approximately 0.2 m/sec. The test was conducted with 51.5 kg freshly harvested sardines （hall-load） with initial moisture content of 66.5% （wet-basis） to analyze the performance of the dryer. The fishes were dried to a final average moisture content of 15.5% （wet-basis） within three days （30 hours）. It was possible to reach the moisture content level for safe storage within less than three days （30 hrs） with solar tunnel dryer and 7 days in open air natural sun drying. The improvement in the quality of fishes in terms of color, brightness, flavor, and taste and food value was distinctly recognized.

Development and Optimisation of Drying Parameters for Low-Cost Hybrid Solar Dryer Using Response Surface Method

After harvest and storage problems are major dilemma, which requires to be looked into carefully in developing nation like Nigeria. This paper presents a development of low-cost hybrid solar dryer for food preservation with the objective of setting optimum drying parameters for the preservation of cassava and tomato products. The work was carried out by designing, constructing and finally evaluating the hybrid dryer for effective performance. The optimization of the drying parameters was done using composite technique (Response surface method). The assessment of the dryer shows that 150 Kg cassava mesh and 5000 grams of tomato with 35% and 94% moisture content, respectively were dried to 100 Kg and 334 g with 10% moisture level for 4 hours and 11 hours respectively, for cassava and tomato. The optimization result shows that the dryer will perform optimally with drying temperature of 62°C and 48°C for cassava and tomato respectively with 24% and 91% moisture uptake. Therefore, sustainable techniques for preservation of food are essentially required. Hybrid solar dryer is an alternative to consider in the situation.

Natural Solar Drying and Charcoal Production by Pyrolysis of Empty Shells of Cocoa Pods Using a Carbonisation Stove Fitted with a Chimney

The world’s production of cocoa highly has grown since 1960.In West Africa,the production reached about 3,000,000 tons in 2012.More than 50%of the world’s production of cocoa comes nowadays from Côte d’Ivoire and Ghana and Côte d’Ivoire is the biggest producer.After harvesting,the empty shells,considered as non-useful wastes,are abandoned in the fields where they become a source of pollution.That yields millions of tons of biomass that can be converted into charcoal,instead of being sources of pollution.In the present work,the drying kinetics of the empty wet shells were studied.Then,charcoal production by pyrolysis of those empty shells of cocoa pods was performed,using a carbonisation stove fitted with a chimney.The study showed that the empty shells have a high moisture content.The different phases of the drying were observed.The study compared the drying rates and the diffusion coefficients of a small sample and a big sample.Two experiences of carbonisation of the empty shells were successfully carried out.For the first experiment,the pyrolysis temperatures were recorded and the charcoal mass efficiency calculated.For the second experiment,the temperatures were higher and the result was colored charcoals.The colorations disappeared after some hours.

Experimental Performance and Neural Network Modeling of a Large-scale Greenhouse Solar Dryer for Drying Natural Rubber Sheets

This paper presents experimental performance and artificial neural network modeling of a large-scale greenhouse solar dryer for drying of natural rubber sheets. The dryer consists of a parabolic roof structure covered with polycarbonate sheets on a concrete floor. The dryer is 9.0 m in width, 27.0 m in length and 3.5 m in height. Nine 15-W DC fans powered by three 50-W PV modules were used to ventilate the dryer. To investigate its performance, the dryer was used to dry six batches of natural rubber sheets. For each batch, 750 kg of rubber sheets were dried in the dryer. Results obtained from the experiments showed that drying temperatures varied from 32 ~C to 55 ~C and the use of the dryer led to a considerable reduction of drying time, as compared to the open air sun drying. In addition, the quality of the product from the dryer was high-quality dried products. A multilayer neural network model was developed to predict the performance of this dryer. The predictive power of the model was found to be high after it was adequately trained.

