A Hypothesis Regarding the Origin of Additional Surface Acidity in Solid Complexes with Same Metal Cations

Based on the criteria for additional surface acidity generation in composite oxides and composite fluorides proposed by Tanabe and Kemnitz et al.A hypothesis for the origin of additional surface acidity in solid composites with the same metal cations is proposed.The surface acidsites of We analyze three types of solid composite systems,that is,CrF_(3)/Cr_(2)O_(3),MgF_(2)/MgO,and ZnF_(2)/ZnO,is systematically analyzed,which agrees with experimental results.Accordingly,the origin of additional surface acidity in these solid composites is reasonably explained,and the types of acidic sites are also predicted.

Spatial Variation in CO_(2) Concentration Improves the Simulated Surface Air Temperature Increase in the Northern Hemisphere

The increasing concentration of atmospheric CO_(2) since the Industrial Revolution has affected surface air temperature.However,the impact of the spatial distribution of atmospheric CO_(2) concentration on surface air temperature biases remains highly unclear.By incorporating the spatial distribution of satellite-derived atmospheric CO_(2) concentration in the Beijing Normal University Earth System Model,this study investigated the increase in surface air temperature since the Industrial Revolution in the Northern Hemisphere(NH) under historical conditions from 1976-2005.In comparison with the increase in surface temperature simulated using a uniform distribution of CO_(2),simulation with a nonuniform distribution of CO_(2)produced better agreement with the Climatic Research Unit(CRU) data in the NH under the historical condition relative to the baseline over the period 1901-30.Hemispheric June-July-August(JJA) surface air temperature increased by 1.28℃ ±0.29℃ in simulations with a uniform distribution of CO_(2),by 1.00℃±0.24℃ in simulations with a non-uniform distribution of CO_(2),and by 0.24℃ in the CRU data.The decrease in downward shortwave radiation in the non-uniform CO_(2) simulation was primarily attributable to reduced warming in Eurasia,combined with feedbacks resulting from increased leaf area index(LAI) and latent heat fluxes.These effects were more pronounced in the non-uniform CO_(2)simulation compared to the uniform CO_(2) simulation.Results indicate that consideration of the spatial distribution of CO_(2)concentration can reduce the overestimated increase in surface air temperature simulated by Earth system models.

Impact of climate change and human activities on the spatiotemporal dynamics of surface water area in Gansu Province, China

Understanding the dynamics of surface water area and their drivers is crucial for human survival and ecosystem stability in inland arid and semi-arid areas.This study took Gansu Province,China,a typical area with complex terrain and variable climate,as the research subject.Based on Google Earth Engine,we used Landsat data and the Open-surface Water Detection Method with Enhanced Impurity Control method to monitor the spatiotemporal dynamics of surface water area in Gansu Province from 1985 to 2022,and quantitatively analyzed the main causes of regional differences in surface water area.The findings revealed that surface water area in Gansu Province expanded by 406.88 km2 from 1985 to 2022.Seasonal surface water area exhibited significant fluctuations,while permanent surface water area showed a steady increase.Notably,terrestrial water storage exhibited a trend of first decreasing and then increasing,correlated with the dynamics of surface water area.Climate change and human activities jointly affected surface hydrological processes,with the impact of climate change being slightly higher than that of human activities.Spatially,climate change affected the'source'of surface water to a greater extent,while human activities tended to affect the'destination'of surface water.Challenges of surface water resources faced by inland arid and semi-arid areas like Gansu Province are multifaceted.Therefore,we summarized the surface hydrology patterns typical in inland arid and semi-arid areas and tailored surface water'supply-demand'balance strategies.The study not only sheds light on the dynamics of surface water area in Gansu Province,but also offers valuable insights for ecological protection and surface water resource management in inland arid and semi-arid areas facing water scarcity.

Effect of rare earths surface treatment on tribological properties of carbon fibers reinforced PTFE composite under oil-lubricated condition

The effect of rare earths （RE） surface treatment of carbon fibers （CF） on tribological properties of CF reinforced polytetrafluoroethylene （PTFE） composites under oil-lubricated condition was investigated. Experimental results revealed that RE treated CF reinforced PTFE （CF/PTFE） composite had the lowest friction coefficient and wear under various applied loads and sliding speeds compared with untreated and air-oxidated composites. X-ray photoelectron spectroscopy （XPS） study of carbon fiber surface showed that, after RE treatment, oxygen concentration increased obviously, and the amount of oxygen-containing groups on CF surfaces were largely increased. The increase in the amount of oxygen-containing groups enhanced interfacial adhesion between CF and PTFE matrix. With strong interfacial adhesion of the composite, stress could be effectively transmitted to carbon fibers; carbon fibers were strongly bonded with VITE matrix, and large scale rubbing-off of PTFE be prevented, therefore, tribological properties of the composite was improved.

