Chlorination strategy on polymer donors toward efficient solar conversions

Bulk heterojunction(BHJ)polymer solar cells(PSCs)are promising candidates for next-generation solar cells.Benefitting from the persistent efforts in material design and synthesis,systematic device engineering and fundamental understanding of the device physics,the power conversion efficiency(PCE)of single PSC has been pushed to surpass 15%,and that of the tandem PSCs is over 17%.Recently,chlorination has drawn much interest and the chlorinated PSCs have been frequently reported in donor-acceptor(D-A)type conjugated polymers.This review summarizes the recent progress of the chlorinated strategy for highly efficient photovoltaic applications.We firstly discuss the chlorination on the acceptor units in D-A type donor polymers,emphasizing the 4 widely used acceptor units with their improved PCE.secondly,the chlorination on the donor units will be discussed,mainly focusing on the chlorination of benzo[1,2-b:4,b]dithiophene(BDT)unit and 2,2-bithiophene unit.Remarkably,the PCE of the chlorinated BDT-based device has been improved to over 14%.Overall,this review discusses the structure-property correlations of these chlorinated polymers in photovoltaic study,which could further provide guidance on the chlorinated strategy and the molecular design for high-performance photovoltaic devices.

Improved performance of polymer solar cells by using inorganic, organic, and doped cathode buffer layers

The interface between the active layer and the electrode is one of the most critical factors that could affect the device performance of polymer solar cells. In this work, based on the typical poly（3-hexylthiophene）：[6,6]-phenyl C61-butyric acid methyl ester （P3HT：PCBM） polymer solar cell, we studied the effect of the cathode buffer layer （CBL） between the top metal electrode and the active layer on the device performance. Several inorganic and organic materials commonly used as the electron injection layer in an organic light-emitting diode （OLED） were employed as the CBL in the P3HT：PCBM polymer solar cells. Our results demonstrate that the inorganic and organic materials like Cs2CO3, bathophenanthroline （Bphen）, and 8-hydroxyquinolatolithium （Liq） can be used as CBL to efficiently improve the device performance of the P3HT：PCBM polymer solar cells. The P3HT：PCBM devices employed various CBLs possess power conversion efficiencies （PCEs） of 3.0%-3.3%, which are ca. 50% improved compared to that of the device without CBL. Furthermore, by using the doped organic materials Bphen：Cs2CO3 and Bphen：Liq as the CBL, the PCE of the P3HT：PCBM device will be further improved to 3.5%, which is ca. 70% higher than that of the device without a CBL and ca. 10% increased compared with that of the devices with a neat inorganic or organic CBL.

Chlorinated polymer solar cells simultaneously enhanced by fullerene and non-fullerene ternary strategies

To achieve efficient polymer solar cells(PSCs)with full utilization of the whole spectrum,the multicomponent devices are of great importance to be deeply explored,especially for their capability of one-step fabrication.However,the research about one same binary system simultaneously derivated various multi-component PSC is still very limited.Herein,we achieved the whole constructions from one binary host to different ternary systems and even the quaternary one.The ternary strategies with fullerene acceptor,PC_(71)BM,and non-fullerene acceptor,BT_(6)IC-BO-4Cl,as the third component,both boosted the device efficiencies of PBT4Cl-Bz:IT-4F binary system from about 9% to comparatively beyond 11%.Despite the comparable improvement of performance,there existed other similarities and differences in two ternary strategies.In detail,the isotropic carrier transport of PC_(71)BM which largely elevated the fill factor(FF)in the corresponding devices,while the strong absorption of BT_(6)IC-BO-4Cl enhanced the short current density(J_(SC))most.More interestingly,quaternary devices based on PBT4Cl-Bz:IT-4F:PC71 BM:BT_(6)IC-BO-4Cl could combine both advantages of fullerene and non-fullerene ternary strategies,further pumped the J_(SC) from 16.44 to the highest level of 19.66 mA cm^(-2) among all devices,eventually resulted in an optimized efficiency of 11.69%.It reveals that both fullerene and non-fullerene ternary strategies have their unique feature to elevate the device performance either by efficient isotropic carrier transport or better coverage of whole sunlight spectrum and easy tunable energy levels from organic materials.The key is how to integrate the two pathways in one system and provide a more competitive solution facing high-quality PSCs.

