A critical review on composite solid electrolytes for lithium batteries:Design strategies and interface engineering

The rapid development of new energy vehicles and 5G communication technologies has led to higher demands for the safety,energy density,and cycle performance of lithium-ion batteries as power sources.However,the currently used liquid carbonate compounds in commercial lithium-ion battery electrolytes pose potential safety hazards such as leakage,swelling,corrosion,and flammability.Solid electrolytes can be used to mitigate these risks and create a safer lithium battery.Furthermore,high-energy density can be achieved by using solid electrolytes along with high-voltage cathode and metal lithium anode.Two types of solid electrolytes are generally used:inorganic solid electrolytes and polymer solid electrolytes.Inorganic solid electrolytes have high ionic conductivity,electrochemical stability window,and mechanical strength,but suffer from large solid/solid contact resistance between the electrode and electrolyte.Polymer solid electrolytes have good flexibility,processability,and contact interface properties,but low room temperature ionic conductivity,necessitating operation at elevated temperatures.Composite solid electrolytes(CSEs) are a promising alternative because they offer light weight and flexibility,like polymers,as well as the strength and stability of inorganic electrolytes.This paper presents a comprehensive review of recent advances in CSEs to help researchers optimize CSE composition and interactions for practical applications.It covers the development history of solid-state electrolytes,CSE properties with respect to nanofillers,morphology,and polymer types,and also discusses the lithium-ion transport mechanism of the composite electrolyte,and the methods of engineering interfaces with the positive and negative electrodes.Overall,the paper aims to provide an outlook on the potential applications of CSEs in solid-state lithium batteries,and to inspire further research aimed at the development of more systematic optimization strategies for CSEs.

In-situ polymerized PEO-based solid electrolytes contribute better Li metal batteries:Challenges,strategies,and perspectives

Polyethylene oxide(PEO)-based solid polymer electrolytes(SPEs)with good electrochemical stability and excellent Li salt solubility are considered as one of the most promising SPEs for solid-state lithium metal batteries(SSLMBs).However,PEO-based SPEs suffer from low ionic conductivity at room temperature and high interfacial resistance with the electrodes due to poor interfacial contact,seriously hindering their practical applications.As an emerging technology,in-situ polymerization process has been widely used in PEO-based SPEs because it can effectively increase Li-ion transport at the interface and improve the interfacial contact between the electrolyte and electrodes.Herein,we review recent advances in design and fabrication of in-situ polymerized PEO-based SPEs to realize enhanced performance in LMBs.The merits and current challenges of various SPEs,as well as their stabilizing strategies are presented.Furthermore,various in-situ polymerization methods(such as free radical polymerization,cationic polymerization,anionic polymerization)for the preparation of PEO-based SPEs are summarized.In addition,the application of in-situ polymerization technology in PEO-based SPEs for adjustment of the functional units and addition of different functional filler materials was systematically discussed to explore the design concepts,methods and working mechanisms.Finally,the challenges and future prospects of in-situ polymerized PEO-based SPEs for SSLMBs are also proposed.

Rational Design of High-Performance PEO/Ceramic Composite Solid Electrolytes for Lithium Metal Batteries

Composite solid electrolytes(CSEs)with poly(ethylene oxide)(PEO)have become fairly prevalent for fabricating high-performance solid-state lithium metal batteries due to their high Li~+solvating capability,flexible processability and low cost.However,unsatisfactory room-temperature ionic conductivity,weak interfacial compatibility and uncontrollable Li dendrite growth seriously hinder their progress.Enormous efforts have been devoted to combining PEO with ceramics either as fillers or major matrix with the rational design of two-phase architecture,spatial distribution and content,which is anticipated to hold the key to increasing ionic conductivity and resolving interfacial compatibility within CSEs and between CSEs/electrodes.Unfortunately,a comprehensive review exclusively discussing the design,preparation and application of PEO/ceramic-based CSEs is largely lacking,in spite of tremendous reviews dealing with a broad spectrum of polymers and ceramics.Consequently,this review targets recent advances in PEO/ceramicbased CSEs,starting with a brief introduction,followed by their ionic conduction mechanism,preparation methods,and then an emphasis on resolving ionic conductivity and interfacial compatibility.Afterward,their applications in solid-state lithium metal batteries with transition metal oxides and sulfur cathodes are summarized.Finally,a summary and outlook on existing challenges and future research directions are proposed.

