Persistence of fertilization effects on soil organic carbon in degraded alpine wetlands in the Yellow River source region

In the restoration of degraded wetlands,fertilization can improve the vegetation-soil-microorganisms complex,thereby affecting the organic carbon content.However,it is currently unclear whether these effects are sustainable.This study employed Biolog-Eco surveys to investigate the changes in vegetation characteristics,soil physicochemical properties,and soil microbial functional diversity in degraded alpine wetlands of the source region of the Yellow River at 3 and 15 months after the application of nitrogen,phosphorus,and organic mixed fertilizer.The following results were obtained:The addition of nitrogen fertilizer and organic compost significantly affects the soil organic carbon content in degraded wetlands.Three months after fertilization,nitrogen addition increases soil organic carbon in both lightly and severely degraded wetlands,whereas after 15 months,organic compost enhanced the soil organic carbon level in severely degraded wetlands.Structural equation modeling indicates that fertilization decreases the soil pH and directly or indirectly influences the soil organic carbon levels through variations in the soil water content and the aboveground biomass of vegetation.Three months after fertilization,nitrogen fertilizer showed a direct positive effect on soil organic carbon.However,organic mixed fertilizer indirectly reduced soil organic carbon by increasing biomass and decreasing soil moisture.After 15 months,none of the fertilizers significantly affected the soil organic carbon level.In summary,it can be inferred that the addition of nitrogen fertilizer lacks sustainability in positively influencing the organic carbon content.

Influence of carbon sources on the performance of carbon-coated nano-silicon

Silicon-based material is an important anode material for next-generation lithium-ion batteries.In order to overcome its shortcomings,carbon coating is often employed to improve the electrochemical performance.However,the carbon source,carbon content,and different contact and mixing schemes between carbon sources and silicon are all complex factors and need to be clarified.In this study,nano-silicon is coated by the chemical vapor deposition method using different carbon sources,such as acetylene,methane,propane,and propylene.Carbon content after coating is designed to stay at the same level to reduce the experimental error.Results show the sample with higher conductivity provides higher cycle performance.Propylene is the best choice of the four carbon sources studied in this work.These results indicate that the selection of the carbon source is an important factor that plays a significant role in electrochemical performance.

Organic Carbon in the Surface Sediments from the Intensive Mariculture Zone of Sanggou Bay: Distribution, Seasonal Variations and Sources

Mariculture has rapidly grown worldwide, which might greatly influence the biogeochemical cycle of organic carbon in coastal seas. In this study, several geochemical parameters, including grain size composition, sedimentary total organic carbon (TOC), total nitrogen (TN), stable carbon (δ13C) and nitrogen (δ15N) isotopic compositions, were analyzed for surface sediments collected from different mariculture zones of Sanggou Bay and in different seasons. We investigated the composition and distribution of or- ganic matter in surface sediments and further evaluated the contribution of mariculture activities to TOC sources. The TOC and TN contents (mass percentage) in the bay were in the range of 0.14% to 1.45% and 0.03% to 0.20%, respectively. The spatial distribution indicated that sedimentary TOC and TN contents in shellfish monoculture and shellfish-kelp polyculture zones were higher than in other mariculture zones, which might be related to grain size composition and mariculture organisms. Seasonal variations of TOC contents were observed in different mariculture zones. The TOC/TN atomic ratio (C/N),δ13C and δ15N were in the ranges of 5.97 to 10.97, 21.76‰ to 13.14‰ and 2.13‰ to 8.08‰, respectively, implying that sedimentary organic matter in Sanggou Bay was the mixture of marine phytoplankton, terrestrial and maricultural sources. A simple mixing model based on δ13C was applied and the results indicated that the relative contributions of organic carbon sources in Sanggou Bay followed the order kelp (36.6%) marine phytoplankton (28.7%) shellfish bio-deposition (23.8%) terrestrial input (10.9%). Surface sediments in Sanggou Bay were domi- nated by mariculture-derived organic carbon, which on average accounted for 60.4% of TOC.

