Li transient concentration distribution in spherical active material particles can affect the maximum power density and the safe operating regime of the electric vehicles(EVs). On one hand, the quasiexact/exact soluti...Li transient concentration distribution in spherical active material particles can affect the maximum power density and the safe operating regime of the electric vehicles(EVs). On one hand, the quasiexact/exact solution obtained in the time/frequency domain is time-consuming and just as a reference value for approximate solutions;on the other hand, calculation errors and application range of approximate solutions not only rely on approximate algorithms but also on discharge modes. For the purpose to track the transient dynamics for Li solid-phase diffusion in spherical active particles with a tolerable error range and for a wide applicable range, it is necessary to choose optimal approximate algorithms in terms of discharge modes and the nature of active material particles. In this study, approximation methods,such as diffusion length method, polynomial profile approximation method, Padé approximation method,pseudo steady state method, eigenfunction-based Galerkin collocation method, and separation of variables method for solving Li solid-phase diffusion in spherical active particles are compared from calculation fundamentals to algorithm implementation. Furthermore, these approximate solutions are quantitatively compared to the quasi-exact/exact solution in the time/frequency domain under typical discharge modes, i.e., start-up, slow-down, and speed-up. The results obtained from the viewpoint of time-frequency analysis offer a theoretical foundation on how to track Li transient concentration profile in spherical active particles with a high precision and for a wide application range. In turn, optimal solutions of Li solid diffusion equations for spherical active particles can improve the reliability in predicting safe operating regime and estimating maximum power for automotive batteries.展开更多
A novel poly(ether imide)s containing phthalazinone and isopropyl moieties derived from 2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl]-phthalazin-1-one and bisphenol-A diphthalic anhydride was synthesized by one-step ...A novel poly(ether imide)s containing phthalazinone and isopropyl moieties derived from 2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl]-phthalazin-1-one and bisphenol-A diphthalic anhydride was synthesized by one-step solution condensation polymerization in nr-cresol. The polymer was characterized by FTIR, NMR, molecular weights, glass transition temperature, thermal degradation temperature and WAXD.展开更多
The solid-phase extraction(SPE) technique applied to the extraction of organic compound was creatively used as the extraction of inorganic gold in the paper.Two types of techniques were proposed and explored,namely ...The solid-phase extraction(SPE) technique applied to the extraction of organic compound was creatively used as the extraction of inorganic gold in the paper.Two types of techniques were proposed and explored,namely the SPE and the liquid–liquid extraction(LLE) of the quaternary ammonium surfactant [cetytrimethyl ammonium bromide(CTMAB),cetyl pyridine bromide(CPB),benzyl dimethyl dodecyl ammonium chloride(BDMDAC),and dodecyl trimethyl ammonium chloride(DTMAC)].The surfactant could react with Au(CN)2^- to form the ionic complex,and the compound could be extracted by SPE column of reversed-phase bonded silica gel.Hence,a new method of SPE was proposed to extract gold with these features of the high selectivity,the reliability,and the simplicity.The experimental result shows that the recovery rate of gold is more than 98 %,and the solid-phase extraction column is not easily damaged and it can be repeatedly used.The new method can be used as the extraction process of gold from alkaline cyanide solution as well.Besides,the paper also puts forward a new process of gold extraction.展开更多
Polyimides are well-known for their high chemical inertness and thermal stability. However, it is usually challenging to synthesize UV-curable polyimides since the imidization reaction requires such harsh conditions t...Polyimides are well-known for their high chemical inertness and thermal stability. However, it is usually challenging to synthesize UV-curable polyimides since the imidization reaction requires such harsh conditions that acrylate type double bonds cannot withstand. In this work, synthetic methods are developed to obtain polyester-imide type binder polymers with high thermal stability, high compatibility with the other components of the black photoresist, and fine photolithographic patterning property for the negative-tone black photoresist. The syntheses of diimide-diacid or diimide-diol intermediates for the polyesterification with dianhydride gave polyester imides which meets this requirement. The photolithographic tests have shown that the patterning of the micron-sized PDL of the organic light emitting diode (OLED) panel could be obtained. This work will interest the researchers working on the design and optimization of thermally stable binder polymers.展开更多