Synthesis and Conductivity Characterization of Anti-Perovskite Na3OX Solid Electrolytes for All Solid Na-Ion Batteries

Solid electrolytes for all solid sodium-ion batteries have been attracting much attention as an alternative energy storage system, which have the advantage of being extremely safe because it can be charged quickly and is nonflammable. We have synthesized anti-perovskite type Na3OX (X = Br, and I) electrolytes with high purity, by reactions of halogen mixtures with sodium oxides. After mixing, it was filled in an alumina crucible and heated for 6 hours at 330°C. It was confirmed that a large crystal strain was introduced by eutectication, which might reduce the activation energy of Na ion conduction and lead to an improvement of the conductivity. A relatively higher ionic conductivity of σ = 1.55 × 10-7 S/cm at 60°C has been obtained for Na3OBr0.6I0.4, which is about three orders higher than that in literature. A different ratio of X (X = Br, I) ions was added into sodium oxide to make the Na3OX crystal. The influence of strain introduction on optimizing the bottleneck and improving the conductivity was discussed.

All-solid-state lithium batteries with inorganic solid electrolytes:Review of fundamental science

The scientific basis of all-solid-state lithium batteries with inorganic solid electrolytes is reviewed briefly, touching upon solid electrolytes, electrode materials, electrolyte/electrode interface phenomena, fabrication, and evaluation. The challenges and prospects are outlined as well.

Progress of Solid Electrolytes and the Electrochemical Sensors

Four types of solid state electrochemical sensors and their general principles are introduced in the paper. The novel type-IV sensors developed in the last few years are emphasized to study hereafter. The ways to design new electrochemical sensors and the directions to develop new solid electrolytes for new electrochemical sensors are also discussed.

Nuclear magnetic resonance studies of organic-inorganic composite solid electrolytes

Solid electrolytes have received widespread attention due to their higher safety than liquid electrolytes in the past decades.In particular,organic-inorganic composite solid electro-lytes(CSEs)in which inorganic fllers dispersed in polymer solid electrolytes are consid-ered to be one of the most promising candidate electrolytes for high-performance solid-state lithium batteries.Understanding the local environments and the conduction pathway/dynamics of Lit is essential for the design of high-performance CSEs.Nuclear magnetic resonance(NMR)is a non-invasive quantitative technique that has unique ca-pabilities in providing molecular structure information,morphological evolution,and measuring the movement of ions at different time scales.Therefore,for battery re-searchers,an accurate and comprehensive under standing of the basic principles and experimental design of solid-state NMR(SSNMR)is of great significance for investigating the abundant molecular structure and dynamics information in CSEs.The specific appli-cations of the SSNMR technique in CSEs are briefly introduced in this present review.

Improving ionic conductivity of polymer-based solid electrolytes for lithium metal batteries

Because of its superior safety and excellent processability,solid polymer electrolytes(SPEs)have attracted widespread attention.In lithium based batteries,SPEs have great prospects in replacing leaky and flammable liquid electrolytes.However,the low ionic conductivity of SPEs cannot meet the requirements of high energy density systems,which is also an important obstacle to its practical application.In this respect,escalating charge carriers(i.e.Li^(+))and Li^(+)transport paths are two major aspects of improving the ionic conductivity of SPEs.This article reviews recent advances from the two perspectives,and the underlying mechanism of these proposed strategies is discussed,including increasing the Li^(+)number and optimizing the Li^(+)transport paths through increasing the types and shortening the distance of Li^(+)transport path.It is hoped that this article can enlighten profound thinking and open up new ways to improve the ionic conductivity of SPEs.