Carbon and nitrogen isotopes analysis and sources of organic matter in surface sediments from the Sanggou Bay and its adjacent areas, China

Naturally existing stable carbon and nitrogen isotopes are important in the study of sedimentary organic matter sources. To identify the sources of sedimentary organic matter in Sanggou Bay and its adjacent areas, which is characterized by high-density shellfish and seaweed aquaculture, the grain size, organic carbon （OC）, total nitrogen （TN）, carbon and nitrogen isotopic composition （δ13C andδ15N） of organic matter in the surface sediment were determined. The results showed that, in August, sedimentary OC and TN ranged from 0.17% to 0.76% and 0.04% to 0.14%, respectively. In November, OC and TN ranged from 0.23% to 0.87% and 0.05% to 0.14%, respectively. There was a significant positive correlation between OC and TN （R=0.98, P＆lt;0.0001）, indicating that OC and TN were homologous. In August, theδ13C andδ15N of organic matter varied from -23.06‰ to -21.59‰ and 5.10‰ to 6.31‰, respectively. In November,δ13C andδ15N ranged from -22.87‰ to -21.34‰ and 5.13‰ to 7.31‰, respectively. This study found that the major sources of sedimentary organic matter were marine shellfish biodeposition, seaweed farming, and soil organic matter. Using a three-end-member mixed model, we estimated that the dominant source of sedimentary organic matter was shellfish biodeposition, with an average contribution rate of 65.53% in August and 43.00% in November. Thus, shellfish farming had a significant influence on the coastal carbon cycle.

The Effects of Three Mineral Nitrogen Sources and Zinc on Maize and Wheat Straw Decomposition and Soil Organic Carbon

The incorporation of straw in cultivated ifelds can potentially improve soil quality and crop yield. However, the presence of recalcitrant carbon compounds in straw slow its decomposition rate. The objective of this study was to determine the effects of different nitrogen sources, with and without the application of zinc, on straw decomposition and soil quality. Soils were treated with three different nitrogen sources, with and without zinc： urea （CO（NH2）2）, ammonium sulfate （（NH4）2SO4）, and ammonium chloride （NH4Cl）. The combined treatments were as follows：maize （M） and wheat （W） straw incorporated into urea-, ammonium sulfate-, or ammonium chloride-treated soil （U, S, and C, respectively） with and without zinc （Z） （MU, MUZ, WU, WUZ;MS, MSZ, WS, WSZ;MC, MCZ, WC, WCZ, respectively）;straw with zinc only （MZ, WZ）;straw with untreated soil （MS, WS）;and soil-only or control conditions （NT）. The experiment consisted of 17 treatments with four replications. Each pot contained 150 g soil and 1.125 g straw, had a moisture content of 80%of the ifeld capacity, and was incubated for 53 days at 25°C. The rates of CO2-C emission, cumulative CO2-C evolution, total CO2 production in the soils of different treatments were measured to infer decomposition rates. The total organic carbon （TOC）, labile organic carbon （LOC）, and soil microbial biomass in the soils of different treatments were measured to infer soil quality. All results were signiifcantly different （P〈0.05） with the exception of the labile organic carbon （LOC）. The maize and wheat straw showed different patterns in CO2 evolution rates. For both straw types, Zn had a synergic effect with U, but an antagonistic effect with the other N sources as determined by the total CO2 produced. The MUZ treatment showed the highest decomposition rate and cumulative CO2 concentration （1 120.29 mg/pot）, whereas the WACZ treatment had the lowest cumulative CO2 concentration （1 040.57 mg/pot）. The addition of NH4Cl resulted in the highest total organic carbon （TOC） concentration （11.59 mg kg-1）. The incorporation of wheat straw resulted in higher microbial biomass accumulation in soils relative to that of the maize straw application. The results demonstrate that mineral N sources can affect the ability of microorganisms to decompose straw, as well as the soil carbon concentrations.

Analysis of phosphate-accumulating organisms cultivated under different carbon sources with polymerase chain reaction-denaturing gradient gel electrophoresis assay

To investigate the microbial communities of microorganisms cultivated under different carbon sources, three sequencing batch reactors were operated. They were supplied with sewage, glucose and sodium acetate as carbon sources respectively and showed high phosphorus removal performance. The results of denaturing gradient gel electrophoresis(DGGE) of polymerase chain reaction-amplified(PCR) 16S rDNA fragments demonstrated that β-protebacteria, Actinomyces sp. and γ-protebacteria only exited in 1# reactor. The microbiological diversity of 1# reactor exceeded the other two reactors. Flavobacterium, Bacillales, Actinomyces, Actinobacteridae and uncultured bacteria(AF527584, AF502204, AY592749, AB076862, AJ619051, AF495454 and AY133070) could be detected in the biological phosphorus removal reactors.

