As one of the main structural units in a building,a solid wood floor has significant strategic research value for low-carbon energy saving.Taking the production line of a solid larch wood floor as a case study,we asse...As one of the main structural units in a building,a solid wood floor has significant strategic research value for low-carbon energy saving.Taking the production line of a solid larch wood floor as a case study,we assessed the environmental load during production based upon a life cycle assessment.Using GaBi 6.0 software,we analyzed the associated carbon sequestration during floor production,with the initial planting density serving as the disturbance factor in a modular analysis.The results indicated that the cutting and finishing steps have relatively intense,negative influences on the environment,whereas transportation,ripping,and trimming do not.Additionally,recycling biomass waste has the potential to reduce greenhouse gas emissions.When the initial planting density was 3.0×3.0 m,carbon sequestration was relatively high.Although the emissions of freshwater pollutants,volatile organic compounds,and fine particulate matter（matter with a 2.5-μm diameter） were comparatively high,the reduction of greenhouse gas emissions was still excellent at this planting density.展开更多
To improve and diversify the use of tropical plantation timbers in Southern China, with support from International Tropical Timber Organizations (ITTO), a research project was started in 2002 focusing on development o...To improve and diversify the use of tropical plantation timbers in Southern China, with support from International Tropical Timber Organizations (ITTO), a research project was started in 2002 focusing on development of processing and manufacturing technologies to promote production of value-added wood products from eucalypts plantations. This project will also facilitate the formulation of forest management strategy in China to supplement the diminishing supply of timber from the natural forests. The sp...展开更多
In order to develop municipal solid waste（MSW） pyrolysis/gasification and melting technology with low emission and high efficiency, it was planed that all the main components in MSW and some typical kinds of MSW wer...In order to develop municipal solid waste（MSW） pyrolysis/gasification and melting technology with low emission and high efficiency, it was planed that all the main components in MSW and some typical kinds of MSW were pyrolyzed/gasified to propose an expert system for raw MSW. In this paper, wood, which was a prevalent component in MSW, was pyrolyzed and gasified in fluidized-bed reactors at different apparent excess air ratios （EARs）, temperatures and fluidizing velocities. For pyrolysis, with tem- perature increasing from 400℃ to 700℃, the yield of pyrolysis char decreased while that of pyrolysis gas increased （in this paper respectively from 28% to 20% and from 10% to 35%）, and when temperature was 500℃, the yield of pyrolysis tar reached the highest, up to 38% in this paper. It was the optimum for gasification when temperature was 600℃ and apparent EAR was 0.4. Under the experimental conditions of this paper, gasification efficiency achieved 73%, lower heat value（LHV） reached 5800 kJ/（Nm^3） and yield of syngas was 2.01 Nm^3/kg. Lower fluidizing velocity was useful to upgrade gasification efficiency and LHV of syngas for wood gasification. Based on the results, the reactive courses and mechanism were analyzed respectively for wood pyrolysis and gasification.展开更多
基金supported by the Science and Technology Support Project for the Twelfth Five-year Grant in China(Grant No.2015BAD14B05)
文摘As one of the main structural units in a building,a solid wood floor has significant strategic research value for low-carbon energy saving.Taking the production line of a solid larch wood floor as a case study,we assessed the environmental load during production based upon a life cycle assessment.Using GaBi 6.0 software,we analyzed the associated carbon sequestration during floor production,with the initial planting density serving as the disturbance factor in a modular analysis.The results indicated that the cutting and finishing steps have relatively intense,negative influences on the environment,whereas transportation,ripping,and trimming do not.Additionally,recycling biomass waste has the potential to reduce greenhouse gas emissions.When the initial planting density was 3.0×3.0 m,carbon sequestration was relatively high.Although the emissions of freshwater pollutants,volatile organic compounds,and fine particulate matter（matter with a 2.5-μm diameter） were comparatively high,the reduction of greenhouse gas emissions was still excellent at this planting density.
文摘To improve and diversify the use of tropical plantation timbers in Southern China, with support from International Tropical Timber Organizations (ITTO), a research project was started in 2002 focusing on development of processing and manufacturing technologies to promote production of value-added wood products from eucalypts plantations. This project will also facilitate the formulation of forest management strategy in China to supplement the diminishing supply of timber from the natural forests. The sp...
文摘In order to develop municipal solid waste（MSW） pyrolysis/gasification and melting technology with low emission and high efficiency, it was planed that all the main components in MSW and some typical kinds of MSW were pyrolyzed/gasified to propose an expert system for raw MSW. In this paper, wood, which was a prevalent component in MSW, was pyrolyzed and gasified in fluidized-bed reactors at different apparent excess air ratios （EARs）, temperatures and fluidizing velocities. For pyrolysis, with tem- perature increasing from 400℃ to 700℃, the yield of pyrolysis char decreased while that of pyrolysis gas increased （in this paper respectively from 28% to 20% and from 10% to 35%）, and when temperature was 500℃, the yield of pyrolysis tar reached the highest, up to 38% in this paper. It was the optimum for gasification when temperature was 600℃ and apparent EAR was 0.4. Under the experimental conditions of this paper, gasification efficiency achieved 73%, lower heat value（LHV） reached 5800 kJ/（Nm^3） and yield of syngas was 2.01 Nm^3/kg. Lower fluidizing velocity was useful to upgrade gasification efficiency and LHV of syngas for wood gasification. Based on the results, the reactive courses and mechanism were analyzed respectively for wood pyrolysis and gasification.