Surface and Texture Properties of Tb-Doped Ceria-Zirconia Solid Solution Prepared by Sol-Gel Method

The three-way catalysts （TWCs） promoters Ce0.6Zr0.4- x TbxO2-y were prepared by sol-gel method. BET surface areas analysis indicated that an increase of the dopant Tb content from x = 0.05 to x = 0.15 favors an increase of surface area from 66.8 to 80.4 m^2· g^-1 compared with the undoped sample Ce0 .6oZr0.40O2 65.1 m^2·g^- 1 after calcination at 650℃. Transmission electron microscopy （TEM） observation indicated that the doped samples have a higher thermal stability. The XRD and Raman spectra confirmed that the Ce0.6Zr0.4-xTbxO2-y cubic solid solution is formed. XPS analysis revealed that Ce and Tb mainly existed in the form of Ce^4＋ and Tb^3 ＋ , and Zr existed in the form of Zr^4＋ on the surface of the samples. The doped samples were homogenous in composition ; the introduction of Tb into the CeO2-ZrO2 promoters resuited in the formation of a solid solution, and the concentration of surface lattice oxygen was increased.

Understanding the Interactions between Climate Change,Landscape Evolution,Surface Processes and Tectonics in the Earth System:What Can the Studies of Chinese Deserts Contribute?

Due to large deserts on Earth surface a thorough understanding of climate change, landscape evolution and geomorphological processes having occurred in deserts is crucial for Earth System Science. The landscapes in deserts are, however, diverse and different over the globe with regard to their geomorphological nature, human activities and geological histories. In the last decades a great number of efforts have been put to the investigation of the initial timing of the occurrence of arid climate, e. g. in northwestern China. Silty sediments in the downwind directions have been used to deduce the histories of deserts. In general, there is a lack of knowledge about processes and landscapes in Chinese drylands between the initial Miocene silt sedimentation at desert margins and the late Quaternary multiple occurrences of wetter climate with assumed large lakes in many of the deserts in northern China. The geomorphological concept of three primary triggering factors, i.e., the sediment supply, sediment availability and transport capacity of wind, and additionally the underground geology need to be fully considered for a better understanding of the environmental histories of sand seas which should not be viewed as equivalent for deserts because sand seas cover between 〈 1% and ca. 45% of the desert areas in various continents dependent on a complex interaction between various processes of both exogenous and endogenous origins.

A novel surface molecularly imprinted polymer as the solid-phase extraction adsorbent for the selective determination of ampicillin sodium in milk and blood samples

Surface molecularly imprinted polymers （SMIPs） for selective adsorption of ampicillin sodium were synthesized using surface molecular imprinting technique with silica gel as a support. The physical and morphological characteristics of the polymers were investigated by scanning electron microscope （SEM）, Fourier transform infrared spectroscopy （FT-IR）, thermogravimetric analysis （TGA）, elemental analysis and nitrogen adsorption-desorption test. The obtained results showed that the SMIPs displayed great adsorption capacity （13.5 lag/mg）, high recognition ability （the imprinted factor is 3.2） and good binding kinetics for ampicillin sodium. Finally, as solid phase extraction adsorbents, the SMIPs coupled with HPLC method were validated and applied for the enrichment, purification and determination of anapicillin sodium in real milk and blood samples. The averages of spiked accuracy ranged from 92.1% to 107.6%. The relative standard deviations of intra- and inter-day precisions were less than 4.6%. This study provides a new and promising method for enriching, extracting and determining ampicillin sodium in complex biological samples.

GPS and Google Earth based 3D assisted driving system for trucks in surface mines

In order to reduce the number of surface mining accidents related to low visibility conditions and blind spots of trucks and to provide 3D information for truck drivers and real time monitored truck information for the remote dispatcher, a 3D assisted driving system (3D-ADS) based on the GPS, mesh-wireless networks and the Google-Earth engine as the graphic interface and mine-mapping server, was developed at Virginia Tech. The research results indicate that this 3D-ADS system has the potential to increase reliability and reduce uncertainty in open pit mining operations by customizing the local 3D digital mining map, con-structing 3D truck models, tracking vehicles in real time using a 3D interface and indicating available escape routes for driver safety.

