期刊文献+
共找到733篇文章
< 1 2 37 >
每页显示 20 50 100
Preparation,characterization and catalytic properties of S_2O_8^(2-)/ZrO_2-CeO_2 solid superacid catalyst 被引量:25
1
作者 樊国栋 沈茂 +1 位作者 张昭 贾发瑞 《Journal of Rare Earths》 SCIE EI CAS CSCD 2009年第3期437-442,共6页
A novel solid superacid catalyst S2O8^2-/ZrO2-CeO2 was prepared by a coprecipitation method and characterized by means of XRD FTIR, BET, TEM and DSC/TG analysis methods. The results indicated that incorporation of app... A novel solid superacid catalyst S2O8^2-/ZrO2-CeO2 was prepared by a coprecipitation method and characterized by means of XRD FTIR, BET, TEM and DSC/TG analysis methods. The results indicated that incorporation of appropriate amounts of Ce into the catalyst was beneficial to the formation of sole tetragonal ZrO2 and effectively prevented from the formation of monoclinic ZrO〉 and restrained the loss of sulfated species. XRD revealed the presence of tetragonal Ce0.16Zr0.84O2phase in the case of S2O8^2-/ZrO2-CeO2 calcined above 500 ℃. Catalytic activities of S2O8^2-/ZrO2-CeO2 for the esterification of lactic acid with n-butanol was studied. The results showed that the optimum conditions were as follows: calcination temperature of the catalyst 600 ℃, n(lactic acid):n(n-butyl alcohol)=1.0:3.0, w(S2O8^2-/ZrO2- CeO2)=12.0%, reaction temperature 145 ℃, and reaction time 2 h. The esterification efficiency of lactic acid was about 96.6%. 展开更多
关键词 solid superacid catalyst S2O8^2-/ZrO2-CeO2 n-butyl lactate esterification rare earths
下载PDF
Preparation of solid acid catalyst SO4^2-/TiO2/γ-Al2O3 for esterification: A study on catalytic reaction mechanism and kinetics 被引量:3
2
作者 Ying Yuan Wenwei Jiang Jinjin Li 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2019年第11期2696-2704,共9页
In this work, a series of SO4^2-/TiO2/γ-Al2O3 solid acid catalysts were synthesized by impregnation method, in which nano-TiO2 was prepared by sol–gel method, and then the nano-TiO2 sol was loaded on porous γ-Al2O3... In this work, a series of SO4^2-/TiO2/γ-Al2O3 solid acid catalysts were synthesized by impregnation method, in which nano-TiO2 was prepared by sol–gel method, and then the nano-TiO2 sol was loaded on porous γ-Al2O3 supporter through impregnation. The structure and property of catalyst were characterized by XRD, N2-BET,SEM, TEM, XPS, NH3-TPD, Pyridine-IR and FT-IR. In addition, the catalyst of chelate bidentate coordination acid center model was established. The catalytic performance test was carried out in the esterification of n-butyl alcohol with lauric acid and the catalyst showed excellent activity. The experimental results showed that the medium strength acid sites were more dominant active sites than the strong and weak acid sites for the rapid esterification reaction. Its kinetic behaviors and activation energy were studied for the esterification under the catalytic reaction condition. 展开更多
关键词 solid acid catalyst NANO-TIO2 esterification KINETICS
下载PDF
Catalytic Hydrothermal Liquefaction of Algae for Production of Bio-oil with Solid Superacid Catalyst SO_(4)^(2−)/ZrO_(2)
3
作者 LIU Mengfan YU Xin +4 位作者 YU Xiaofan ZHAO Yongnian FENG Lijuan LI Xianguo YAO Shuo 《Journal of Ocean University of China》 SCIE CAS CSCD 2022年第5期1214-1226,共13页
Solid superacid SO_(4)^(2−)/ZrO_(2)as heterogeneous catalyst was prepared to upgrade the bio-oil in the progress of hydrother-mal liquefaction(HTL)for the represented algae of Chlorella vulgaris and Enteromorpha proli... Solid superacid SO_(4)^(2−)/ZrO_(2)as heterogeneous catalyst was prepared to upgrade the bio-oil in the progress of hydrother-mal liquefaction(HTL)for the represented algae of Chlorella vulgaris and Enteromorpha prolifera.The solid superacid catalyst could obviously adjust the composition of the bio-oil and improve the higher heating values(HHVs).The catalytic performance could be regulated by adjusting the acid amount and acid strength of SO_(4)^(2−)/ZrO_(2).Furthermore,it was explored the catalytic effects of SO_(4)^(2−)/ZrO_(2)by the HTL for algae major model components,including polysaccharides,proteins,lipids,binary mixture and ternary mixture.The results showed that the introducing of SO_(4)^(2−)/ZrO_(2)catalyst could increase the yields of bio-oil from proteins and lipids,and avoid the Maillard reaction between polysaccharides and proteins.Moreover,a possible reaction pathway and mechanisms has proposed for the formation of bio-oils from HTL of algae catalyzed by SO_(4)^(2−)/ZrO_(2)based on the systematic research of the producing bio-oil from major model components. 展开更多
