Arc fault detection is desperately required in Solid State Power Controllers（SSPC） in addition to their fundamental functions because arcs will provoke growing harm and threat to aircraft safety. Experimental study ...Arc fault detection is desperately required in Solid State Power Controllers（SSPC） in addition to their fundamental functions because arcs will provoke growing harm and threat to aircraft safety. Experimental study has been done to obtain the faulted current data. In order to improve the detection speed and accuracy, two fast arc fault detection methods have been proposed in this paper with the analysis of only half cycle data. Both Fast Fourier Transform（FFT） and Wavelet Packets Decomposition（WPD） have been adopted to distinguish arc fault currents from normal operation currents. Analysis results show that Alternating Current（AC） arcs can be effectively and accurately detected with the proposed half cycle data based methods. Moreover,experimental verification results have also been provided.展开更多
The new 1 kW power module for ADS project needs the optimization of cooling design including water flow and tunnel layout, and the water flow of three tons per hour was chosen to be a goal for a 20 kW power source.Acc...The new 1 kW power module for ADS project needs the optimization of cooling design including water flow and tunnel layout, and the water flow of three tons per hour was chosen to be a goal for a 20 kW power source.According to analysis from the insertion and integrated loss, about 24 modules were integrated into the rated power. Thus, every module has a cooling flow of 2.1 L/min for RF heat load and power supply loss, which is very hard to achieve if no special consideration and techniques. A new thermal simulation method was introduced for thermal analysis of cooling plate through CST multi-physics suite,especially for temperature of power LDMOS transistor.Some specific measures carried out for the higher heat transfer were also presented in this paper.展开更多
Electrode material based on a novel core–shell structure consisting of NiCoS（NCS） solid fiber core and Mn S（MS） sheet shell（NCS@MS） in situ grown on carbon cloth（CC） has been successfully prepared by a simple...Electrode material based on a novel core–shell structure consisting of NiCoS（NCS） solid fiber core and Mn S（MS） sheet shell（NCS@MS） in situ grown on carbon cloth（CC） has been successfully prepared by a simple sulfurization-assisted hydrothermal method for high performance supercapacitor. The synthesized NiCoS@Mn S/CC electrode shows high capacitance of 1908.3 F gat a current density of 0.5 A gwhich is higher than those of NiCoSand Mn S at the same current density. A flexible all-solid-state asymmetric supercapacitor（ASC） is constructed by using NiCoS@Mn S/CC as positive electrode, active carbon/CC as negative electrode and KOH/poly（vinyl alcohol）(PVA) as electrolyte. The optimized ASC shows a maximum energy density of 23.3 Wh kgat 1 A g, a maximum power density of about7.5 kw kgat 10 A gand remarkable cycling stability. After 9000 cycles, the ASC still exhibited67.8% retention rate and largely unchanged charge/discharge curves. The excellent electrochemical properties are resulted from the novel core–shell structure of the NiCoS@Mn S/CC electrode, which possesses both high surface area for Faraday redox reaction and superior kinetics of charge transport. The NiCoS@Mn S/CC electrode shows a promising potential for energy storage applications in the future.展开更多
In this paper,we present the general design methods and parameter measurements of a 1-k W solidstate radio frequency(RF) power amplifier at 2856 MHz,for the soft X-ray free electron laser facility.Three-stage amplific...In this paper,we present the general design methods and parameter measurements of a 1-k W solidstate radio frequency(RF) power amplifier at 2856 MHz,for the soft X-ray free electron laser facility.Three-stage amplification with a 4-way combination is used.An RF switch module is integrated with the solid-state RF power amplifier to convert the continuous wave(CW) signal into pulse signal,with adjustable pulse width.The power gain is measured at 57.7 d B at 60 d Bm output.The RF phase noise,which is measured by the low-level RF system,is\0.015 degree(RMS),while the pulse frontier jitter is\5 ns.展开更多