Burial fluxes and sources of organic carbon in sediments of the central Yellow Sea mud area over the past 200 years

Long-term changes of composition, sources and burial fluxes of TOC （total organic carbon） in sediments of the central Yellow Sea mud area and their possible affecting factors are discussed in this paper. Firstly, similarity analysis is employed to confirm that the carbon burial features resulted from two collected cores are typical in the central Yellow Sea mud area where YSWC （Yellow Sea Warm Current） is prevalent. On this basis, the burial flux of TOC here was considered to be 235.5-488.4 pmol/（cm^2.a） since the first industrial revolution, accounting for about 70%-90% among burial fluxes of TC （total carbon） in the sediments. Compared TOC/TC ratio in the two cores with that in other marine sediments worldwide, we suggest that the growth of calcareous/non-calcareous organisms and dissolution of IC （inorganic carbon） are important factors controlling the TOC/TC ratio in sediment. Results of two-end mixed model based on fi13C data indicate that marine-derived organic carbon （OCa） is the main part among total burial organic carbon which accounts for a ratio over 85%. Due to the high TOC/TC ratio in the two cores, TC in the sediments also mainly exists as OCa, and the proportion of OCa is about 60%-80%. Away from the shore and relatively high primary production in upper waters are the main reasons that OCa is predominant among all burial OC in sediments of the central Yellow Sea mud area. Burial of OC in this mud area is probably mainly influenced by the human activities. Although the economic development during the late 19th century caused by the first industrial revolution in China did not obviously increase the TOC burial fluxes in the sediments, the rise of industry and agriculture after the founding of new China has clearly increased the TOC burial flux since 1950s. Otherwise, we also realize that among TC burial fluxes, TIC account for about 10%-30% in sediments of the central Yellow Sea mud area, so its burial could not be simply ignored here. Distinct from TOC burial, long-term TIC burial fluxes variations relate with climate changes more closely： the East Asian summer monsoon may influence the strength of the Huanghe River （Yellow River） flood, which could further affect the transport of terrestrial IC from land to the central Yellow Sea as well as the burial of these IC in the sediments.

Effects of carbon sources and temperature on the formation and structural characteristics of food-related Staphylococcus epidermidis biofilms

Biofilms are a constant concern in the food industry;understanding the effect of environmental conditions on biofilm formation is essential to develop effective control strategies.Therefore,this study was conducted to investigate biofilms formation by Staphylococcus epidermidis under various conditions.Biofilms were cultured in nutrient broth containing different carbon source concentrations(0–10 mg/mL)on polystyrene surfaces for 32 h of incubation at 37℃or 55℃,with quantification and enumeration at 8,16,24 and 32 h.S.epidermidis developed biofilms under all tested conditions;achieved the highest yield of biofilm biomass at 2.5 mg/mL for all carbon sources at 37℃.The highest efficiency of extracellular polymeric substance(EPS)molecule production occurred under glucose availability in the growth environment,with a higher yield of biomass and a significantly smaller number of metabolically active cells than under other tested conditions.A condensed ball-shaped structure was observed under the lactose condition.Meanwhile,biofilms in the presence of maltose showed mainly opaque thick rich colonies,while a compact multilayered-shaped structure was exhibited under both glucose and sucrose conditions.These results contribute to a better understanding of the biofilm formation by S.epidermidis in order to reduce contamination and recontamination in the food industry.