关键词 BIO-OIL heterogeneous catalyst solid superacid catalyst hydrothermal liquefaction algae major model components
下载PDF
Influence of Microwave Radiation on Properties and Structure of Fe_2O_3/SO_4^(2-) Solid Superacid Catalyst
4
作者 Yinan NING (Kunming Institute of Precious Metals, Kunming 650221, China)Jiaqiang WANG and Pinjie HONG(Yunnan University, Kunming 650091, China) 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 1996年第4期307-311,共5页
The microwave radiation method was introduced to prepare the Fe_2O_3/SO solid superacid.Its structure and properties were investigated by means of X-ray diffraction and infrared spectrum analyses as well as measuremen... The microwave radiation method was introduced to prepare the Fe_2O_3/SO solid superacid.Its structure and properties were investigated by means of X-ray diffraction and infrared spectrum analyses as well as measurement of magnetic susceptibility and rate of esterification. The structure of the superacids prepared in microwave field can be crystalline or non-crystalline, the latter has not been reported yet in literatures. Comparing with the traditional superacid, the non-crystalline Fe2O3/SO superacid prepared in microwave field has the highest magnetic susceptibility and catalytic activity. The di-coordination of Fe2O3 and SO and the S=O bi-bond were reinforced by microwave radiation, which is favorable for increasing the acid intensity of the Fe2O3/SO catalyst 展开更多
关键词 SO Influence of Microwave Radiation on Properties and Structure of Fe2O3/SO4 solid superacid catalyst FE
下载PDF
Construction of a Bronsted-Lewis solid acid catalyst La-PW-SiO_(2)/SWCNTs based on electron withdrawing effect of La(Ⅲ)onπbond of SWCNTs for biodiesel synthesis from esterification of oleic acid and methanol
5
作者 Qing Shu Xinyuan Liu +3 位作者 Yanting Huo Yuhui Tan Caixia Zhang Laixi Zou 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2022年第4期351-362,共12页
A novel solid Bronsted-Lewis acid catalyst La-PW-SiO_(2)/SWCNTs(single-wall carbon nanotubes)was synthesized from the synergistic modification of H_(3)PW_(12)O_(40)(HPW)by single-walled carbon nanotubes functionalized... A novel solid Bronsted-Lewis acid catalyst La-PW-SiO_(2)/SWCNTs(single-wall carbon nanotubes)was synthesized from the synergistic modification of H_(3)PW_(12)O_(40)(HPW)by single-walled carbon nanotubes functionalized with sidewall hydroxyl groups(SWCNTs–OH)and La^(3+) via sol–gel method.The freshly prepared catalyst was characterized by several methods,and the catalytic activity and stability of it were studied from the esterification of oleic acid and methanol.Results showed that the highest conversion of oleic acid was 93.1%(mass)and maintained as high as 88.7%(mass)after six cycles of La-PW-SiO_(2)/SWCNTs.The high catalytic activity and stability of La-PW-SiO_(2)/SWCNTs can be attributed to the strong electron withdrawing effect of La^(3+) on π bond of SWCNTs,because it can facilitate the formation of a large number of strong Lewis acid sites.Therefore,the reduction of catalytic activity of a solid acid catalyst due to the fact that hydration reaction of its Bronsted acid sites can be effectively reduced.La-PW-SiO_(2)/SWCNTs can be an efficient and economical catalyst,because it shows good catalytic activity and stability. 展开更多
关键词 Single-wall carbon nanotubes(SWCNTs) H_(3)PW_(12)O_(40) La^(3+) solid Bronsted-Lewis acid catalyst BIODIESEL esterification
下载PDF
