Simulation of Solid Suspension in a Stirred Tank Using CFD-DEM Coupled Approach＊

Computational fluid dynamics-discrete element method(CFD-DEM) coupled approach was employed to simulate the solid suspension behavior in a Rushton stirred tank with consideration of transitional and rotational motions of millions of particles with complex interactions with liquid and the rotating impeller. The simulations were satisfactorily validated with experimental data in literature in terms of measured particle velocities in the tank.Influences of operating conditions and physical properties of particles(i.e., particle diameter and density) on the two-phase flow field in the stirred tank involving particle distribution, particle velocity and vortex were studied.The wide distribution of particle angular velocity ranging from 0 to 105r·min 1is revealed. The Magnus force is comparable to the drag force during the particle movement in the tank. The strong particle rotation will generate extra shear force on the particles so that the particle morphology may be affected, especially in the bio-/polymer-product related processes. It can be concluded that the CFD-DEM coupled approach provides a theoretical way to understand the physics of particle movement in micro- to macro-scales in the solid suspension of a stirred tank.

Modeling effective viscosity reduction behaviour of solid suspensions

Under a simple shearing flow, the effective viscosity of solid suspensions can be reduced by controlling the inclusion particle size or the number of inclusion particles in a unit volume. Based on the Stokes equation, the transformation field method is used to model the reduction behaviour of effective viscosity of solid suspensions theoretically by enlarging the particle size at a given high concentration of particles. With a lot of samples of random cubic particles in a unit cell, our statistical results show that at the same higher concentration, the effective viscosity of solid suspensions can be reduced by increasing the particle size or reducing the number of inclusion particles in a unit volume. This work discloses the viscosity reduction mechanism of increasing particle size, which is observed experimentally.

Gas dispersion and solid suspension in a three-phase stirred tank with triple impellers

The hydrodynamics is still not fully understood in the three-phase stirred tank equipped with multi-impeller due to the intensive interaction between phases.In this work,the solid critical suspension speed(NJSG),relative power demand(RPD)and overall gas holdup(ε_G)were measured in an air–water–glass beads stirred tank equipped with multi-impeller,which consists of a parabolic blade disk turbine below two down-pumping hydrofoils.Results show that either the NJSGor the specific power consumption increases when increasing the volumetric solid concentration or superficial gas velocity.RPD changes less than 10%when solid volumetric concentration ranges from 0 to 15%.ε_G decreases with the increase of solid concentration,and increases with the increase of both superficial gas velocity and the total specific power consumption.The quantitative correlations of NJSG,RPD andεGwere regressed as the function of superficial gas velocity,specific power consumption,Froude number and gas flow number,in order to provide the reference in the design of such three-phase stirred tank with similar multi-impellers.

Experimental and CFD studies of solid-liquid slurry tank stirred with an improved Intermig impeller

The improved Intermig impeller has been used in the seed precipitation tank in China, which could enhance the mixing and suspension of Al(OH)3 particles and the power consumption declined largely. The flow field, solids hold-up, cloud height, just off-bottom speed and power consumptions were investigated in solid-liquid mixing system with this new type of impeller by CFD and water experiment methods. Compared with the standard Intermig impeller, the improved one coupled with specially sloped baffles could promote the fluid circulation, create better solids suspension and consume less power. Besides lower impeller off-bottom clearance is good for solid suspension and distribution. The just-off-bottom speed was also determined by a power number criterion. Meanwhile, the predicted results were in good agreement with the experimental data.

Numerical Study of Solid-Liquid Two-Phase Flow in Stirred Tanks with Rushton Impeller (Ⅰ) Formulation and Simulation of Flow Field

The critical impeller speed, N_(JS), for complete suspension of solidparticles in the agitated solid-liquid two-phase system in baffled stirred tanks with a standardRushton impeller is predicted using the computational procedure proposed in Part Ⅰ. Three differentnumerical criteria are tested for determining the critical solid suspension. The predicted N_(JS)is compared with those obtained from several empirical correlations. It is suggested the mostreasonable criterion for determining the complete suspension of solid particles is the positive signof simulated axial velocity of solid phase at the location where the solid particles are mostdifficult to be suspended.

Design factors affecting the dynamic performance of soil suspension in an agitated, baffled tank

The effects of particle size, impeller clearance and impeller speed are assessed to show how condition variations influence power consumption in the water-solid slurry suspension in an agitated tank. The energy efficiency of slurry height variation, impeller type and diameter, and solid movement speed has been investigated with six soil series stirred in a soil-water slurry. Coarser sand particles are observed to significantly increase power consumption, while finer particles, for instance clay, decrease the stirring power requirement. The 3-blade HR100 SUPERMIX? impeller manufactured by SATAKE generally performs more efficiently than a conventional4-pitched blade turbine. The impeller's geometric design, including diameter and number of blades influences the impeller's energy efficiency, and HR100 impellers with greater diameters remarkably reduce power consumption. The tests demonstrated that the power required to provide off-bottom solid suspension and solid dispersion can be reduced dramatically by increasing the slurry height rather than by accelerating the impeller, if this option is possible.

Solid state synthesis of nano-mineral particles

Many researchers in academia and industries are interested in reducing particle sizes from few submicrometers to nano-meter levels.These nano-particles find application in several areas including ceramics,paints,cosmetics,microelectronics,sensors,textiles and biomedical,etc.This article reviews the present state of the art for solid state synthesis of mineral nano-particles by wet milling,including their operating variables such as ball size,solid mass fraction and suspension stability.This article concludes and recommends with a critical discussion of nano-particles synthesis and a few common strategies to overcome stability issues.