Effect of Preparation Method on Surface Area and Crystalline Form of CeO_2-ZrO_2 Solid Solution

The CeO_2-ZrO_2 solid solutions were prepared by a reverse microemulsion method. The effect of preparation parameters on the surface area and crystalline form of the solid solutions were studied by the BET surface area and XRD analysis. The studies indicate that the separation of the microemulsion phase during the preparation procedure can decrease the specific surface area of sample, adding hydrogen peroxide in the matrix solution can increase the specific surface area and stability of sample. The surface area of sample calcined at 550 ℃ for 5 h is 149 m^2·g^(-1), and that calcined at 900 ℃ for 6 h is 88 m^2·g^(-1). The sample with tetragonal symmetry Ce_(0.5)Zr_(0.5)O_2 phase has a higher stability.

SKEWED SYMMETRY DETECTION OF QUADRIC SURFACE SOLIDS UNDER ORTHOGRAPHIC PROJECTION

The skewed symmetry detection plays an improtant role in three-dimensional（3-D） reconstruction. The skewed symmetry depicts a real symmetry viewed from some unknown viewing directions. And the skewed symmetry detection can decrease the geometric constrains and the complexity of 3-D reconstruction. The detection technique for the quadric curve ellipse proposed by Sugimoto is improved to further cover quadric curves including hyperbola and parabola. With the parametric detection, the 3-D quadric curve projection matching is automatical- ly accomplished. Finally, the skewed symmetry surface of the quadric surface solid is obtained. Several examples are used to verify the feasibility of the algorithm and satisfying results can be obtained.

Variations in rare earth elements with environmental factors in lake surface sediments from 17 lakes in western China

Numerous lakes in western China are excellent sites for understanding environmental change.However,what dominates rare earth element(REE) variations are still under debate in the lake environmental research.In this study,we selected 28 surface sediment samples from 17 lakes(i.e.largescale lakes,small water bodies,etc.) in the QinghaiTibet Plateau and Xinjiang area.These samples were analyzed to reveal the behavior of the REEs and major elements.These REE patterns are characterized by light rare earth element(LREE) enrichment,weak Ce anomaly(0.84-0.98,0.94 on average) and negative Eu anomaly(0.53-1.00,0.67 on average).The homogeneous REE patterns may reflect similar REE of the source lithologys.However,the REE abundances showed some significant differences.In this study,water chemistry data analyses inferred that the highly REE values appear possibly in the saltwater lake,and also related to carbonate mineral,whereas p H played a minor role in REE concentrations.In large-scale lakes(e.g.Lake Bosten and Lake Ulungur),the results showed that the relatively larger REE values are in the margins of lakes.Moreover,lower REE contents are towards the central region.Comprehensive study suggested that five major factors control the REE contents:(1) The REE tends to increase with the increase of the weathering intensity.(2) Likewise,heavy mineral(i.e.rutile,anatase,zircon,etc.) are probably primary in these sediments because they are highly enriched in the REE.(3) The contribution of Fe-Mn oxides is significant in sediments because their concentrations highly correlate with the REE.(4) The carbonate mineral(mainly calcite) played a significant role on the REE values in the lakes because the REEs are incorporated into the carbonate minerals generating the low REE concentrations.(5) Major element analysis,mineral analysis,and grain-size data analysis showed that the REE distribution is chiefly influenced by finer grain-size component of lake sediments due to the decreasing proportion of quartz and feldspar than coarser one.Moreover,the clay minerals in finer grain-size sediments can highly absorb the REE.