G protein and MAPK signaling pathways control the ability of <i>Cochliobolus heterostrophus</i>to exploit different carbon sources

Phytopathogenic fungi are heterotrophic organisms that excrete a complex array of enzymes for digestion of plant host tissues. Regulation and coordination of extracellular enzyme production, according to growth conditions and fungus nutritional needs, may be controlled by conserved eukaryotic signaling elements such as G-protein subunits and mitogen-activated protein kinase (MAPK). These pathways are known to mediate a complex set of responses in fungi involved in development, reproduction and pathogenicity. Here, we used a series of mutants, deficient in G-protein α (cga1) or/and β subunits or in MAPK, to test their contribution to the ability of Cochliobolus heterostrophus to utilize different carbon sources. In saprophytic culture, the G-protein α subunit mutant strains had WT levels of cellulase, pectinase and protease degradation activities, but it grew significantly slower on minimal medium containing maltose. This weakened ability implies an essential role of the CGA1 signaling in some poor nutritional environments. Remarkably, the MAPK null mutant failed to achieve the WT (and cga1) growth rate on cellulose as a sole carbon and did not grow at all for the first seven days of culture. An enzymatic activity test revealed that this strain significantly reduced cellulose extracellular degradation activity when grew on this medium. Deficiency in the MAPK encoding gene also led to reduced ability to grow on pectin, protein sources and maltose as a sole carbon. The evidence presented indicates a significant and nutrient-specific role of the G-protein and MAPK pathways in mediating growth of this fungus in different environments.

Direct Synthesis of Co-doped Graphene on Dielectric Substrates Using Solid Carbon Sources

Direct synthesis of high-quality doped graphene on dielectric substrates without transfer is highly desired for simplified device processing in electronic applications.However,graphene synthesis directly on substrates suitable for device applications,though highly demanded,remains unattainable and challenging.Here,a simple and transfer-free synthesis of high-quality doped graphene on the dielectric substrate has been developed using a thin Cu layer as the top catalyst and polycyclic aromatic hydrocarbons as both carbon precursors and doping sources.N-doped and N,F-co-doped graphene have been achieved using TPB and F16Cu Pc as solid carbon sources,respectively.The growth conditions were systematically optimized and the as-grown doped graphene were well characterized.The growth strategy provides a controllable transfer-free route for high-quality doped graphene synthesis,which will facilitate the practical applications of graphene.

The Effects of Different Carbon Sources on the Growth of <i>Rhodobacter sphaeroides</i>

Rhodobacter sphaeroides is a purple non-sulfur bacterium that belongs to the α-3 subdivision of Proteobacteria. R. sphaeroides is a model bacterial species because of its complex genome structure and expanded metabolic capabilities. The genome of R. sphaeroides consists of two circular chromosomes and five endogenous plasmids. It has the ability to grow under a wide variety of environmental conditions. It grows aerobically (~20% O2), semi-aerobically (~2% O2), and photosynthetically (under anaerobic condition plus light). It has been previously shown that many bacterial species utilize a number of alternate carbon sources for their optimal growth under a variety of growth conditions. We hypothesize that different or an additional carbon source in the minimal medium differentially affects the bacterial growth under dark-aerobic conditions. The bacterial growth kinetics and the number of cells in the bacterial culture were analyzed by measuring the optical density (OD at 600 nm) and the colony forming units (CFUs) at regular intervals of bacterial cultures. Results reveal that sodium succinate is the preferred sole carbon source for the optimal growth of R. sphaeroides. The results of growth kinetics and CFUs together concluded that from the tested carbon sources, sodium succinate is the best single carbon source in the minimal media for the optimal growth of R. sphaeroides. Interestingly, cell culture grown in SIS supplemented with sodium acetate exhibits a prolonged lag phase with the lowest ODs and CFUs that later switches to the growth-burst phase support previously discovered similar phenomenon of the growth-rate switch in the presence of acetate metabolism. Future work will utilize the aerobically grown R. sphaeroides’ cells as a biocatalyst to deplete the oxygen levels from natural gas streams and industrial gas pipelines.

Sources and transport of particulate organic carbon in the Amazon River and its estuary

Stable carbon isotope ratios have been used to study the sources of particulate organic carbon(POC) in the Amazon River and its tributaries, and to examine the transport of the riverine POC intothe oceanic environment. POC in the upper reaches of the Amazon River has more positive δC values(--24.5‰ to -- 28.0‰) than that in the middle and lower reaches (--27.9‰ to -- 30.1‰). TheδC of POC from the tributaries is generally more negative than that observed in the Amazon mainchannel. This δC datum shows that the POC in the Amazon main channel is predominantly of terres-trial origin rather than a result of in situ production. A large range of δC values (--17.5‰ to -28.4‰) is observed in the Amazon Estuary and plume. and is considered as the result of the mixing