Application of Analytic Hierarchy Process in Selection of an Appropriate Drying Platform for Maize Drying in a Solar Bubble Dryer

The solar bubble dryer (SBD) is a convenient and better option to traditional open sun drying commonly practiced by smallholder farmers in Ghana and other developing countries. However, to operate the SBD, one is faced with the challenge of frequent mixing of grains using a rake to enhance uniform drying and prevent over-heating of the top-layer exposed to the sun. Additionally, condensation in the SBD can compromise the quality of grains during drying under humid conditions. In the present study, the Analytical Hierarchy Process (AHP) was used to select an appropriate drying platform, tarpaulin, or elevated drying rack for maize drying in the SBD. Using the AHP, the elevated drying rack was chosen as a suitable platform for drying maize in the SBD. The SBD with the elevated drying racks was used to dry 270 kg of maize from a moisture content of 18.2% to 12.6% (w.w.b) within 6 hours compared to 11 hours for the same quantity of grains dried on the tarpaulin of the SBD to reach an MC of 12.5% (w.w.b). An average drying rate and moisture extraction rate of 0.93%/h and 2.88 kg/h were achieved with the elevated drying rack system compared to 0.52%/h and 1.60 kg/h when drying on the tarpaulin of the SBD. An average temperature of 44.6°C recorded in the SBD was 9°C more compared to the ambient temperature. The thermal efficiency of the SBD collector was determined as 36.2%. Drying grains with the elevated racks showed advantages of reduced drying time, improved airflow through the drying bed, and prevention of condensation, which occurs when drying on the tarpaulin of the SBD.

Development and Evaluation of an All Weather-Type Solar Drying House to Make for Wood Pellet Material

To suppress the global environment pollutions, we tried to develop a new-type solar drying house by improving a typical agricultural green-house, so that an all weather-type solar drying house was invented ultimately. This house is capable to dry raw wood materials (Ogako) into suitable moisture content (Mc) to make a wood pellet. The all weather-type solar Ogako drying house is covered with a triple transparent film, and an open/close free-type shield sheet is spread along with house’s inner surface with a small space, which is opened when solar radiation is incident on the house in daytime and closed to prevent heat loss from the house while out of sun shining in night. Inside of the all weather-type solar Ogako drying house, there are four belt-conveyors over which four top radiation panels are hanged, and on which four Ogako agitators are touched, a turn-table, two hoppers, four small fans, and besides, a floor heating is molded in concrete floor. Also on the north wall outside the house, two insulated cylinders (chimney) are stood up vertically to exhaust inside moist air passively. Then, to make clearly the operation performance of the house, the drying tests for the proof examination were conducted nineteen times at first test site in Ashoro where is located east-central part of Hokkaido, Japan. As a result of the drying test for the proof examination, it was made clear that the all weather-type solar Ogako drying house is practically useful as a supplementary apparatus to produce the dried Ogako, and consequently to suppress CO2 exhaustion.

The Application of a Mathematical Modelling of Drying Kinetics in the Natural Solar Drying of Banana

In this work, a new mathematical modelling of drying kinetics is described. At first, the modelling of the transfer speed （St） of water was performed. Then St was used as basis to state the drying rate model. The drying rate depends not only on drying time, but also on some modelling parameters which are themselves time-dependent. All the modelling parameters are calculated directly from the experimental drying data. Then the theoretical model of the moisture content was stated. Subsequently, the drying kinetics of natural solar drying of plantain banana was studied as illustration. The drying rate was investigated. The comparison with other models encountered in literatures proved that the current theoretical model was decidedly more accurate. Then the modelling of moisture content of banana was performed and the results were compared with the Henderson and Pabis model. The current theoretical modelling provided by far the best fit.

Feasibility Analysis of Drying Process Habanero Chili Using a Hybrid-Solar-Fluidized Bed Dryer in Yucatan, M^xico

Drying processing of Habanero chili was improved, through solar energy usage. Habanero chili is a notable seasonal product being drying such important for Mexican producers; this process is expensive and wasteful of energy. A feasibility analysis was developed, to determine the market tendency and the optimal drying conditions for redesign Habanero chili drying process, through a hybrid solar-electric energy usage. The new drying process would be held in two stages： （a） an open solar dryer was used; （b） an existing pilot fluidized bed dryer was adapted with a low temperature solar collector for air heating. Habanero chili was dehydrated from 90% to 5% moisture in 10.3 h, with good quality product, available for commercialization. A reduction in the average drying time of 50% was obtained, also, in the energy usage of 77% in the fluidized bed dryer, with an energy saving of 0.52 kg of natural gas per kg of fresh Habanero chili. An innovative sustainable efficient drying process was developed, and will be strategic to expand the market for Habanero chili with low energy cost.