Recent advances and prospects of asymmetric non-fullerene small molecule acceptors for polymer solar cells

Recently,polymer solar cells developed very fast due to the application of non-fullerence acceptors.Substituting asymmetric small molecules for symmetric small molecule acceptors in the photoactive layer is a strategy to improve the performance of polymer solar cells.The asymmetric design of the molecule is very beneficial for exciton dissociation and charge transport and will also fine-tune the molecular energy level to adjust the open-circuit voltage(Voc)further.The influence on the absorption range and absorption intensity will cause the short-circuit current density(Jsc)to change,resulting in higher device performance.The effect on molecular aggregation and molecular stacking of asymmetric structures can directly change the microscopic morphology,phase separation size,and the active layer's crystallinity.Very recently,thanks to the ingenious design of active layer materials and the optimization of devices,asymmetric non-fullerene polymer solar cells(A-NF-PSCs)have achieved remarkable development.In this review,we have summarized the latest developments in asymmetric small molecule acceptors(A-NF-SMAs)with the acceptor-donor-acceptor(A-D-A)and/or acceptor-donor-acceptor-donor-acceptor(A-D-A-D-A)structures,and the advantages of asymmetric small molecules are explored from the aspects of charge transport,molecular energy level and active layer accumulation morphology.

Properties of Plasma Enhanced Chemical Vapor Deposition Barrier Coatings and Encapsulated Polymer Solar Cells

In this paper, we report silicon oxide coatings deposited by plasma enhanced chem- ical vapor deposition technology （PECVD） on 125 pm polyethyleneterephthalate （PET） surfaces for the purpose of the shelf lifetime extension of sealed polymer solar cells. After optimiza- tion of the processing parameters, we achieved a water vapor transmission rate （WVTR） of ca. 10-a g/m2/day with the oxygen transmission rate （OTR） less than 0.05 cc/m2/day, and succeeded in extending the shelf lifetime to about 400 h in structure of coatings related to the properties of encapsulated solar cells. And then the chemical encapsulated cell was investigated in detail

CONTROLLING THE 3D NANOSCALE ORGANIZATION OF BULK HETEROJUNCTION POLYMER SOLAR CELLS

In this study,the three dimensional nanoscale organization in the photoactive layers of poly(3-hexylthiophene) (P3HT) and a methanofullerene derivative (PCBM) is revealed by transmission electron tomography.After annealing treatment,either at elevated temperature or during slow solvent evaporation,nanoscale interpenetrating networks are formed with high crystalline order and favorable concentration gradients of both components through the thickness of the photoactive layer.Such a tailored morphology account...

Inverted polymer solar cells with employing of electrochemical-anodizing synthesized TiO_2 nanotubes

An inverted structure of polymer solar cells based on Poly（3-hexylthiophene）（P3HT）：[6-6] Phenyl-（6） butyric acid methyl ester （PCBM） with using thin films of TiO2 nanotubes and nanoparticles as an efficient cathode buffer layer is developed. A total of three cells employing TiO2 thin films with different thickness values are fabricated. Two cells use layers of TiO2 nanotubes prepared via self-organized electrochemical-anodizing leading to thickness values of 203 and 423.7 nm, while the other cell uses only a simple sol-gel synthesized TiO2 thin film of nanoparticles with a thickness of 100 nm as electron transport layer. Experimental results demonstrate that TiO2 nanotubes with these thickness values are inefficient as the power conversion efficiency of the cell using 100-nm TiO2 thin film is 1.55%, which is more than the best power conversion efficiency of other cells. This can be a result of the weakness of the electrochemical anodizing method to grow nanotubes with lower thickness values. In fact as the TiO2 nanotubes grow in length the series resistance （Rs） between the active polymer layer and electron transport layer increases, meanwhile the fill factor of cells falls dramatically which finally downgrades the power conversion efficiency of the cells as the fill factor falls.