Production and characterization of exopolysaccharides in mycelial culture of Cordyceps sinensis fungus Cs-HK1 with different carbon sources

The effects of different carbon sources(sugars) on the production and molecular properties of exopolysaccharides(EPS) were evaluated in the mycelial liquid culture of a medicinal fungus Cordyceps sinensis Cs-HK1. Galactose or mannose was used(at 5 g·L^(-1)) as a secondary carbon source with glucose(35 g·L^(-1)) at the mass ratio of 1:7. Mannose was consumed notably since the first day of culture, but galactose was not even after glucose was exhausted.The volumetric yield of EPS in culture was increased slightly with the addition of galactose and decreased with mannose. The monosaccharide composition of EPS was also different, e.g., on day 8, the glucose contents of EPS were 76%with the addition of mannose, 59% with galactose, compared with 62% with glucose only. The molecular weight distribution of EPS was also affected by the secondary carbon source, being generally lower compared with that with glucose only. The results suggested that the addition of galactose improved the total yield of EPS in culture while mannose can improve the yield of glucan constituent of EPS.

Production of Poly（3-hydroxybutyrate-co-3-hydroxyhexanoate） by Recombinant Pseudomonas stutzeri 1317 from Unrelated Carbon Sources

合成生物学诺言将由装配整个小径的分开的模块简化新陈代谢的小径的构造。这为象 polyhydroxyalkanoates (公众房产管理局) 那样的工业产品的微生物引起的生产给新途径。在这研究，(3-hydroxybutyrate-co-3-hydroxyhexanoate )(PHBHHx ) 由 Pseudomonas stutzeri， 1317 从无关的碳采购原料 poly 生产例如葡萄糖， P 的 phaC1-phaZ-phaC2 操纵子。stutzeri 1317 被击倒产生 PHA 缺乏的变异的 P。stutzeri 1317LF。然后，包含 phaCAhAReBRe， phaCAhBReGPp 和 phaCAhPAh 的三个模块被介绍进 P。stutzeri 1317LF 独立。饮料烧瓶结果显示先锋供应和公众房产管理局 synthase 活动是为 P 的 PHBHHx 累积的重要因素。stutzeri 1317LF。而且，从不同的碳资源的 recombinants 的 PHBHHx 累积被执行。最高的 PHBHHx 内容是 23.7%( 由质量) 与 58.6%( 由鼹鼠) 3HB 部分。这些结果为进一步改进 P 的 PHBHHx 累积提供基础。从无关的碳来源的 stutzeri。

Urban Landscaping Design and Carbon Reduction Planning Countermeasures

As the most significant green ecological resource in densely populated and economically developed areas,urban landscaping plays a pivotal role in carbon sink value and multiple ecosystem service functions.It is a crucial element in the advancement of green and low-carbon initiatives in China’s major cities and the realization of a carbon-neutral vision.By analyzing the relationship between carbon emission reduction and urban landscaping,the paper sorts out and summarizes the basic principles of urban landscaping design,proposes the role of landscape design in urban landscaping,and plans countermeasures for carbon reduction in urban landscaping,with a view to optimizing the construction and management of urban landscaping.

Carbon Nitride Nanowire Bundle and Tubes:Solid-state Synthesis,Characterization and Photoluminescent Properties

Graphite-like carbon nitride nanowire bundles were synthesized from melamine via the solid state thermolysis at relatively low temperature（400℃）.Hexagonal carbon nitride tubes were prepared for the first time by heating the nanowire bundles at 550 ℃ in argon atmosphere.The forming process of tubes and transformation of the molecular structures from s-triazine rings to tri-s-triazine units were analyzed.The blue and yellow-green emission photoluminescent（PL） properties of the products were investigated in detail,and the reasons for the differences of PL properties between the bundles and tubes were discussed.