ResearchonS202一/Zr02solidsuperacidinsynthesisofn—amylacetateundermicrowaveradiation 被引量:3
6
作者 陶利燕 候鑫 +5 位作者 王刚 徐骏 董成 聂沃 曹汉迪 张立庆 《浙江科技学院学报》 CAS 2013年第5期329-334,共6页
采用沉淀一浸渍法制得S2O62 8-/ZrO2固体超强酸,在微波辐射下催化合成乙酸正戊酯。通过单因素实验和正交实验优化了合成的反应条件;采用Hammett指示剂法、BET法、红外光谱、电子透镜技术和x_射线衍射对其进行了表征。实验结果表明,... 采用沉淀一浸渍法制得S2O62 8-/ZrO2固体超强酸,在微波辐射下催化合成乙酸正戊酯。通过单因素实验和正交实验优化了合成的反应条件;采用Hammett指示剂法、BET法、红外光谱、电子透镜技术和x_射线衍射对其进行了表征。实验结果表明,采用最佳制备条件下得到的催化剂在微波辐射下催化合成乙酸正戊酯的最优合成条件为:醇酸摩尔比1.9:1,反应温度135℃,反应时间25min,催化剂用量1.2g,功率500W,收率为97.8%。该工艺具有绿色、安全、操作简单和收率高等优点。 展开更多
关键词 固体超强酸 乙酸正戊酯 催化酯化 微波合成 正交设计 表征
下载PDF
Preparation and Catalytic Application of Novel Water Tolerant Solid Acid Catalysts of Zirconium Sulfate/HZSM-5 被引量:11
7
作者 JIANG Ya-jie JUAN Joon Ching +3 位作者 MENG Xiu-juan CAO Wei-liang YARMO Mohd Ambar ZHANG Jing-chang 《Chemical Research in Chinese Universities》 SCIE CAS CSCD 2007年第3期349-354,共6页
Esterification of acrylic acid(AA) to produce AA esters has widespread application in the chemical industry. A series of water tolerant solid acid catalysts was prepared, and characterized by XRD, nitrogen adsorptio... Esterification of acrylic acid(AA) to produce AA esters has widespread application in the chemical industry. A series of water tolerant solid acid catalysts was prepared, and characterized by XRD, nitrogen adsorption, TGA-DTA, XPS, and ammonia adsorption FTIR. The effects of Si/Al ratio, zirconium sulfate(ZS) loading on HZSM-5 and calcination temperature on the esterification were investigated. When 20% (mass fraction) ZS is loaded on HZSM-5, the conversion of AA reaches 100%. XRD analysis indicates that ZS is highly dispersed on HZSM-5 because no crystalline structure assigned to ZS is found. Catalytic activity and hydrophobicity of ZS supported on HZSM-5 are higher compared with those of parent ZS or HZSM-5. Results show that this kind of novel catalysts is an efficient water tolerant solid acid catalyst for esterification reactions. 展开更多
关键词 solid acid catalyst Zirconium sulfate HZSM-5 esterification reaction Water tolerant
下载PDF
Synthesis of Ethyl Oleate Catalyzed by Solid Superacid SO_4^(2-)/TiO_2/La^(3+) 被引量:3
8
作者 YANG Lei GUO Hui HUANG Yu-dong 《Chemical Research in Chinese Universities》 SCIE CAS CSCD 2010年第1期92-97,共6页
Rare-earth compound solid superacid SO4^2 -/TiO2/La3+ was prepared. Its catalytic activity was examined under different synthetic conditions for the esterification of propanoic acid and n-butyl alcohol as probing rea... Rare-earth compound solid superacid SO4^2 -/TiO2/La3+ was prepared. Its catalytic activity was examined under different synthetic conditions for the esterification of propanoic acid and n-butyl alcohol as probing reaction. The optimum conditions were also found, which were the pH=8, the depositing time was 24 h, the mass fraction of La(NO3)3 used in solid superacid was 5%, the concentration of H2SO4 was 1.25 mol/L, the soaking time in H2SO4 was 16 h and the calcining temperature was 500℃. The ethyl oleate was synthesized from oleic acid and ethanol in the presence of SO4^2-/TiO2/La3+. The optimum reaction conditions were obtained which were the reaction time was 6 h, molar ratio of oleic acid to ethanol was 1:4 and the mass fraction of catalyst was 4%. 展开更多
关键词 solid superacid Ethyl oleate esterification
下载PDF
Solid Superacid Catalyzed Efficient Synthesis of 2-Diethylaminoethyl Aryloxyacetates 被引量:2
9
作者 MingDeCHEN AnQiCHEN MinLIN ZhaoYingLI JinCHEN 《Chinese Chemical Letters》 SCIE CAS CSCD 2005年第2期197-200,共4页
Diethylaminoethyl aryloxyacetates are prepared efficiently in 75~95% yields bycondensation of the corresponding aryloxyacetic acids with 2-diethylaminoethanol in the presenceof catalytic amount of solid superacid SO4 ... Diethylaminoethyl aryloxyacetates are prepared efficiently in 75~95% yields bycondensation of the corresponding aryloxyacetic acids with 2-diethylaminoethanol in the presenceof catalytic amount of solid superacid SO4 /Fe2O3. 2- 展开更多
关键词 solid superacid esterification diethylaminoethyl aryloxyacetate catalyst.