Polyurethane-imide elastomers (PUIEs) are formed from isocyanate, polyol, acid anhydride, and diamine by liquid polymerization. Unfortunately, many of the diamines have rarely been applied to the formation of PUIEs. H...Polyurethane-imide elastomers (PUIEs) are formed from isocyanate, polyol, acid anhydride, and diamine by liquid polymerization. Unfortunately, many of the diamines have rarely been applied to the formation of PUIEs. Hence, investigating the effect of diamines on PUIEs remains a challenge in polymer chemistry. Herein, PUIEs prepared from 4,4'-diphenylmethane diisocyanate (MDI), polytetramethylene glycol (Mw: 1000), pyromellitic dianhydride, and aromatic diamines (such as p-phenylene diamine, 4,4'-oxydianiline, and 1,3-bis(4-aminophenoxy)benzene), and aliphatic diamines (such as 1,2-ethylene diamine, 1,6-hexamethylene diamine, and 1,12-dodecamethylene diamine) were synthesized by liquid polymerization. The morphologies and the chemical, thermal, and mechanical properties of the various PUIEs were investigated. The obtained elastomeric sheets were characterized in terms of the following tests and methods: solubility and swelling tests, X-ray diffraction and differential scanning calorimetry, dynamic mechanical analysis and thermogravimetric analysis, tensile tests, nuclear magnetic resonance spectroscopy, infrared spectroscopy, atomic force microscopy, contact angle microscopy, and scanning electron展开更多
Six hybridoma cell lines that can continuously secrete monoclonal antibodies against adenylate kinase (AK) have been produced. The characteristics including the subclass and molecular weight of monoclonal antibodies m...Six hybridoma cell lines that can continuously secrete monoclonal antibodies against adenylate kinase (AK) have been produced. The characteristics including the subclass and molecular weight of monoclonal antibodies manufactured by these strains are also determined. Further studies show that the two monoclonal antibodies McAb3D3 and McAMD8 bind easily with AK absorbed on microtitration plates, with affinity constants of 8.4 × 108 M-1 and 9.6 × 108 M-1, while their interactions to AK in solution are much weaker, with affinity constants of 7.0 × 104 M-1 and 3.9×106M-1, respectively. Thus, McAb3D3 and McAMD8 react preferentially to the immobilized AKs. Since pro-teins are often partially denatured when absorbed on microtitration plates, it is suggested that both McAb3D3 and McAMD8 are directed against non-native AK.展开更多
基金the financial support from the National Science Foundation of China(22078190 and 12002196)the National Key Research and Development Program of China(2020YFB1505802)。
文摘Li transient concentration distribution in spherical active material particles can affect the maximum power density and the safe operating regime of the electric vehicles(EVs). On one hand, the quasiexact/exact solution obtained in the time/frequency domain is time-consuming and just as a reference value for approximate solutions;on the other hand, calculation errors and application range of approximate solutions not only rely on approximate algorithms but also on discharge modes. For the purpose to track the transient dynamics for Li solid-phase diffusion in spherical active particles with a tolerable error range and for a wide applicable range, it is necessary to choose optimal approximate algorithms in terms of discharge modes and the nature of active material particles. In this study, approximation methods,such as diffusion length method, polynomial profile approximation method, Padé approximation method,pseudo steady state method, eigenfunction-based Galerkin collocation method, and separation of variables method for solving Li solid-phase diffusion in spherical active particles are compared from calculation fundamentals to algorithm implementation. Furthermore, these approximate solutions are quantitatively compared to the quasi-exact/exact solution in the time/frequency domain under typical discharge modes, i.e., start-up, slow-down, and speed-up. The results obtained from the viewpoint of time-frequency analysis offer a theoretical foundation on how to track Li transient concentration profile in spherical active particles with a high precision and for a wide application range. In turn, optimal solutions of Li solid diffusion equations for spherical active particles can improve the reliability in predicting safe operating regime and estimating maximum power for automotive batteries.