Characteristic and sources of carbon fractions in FM2.5 in Tianjin urban area

Organic carbon （OC）,element carbon （EC） and 8 car- bon fractions （OC1,OC2,OC3,OC4,EC1,EC2,EC3 and py rolytic carbon（OP）） in PM2.s samples collected in Tianjin ur- ban area during January to April, 2014 were analyzed with thermal light reflection method. The result showed that the concentrations of OC and EC in PM2.s were （18.7 ± 9.9）, （3.9 ± 2.6 ） μg/m3 , respectively, which accounting for 18.0 of PM2.s mass concentrations. Temporal variability of OC and EC was consistent, they were higher in the spring festival and heating season,and lower in the non heating season. The cor relation of carbon fractions were analyzed by SPSS 20.0, which illustrating the tight relationship between OC1-OC4 and ECI EC3, and suggesting that these constituents were derived from the same primary emission source or they were influenced by similar secondary processes in the atmosphere. The principal component analysis （PCA） showed that coal combus- tion,biomass burning and motor vehicle exhaust were three main sources of OC and EC in PM2.5 in Tianjin urban area.

Unveiling chain–chain interactions in CO2-based crystalline stereocomplexed polycarbonates by solid-state NMR spectroscopy and DFT calculations

CO2-based stereocomplexed polycarbonates derived from the intermolecularly interlocked interaction between the enantiopure polymers with the opposite configuration exhibit high crystallinity, excellent thermal and mechanical stabilities. Deep insights into the mechanism of stereocomplexation are of particular importance to the design and manufacture of new promising and sustainable polycarbonates with enhanced physicochemical properties. Our solid-state NMR experiments linking with DFT computations clearly reveal the specific chain-chain interactions in a typical stereocomplexed poly（4,4-dimethyl-3,5,8-trioxabicyclo[5.1.0] octane carbonate）（PCXC）.13C CP/MAS NMR,1H DUMBO MAS NMR and 13C/1H relaxation-time measurements indicate that the formation of stereocomplex reduces the local mobilities of carbonyl, methine and methylene groups in each chain of PCXC significantly. Through a combination of two-dimensional 1H-13C HETCOR NMR and DFT calculation analysis, the cis-/trans-conformations and packing models of PCXC chains in the amorphous, enantionpure isotactic and stereocomplexed polycarbonates are identified. The splitting of 13C and 1H NMR chemical shifts of methine groups in the backbone carbon region demonstrates the ordered interlock interactions between the R-and S-chain in the stereocomplexed PCXC.

System design and measurements of flux concentrator and its solid-state modulator for CEPC positron source

Positron sources are one of the most important components of the injector of a circular electron positron collector(CEPC).The CEPC is designed as an e^(+)e^(−)collider for a Higgs factory.Its accelerator system is composed of 100-km-long storage rings and an injector.The design goal of the positron source is to obtain positron beams with a bunch charge of 3 nC.The flux concentrator(FC)is one of the cores of the positron source.This paper reports the design,development,and measurements of an FC prototype system.The prototype includes an FC and an all-solid-state high-current pulse modulator.Preliminary tests show that the peak current on the FC can reach 15.5 kA,and the peak magnetic field can reach 6.2 T.The test results are consistent with the theoretical simulation.The FC system fulfills the requirements of the CEPC positron source as well as provides a reference for the development of similar devices both domestically and abroad.

Effects of Different Carbon Sources and NaBr-KCl on Synthesis of Ti(C,N)

Ti（ C, N） was synthesized with the starting materials of 76. 9% titania white and 23. 1% carbon black （graphite or activated carbon ）, or 40% titania white and 60% amylum, with or without 10% NaBr - KCl, dry moulding and carbon embedded firing at i 300 ℃ and 1 400 ℃ for 3 h, respectively. Phase composition and microstructure of the synthesized Ti （C, N） were analyzed by XRD, SEM and EPMA. Effects of different carbon sources and NaBr-KCl on the synthesis of Ti（ C, N） were investigated. The results show that： （1） Ti （C, N） can be synthesized by using carbon black, graphite, activated carbon or amylum as carbon source separately; （2） Additive NaBr - KCl is more favorable for accelerating the carbothermal reduction reaction using carbon black or amylum as carbon source; （3） In the presence of NaBr - KCl, particle size of the synthesized Ti（ C, N） is 5 -8μm using carbon black as carbon source fired at 1 300 ℃ for 3 h, while that is only 1 - 3 μm using graphite, activated carbon or amylum fired at 1 400 ℃ for 3 h.