An O / W emulsion non-solvent addition method was used to prepare ethyleellulose (EC) microcapsules of water soluble pharmaceutical (theophylline). The solvent and non-solvent reagents used in this work were toluene a...An O / W emulsion non-solvent addition method was used to prepare ethyleellulose (EC) microcapsules of water soluble pharmaceutical (theophylline). The solvent and non-solvent reagents used in this work were toluene and cyclohexane. The effects of polymer concentration, core wall ratio and particle size on the kinetics as well as the dissolution rate of the drug were investigated. The results show that the dissolution rate increases with the increasing of polymer concentration and core wall ratio. The release of microcapsules prepared with different procedures can be selectively profiled with first order and Higuchi matrix kinetic models.展开更多
In this study we used the deep eutectic solvents (ionic liquids) to investigate the reaction between copper (II) with ethylene diamine (en). Two of the existing methods for analyzing spectrophotometric measurements ha...In this study we used the deep eutectic solvents (ionic liquids) to investigate the reaction between copper (II) with ethylene diamine (en). Two of the existing methods for analyzing spectrophotometric measurements have been applied for establishing, the stoichiometry and whenever possible, the stability constants of the chelates formed. The method of continuous variations was necessary to determine first whether, the metal ion and the ligand ethylene diamine form one or more than one chelate, when more than one chelate formed, the results obtained depend on the wavelength and for meaningful conclusions the wavelengths were carefully selected. The empirical formulae of the chelates were further substantiated by the molar ratio method. The effect of time and temperature on the formation and stability of these chelates in solution is also studied. The stability constants, K1 and K2 for the copper (II) chelates were calculated, though reliable, and are comparable to literature values.展开更多
The nanoparticles of polylactide (PLA) and poly(lactide-co-glycolide) (PLGA) were prepared by the bi-nary organic solvent diffusion method. The yield, particle size and size distribution of these nanoparticles wereeva...The nanoparticles of polylactide (PLA) and poly(lactide-co-glycolide) (PLGA) were prepared by the bi-nary organic solvent diffusion method. The yield, particle size and size distribution of these nanoparticles wereevaluated. The yield of nanoparticles prepared by this method is over 90%, and the average size of the nanoparticlesis between 130-180 nm. In order to clarify the effect of the organic solvent used in the system on nanoparticle yieldand size, the cloud points of PLA and PLGA were examined by cloud point titration. The results indicate that theyields of nanoparticles increase with the increase of ethanol in the acetone solution and attain the maximum at thecloud point of ethanol, while the size of nanoparticles decreases with the increase of ethanol in the acetone solutionand attains the minimum at the cloud point of ethanol. The optimal composition ratio of binary organic solvents coin-cides to that near the cloud point and the optimal condition of binary organic solvents can be predicted.展开更多
The influence of solvent and the rate of addition of water on the characteristics of alumina-zirconia powders obtained by sol-gel method were investigated. The Al2O3-ZrO2 powders (1:1 molar ratio) were prepared using ...The influence of solvent and the rate of addition of water on the characteristics of alumina-zirconia powders obtained by sol-gel method were investigated. The Al2O3-ZrO2 powders (1:1 molar ratio) were prepared using aluminum tri-sec-butoxide and zirconium n-propoxide as precursors. Ethanol (EtOH), isopropanol (iPrOH) and isobutanol (iBuOH) were used as solvents. The Al2O3-ZrO2 powders were characterized by nitrogen physisorption (SBET), Fourier transformed infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Prepared oxides calcined at 700℃ showed high specific surface area (200 - 240 m2/g). Obtained results suggest that the homogeneity of the mixed oxides is favored by using a water addition rate of 0.06 and 0.10 mL/min with ethanol as solvent.展开更多
Rice husk high boiling solvent lignin （RHL） was prepared by high boiling solvent method, and its characteristics was analyzed by using chemical composition analysis, infrared spectroscopy, and ^1H-NMR and ^13C-NMR s...Rice husk high boiling solvent lignin （RHL） was prepared by high boiling solvent method, and its characteristics was analyzed by using chemical composition analysis, infrared spectroscopy, and ^1H-NMR and ^13C-NMR spectroscopy. The optimum prepared condition was that the rice husk with 70%-90% aqueous solution of 1, 4-butanediol was mixed with autoclave, under a certain weight ratio of solid raw material and solvent, heated to 200-220℃ for 1.0-3.0 h, then water-insoluble RHL was separated from the liquor reaction mixture by water precipitation. Results suggested that the lower digestion temperature and concentration of 1,4-butanediol were both unfavorable for extracting lignin. Chemical weight-average molecular weight of RHL was 1939 g·mol^-1, and the residual polysaccharide content was 5.12%. The ^1H-NMR spectra of RHL showed the relative intensity ratio, aliphatic over aromatic methoxyl groups, situated at 3.5-3.8 and 3.8-4.0 ppm, respectively. The results from ^13C-NMR spectra showed that β-O-4 bond and β-5 carbon-carbon linkage were the major linkages between RHL units. The C9-formula of RHL was calculated by the experiment data.展开更多
文摘An O / W emulsion non-solvent addition method was used to prepare ethyleellulose (EC) microcapsules of water soluble pharmaceutical (theophylline). The solvent and non-solvent reagents used in this work were toluene and cyclohexane. The effects of polymer concentration, core wall ratio and particle size on the kinetics as well as the dissolution rate of the drug were investigated. The results show that the dissolution rate increases with the increasing of polymer concentration and core wall ratio. The release of microcapsules prepared with different procedures can be selectively profiled with first order and Higuchi matrix kinetic models.