Improving the performance of polymer solar cells by adjusting the crystallinity and nanoscale phase separation

In this paper, we report a high-perfornmnce P3HT/PCBM bulk-heterojunction solar cell with a power conversion efficiency of 4.85% fabricated by adjusting the polymer crystallinity and nanoscale phase separation using an ultrasonic irradiation mixing approach for the polymer. The grazing incidence X-ray diffraction, UV/Vis spectroscopic, and atomic force microscopic measurement results for the P3HT/PCBM blend films reveal that the P3HT/PCBM film fabricated by ultrasonic irradiation mixing of the P3HT and PCBM solutions for 10 min has a higher degree of crystallinity, a higher absorption efficiency, and better phase separation, which together account for the higher charge transport properties and photovoltaic cell performance.

Optimizing polymer aggregation and blend morphology for boosting the photovoltaic performance of polymer solar cells via a random terpolymerization strategy

Compared to regular conjugated polymers,the random conjugated terpolymers are usually not beneficial to achieve highly efficient non-fullerene(NF)-based polymer solar cells(PSCs)due to their disordered chemical structures.In this work,we report two random terpolymer donors(PBNB80 and PBNB50)by tuning the molar ratio of electron-accepting units of 1,3-di(thiophen-2-yl)naphtho[2,3-c]thiophene-4,9-dione(NTD)and 1,3-bis(4-chlorothiophen-2-yl)-4 H,8 H-benzo[1,2-c:4,5-c’]dithiophene-4,8-dione(ClBDD),at the same time,the parent polymers(PBNB100 and PBNB00)are also compared to study.These four polymer donors exhibit similar optical bandgaps and gradually deepen highest occupied molecular orbital levels.Importantly,aggregation and self-organization properties of the random terpolymer donors are optimized,which result in the better morphology and crystal coherence length after blending with NF acceptor of BO-4 Cl.Particularly,a PBNB80:BO-4 Cl blend forms an optimal nanoscale phase-separation morphology,thereby producing an outstanding power conversion efficiency of 16.0%,which is much higher than those(12.8%and 10.7%)of their parent binary polymer donor-based devices.This work demonstrates that rational using terpolymerization strategy to prepare random terpolymer is a very important method to achieve highly efficient NF-PSCs.

Shorter alkyl chain in thieno[3,4-c]pyrrole-4,6-dione(TPD)-based large bandgap polymer donors – Yield efficient non-fullerene polymer solar cells

Typically,conjugated polymers are composed of conjugated backbones and alkyl side chains.In this contribution,a cost-effective strategy of tailoring the length of alkyl side chain is utilized to design highperforming thieno[3,4-c]pyrrole-4,6-dione(TPD)-based large bandgap polymer donors PBDT-BiTPD(Cχ)(χ=48,52,56),in which x represents the alkyl side chain length in term of the total carbon number.A combination of light absorption,device,and morphology examinations make clear that the shorter alkyl side chains yield(i) higher crystallinity and more predominant face-on crystallite orientation in their neat and BHJ blend films,(ii) higher charge mobilities(6.7×10^(-4) cm~2 V^(-1) s^(-1) for C48 vs.3.2×10^(-4) cm~2 V^(-1) s^(-1) for C56),and negligible charge recombination,consequently,(iii) significantly improved fill-factor(FF) and short current(J_(SC)),while almost the same open circuit voltage(V_(OC)) of ca.0.82 V in their corresponding BHJ devices.In parallel,as alkyl side chain lengths decrease from C56 to C48,power conversion efficiencies(PCEs) increased from 7.8% for C56 to 11.1% for C52,and further to14.1% for C48 in their BHJ solar cells made with a narrow bandgap non-fullerene acceptor Y6.This systematic study declares that shortening the side chain,if providing appropriate solubility in device solution processing solvents,is of essential significance for developing high-performing polymer donors and further improving device photovoltaic performance.