下载PDF
Reaction Kinetics of Biodiesel Synthesis from Waste Oil Using a Carbon-based Solid Acid Catalyst 被引量:9
10
作者 舒庆 高继贤 +1 位作者 廖玉会 王金福 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2011年第1期163-168,共6页
有基于碳的稳固的酸催化剂的同时的 transesterification 和酯化作用的动力学被学习。二稳固的酸催化剂被使碳化的蔬菜油沥青和石油沥青的 sulfonation 准备。这些催化剂根据元素的分析,酸味地点集中, Brunauer-Emmett-Teller (赌注)... 有基于碳的稳固的酸催化剂的同时的 transesterification 和酯化作用的动力学被学习。二稳固的酸催化剂被使碳化的蔬菜油沥青和石油沥青的 sulfonation 准备。这些催化剂根据元素的分析,酸味地点集中, Brunauer-Emmett-Teller (赌注) 表面区域和毛孔尺寸被描绘。有二催化剂的运动参数被决定,并且反应系统能被描述为假同类的催化反应。所有前面、反向的反应跟随第二顺序动力学。从运动方程的计算集中价值在对试验性的价值的好同意。 展开更多
关键词 固体酸催化剂 反应动力学 生物柴油 碳基 废油脂 合成 均相催化反应 植物油沥青
下载PDF
Friedel-Crafts Acylation of Ferrocene Catalyzed by Solid Superacid,Silica-supported Polytrifluoromethanesulfosiloxane 被引量:1
11
作者 RuiJueHU BaoGuoLI MinXU 《Chinese Chemical Letters》 SCIE CAS CSCD 2005年第2期183-185,共3页
关键词 Friedel-Crafts acylation FERROCENE solid superacid catalyst silica-supported polytri-fluoromethanesulfosiloxane.
下载PDF
Catalysis of SO_4^(2-)-ZrO_2/TiO_2 nanometer solid superacid
12
作者 LU Wei-qi?1,2, Zhou Yang2, Liu Yi-lu1 1 Department of Chemistry, Foshan University, Foshan 528000 China 2 School of Material and Chemical Engineering,Southern Institute of Metallurgy,Ganzhou 341000 China 《合成化学》 CAS CSCD 2004年第z1期152-152,共1页
关键词 solid superacid nano-catalyst ZrO2 TiO2
下载PDF
聚乙烯聚吡咯烷酮负载Bronsted酸性离子液体固体酸催化剂的制备与应用
13
作者 韩宇宁 谢平 +3 位作者 李涛 鲁宜武 赵青山 李忠涛 《当代化工研究》 CAS 2024年第10期44-46,共3页
传统无机酸催化剂存在对设备腐蚀严重、环境危害、催化剂可重复使用性困难等问题,亟需开发催化活性高、可循环性能好的绿色固体酸催化剂。本文将离子液体通过共价键接枝负载于聚乙烯聚吡咯烷酮载体表面,并进一步通过硫酸酸化制备了一种... 传统无机酸催化剂存在对设备腐蚀严重、环境危害、催化剂可重复使用性困难等问题,亟需开发催化活性高、可循环性能好的绿色固体酸催化剂。本文将离子液体通过共价键接枝负载于聚乙烯聚吡咯烷酮载体表面,并进一步通过硫酸酸化制备了一种新型的负载型Bronsted酸性离子液体固体酸催化剂([PVPP-PS]HSO4)。研究表明,离子液体和磺酸根被成功地接枝到聚乙烯聚吡咯烷酮载体表面,为酯化反应提供了丰富的催化活性位点,催化剂的热稳定性和结构稳定性得到了进一步提高。[PVPP-PS]HSO4催化剂用于催化酯化反应合成乙酸乙酯,乙酸乙酯的收率可达到83%,并且催化剂在循环使用6次后乙酸乙酯收率仍能保持在80%以上,是一种高效、环保、可重复使用的新型固体酸催化剂。 展开更多
