A two-meter parabolic solar concentration dish has been modulated to produce boiled water over 100℃ for various purposes of central heating services. For an effective performance, the system required both continuous ...A two-meter parabolic solar concentration dish has been modulated to produce boiled water over 100℃ for various purposes of central heating services. For an effective performance, the system required both continuous exposure of the dish to sunlight during the day time as well as to an electric control circuit （tracking system）. The amount of the potable water was dependent particularly on the accurate centering of the system which could increase upon preheating. This system has therefore been possible to heat up water at home via increasing the temperature in hot tank by both covering the hot water tank and isolating it from the surroundings using insulators. Applications of a successful parabolic solar concentration has also been designed to provide desalinated water for domestic usage which operates with temperatures higher than other types of the solar radiation for the future.展开更多
In this paper, detailed optical of the solar parabolic dish concentrator is presented. The system has diameter D = 2,800 mm and focal length f = 1,400 mm. The efficient conversion of solar radiation in heat at these t...In this paper, detailed optical of the solar parabolic dish concentrator is presented. The system has diameter D = 2,800 mm and focal length f = 1,400 mm. The efficient conversion of solar radiation in heat at these temperature levels requires a use of concentrating solar collectors. In this paper, detailed optical design of the solar parabolic dish concentrator is presented. The parabolic dish of the solar system consists from 12 curvilinear trapezoidal reflective petals. This paper presents optical simulations of the parabolic solar concentrator unit using the ray-tracing software TracePro. The total flux on receiver and the distribution of irradiance for absorbed flux on center and periphery receiver are given. The total flux at the focal region is 4,031.3 W. The goal of this paper is to present optical design of a low-tech solar concentrator, that can be used as a potentially low-cost tool for laboratory-scale research on the medium-temperature thermal processes, cooling, industrial processes, solar cooking and polygeneration systems, etc.展开更多
文摘A two-meter parabolic solar concentration dish has been modulated to produce boiled water over 100℃ for various purposes of central heating services. For an effective performance, the system required both continuous exposure of the dish to sunlight during the day time as well as to an electric control circuit （tracking system）. The amount of the potable water was dependent particularly on the accurate centering of the system which could increase upon preheating. This system has therefore been possible to heat up water at home via increasing the temperature in hot tank by both covering the hot water tank and isolating it from the surroundings using insulators. Applications of a successful parabolic solar concentration has also been designed to provide desalinated water for domestic usage which operates with temperatures higher than other types of the solar radiation for the future.
文摘In this paper, detailed optical of the solar parabolic dish concentrator is presented. The system has diameter D = 2,800 mm and focal length f = 1,400 mm. The efficient conversion of solar radiation in heat at these temperature levels requires a use of concentrating solar collectors. In this paper, detailed optical design of the solar parabolic dish concentrator is presented. The parabolic dish of the solar system consists from 12 curvilinear trapezoidal reflective petals. This paper presents optical simulations of the parabolic solar concentrator unit using the ray-tracing software TracePro. The total flux on receiver and the distribution of irradiance for absorbed flux on center and periphery receiver are given. The total flux at the focal region is 4,031.3 W. The goal of this paper is to present optical design of a low-tech solar concentrator, that can be used as a potentially low-cost tool for laboratory-scale research on the medium-temperature thermal processes, cooling, industrial processes, solar cooking and polygeneration systems, etc.