Modeling and implementation of tandem polymer solar cells using wide-bandgap front cells

Tandem device architectures offer a route to greatly increase the maximum possible power conversion efficiencies(PCEs)of polymer solar cells,however,the complexity of tandem cell device fabrication(such as selecting bandgaps of the front and back cells,current matching,thickness,and recombination layer optimization)often result in lower PCEs than are observed in single-junction devices.In this study,we analyze the influence of front cell and back cell bandgaps and use transfer matrix modeling to rationally design and optimize effective tandem solar cell structures before actual device fabrication.Our approach allows us to estimate tandem device parameters based on known absorption coefficients and open-circuit voltages of different active layer materials and design devices without wasting valuable time and materials.Using this approach,we have investigated a series of wide bandgap,high voltage photovoltaic polymers as front cells in tandem devices with PTB7-Th as a back cell.In this way,we have been able to demonstrate tandem devices with PCE of up to 12.8%with minimal consumption of valuable photoactive materials in tandem device optimization.This value represents one of the highest PCE values to date for fullerene-based tandem solar cells.

Design and Synthesis of Acceptor-Donor-Acceptor Type Non-Fullerene Acceptors Using Oxindole-Based Bridge for Polymer Solar Cells Applications

Two acceptor-donor-acceptor(A-D-A)type non-fullerene acceptors(namely WH1 and WH7)containing the oxindole-based bridge are designed and synthesized for polymer solar cells(PSCs)applications.The bridge unit is introduced through a precursor(6-bromo-1-octylindoline-2,3-dione)that contains both bromine and carbonyl and provides the feasibility of the Pd-catalyzed cross-coupling reaction and the Knoevenagel condensation,respectively.This facile synthetic approach exhibits the potential to gain high performance non-fullerene acceptors through extendingπ-conjugated backbone with strong light-absorbing building blocks.The synthesis and properties of WH1 and WH7 are demonstrated with different endcap units,then PSCs are fabricated using PBDB-T:WH1 and PBDB-T:WH7 as the active layers,and attain an average power conversion efficiency(PCE)of 2.58%and 6.24%,respectively.Further device physics studies afford the deep insight of structure variation influence on the device performance.This work provides a facile non-fullerene acceptor design strategy and shows how structure variations impact the PSC performance.

Recent advances in rylene diimide polymer acceptors for all-polymer solar cells

In recent years, a large library of n-type polymers have been developed and widely used as acceptor materi- als to replace fullerene derivatives in polymer solar cells （PSCs）, stimulating the rapid expansion of research on so-called all-polymer solar cells （aPSCs）. In particular, rylene diimide-based n-type polymer acceptors have attracted broad research interest due to their high electron mobility, suitable energy levels, and strong light-harvesting ability in the visible region. Among various polymer acceptors, rylene diimide-based poly- mers presented best performances when served as the acceptor materials in aPSCs. Typically, a record power conversion efficiency （PCE） of 7.7% was very recently achieved from an aPSC with a rylene diimide polymer derivative as the acceptor component. In this review, we highlight recent progress of n-type polymers orig- inated from two significant classes of rylene diimide units, namely naphthalene diimide （NDI） and perylene diimide （PDI）, as well as their derivatives for aPSC applications.

Sodium chloride methanol solution spin-coating process for bulk-heterojunction polymer solar cells

The sodium chloride methanol solution process is conducted on the conventional poly（3-hexylthiophene）（P3HT）/[6,6]-phenyl-C61-butyric acid methyl ester（PC_（61）BM） polymer bulk heterojunction solar cells. The device exhibits a power conversion efficiency of up to 3.36%, 18% higher than that of the device without the solution process. The measurements of the active layer by x-ray photoelectron spectroscopy（XPS）, atomic force microscopy（AFM）, and ultraviolet photoelectron spectroscopy（UPS） indicate a slight phase separation in the vertical direction and a sodium chloride distributed island-like interface between the active layer and the cathode. The capacitance–voltage（C–V） and impedance spectroscopy measurements prove that the sodium chloride methanol process can reduce the electron injection barrier and improve the interfacial contact of polymer solar cells. Therefore, this one-step solution process not only optimizes the phase separation in the active layers but also forms a cathode buffer layer, which can enhance the generation, transport, and collection of photogenerated charge carriers in the device simultaneously. This work indicates that the inexpensive and non-toxic sodium chloride methanol solution process is an efficient one-step method for the low cost manufacturing of polymer solar cells.