关键词 离子液体 固体酸催化剂 聚乙烯聚吡咯烷酮 酯化反应 负载
下载PDF
Preparation, Characterization and Catalytic Activity of Alkyl Benzene Sulfonic Acid Carbon-Based Acid Catalyst
14
作者 Huoxin Luan Yunqiang Wu +5 位作者 Wenxiang Wu Quansheng Chen Hailing Zhang Kang Liu Guangmiao Qu Wei Ding 《Journal of Surface Engineered Materials and Advanced Technology》 2015年第2期93-101,共9页
Based on starch and series of alkyl benzene sulfonic acid as the materials, a novel carbon-based solid acid catalyst is synthesized using hydrothermal method. This catalyst exhibits much higher catalytic activity in t... Based on starch and series of alkyl benzene sulfonic acid as the materials, a novel carbon-based solid acid catalyst is synthesized using hydrothermal method. This catalyst exhibits much higher catalytic activity in the reaction of esterification of Mono-fatty alcohol polyoxyethylene maleate esters with 1,4-butanediol. The structure of carbon-based solid acid catalyst was charactered by IR and XRD, characterizations showed that this catalyst exhibited high –SO3H loading. Reusability of the carbon-based solid acid catalyst for esterification showed that after recycling five times the activity remained unchanged. 展开更多
关键词 ALKYL Benzene Sulfonic ACID Carbon-Based solid ACID catalyst esterification
下载PDF
Pt-SO_(4)^(2-)/ZrO_(2)-Al_(2)O_(3)催化正己烷异构化反应动力学模型 被引量:1
15
作者 张孔远 崔孟达 +2 位作者 黄仁强 马亮 刘晨光 《石油学报(石油加工)》 EI CAS CSCD 北大核心 2023年第2期300-309,共10页
