Template synthesis of copper azide primary explosive through Cu2O@HKUST-1 core-shell composite prepared by “bottle around ship” method

Copper azide(CA), as a primary explosive with high energy density, has not been practically used so far because of its high electrostatic sensitivity. The Cu2O@HKUST-1 core-shell structure hybrid material was synthesized by the “bottle around ship” methodology in this research by regulating the dissolution rate of Cu2O and the generation rate of metal-organic framework(MOF) materials. Cu2O@HKUST-1 was carbonized to form a Cu O@porous carbon(CuO@PC) composite material. CuO@PC was synthesized into a copper azide(CA) @PC composite energetic material through a gas-solid phase in-situ azidation reaction.CA is encapsulated in PC framework, which acts as a nanoscale Faraday cage, and its excellent electrical conductivity prevents electrostatic charges from accumulating on the energetic material’s surface. The CA@PC composite energetic material has a CA content of 89.6%, and its electrostatic safety is nearly 30times that of pure CA(1.47 mJ compared to 0.05 mJ). CA@PC delivers an outstanding balance of safety and energy density compared to similar materials.

Synthesis and Characterization of Hollow Strontium Carbonate Pompons by Composite Soft Template Method

The hollow strontium carbonate pompons was synthesized for the first time by a controlled reaction precipitation method with sodium dodecyl benzene sulfonate(SDBS)and polyvinyl pyrrolidone(PVP)work together as template.The sampled particles were characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),nitrogen adsorption-desorption measurement,X-ray diffraction(XRD),Energy dispersive X-Ray spectroscopy(EDX),Fourier transform infrared spectroscopy(FTIR),Thermogravimetric analysis and differential scanning calorimetry(TGA-DSC),etc.It is shown that the assynthesized hollow strontium carbonate pompons with the size of about 2μm consist of flake-like particles under the optimal reaction conditions.The formation mechanism of hollow strontium carbonate pompons was preliminarily explored.

Template Polymerization Based on Stober Method:an Improved Method for Fabrication of Hollow Polysiloxane Spheres

A modified Stober method has been developed which permits the controlled growth of spherical hollow spheres with diameters between 197 and 208 nanometers by consecutively cocondensed methyltrimethoxysilane and dimethyldimethoxysilane monomers onto microemulsion of polydimethylsiloxane and subsequently removing the templated polydimethylsiloxane by exposure to solvents. Ammonia was used as a morphological catalyst. The morphology of the polymer spheres was demonstrated by transmission electron micrographs （TEM） and atomic force microscopy （AFM）.

Synthesis of mesoporous carbon as electrode material for supercapacitor by modified template method

The pore structures and electrochemical performances of mesoporous carbons prepared by silica sol template method as electrode material for supercapacitor were investigated. The mean pore size and mass specific capacitance of the mesoporous carbons increase with the increase of mass ratio of silica sol to carbon source （glucose）. A modified template method, combining silica sol template method and ZnCl2 chemical activation method, was proposed to improve the mass specific capacitance of the mesoporous carbon with an improved BET surface area. The correlation of rate capability and pore structure was studied by constant current discharge and electrochemical impedance spectroscopy. A commercially available microporous carbon was used for comparison. The result shows that mesoporous carbon with a larger pore size displays a higher rate capability. Mesoporous carbon synthesized by modified template method has both high mass specific capacitance and good rate capability.

Preparation and Characterization of Polyaniline Nanofibers by Template-free Method

In the presence of p-toluene sulfonic acid (TSA) as a dopant, polyaniline (PAni) nanofibers, (about 80^-65 nm in diameter) were successfully synthesized with a chemical template-free method. It was found that the formation probability, morphology, and diameter of the resulting PAni-TSA nanofibers were sensitive to the synthetic conditions, such as reaction temperature, the molar ratio of TSA to aniline, and the concentration of TSA in the polymerization media. The molecular structure was characterized by using the FT-IR, Raman spectra and X-ray diffraction, which shows that the main chain structure of PAni-TSA nanofibers was in agreement with that of granular PAni.

Structures and Properties of PEDOT Nanotubes Prepared by a Template Synthesis Method

PEDOT nanotubes were prepared by a template synthesis method. Based on our template, it was deduced that there are two successive processes in the formation of nanotubes. The first step is soakage of the porous templates by a polymer solution, and the second step is adsorption of free charged cationic groups and doped PEDOT onto the template surface with negative charges. XRD results showed that well orientated PEDOT chains were formed during the synthesis, moreover the arrange conductivity of molecular chains strongly affect the structures of PEDOT nanotubes. The nanotubes were measured to be about 5.5-17.6 S/cm, which is higher than that of nanotube pellet due to the high contact resistance between the adjacent nanotubes.