Ternary strategy: An analogue as third component reduces the energy loss and improves the efficiency of polymer solar cells

Ternary strategy is a convenient and effective method to boost the performance of polymer solar cells(PSCs).Utilizing a ternary strategy to trade-off between the energy loss and the efficiency of devices however requires further exploration.Here,through the hydroxyl(-OH)and acetoxy(-OCOMe)substitution atβ-position of the IC terminal group,we developed two new synthetic acceptors,BTIC-OH-βand BTICOCOMe-β,which were designed to confine the morphology aggregation.Introduction of an analogue as the third component provides a simple but efficient way to further balance the short current density(Jsc)and open-circuit voltage(Voc),leading to a champion efficiency based on PBDB-T:PBDB-TF:BTIC-OCOMe-β,effectively as high as 12.45%.The results were examined mainly in terms of the morphology characterization,electroluminescence external quantum efficiency(EQEEL),steady-state photoluminescence(PL)and transient technology.It suggested fine-tuning of the morphology by ratio modulation,reduction of the energy loss,construction of a promising pathway for charge transfer in the ternary system and enhancing the carrier extraction.In this way,a ternary strategy with an analogue donor could provide more routes to higher-quality solar cells.

Effects of annealing rate and morphology of sol–gel derived ZnO on the performance of inverted polymer solar cells

The effects of annealing rate and morphology of sol–gel derived zinc oxide （ZnO） thin films on the performance of inverted polymer solar cells （IPSCs） are investigated. ZnO films with different morphologies are prepared at different annealing rates and used as the electron transport layers in IPSCs. The undulating morphologies of ZnO films fabricated at annealing rates of 10 ℃/min and 3 ℃/min each possess a rougher surface than that of the ZnO film fabricated at a fast annealing rate of 50 ℃/min. The ZnO films are characterized by atomic force microscopy （AFM）, optical transmittance measurements, and simulation. The results indicate that the ZnO film formed at 3 ℃/min possesses a good-quality contact area with the active layer. Combined with a moderate light-scattering, the resulting device shows a 16% improvement in power conversion efficiency compared with that of the rapidly annealed ZnO film device.

Effects of acetone-soaking treatment on the performance of polymer solar cells based on P3HT/PCBM bulk heterojunction

The improvement of the acetone-soaking treatment to the performance of polymer solar cells based on the P3HT/PCBM bulk heterojunction is reported. Undergoing acetone-soaking, the PCBM does not distribute uniformly in the vertical direction, a PCBM enrichment layer forms on the top of the active layer, which is beneficial to the collec- tion of the carriers and blocking the inverting diffusion carriers. X-ray photoelectron spectroscopy （XPS） analysis reveals that the PCBM weight ratio on the top of the active layer increases by 20% after the acetone-soaking treatment. Due to the nonuniform distribution of PCBM, the short-circuit current density, the open-circuit voltage, and the fill factor are enhanced significantly. Finally, the power conversion efficiency of the acetone-soaking device increases by 31% compared with the control device.

High-efficiency single and tandem fullerene solar cells with asymmetric monofluorinated diketopyrrolopyrrole-based polymer

Design and synthesis of low bandgap(LBG) polymer donors is inevitably challenging and their processability from a non-halogenated solvent system remains a hurdle to overcome in the area of highperformance polymer solar cells(PSCs).Due to a high aggregation tendency of LBG polymers,especially diketopyrrolopyrrole(DPP)-based polymers coupled with bithiophenes in the polymer backbones,their widespread adoption in non-ha logena ted solvent-processed PSCs has been limited.Herein,a novel LBG DPP-based polymer,called PDPP4 T-1 F with asymmetric arrangement of fluorine atom,has been successfully synthesized and showed an outstanding power conversion efficiency(PCE) of 10.10% in a singlejunction fullerene-based PSCs.Furthermore,an impressive PCE of 13.21% has been achieved in a tandem device from a fully non-halogenated solvent system,which integrates a wide bandgap PDTBTBz-2 F polymer in the bottom cell and LBG PDPP4 T-1 F polymer in the top cell.The achieved efficiency is the highest value reported in the literature to date in fullerene-based tandem PSCs.We found that a uniformly distributed interpenetrating fibril network with nano-scale phase separation and anisotropy of the polymer backbone orientation for efficient charge transfer/transport and suppressed charge recombination in PDPP4 T-1 F-based PSCs led to outstanding PCEs in single and tandem-junction PSCs.