A Comprehensive Review of Design and Technological Advancements across Various Types of Solar Dryers

This analysis investigates the widespread use of solar drying methods and designs in developing countries,particularly for agricultural products like fruits,vegetables,and bee pollen.Traditional techniques like hot air oven drying and open sun drying have drawbacks,including nutrient loss and exposure to harmful particles.Solar and thermal drying are viewed as sustainable solutions because they rely on renewable resources.The article highlights the advantages of solar drying,including waste reduction,increased productivity,and improved pricing.It is also cost-effective and energy-efficient.The review study provides an overview of different solar drying systems and technologies used in poor nations,aiming to identify the most effective and efficient designs.The focus is on comparing current models of solar dryers for optimal performance.The review underscores the importance of solar drying as a long-term,eco-friendly approach to drying food in developing countries.This review aims to evaluate how using solar-powered drying techniques can enhance food preservation,minimize waste,and enhance the quality and marketability of agricultural goods.The paper will specifically focus on examining the efficacy of these methods for drying bee pollen and pinpointing where enhancements can be made in their advancement.

Comparative Study of the Types of Photovoltaic Panels Used in Solar Pumping Systems in Dry Tropical Zones: Case of Adamawa Region in Cameroon

In the dry tropical zone where access to water is increasingly difficult for populations, solar pumping units are increasingly installed to provide water to population. In the local market, there are essentially two types of solar panels, namely monocrystalline and polycrystalline. However, the part of the local market is more dominated by the polycrystalline panel. In this work, comparative studies are carried out in order to characterize the two types of solar panels with regard to local constraints. Tests were carried out over the course of the sun to establish the performance of each type. The panels used have the same electrical characteristics and are connected to loads with same characteristics. Under the set operating conditions, the monocrystalline panel presents more performance than the polycrystalline panel. Although the local market is dominated by the polycrystalline panel, dust deposition tests on the surface of the panels show that the performance of the polycrystalline panel is more affected compared to the performance of the monocrystalline panel.

Performance of a Combined Energy System Consisting of Solar Collector, Biogas Dry Reforming and Solid Oxide Fuel Cell: An Indian Case Study

An energy production system consisting of a solar collector, biogas dry reforming reactor and solid oxide fuel cell (SOFC) was assumed to be installed in Kolkata, India. This study aims to understand the impact of climate conditions on the performance of solar collectors with different lengths of parabolic trough solar collector (dx) and mass flow rate of heat transfer fluid (m). In addition, this study has evaluated the amount of H2 produced by biogas dry reforming (GH2), the amount of power generated by SOFC (PSOFC) and the maximum number of possible households (N) whose electricity demand could be met by the energy system proposed, considering the performance of solar collector with the different dx and m. As a result, the optimum dx was found to be 4 m. This study revealed that the temperature of heat transfer fluid (Tfb) decreased with the increase in m. Tfb in March, April and May was higher than that in other months, while Tfb from June to December was the lowest. GH2, PSOFC and N in March, April and May were higher than those in other months, irrespective of m. The optimum m was 0.030 kg/s.

Sustainability assessment of solar drying systems:a comparative life-cycle analysis of phase-change material-based vs.cylindrical solar dryers

Solar drying systems are becoming a popular alternative to traditional energy-based drying systems for agricultural products due to their effectiveness and reduced fuel consumption.Although the efficiency of solar drying systems has been thoroughly investigated,their sustainability has not been studied enough.This study aims to fill that gap by conducting a life-cycle assessment of two new solar drying systems built in Udaipur,Rajasthan,India.The environmental implications of an innovative cylindrical solar-assisted drying system and a phase-change material-based solar drying system were evaluated using cradle-to-gate life-cycle analysis.The study uses the ReCiPe 2016 endpoints(H)technique to calculate various aspects such as midpoint,endpoint,single score,normalization result,and network diagram for phase-change material-based solar drying and cylindrical solar-assisted drying.Results show that phase-change material-based solar drying has an average of 40%more impact on the environment than cylindrical solar-assisted drying,with a high impact found in human non-carcinogenic toxicity,mainly due to the production of phase-change materials.However,cylindrical solar-assisted drying system crossover phase-change material based solar drying in terms of its impact on human carcinogenic toxicity and fossil resource scarcity.The contribution to global warming of phase-change material-based solar drying is 13.7%more than that of cylindrical solar-assisted drying.The endpoint characterization indicates that phase-change material-based solar drying exceeds in terms of human health(40%)and ecosystem(37.04%),whereas cylindrical solar-assisted drying surpasses phase-change material-based solar drying in terms of impacts on resources,at 14%.The early drying in phase-change material-based solar drying makes up for its higher impact than that in cylindrical solar-assisted drying,which takes 3 hours longer to dry.This study offers guidance and methods for making the best choice of solar-powered dryers.