文摘In this study we used the deep eutectic solvents (ionic liquids) to investigate the reaction between copper (II) with ethylene diamine (en). Two of the existing methods for analyzing spectrophotometric measurements have been applied for establishing, the stoichiometry and whenever possible, the stability constants of the chelates formed. The method of continuous variations was necessary to determine first whether, the metal ion and the ligand ethylene diamine form one or more than one chelate, when more than one chelate formed, the results obtained depend on the wavelength and for meaningful conclusions the wavelengths were carefully selected. The empirical formulae of the chelates were further substantiated by the molar ratio method. The effect of time and temperature on the formation and stability of these chelates in solution is also studied. The stability constants, K1 and K2 for the copper (II) chelates were calculated, though reliable, and are comparable to literature values.
基金Project ( 2001AA218011) supported by the National High Technology Development "863" Program of China
文摘The nanoparticles of polylactide (PLA) and poly(lactide-co-glycolide) (PLGA) were prepared by the bi-nary organic solvent diffusion method. The yield, particle size and size distribution of these nanoparticles wereevaluated. The yield of nanoparticles prepared by this method is over 90%, and the average size of the nanoparticlesis between 130-180 nm. In order to clarify the effect of the organic solvent used in the system on nanoparticle yieldand size, the cloud points of PLA and PLGA were examined by cloud point titration. The results indicate that theyields of nanoparticles increase with the increase of ethanol in the acetone solution and attain the maximum at thecloud point of ethanol, while the size of nanoparticles decreases with the increase of ethanol in the acetone solutionand attains the minimum at the cloud point of ethanol. The optimal composition ratio of binary organic solvents coin-cides to that near the cloud point and the optimal condition of binary organic solvents can be predicted.
文摘The influence of solvent and the rate of addition of water on the characteristics of alumina-zirconia powders obtained by sol-gel method were investigated. The Al2O3-ZrO2 powders (1:1 molar ratio) were prepared using aluminum tri-sec-butoxide and zirconium n-propoxide as precursors. Ethanol (EtOH), isopropanol (iPrOH) and isobutanol (iBuOH) were used as solvents. The Al2O3-ZrO2 powders were characterized by nitrogen physisorption (SBET), Fourier transformed infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Prepared oxides calcined at 700℃ showed high specific surface area (200 - 240 m2/g). Obtained results suggest that the homogeneity of the mixed oxides is favored by using a water addition rate of 0.06 and 0.10 mL/min with ethanol as solvent.
基金This study was sponsored by the Research Funding for Key Laboratory of Cellulose and Ligno cellulosics Chemistry, Guangzhou Institute of Chemistry, Chinese Academy of Sciences (No. LCLC-2004-158)the National Natural Science Foundation of Fujian(No. Z0513015)
文摘Rice husk high boiling solvent lignin （RHL） was prepared by high boiling solvent method, and its characteristics was analyzed by using chemical composition analysis, infrared spectroscopy, and ^1H-NMR and ^13C-NMR spectroscopy. The optimum prepared condition was that the rice husk with 70%-90% aqueous solution of 1, 4-butanediol was mixed with autoclave, under a certain weight ratio of solid raw material and solvent, heated to 200-220℃ for 1.0-3.0 h, then water-insoluble RHL was separated from the liquor reaction mixture by water precipitation. Results suggested that the lower digestion temperature and concentration of 1,4-butanediol were both unfavorable for extracting lignin. Chemical weight-average molecular weight of RHL was 1939 g·mol^-1, and the residual polysaccharide content was 5.12%. The ^1H-NMR spectra of RHL showed the relative intensity ratio, aliphatic over aromatic methoxyl groups, situated at 3.5-3.8 and 3.8-4.0 ppm, respectively. The results from ^13C-NMR spectra showed that β-O-4 bond and β-5 carbon-carbon linkage were the major linkages between RHL units. The C9-formula of RHL was calculated by the experiment data.