采用共沉淀法制备SO_(4)^(2-)/ZrO_(2)-Al_(2)O_(3),等体积浸渍法制备Pt-SO_(4)^(2-)/ZrO_(2)-Al_(2)O_(3)固体超强酸催化剂,采用5mL连续固定床反应装置评价了反应温度、反应压力、氢/油体积比和体积空速对Pt-SO_(4)^(2-)/ZrO_(2)-Al_(2... 采用共沉淀法制备SO_(4)^(2-)/ZrO_(2)-Al_(2)O_(3),等体积浸渍法制备Pt-SO_(4)^(2-)/ZrO_(2)-Al_(2)O_(3)固体超强酸催化剂,采用5mL连续固定床反应装置评价了反应温度、反应压力、氢/油体积比和体积空速对Pt-SO_(4)^(2-)/ZrO_(2)-Al_(2)O_(3)催化剂催化正己烷临氢异构化反应活性的影响。进行拟一级动力学模型验证,建立正己烷异构化一级反应网络动力学模型。结果表明:增加反应压力和体积空速,正己烷转化率降低;随着氢/油体积比、反应温度的升高,正己烷转化率提高。在180~200℃范围内,正己烷在Pt-SO_(4)^(2-)/ZrO_(2)-Al_(2)O_(3)催化剂上的临氢异构化反应可以视为简单拟一级可逆反应,反应活化能Ea为81.84kJ/mol,指前因子A为1.57×10^(9)h^(-1);建立的拟一级反应网络动力学模型与实验结果拟合较好,各步反应活化能在76~127kJ/mol之间。 展开更多
关键词 正己烷 固体超强酸催化剂 临氢异构化 动力学模型
下载PDF
Pt-SO_(4)^(2-)/ZrO_(2)-WO_(3)固体超强酸催化剂的制备及其异构化性能评价
16
作者 张孔远 崔孟达 +2 位作者 马亮 黄仁强 刘晨光 《石油学报(石油加工)》 EI CAS CSCD 北大核心 2023年第3期508-516,共9页
在Pt-SO_(4)^(2-)/ZrO_(2)固体超强酸中引入WO_(3)制备了Pt-SO_(4)^(2-)/ZrO_(2)-WO_(3)固体超强酸催化剂,采用N 2吸附-脱附、XRD、TPD、TPR和Py-IR等手段对所制备催化剂进行了分析表征;在5 mL连续固定床反应装置上,考察了WO_(3)含量对P... 在Pt-SO_(4)^(2-)/ZrO_(2)固体超强酸中引入WO_(3)制备了Pt-SO_(4)^(2-)/ZrO_(2)-WO_(3)固体超强酸催化剂,采用N 2吸附-脱附、XRD、TPD、TPR和Py-IR等手段对所制备催化剂进行了分析表征;在5 mL连续固定床反应装置上,考察了WO_(3)含量对Pt-SO_(4)^(2-)/ZrO_(2)-WO_(3)催化剂作用下正己烷临氢异构化反应活性的影响。结果表明:WO_(3)的引入能够显著调节Pt-SO_(4)^(2-)/ZrO_(2)-WO_(3)催化剂中四方晶相ZrO_(2)含量、比表面积、孔体积、平均孔径和酸量等,使暴露在催化剂表面的活性中心明显增加;在反应温度240℃、反应压力2.0 MPa、体积空速1.0 h-1、氢气/正己烷体积比600的条件下,WO_(3)质量分数16%的Pt-SO_(4)^(2-)/ZrO_(2)-WO_(3)催化剂的异构化活性最高,正己烷转化率为82.27%,异构化率为81.32%,二甲基丁烷选择性为34.28%。 展开更多
关键词 正己烷 固体超强酸 Pt-SO_(4)^(2-)/ZrO_(2)-WO_(3)催化剂 临氢异构化
下载PDF
生物质磁性固体酸催化剂的制备、表征及催化合成生物柴油的性能研究
17
作者 付小琴 李姣 +2 位作者 薛静 刘晓红 白延宁 《当代化工》 CAS 2023年第3期627-632,共6页
为了寻找一种以生物质废弃物为原料,低成本、高效率、温和地合成固体酸催化剂的方法,以废弃生物质橘子皮为原料,合成了磁性多孔碳质(MPCs)固体酸催化剂。采用XRD、IR和TGA等手段对其进行分析表征,并以油酸和乙醇酯化反应为模型,研究其... 为了寻找一种以生物质废弃物为原料,低成本、高效率、温和地合成固体酸催化剂的方法,以废弃生物质橘子皮为原料,合成了磁性多孔碳质(MPCs)固体酸催化剂。采用XRD、IR和TGA等手段对其进行分析表征,并以油酸和乙醇酯化反应为模型,研究其催化性能。结果表明:在80℃、乙醇与油酸的物质的量比值为20%、催化剂与油酸的质量比值为7%的条件下反应8 h,MPCs-0.4-SO3H和MPCs-0.6-SO3H的酯化率分别达到77.9%和70.2%,显著高于商用催化剂Amberlyst-15的酯化率;在含水量为油酸质量的5%以及重复使用3次的酯化率与TOFs值也较Amberlyst-15的高;故实验制得的催化剂在酯化动力学、酯化率、耐水性与热稳定性等方面均优于商用催化剂Amberlyst-15,特别是其优越的磁性易分离特性使得酯化反应更方便、简单。 展开更多