Self-organization effect in poly(3-hexylthiophene): methanofullerenes solar cells

This paper studies the self-organization of the polymer in solar cells based on poly（3-hexylthiophene）： [6, 6]-phenyl C61-butyric acid methyl ester by controlling the growth rate of active layer. These blend films are characterized by UV-vis absorption spectroscopy, charge-transport dark J - V curve, x-ray diffraction pattern curve, and atomic force microscopy. The results indicate that slowing down the drying process of the wet films leads to an enhanced selforganization, which causes an increased hole transport. Increased incident light absorption, higher carrier mobility, and balanced carrier transport in the active layer explain the enhancement in the device performance, the power conversion efficiency of 3.43% and fill factor up to 64.6% are achieved under Air Mass 1.5, 100 mW/cm^2.

Heat Transfer Optimization in Air Flat Plate Solar Collectors Integrated with Baffles

This paper presents an experimental analysis for comparisons of conventional flat plate solar collectors and collectors integrated with different numbers of baffles. Heat transfer between absorber plate and drying fluid (air) has been one of the major challenges in the design and operations of the indirect solar dryer systems. In this experiment, efficiency of air flat plate solar collector integrated with 2, 3, 4 and 8 baffles was studied and compared with the ordinary collector. The results showed that integrating solar collector with baffles significantly increased the efficiency of the system. It was noted that collector with 2, 3, 4 and 8 baffles had a mean efficiency of 29.2%, 31.3%, 33.1% and 33.7% respectively while with no baffles was 28.9%. The analysis showed that when there were less than four baffles in the collector, heat transfer was dominant over pressure drop and hence high efficiency. However, when the number of baffles exceeded four, the effect associated with an increase in pressure drop highly observed compared to heat transfer coefficient, thus resulted to insignificant increase in efficiency. Therefore, the optimum number of four baffles was commended for the designed model for optimum efficiency.

Photoinduced degradation of organic solar cells with different microstructures

An in situ measurement setup is established to investigate the photoinduced degradation effects in a controllable inert gas ambient environment for the two different microstructures of poly（3-hexylthiophene） （P3HT） and [6,6]-phenyl-C61- butyricacid methyl ester （PCBM） bulk-heterojunction organic solar cells. The two devices are fabricated with the solvent vapor drying process followed by a thermal annealing （vapor drying device） and only a normal thermal annealing process （control device）, respectively. Their power conversion efficiencies （PCEs） and aging features are compared. Their different degradation behaviors in light absorption are confirmed. In addition, irradiation-induced changes in both nanostructure and surface morphology of the P3HT：PCBM blend films treated with two different fabrication processes are observed through scanning electron microscopy and atomic force microscopy. Aggregated bulbs are observed at the surfaces for control devices after light irradiation for 50 h, while the vapor drying devices exhibit smooth film surfaces, and the corresponding device features are not easy to degrade under the aging measurement. Thus the devices having solvent vapor drying and thermal annealing show better device stabilities than those having only the thermal annealing process.

Development and Quality Analysis of a Direct Solar Dryer for Fish

The study investigates drying characteristics of common species of fish in the tropics, catfish (Clarias gariepinus) and tilapia fish (Oreochromis niloticus) using a direct solar dryer. The drying process was carried out during the dry and wet season under natural (0 m/s) and forced convective drying (1.5 m/s, 2.5 m/s, 3.5 m/s fan speed). Results obtained showed that the drying air attained by the dryer was satisfactory and the maximum temperature difference between the dryer and the ambient temperatures was 35°C. The moisture content of the dried samples was 13.97% for catfish and 13.35% for tilapia fish during dry season and during the wet season it was 15.68% for catfish and 14.9% for tilapia fish while for the open sun dried samples it was 21.7% for catfish and 17.0% for tilapia fish. Maximum drying efficiency of 74.3% was recorded for the dryer during dry season and the dried samples at 3.5 m/s fan speed were better in drying rates. The proximate compositions of the fish before and after drying were determined. There was significant difference in proximate composition before and after drying (P < 0.05) and no significant difference in proximate composition at fan speeds considered for both fish species (P < 0.05).