Influence of small-molecule material on performance of polymer solar cells based on MEH-PPV:PCBM blend

In this work, the influence of a small-molecule material, tris（8-hydroxyquinoline） aluminum （Alq3）, on bulk heterojunction （BHJ） polymer solar cells （PSCs） is investigated in devices based on the blend of poly（2-methoxy-5-（2- ethylhexyloxy）-1,4-phenylenevinylene） （MEH-PPV） and [6,6]-phenyl-C61-butyric acid methyl ester （PCBM）. By doping Alq3 into MEH-PPV：PCBM solution, the number of MEH-PPV excitons can be effectively increased due to the energy transfer from Alq3 to MEH-PPV, which probably induces the increase of photocurrent generated by excitons dissociation. However, the low carrier mobility of Alq3 is detrimental to the efficient charge transport, thereby blocking the charge collection by the respective electrodes. The balance between photon absorption and charge transport in the active layer plays a key role in the performance of PSCs. For the case of 5 wt.% Alq3 doping, the device performance is deteriorated rather than improved as compared with that of the undoped device. On the other hand, we adopt Alq3 as a buffer layer instead of commonly used LiF. All the photovoltaic parameters are improved, yielding an 80% increase in power conversion efficiency （PCE） at the optimum thickness （1 nm） as compared with that of the device without any buffer layer. Even for the 5 wt.% Alq3 doped device, the PCE has a slight enhancement compared with that of the standard device after modification with 1 nm （or 2 nm） thermally evaporated Alq3. The performance deterioration of Alq3-doped devices can be explained by the low solubility of Alq3, which probably deteriorates the bicontinuous D-A network morphology; while the performance improvement of the devices with Alq3 as a buffer layer is attributed to the increased light harvesting, as well as blocking the hole leakage from MEH-PPV to the aluminum （Al） electrode due to the lower highest occupied molecular orbital （HOMO） level of Alq3 compared with that of MEH-PPV.

Performance and Stability of Polymer Solar Cells Based on the Blends of Poly(3-Hexylthiophene) and Indene-C_(60) Bis-Adduct

The performance and morphology stability of polymer bulk heterojunetion solar cells based on poly（3-hexylthiophene） （P3HT） as the donor and indene-C6o bisadduct （ICBA） or methanofullerene [6,6]-phenyl C61-butyric acid methyl ester （PCBM） as the aeceptor are compared. Effect of the different donor and aeeeptor weight ratios on photo- voltaic performance of the P3HT：ICBA device is studied. The optimal device achieved power conversion emeiency of 5.51~o with dso of l0.86mA/cm2, Voc of 0.83 V, and fill factor （FF） of 61.1 % under AM 1.5G （lOOmW/cm2） simulated solar illumination. However, the stability measurement shows that cells based on P3HT：ICBA are less stable than those of the device based on P3HT：PCBM. Atomic force microscope results reveal that the morphol- ogy of the P3HT：ICBA film changed considerably during the storage periods due to unstable interpenetrating D-A network. This observation can be explained by the fact that there is lack of intermolecular hydrogen bonds in the P3HT：ICBA system. However, in the P3HT：PCBM system the molecules in the blend film are firmly held together in the solid state by means of intermoleeular hydrogen bonds originating from C-H. ~. Os bonds （where Os comes from the singly-bonded 0 atom of PCBM）, forming a stable three-dimensional network. The measured PL decay lifetimes for P3HT：PCBM and P3HT：ICBA systems are 33.66 ns and 35.34 ns, respectively, indicating that the P3HT：ICBA system has a less efficient exciton separation eftleiency than that of P3HT：PCBM, which may result in the interracial photogenerated charges accumulated on the D： A interface. Such progressive phase segregation between P3HT and ICBA eventually leads to the degradation in performance and deteriorates the stability of the device. We also present an approach to enhance the stability of P3HT：ICBA systems by adding PCBM as the second acceptor. Our results show that by carefully tuning the contents of PCBM as the second acceptor, more stable polymer solar cells can be obtained.