FORMATION OF GRADIENT COATING OF Fe-BASED ALLOY WITH RARE EARTHS BY PLASMA SURFACING

A gradient coating of Fe-based alloy was manufactured with rare earths (RE) by plasma surfacing on Q235 steel substrate. The coatings were studied by using X-ray diffraction(XRD), scanning electron microscope(SEM), differential thermal analyzer(DTA), and electron probe micro-analyzer (EPMA). The results show that the phases of the two kinds of coatings(with and without RE) both include α-Fe, Fe7C3, Fe3C, Cr2B, Fe2B and FeB. The microstructure of F314 coating is mainly hypereutectic, the pro-phases Cr7C3 and Cr2B are loose, crassi, spiculate and contain microcracks. The brittleness of the coating is high, and the average hardness is 787 HV. When 0.8wt% RE was added into the F314 alloy, the microstructure varied from hypoeutectic to hypereutectic continuously, The hardness appears as gradient distribution with the highest value of 773 HV, meanwhile, the brittleness decreases significantly. The formation of gradient structure depends on the fallowing factors: (i) the conversion of RE. The addition of RE lowers the elements point and Fe-C eutectic temperature, thus the base metal melting acutely. (ii) the heating of plasma arc. Graded temperature results in directional solidification, thus the gradient structure forms easily. The main reasons for the hardness decrease with RE addition in the alloy are the ratio of hard phase lowering and the hardness of the hard phase decreasing.

Rapid and durable oxygen reduction reaction enabled by a perovskite oxide with self-cleaning surface

The growth of electrochemically inert segregation layers on the surface of solid oxide fuel cell cathodes has become a bottleneck restricting the development of perovskite-structured oxygen reduction catalysts.Here,we report a new discovery in which enriched Ba and Fe ions on the near-surface of Nd_(1/2)Ba_(1/2)Co_(1/3)Fe_(1/3)Mn_(1/3)O_(3-δ)spontaneously agglomerate into dispersed Ba_(5)Fe_(2)O_(8) nanoparticles and maintain a highly active and durable perovskite structure on the surface.This unique surface selfcleaning phenomenon is related to the low average potential energy of Ba_(5)Fe_(2)O_(8),which is grown on the near-surface layer.The electrochemically inert Ba_(5)Fe_(2)O_(8) segregation layer on the near-surface of the perovskite catalyst achieves self-cleaning by regulating the formation energy of enriched metal oxides.This self-cleaned perovskite surface exhibits an ultrafast oxygen exchange rate,high catalytic activity for the oxygen reduction reaction,and good adaptability to the actual working conditions of solid oxide fuel cell stacks.This study paves a new way for overcoming the stubborn problem of perovskite catalyst surface deactivation and enriches the scientific knowledge of surface catalysis.

Immersing Treatment of Steel Plate Surface in Steel-Aluminum Solid to Liquid Bonding

The interfacial status of the steel-aluminum solid to liquid bonding plates (their steel plate surfaces were or were not immersed in flux aqueous solution) were measured by using SEM (Scanning Electron Microscope) and X-ray diffraction . The results showed that the layer of flux (the minimum thickness was 15 μm on the steel plate surface) could protect the steel plate surface from oxidizing effectively at high temperature in solid to liquid bonding. The melt temperatUre of the flux should be lower than 580 ℃ so that it could be melted and removed completely. No. 1 flux (patent product made by the author) made up of halogeindes could also force liquid aluminum to infiltrate into steel plate surface and thus the interfacial shear strength of the bonding plate was rather large.

Behaviour of Rare Earths in Solid Solution in Steel

The contents of rare earth metals(REM) in solid solution in 16 Mn steel were determined by means of inductive coupling plasma (ICP) spectroscopy.The amount of REM in solid solution is only a few ppm in the steel with MnS inclusions, which rises slightly with the increasing of REM content in steel.At RE/S>1.9,the MnS inclu- sions in steel disappear completely,the REM con- tent in solid solution increases rapidly with the in- creasing of REM content.The solubility of cerium in 16 Mn steel(st 52)is less than 0.011 wt—％ at room temperature. The results obtained indicate that REM in sol- id solution reduce the amount of pearlite and in- crease that of ferrite and its microhardness.Dis- solved REM oculd increase temperature of critical points,alleviate band structnre and suppress growth of austenite grains.

Surface activity of cancer cells:The fusion of two cell aggregates

A key feature that distinguishes cancer cells from all other cells is their capability to spread throughout the body.Although how cancer cells collectively migrate by following molecular rules which influence the state of cell-cell adhesion contacts has been comprehensively formulated,the impact of physical interactions on cell spreading remains less understood.Cumulative effects of physical interactions exist as the interplay between various physical parameters such as(1)tissue surface tension,(2)viscoelasticity caused by collective cell migration,and(3)solid stress accumulated in the cell aggregate core region.This review aims to point out the role of these physical parameters in cancer cell spreading by considering and comparing the rearrangement of various mono-cultured cancer and epithelial model systems such as the fusion of two cell aggregates.While epithelial cells undergo volumetric cell rearrangement driven by the tissue surface tension,which directs cell movement from the surface to the core region of two-aggregate systems,cancer cells rather perform surface cell rearrangement.Cancer cells migrate toward the surface of the two-aggregate system driven by the solid stress while the surface tension is significantly reduced.The solid stress,accumulated in the core region of the two-aggregate system,is capable of suppressing the movement of epithelial cells that can undergo the jamming state transition;however,this stress enhances the movement of cancer cells.We have focused here on the multi-scale rheological modeling approaches that aimed at reproducing and understanding these biological systems.