Development of Doped Lanthanum Gallate Solid Electrolytes

Development of the doped lanthanum gallate solid electrolytes in the recent years was reviewed. The structure and oxygen ion transference mechanism were discussed. Effects of alkali earths, transition metals, and impurities on electrical conductivity of the doped lanthanum gallates were also discussed. The applications of doped lanthanum gallate were described. The current problems and corresponding strategies were explored.

In situ Observation of Li Deposition-Induced Cracking in Garnet Solid Electrolytes

Lithium(Li)penetration through solid electrolytes(SEs)induces short circuits in Li solid-state batteries(SSBs),which is a critical issue that hinders the development of high energy density SSBs.While cracking in ceramic SEs has been often shown to accompany Li penetration,the interplay between Li deposition and cracking remains elusive.Here,we constructed a mesoscale SSB inside a focused ion beam-scanning electron microscope(FIB-SEM)for in situ observation of Li deposition-induced cracking in SEs at nanometer resolution.Our results revealed that Li propagated predominantly along transgranular cracks in a garnet Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO).Cracks appeared to initiate from the interior of LLZTO beneath the electrode surface and then propagated by curving toward the LLZTO surface.The resulting bowl-shaped cracks resemble those from hydraulic fracture caused by high fluid pressure on the surface of internal cracks,suggesting that the Li deposition-induced pressure is the major driving force of crack initiation and propagation.The high pressure generated by Li deposition is further supported by in situ observation of the flow of filled Li between the crack flanks,causing crack widening and propagation.This work unveils the dynamic interplay between Li deposition and cracking in SEs and provides insight into the mitigation of Li dendrite penetration in SSBs.

A panoramic view of Li_(7)P_(3)S_(11) solid electrolytes synthesis, structural aspects and practical challenges for all-solid-state lithium batteries

The development of an inorganic electrochemical stable solid-state electrolyte is essentially responsible for future state-of-the-art all-solid-state lithium batteries(ASSLBs).Because of their advantages in safety,working temperature,high energy density,and packaging,ASSLBs can develop an ideal energy storage system for modern electric vehicles(EVs).A solid electrolyte(SE)model must have an economical synthesis approach,exhibit electrochemical and chemical stability,high ionic conductivity,and low interfacial resistance.Owing to its highest conductivity of 17 mS·cm^(-1),and deformability,the sulfide-based Li_(7)P_(3)S_(11) solid electrolyte is a promising contender for the high-performance bulk type of ASSLBs.Herein,we present a current glimpse of the progress of synthetic procedures,structural aspects,and ionic conductivity improvement strategies.Structural elucidation and mechanistic approaches have been extensively discussed by using various characterization techniques.The chemical stability of Li_(7)P_(3)S_(11) could be enhanced via oxide doping,and hard and soft acid/base(HSAB)concepts are also discussed.The issues to be undertaken for designing the ideal solid electrolytes,interfacial challenges,and high energy density have been discoursed.This review aims to provide a bird’s eye view of the recent development of Li_(7)P_(3)S_(11)-based solid-state electrolyte applications and explore the strategies for designing new solid electrolytes with a target-oriented approach to enhance the efficiency of high energy density allsolid-state lithium batteries.

Tuning hybrid liquid/solid electrolytes by lowering Li salt concentration for lithium batteries

Hybrid liquid/solid electrolytes（HLSEs） consisting of conventional organic liquid electrolyte（LE）, polyacrylonitrile（PAN）, and ceramic lithium ion conductor Li（1.5）Al（0.5）Ge（1.5）（PO4）3（LAGP） are proposed and investigated. The HLSE has a high ionic conductivity of over 2.25 × 10^（-3） S/cm at 25？C, and an extended electrochemical window of up to 4.8 V versus Li/Li＋. The Li｜HLSE｜Li symmetric cells and Li｜HLSE｜Li FePO4 cells exhibit small interfacial area specific resistances（ASRs） comparable to that of LE while much smaller than that of ceramic LAGP electrolyte, and excellent performance at room temperature. Bis（trifluoromethane sulfonimide） salt in HLSE significantly affects the properties and electrochemical behaviors. Side reactions can be effectively suppressed by lowering the concentration of Li salt. It is a feasible strategy for pursuing the high energy density batteries with higher safety.