文摘A novel poly(ether imide)s containing phthalazinone and isopropyl moieties derived from 2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl]-phthalazin-1-one and bisphenol-A diphthalic anhydride was synthesized by one-step solution condensation polymerization in nr-cresol. The polymer was characterized by FTIR, NMR, molecular weights, glass transition temperature, thermal degradation temperature and WAXD.
基金financially supported by the National Natural Science Foundation of China (No.20471051.)
文摘The solid-phase extraction(SPE) technique applied to the extraction of organic compound was creatively used as the extraction of inorganic gold in the paper.Two types of techniques were proposed and explored,namely the SPE and the liquid–liquid extraction(LLE) of the quaternary ammonium surfactant [cetytrimethyl ammonium bromide(CTMAB),cetyl pyridine bromide(CPB),benzyl dimethyl dodecyl ammonium chloride(BDMDAC),and dodecyl trimethyl ammonium chloride(DTMAC)].The surfactant could react with Au(CN)2^- to form the ionic complex,and the compound could be extracted by SPE column of reversed-phase bonded silica gel.Hence,a new method of SPE was proposed to extract gold with these features of the high selectivity,the reliability,and the simplicity.The experimental result shows that the recovery rate of gold is more than 98 %,and the solid-phase extraction column is not easily damaged and it can be repeatedly used.The new method can be used as the extraction process of gold from alkaline cyanide solution as well.Besides,the paper also puts forward a new process of gold extraction.
文摘Polyimides are well-known for their high chemical inertness and thermal stability. However, it is usually challenging to synthesize UV-curable polyimides since the imidization reaction requires such harsh conditions that acrylate type double bonds cannot withstand. In this work, synthetic methods are developed to obtain polyester-imide type binder polymers with high thermal stability, high compatibility with the other components of the black photoresist, and fine photolithographic patterning property for the negative-tone black photoresist. The syntheses of diimide-diacid or diimide-diol intermediates for the polyesterification with dianhydride gave polyester imides which meets this requirement. The photolithographic tests have shown that the patterning of the micron-sized PDL of the organic light emitting diode (OLED) panel could be obtained. This work will interest the researchers working on the design and optimization of thermally stable binder polymers.
文摘Polyurethane-imide elastomers (PUIEs) are formed from isocyanate, polyol, acid anhydride, and diamine by liquid polymerization. Unfortunately, many of the diamines have rarely been applied to the formation of PUIEs. Hence, investigating the effect of diamines on PUIEs remains a challenge in polymer chemistry. Herein, PUIEs prepared from 4,4'-diphenylmethane diisocyanate (MDI), polytetramethylene glycol (Mw: 1000), pyromellitic dianhydride, and aromatic diamines (such as p-phenylene diamine, 4,4'-oxydianiline, and 1,3-bis(4-aminophenoxy)benzene), and aliphatic diamines (such as 1,2-ethylene diamine, 1,6-hexamethylene diamine, and 1,12-dodecamethylene diamine) were synthesized by liquid polymerization. The morphologies and the chemical, thermal, and mechanical properties of the various PUIEs were investigated. The obtained elastomeric sheets were characterized in terms of the following tests and methods: solubility and swelling tests, X-ray diffraction and differential scanning calorimetry, dynamic mechanical analysis and thermogravimetric analysis, tensile tests, nuclear magnetic resonance spectroscopy, infrared spectroscopy, atomic force microscopy, contact angle microscopy, and scanning electron
基金Project supported by the Climbing Project of the State Commission of Science and Technology of China.
文摘Six hybridoma cell lines that can continuously secrete monoclonal antibodies against adenylate kinase (AK) have been produced. The characteristics including the subclass and molecular weight of monoclonal antibodies manufactured by these strains are also determined. Further studies show that the two monoclonal antibodies McAb3D3 and McAMD8 bind easily with AK absorbed on microtitration plates, with affinity constants of 8.4 × 108 M-1 and 9.6 × 108 M-1, while their interactions to AK in solution are much weaker, with affinity constants of 7.0 × 104 M-1 and 3.9×106M-1, respectively. Thus, McAb3D3 and McAMD8 react preferentially to the immobilized AKs. Since pro-teins are often partially denatured when absorbed on microtitration plates, it is suggested that both McAb3D3 and McAMD8 are directed against non-native AK.