FOURIER-TRANSFORM INFRARED SPECTROSCOPIC STUDIES ON THE INTERACTION AMONG MARINE TRACE METAL IONS , SOLID PARTICLES AND ORGANICS Ⅱ. THE STEP WISE CHANGE IN THE SURFACE HYDROXYL GROUPS

IR spectra of Cu (Ⅱ)-marine solid particle systems show that Cu (Ⅱ)-marine solid particle ion exchange causes a stepwise change in the surface H-bonding hydroxyl groups on illite . montmorillonite, CaCO3,r. AlOOH and goethite, but that this does not affect the surface free hydroxyl groups on illite. montmorillonite and CaCO3. and framework hydroxyl group on goethite and on γ- AlOOH . Over the range of Cu(Ⅱ) exchange amounts in the present experiment, four stepwise changes were discovered for the surface H- bonding hydroxyl group on illite. while two stepwise changes were observed on the other marine solids. The interfacial stepwise ion exchange theory was first demonstrated by the above experimental evidence .

Isothermal superplastic solid state bonding of 40Cr and Cr12MoV steels based on surface modification

Based on the feasibility of isothermal superplastic solid state bonding of 40Cr and Cr12MoV steels, the surfaces of both steels to be bonded were ultra-fined through high frequency hardening, then the superplastic solid state bonding were conducted, the microstructure and fracture surface of bonded joint were observed and analysed, and bonding mechanisms was researched. The experimental results show that with the sample surfaces of 4OCr and Cr12MoV steels after the high frequeney hardening, under the prepressing stress of 56. 6 MPa, initidl strain rate of 1.5 × 10^ -2 min^-1 and at the bonding temperature of800 -820℃, the superplastic solid state bonding can be carried out in about 3.5 min, and the joint strength is up to that of 40Cr steel base metal and the radial expansion ratio of the joint does not exceed 6%. The saperplastic solid state bonding parameter of both steels is within the ranges of the isothermal compressive superplastic deformation of Cr12MoV steel, and the deformation in Cr12MoV steel side near the interfacial zone of joint presents the characteristic of superplasticity. In bonding process, the atoms in two sides of joint interface have diffused each other.

Hydroisomerization of n-Pentane over Zn-Fe-S2O8-2/ZrO2-Al2O3 Superacid Catalyst: Activity, Surface Analysis and the Investigation of Deactivation and Regeneration

The Zn and Fe modified /ZrO2-Al2O3 catalyst (Zn-Fe-SZA) was prepared and mechanisms of deactivation and methods for regeneration of as-prepared catalyst were explored with n-pentane isomerization as a probe reaction. The results indicated that the isopentane yield of the fresh Zn-Fe-SZA-F catalyst was about 57% at the beginning of the run, and declined gradually to 50% within 1500 min, then fell rapidly from 50% to 40% between 1500 and 2500 minutes. The deactivation of Zn-Fe-SZA catalyst may be caused by carbon formation on surface of the catalyst, sulfate group attenuation owing to reduction by hydrogen, removal of sulfur species and the loss of strong acid sites. It was found that the initial catalytic activity over Zn-Fe-SZA-T catalyst was 48%, which recovered by 84.3% as compared to that of fresh catalyst (57%). However, it showed a sharp decrease in isopentane yield from 48% to 29% within 1500 minutes, showing poor stability. This is associated to the loss of acidity caused by removal of sulfur species cannot be basically restored by thermal treatment. Resulfating the calcined catalyst could improve the acidity of catalyst significantly, especially strong acid sites, as compared with the calcined sample. The improved stability of the resulfated catalyst can be explained by: 1) eliminaton of carbon deposition to some extent by calcination process, 2) formation of improved acidic nature by re-sulfation, favoring isomerization on acidic sites, 3) restructuring of the acid and metal sites via the calcination-re-sulfation procedure.