Space Charge Layer Eff ect in Sulfide Solid Electrolytes in All-Solid-State Batteries: In-situ Characterization and Resolution

All-solid-state lithium batteries(ASSLBs)have advantages of safety and high energy density,and they are expected to become the next generation of energy storage devices.Sulfide-based solid-state electrolytes(SSEs)with high ionic conduc-tivity and low grain boundary resistance exhibit remarkable practical application.However,the space charge layer(SCL)eff ect and high interfacial resistance caused by a mismatch with the current commercial oxide cathodes restrict the develop-ment of sulfide SSEs and ASSLBs.This review summarizes the research progress on the SCL eff ect of sulfide SSEs and oxide cathodes,including the mechanism and direct evidence from high performance in-situ characterizations,as well as recent progress on the interfacial modification strategies to alleviate the SCL eff ect.This study provides future direction to stabilize the high performance sulfide-based solid electrolyte/oxide cathode interface for state-of-the-art ASSLBs and future all-SSE storage devices.

Incombustible solid polymer electrolytes:A critical review and perspective

Since the advent of the solid-state batteries,employing solid polymer electrolytes(SPEs)to replace routine flammable liquid electrolytes is regarded to be one of the most promising solutions in pursing highenergy-density battery systems.SPEs with superior thermal stability,good processability,and high mechanical modulus obtain increasing attentions.However,SPE-based batteries are not impenetrable due to their decomposition and combustibility under extreme conditions.Researchers believe incorporating appropriate flame-retardant additives/solvents/fragments into SPEs can intrinsically reduce their flammability to solve the battery safety issues.In this review,the recent research progress of incombustible SPEs,with special emphasis on flame-retardant structural design,is summarized.Specifically,a brief introduction of flame-retardant mechanism,evaluation index for safety of SPEs,and a detailed overview of the latest advances on diverse-types SPEs in various battery systems are highlighted.The deep insight into thermal ru naway process,the free-standing incombustible GPEs,and the ratio nal design of pouch cell structures may be the main directions to motivate revolutionary next-generation for safety batteries.

Unique double-layer solid electrolyte interphase formed with fluorinated ether-based electrolytes for high-voltage lithium metal batteries

Li metal batteries using high-voltage layered oxides cathodes are of particular interest due to their high energy density.However,they suffer from short lifespan and extreme safety concerns,which are attributed to the degradation of layered oxides and the decomposition of electrolyte at high voltage,as well as the high reactivity of metallic Li.The key is the development of stable electrolytes against both highvoltage cathodes and Li with the formation of robust interphase films on the surfaces.Herein,we report a highly fluorinated ether,1,1,1-trifluoro-2-[(2,2,2-trifluoroethoxy)methoxy]ethane(TTME),as a cosolvent,which not only functions as a diluent forming a localized high concentration electrolyte(LHCE),but also participates in the construction of the inner solvation structure.The TTME-based electrolyte is stable itself at high voltage and induces the formation of a unique double-layer solid electrolyte interphase(SEI)film,which is embodied as one layer rich in crystalline structural components for enhanced mechanical strength and another amorphous layer with a higher concentration of organic components for enhanced flexibility.The Li||Cu cells display a noticeably high Coulombic efficiency of 99.28%after 300 cycles and Li symmetric cells maintain stable cycling more than 3200 h at 0.5 mA/cm^(2) and 1.0m Ah/cm^(2).In addition,lithium metal cells using LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) and Li CoO_(2) cathodes(both loadings~3.0 m Ah/cm^(2))realize capacity retentions of>85%over 240 cycles with a charge cut-off voltage of 4.4 V and 90%for 170 cycles with a charge cut-off voltage of 4.5 V,respectively.This study offers a bifunctional ether-based electrolyte solvent beneficial for high-voltage Li metal batteries.