关键词 磁性固体酸催化剂 生物柴油 酯化反应 油酸乙酯
下载PDF
固体超强酸C_(5)/C_(6)异构化催化剂RISO-C的开发及工业应用 被引量:2
18
作者 刘洪全 于中伟 +2 位作者 张秋平 孙义兰 任坚强 《石油炼制与化工》 CAS CSCD 北大核心 2023年第2期1-8,共8页
采用水热法合成了细晶粒氢氧化锆,并以其为基元制备了高比表面积Pt/SO42--ZrO2催化剂,通过氧化铝改性进一步提高了Pt/SO42--ZrO2的酸性和热稳定性,开发出高活性、高选择性、高稳定性并具有优异再生性能的固体超强酸C5/C6异构化催化剂RIS... 采用水热法合成了细晶粒氢氧化锆,并以其为基元制备了高比表面积Pt/SO42--ZrO2催化剂,通过氧化铝改性进一步提高了Pt/SO42--ZrO2的酸性和热稳定性,开发出高活性、高选择性、高稳定性并具有优异再生性能的固体超强酸C5/C6异构化催化剂RISO-C,并将其应用于国内首套固体超强酸C5/C6异构化工业装置上。工业应用结果表明,以催化重整拔头油为原料,在反应器入口温度为170℃、气液分离罐压力为1.5 MPa、原料质量空速为1.26 h^(-1)、氢/油摩尔比为1.95的反应条件下,RISO-C催化剂具有优异的异构化活性和稳定性,C5异构化率高于70%,C6异构化率高于85%,异构化稳定汽油的研究法辛烷值(RON)达到85,应用前景良好。 展开更多
关键词 固体超强酸 催化剂 C_(5)/C_(6) 异构化 氧化锆 氧化铝
下载PDF
稀土复合固体超强酸SO_(4)^(2-)/ZrO_(2)-MoO_(3)-Yb_(2)O_(3)催化合成乙酸异龙脑酯的研究
19
作者 吴瑾 卢晓春 吴粦华 《广东化工》 CAS 2023年第21期42-44,共3页
通过沉淀-浸渍方法制备稀土复合固体超强酸SO_(4)^(2-)/ZrO_(2)-MO_(3)-Yb_(2)O_(3),加入稀土元素Yb以改良固体超强酸的性能,通过Hammett酸指示剂法检测固体酸的酸强度。以莰烯和乙酸为原料,由自制的固体超强酸催化合成乙酸异龙脑酯。通... 通过沉淀-浸渍方法制备稀土复合固体超强酸SO_(4)^(2-)/ZrO_(2)-MO_(3)-Yb_(2)O_(3),加入稀土元素Yb以改良固体超强酸的性能,通过Hammett酸指示剂法检测固体酸的酸强度。以莰烯和乙酸为原料,由自制的固体超强酸催化合成乙酸异龙脑酯。通过CG-MS对酯含量进行测定,研究了催化剂用量、MoO_(3)/ZrO_(2)、焙烧温度、反应时间和反应温度等对酯化率的影响。结果表明:经600℃焙烧的MoO_(3)/ZrO_(2)为8%的催化剂,在其用量占总反应物的质量分数为3%,反应温度80℃,反应时间6 h的条件下,酯化率可达到76%。 展开更多
关键词 莰烯 乙酸 稀土复合固体超强酸 催化剂 酯化 乙酸异龙脑酯
下载PDF
固体酸催化合成柠檬酸三丁酯的研究进展
20
作者 雷双泰 丁梦姣 +2 位作者 郭文婷 刘海龙 宋河远 《分子催化》 CAS CSCD 北大核心 2023年第6期601-613,I0003,共14页
柠檬酸三丁酯是一种新型绿色无毒环保型增塑剂,被认为是传统非环保、有毒增塑剂—邻苯二甲酸酯的替代品,已经被广泛应用在高分子材料和石油化工等行业.我们综述了近年来固体酸催化合成柠檬酸三丁酯的研究进展,涉及到的催化剂包括固体超... 柠檬酸三丁酯是一种新型绿色无毒环保型增塑剂,被认为是传统非环保、有毒增塑剂—邻苯二甲酸酯的替代品,已经被广泛应用在高分子材料和石油化工等行业.我们综述了近年来固体酸催化合成柠檬酸三丁酯的研究进展,涉及到的催化剂包括固体超强酸、酸性分子筛、固载化杂多酸、碳基固体酸、离子液体,对它们的催化性能和催化机理进行了概述.固体酸克服了传统液体酸腐蚀性强、分离困难、后处理复杂等缺陷.并对固体酸催化剂的发展方向及前景进行了展望. 展开更多
关键词 柠檬酸三丁酯 固体酸 催化剂 酯化 催化机理
下载PDF
上一页 1 2 37 下一页 到第
使用帮助 返回顶部