For an all solid-state Marx modulator applied in dielectric barrier discharges（DBDs）,hard switching results in a very low efficiency.In this paper,a series resonant soft switching circuit,which series an inductance ...For an all solid-state Marx modulator applied in dielectric barrier discharges（DBDs）,hard switching results in a very low efficiency.In this paper,a series resonant soft switching circuit,which series an inductance with DBD capacitor,is proposed to reduce the power loss.The power loss of the all circuit status with hard switching was analyzed,and the maximum power loss occurred during discharging at the rising and falling edges.The power loss of the series resonant soft switching circuit was also presented.A comparative analysis of the two circuits determined that the soft switching circuit greatly reduced power loss.The experimental results also demonstrated that the soft switching circuit improved the power transmission efficiency of an all solid-state Marx modulator for DBDs by up to 3 times.展开更多
固态功率控制器SSPC(solid-state power controller)中功率管的结温监测对SSPC的可靠性有至关重要的作用,热模型法因其无需直接接触测量且方法简单而被广泛使用。然而,功率芯片的老化会导致热路径的退化,器件的结壳热阻抗增加,使实际结...固态功率控制器SSPC(solid-state power controller)中功率管的结温监测对SSPC的可靠性有至关重要的作用,热模型法因其无需直接接触测量且方法简单而被广泛使用。然而,功率芯片的老化会导致热路径的退化,器件的结壳热阻抗增加,使实际结温远远超过热网络模型的估计值,导致对器件健康状态的乐观估计。焊料层疲劳失效被认为是SSPC功率管老化失效的主要原因之一。因此,在SSPC的寿命周期中实时监测器件的老化状态,并对功率管的热模型进行自适应在线修正,通过测量不受焊料层退化影响的热敏参数来计算热阻作为更新依据,将热阻信息关联焊料层老化状态来更新热模型。所提方法可在不影响SSPC正常工作的前提下,实时修正热模型,实验结果验证了方法的有效性。展开更多
针对分布式电源并网引起的双向潮流导致网损增大以及分布式电源、负荷的波动导致节点电压波动等问题,文章基于固态变压器(Solid State Transformer,SST)两侧电力电子变换器的脉冲宽度调制技术,提出了一种控制潮流的方法。该方法首先建...针对分布式电源并网引起的双向潮流导致网损增大以及分布式电源、负荷的波动导致节点电压波动等问题,文章基于固态变压器(Solid State Transformer,SST)两侧电力电子变换器的脉冲宽度调制技术,提出了一种控制潮流的方法。该方法首先建立了含SST的有源配电网动态无功优化模型;然后以多时刻的有功网损和电压波动为优化目标,采用改进多目标粒子群算法对SST的一、二次侧的电力电子变换器的调制角和调制系数等多个控制变量进行求解;最后建立仿真模型并与基于有载调压变压器的有源配电网动态无功优化方法进行比较。结果证明了所提方法在降低配电网网损和维持节点电压稳定方面的优越性。展开更多
将模块化多电平变流器(modular multilevel converter,MMC)投入到固态变压器(solid state transformer,SST)系统中时通常采用比例积分微分(proportional integral derivative,PID)控制方法,但这种策略存在参数选取繁杂、动态性能较差的...将模块化多电平变流器(modular multilevel converter,MMC)投入到固态变压器(solid state transformer,SST)系统中时通常采用比例积分微分(proportional integral derivative,PID)控制方法,但这种策略存在参数选取繁杂、动态性能较差的缺点。为了提高系统的动态性能并简化参数选取,提出了MMC-SST反馈线性化滑模控制策略。首先建立了MMC-SST整体仿真模型。然后建立了采用反馈线性化滑模控制的MMC-SST控制模型。最后利用MATLAB/Simulink平台将所提的控制方法与常规PID控制策略作了仿真比较,验证了所提反馈线性化滑模控制策略具备参数选择容易、动态性能优良的优势。展开更多
基金co-supported by the National Natural Science Foundation of China(Nos.51407144 and 51777169)the Aviation Research Funds(No.20164053029)+1 种基金the Fundamental Research Funds for the Central Universities(Nos.3102017ZY027 and 3102017GX08001)the Young Elite Scientist Sponsorship Program by CAST
文摘Arc fault detection is desperately required in Solid State Power Controllers（SSPC） in addition to their fundamental functions because arcs will provoke growing harm and threat to aircraft safety. Experimental study has been done to obtain the faulted current data. In order to improve the detection speed and accuracy, two fast arc fault detection methods have been proposed in this paper with the analysis of only half cycle data. Both Fast Fourier Transform（FFT） and Wavelet Packets Decomposition（WPD） have been adopted to distinguish arc fault currents from normal operation currents. Analysis results show that Alternating Current（AC） arcs can be effectively and accurately detected with the proposed half cycle data based methods. Moreover,experimental verification results have also been provided.
基金supported by the ‘‘strategic priority research program’’ of the Chinese Academy of Sciences(No.XDA030205)
文摘The new 1 kW power module for ADS project needs the optimization of cooling design including water flow and tunnel layout, and the water flow of three tons per hour was chosen to be a goal for a 20 kW power source.According to analysis from the insertion and integrated loss, about 24 modules were integrated into the rated power. Thus, every module has a cooling flow of 2.1 L/min for RF heat load and power supply loss, which is very hard to achieve if no special consideration and techniques. A new thermal simulation method was introduced for thermal analysis of cooling plate through CST multi-physics suite,especially for temperature of power LDMOS transistor.Some specific measures carried out for the higher heat transfer were also presented in this paper.