Overcoming the Na-ion conductivity bottleneck for the cost-competitive chloride solid electrolytes

Chloride solid electrolytes possess multiple advantages for the construction of safe,energy-dense allsolid-state sodium batteries,but presently the chlorides with sufficiently high cost-competitiveness for commercialization almost all exhibit low Na-ion conductivities of around 10^(-5)S cm^(-1)or lower.Here,we report a chloride solid electrolyte,Na_(2.7)ZFCl_(5.3)O_(0.7),which reaches a Na-ion conductivity of2.29×10^(-4)S cm^(-1)at 25℃without involving overly expensive raw materials such as rare-earth chlorides or Na_(2)S.In addition to the efficient ion transport,Na_(2.7)ZrCl_(5.3)O_(0.7)also shows an excellent deformability surpassing that of the widely studied Na_(3)PS_(4),Na_(3)SbS_(4),and Na_(2)ZrCl_(6)solid electrolytes.The combination of these advantages allows the all-solid-state cell based on Na_(2.7)ZrCl_(5.3)O_(0.7)and NaCrO_(2)to realize stable room-temperature cycling at a much higher specific current than those based on other non-viscoelastic chloride solid electrolytes in literature(120 mA g^(-1)vs.12-55 mA g^(-1));after 100 cycles at such a high rate,the Na_(2.7)ZFCl_(5.3)O_(0.7)-based cell can still deliver a discharge capacity of 80 mAh g^(-1)at25℃.

Strategies for fitting accurate machine-learned inter-atomic potentials for solid electrolytes

Ion transport in materials is routinely probed through several experimental techniques,which introduce variability in reported ionic diffusivities and conductivities.The computational prediction of ionic diffusivities and conductivities helps in identifying good ionic conductors,and suitable solid electrolytes(SEs),thus establishing firm structure-property relationships.Machine-learned potentials are an attractive strategy to extend the capabilities of accurate ab initio molecular dynamics(AIMD)to longer simulations for larger systems,enabling the study of ion transport at lower temperatures.However,machine-learned potentials being in their infancy,critical assessments of their predicting capabilities are rare.Here,we identified the main factors controlling the quality of a machine-learning potential based on the moment tensor potential formulation,when applied to the properties of ion transport in ionic conductors,such as SEs.Our results underline the importance of high-quality and diverse training sets required to fit moment tensor potentials.We highlight the importance of considering intrinsic defects which may occur in SEs.We demonstrate the limitations posed by short-timescale and high-temperature AIMD simulations to predict the room-temperature properties of materials.

Lithium-site substituted argyrodite-type Li_(6)PS_(5)I solid electrolytes with enhanced ionic conduction for all-solid-state batteries

Argyrodites,Li_(6)PS_(5)X(X=Cl,Br,I),have piqued the interest of researchers by offering promising lithium ionic conductivity for their application in all-solid-state batteries(ASSBs).However,other than Li_(6)PS_(5)Cl(651Cl)and Li_(6)PS_(5)Br(651Br),Li_(6)PS_(5)I(651I)shows poor ionic conductivity(10^(-7)S cm^(-1)at 298 K).Herein,we present Al-doped 651I with I^(-)/S^(2-)site disordering to lower activation energy(Ea)and improve ionic conductivity.They formed argyrodite-type solid solutions with a composition of(Li_(6–3x)Al_(x))PS_(5)I in 0≤x≤0.10,and structural analysis revealed that Al^(3+)is located at Li sites.Also,the Al-doped samples contained anion I^(-)/S^(2-)site disorders in the crystal structures and smaller lattice parameters than the non-doped samples.Impedance spectroscopy measurements indicated that Al-doping reduced the ionic diffusion barrier,Ea,and increased the ionic conductivity to 10^(-5)S cm^(-1);the(Li5.7Al0.1)PS5I had the highest ionic conductivity in the studied system,at 2.6×10^(-5)S cm^(-1).In a lab-scale ASSB,with(Li_(5.7)Al_(0.1))PS_(5)I functioned as a solid electrolyte,demonstrating the characteristics of a pure ionic conductor with negligible electronic conductivity.The evaluated ionic conduction is due to decreased Li+content and I^(-)/S^(2-)disorder formation.Li-site cation doping enables an in-depth understanding of the structure and provides an additional approach to designing betterperforming SEs in the argyrodite system.

Evaluation of solid electrolytes: Development of conventional and interdisciplinary approaches

Solid-state lithium batteries(SSLBs)have received considerable attention due to their advantages in thermal stability,energy density,and safety.Solid electrolyte(SE)is a key component in developing high-performance SSLBs.An in-depth understanding of the intrinsic bulk and interfacial properties is imperative to achieve SEs with competitive performance.This review first introduces the traditional electrochemical approaches to evaluating the fundamental parameters of SEs,including the ionic and electronic conductivities,activation barrier,electrochemical stability,and diffusion coefficient.After that,the characterization techniques to evaluate the structural and chemical stability of SEs are reviewed.Further,emerging interdisciplinary visualization techniques for SEs and interfaces are highlighted,including synchrotron X-ray tomography,ultrasonic scanning imaging,time-of-flight secondary-ion mass spectrometry,and three-dimensional stress mapping,which improve the understanding of electrochemical performance and failure mechanisms.In addition,the application of machine learning to accelerate the screening and development of novel SEs is introduced.This review article aims to provide an overview of advanced characterization from a broad physical chemistry view,inspiring innovative and interdisciplinary studies in solid-state batteries.

Synergistic coupling among Mg_(2)B_(2)O_(5),polycarbonate and N,Ndimethylformamide enhances the electrochemical performance of PVDF-HFP-based solid electrolyte

Polymer solid electrolytes(SPEs)based on the[solvate-Li+]complex structure have promising prospects in lithium metal batteries(LMBs)due to their unique ion transport mechanism.However,the solvation structure may compromise the mechanical performance and safety,hindering practical application of SPEs.In this work,a composite solid electrolyte(CSE)is designed through the organic-inorganic syner-gistic interaction among N,N-dimethylformamide(DMF),polycarbonate(PC),and Mg_(2)B_(2)O_(5) in poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP).Flame-retardant Mg_(2)B_(2)O_(5) nanowires provide non-flammability to the prepared CSEs,and the addition of PC improves the dispersion of Mg_(2)B_(2)O_(5) nanowires.Simultaneously,the organic-inorganic synergistic action of PC plasticizer and Mg_(2)B_(2)O_(5) nanowires pro-motes the dissociation degree of LiTFSI and reduces the crystallinity of PVDF-HFP,enabling rapid Li ion transport.Additionally,Raman spectroscopy and DFT calculations confirm the coordination between Mg atoms in Mg_(2)B_(2)O_(5) and N atoms in DMF,which exhibits Lewis base-like behavior attacking adjacent C-F and C-H bonds in PVDF-HFP while inducing dehydrofluorination of PVDF-HFP.Based on the syner-gistic coupling of Mg_(2)B_(2)O_(5),PC,and DMF in the PVDF-HFP matrix,the prepared CSE exhibits superior ion conductivity(9.78×10^(-4) s cm^(-1)).The assembled Li symmetric cells cycle stably for 3900 h at a current density of 0.1 mA cm^(-2) without short circuit.The LFP||Li cells assembled with PDL-Mg_(2)B_(2)O_(5)/PC CSEs show excellent rate capability and cycling performance,with a capacity retention of 83.3%after 1000 cycles at 0.5 C.This work provides a novel approach for the practical application of organic-inorganic Synergistic CSEs in LMBs.