基金supported by the Grant-in-Aid for Scientific Research (KAKENHI) program, Japan (C, Grant Number 15K05597)Takahashi Industrial and Economic Research Foundation (Takahashi Grant Number 06-003-154)
文摘Electrode material based on a novel core–shell structure consisting of NiCoS（NCS） solid fiber core and Mn S（MS） sheet shell（NCS@MS） in situ grown on carbon cloth（CC） has been successfully prepared by a simple sulfurization-assisted hydrothermal method for high performance supercapacitor. The synthesized NiCoS@Mn S/CC electrode shows high capacitance of 1908.3 F gat a current density of 0.5 A gwhich is higher than those of NiCoSand Mn S at the same current density. A flexible all-solid-state asymmetric supercapacitor（ASC） is constructed by using NiCoS@Mn S/CC as positive electrode, active carbon/CC as negative electrode and KOH/poly（vinyl alcohol）(PVA) as electrolyte. The optimized ASC shows a maximum energy density of 23.3 Wh kgat 1 A g, a maximum power density of about7.5 kw kgat 10 A gand remarkable cycling stability. After 9000 cycles, the ASC still exhibited67.8% retention rate and largely unchanged charge/discharge curves. The excellent electrochemical properties are resulted from the novel core–shell structure of the NiCoS@Mn S/CC electrode, which possesses both high surface area for Faraday redox reaction and superior kinetics of charge transport. The NiCoS@Mn S/CC electrode shows a promising potential for energy storage applications in the future.
文摘In this paper,we present the general design methods and parameter measurements of a 1-k W solidstate radio frequency(RF) power amplifier at 2856 MHz,for the soft X-ray free electron laser facility.Three-stage amplification with a 4-way combination is used.An RF switch module is integrated with the solid-state RF power amplifier to convert the continuous wave(CW) signal into pulse signal,with adjustable pulse width.The power gain is measured at 57.7 d B at 60 d Bm output.The RF phase noise,which is measured by the low-level RF system,is\0.015 degree(RMS),while the pulse frontier jitter is\5 ns.
基金supported by the Engineering Research Center of Advanced Lighting Technology Ministry of Education
文摘For an all solid-state Marx modulator applied in dielectric barrier discharges（DBDs）,hard switching results in a very low efficiency.In this paper,a series resonant soft switching circuit,which series an inductance with DBD capacitor,is proposed to reduce the power loss.The power loss of the all circuit status with hard switching was analyzed,and the maximum power loss occurred during discharging at the rising and falling edges.The power loss of the series resonant soft switching circuit was also presented.A comparative analysis of the two circuits determined that the soft switching circuit greatly reduced power loss.The experimental results also demonstrated that the soft switching circuit improved the power transmission efficiency of an all solid-state Marx modulator for DBDs by up to 3 times.
文摘固态功率控制器SSPC(solid-state power controller)中功率管的结温监测对SSPC的可靠性有至关重要的作用,热模型法因其无需直接接触测量且方法简单而被广泛使用。然而,功率芯片的老化会导致热路径的退化,器件的结壳热阻抗增加,使实际结温远远超过热网络模型的估计值,导致对器件健康状态的乐观估计。焊料层疲劳失效被认为是SSPC功率管老化失效的主要原因之一。因此,在SSPC的寿命周期中实时监测器件的老化状态,并对功率管的热模型进行自适应在线修正,通过测量不受焊料层退化影响的热敏参数来计算热阻作为更新依据,将热阻信息关联焊料层老化状态来更新热模型。所提方法可在不影响SSPC正常工作的前提下,实时修正热模型,实验结果验证了方法的有效性。
文摘针对分布式电源并网引起的双向潮流导致网损增大以及分布式电源、负荷的波动导致节点电压波动等问题,文章基于固态变压器(Solid State Transformer,SST)两侧电力电子变换器的脉冲宽度调制技术,提出了一种控制潮流的方法。该方法首先建立了含SST的有源配电网动态无功优化模型;然后以多时刻的有功网损和电压波动为优化目标,采用改进多目标粒子群算法对SST的一、二次侧的电力电子变换器的调制角和调制系数等多个控制变量进行求解;最后建立仿真模型并与基于有载调压变压器的有源配电网动态无功优化方法进行比较。结果证明了所提方法在降低配电网网损和维持节点电压稳定方面的优越性。
文摘将模块化多电平变流器(modular multilevel converter,MMC)投入到固态变压器(solid state transformer,SST)系统中时通常采用比例积分微分(proportional integral derivative,PID)控制方法,但这种策略存在参数选取繁杂、动态性能较差的缺点。为了提高系统的动态性能并简化参数选取,提出了MMC-SST反馈线性化滑模控制策略。首先建立了MMC-SST整体仿真模型。然后建立了采用反馈线性化滑模控制的MMC-SST控制模型。最后利用MATLAB/Simulink平台将所提的控制方法与常规PID控制策略作了仿真比较,验证了所提反馈线性化滑模控制策略具备参数选择容易、动态性能优良的优势。