A Method for Preparation of Ordered Porous Silicon Based on a 2D SiO_2 Template

A new method for fabricating ordered porous silicon is reported. A two-dimensional silica nanosphere array is used as a template with a hydrofluoric acid-hydrogen peroxide solution for etching the nanospheres. The initial diameter and distribution of the holes in the resulting porous silicon layer are determined by the size and distribution of the silica nanospheres. The corrosion time can be used to control the depths of the holes. It is found that the presence of a SiO2 layer, formed by the oxidation of the rough internal surface of the hole, is the primary reason allowing the corrosion to proceed. Ultraviolet reflection and thermal conductivity measurements show that the diameter and distribution of the holes have a great influence on properties of the porous silicon.

Preparation of ZrO_(2) Fibers by Template Impregnation Method

Viscose fiber templates(15 cm×15 cm×1 cm)were put into ZrOCl_(2) solutions of different concentrations(1,2 and 3 mol·L^(-1))and impregnated at different temperatures(20,40 and 60℃)for 20 h.After washing,centrifugation and drying,ZrO_(2) fiber precursors were obtained.ZrO_(2) fibers were prepared by heat treatment of the precursors at different temperatures(600,800,1000 and 1200℃)for 2 h.The effects of the impregnation temperature,the impregnation solution concentration and the heat treatment temperature on the microstructure and the phase composition of the ZrO_(2) fibers were studied.The results show that with the increase of the impregnation temperature from 20℃to 60℃and the impregnation solution concentration increase from 1 mol·L^(-1) to 3 mol·L^(-1),the microstructure of fiber cross section changes from flat to cylindrical,and the average fiber diameter increases,indicating that the increase of the impregnation solution concentration and the impregnation temperature is beneficial to increasing the adsorption capacity of Zr4+on viscose fiber templates.After heat treatment,ZrO_(2) fiber mainly exists in the form of monoclinic ZrO_(2).With the increase of the heat treatment temperature,the grains in ZrO_(2) fibers become larger and the crystallinity degree increases,meanwhile the fiber surface undergoes a transition from smooth to small grains and then to cracks.

Preparation and CO conversion activity of ceria nanotubes by carbon nanotubes templating method

Ceria nanotubes with high CO conversion activity by means of carbon nanotubes as removable templates in the simple liquid phase process were fabricated under moderate conditions. The pristine CNTs were first pretreated by refluxing in a 30% nitric acid solution at 140 ℃ for 24 h, then dispersed in an ethanolic Ce（NO3）3.6H2O solution with ultrasonic radiation at room temperature for 1 h. Under vigorous stirring, NaOH solution was added drop by drop into the above ethanolic solution until the pH value was 10. The product was collected and repeatedly washed with ethanol and on drying at 60 ℃, the CeO2/CNT composites were obtained. Then, the as-prepared composites were heated at 450 ℃ in an air atmosphere for 30 min to remove CNTs. The ceria nanotubes were characterized by X-Ray Diffraction （XRD）, Transmission Electron Microscopy （TEM）, and X-Ray Photoelectron Spectrum （XPS）. The results showed that the ceria nanotubes were polycrystalline face-centered cubic phase and were composed of lots of dense cefia nanoparficles. The diameter of cefia nanotubes was about 40-50 nm. Catalytic activity of the product for CO oxidation was carded out at the region of 30-300 ℃ in a U-shaped quartz reactor with feeding about 0.15 g of the catalyst, which was loaded on Al2O3 carder. The inlet gas composition was 1.0% CO and 28% O2 with N2 as balance, and the rate of flow was kept at 40 ml/min. The catalytic products were analyzed by gas chromatography. The as-repared CeO2 nanotubes showed higher CO oxidation activity, which indicated that the morphology of ceria products affected the catalytic performance. The ceria nanotubes supported on Al2O3 demonstrated that conversion temperature for CO oxidation to CO2 was lower than that for bulk catalysts.

Sol-Gel Template Synthesis and Photocatalytic Activity of TiO_2 Nanofibrils Loaded on Al_2O_3 Template

TiO2 nanofibrils were prepared within the pores of alumina template membrane by use of sol-gel chemistry. The TiO2 nanofibrils have good crystallinity and size. There is agglomeration free among the particulates of TiO2 and the fibrils show high catalytic activity.

Synthesis of mesoporous cerium-zirconium mixed oxides by hydrothermal templating method

Mesoporous cerium-zirconium mixed oxides were prepared by hydrothermal method using cetyl trimethyl ammonium bromide (CTAB) as template. The effects of amount of template, pH value of solution and hydrothermal temperature on mesostructure of samples were systematically investigated. The final products were characterized by XRD, TEM, FT-IR, and BET. The results indicate that all the cerium-zirconium mixed oxides present a meso-structure. At molar ratio of n(CTAB)/n((Ce)+(Zr))= 0.15, pH value of 9, and hydrothermal temperature of 120 ℃, the samples obtained possess a specific surface area of 207.9 m2/g with pore diameter of 3.70 nm and pore volume of 0.19 cm3/g.

Tuning of the periodicity of stable self-organized metallic templates

The atomic and electronic structures of Pb bilayer/Pt（111） are investigated with two theoretical calculations. We find that the stable （2 × 2）/（3 × 3） Pb/Pt（lll） structure is a promising candidate for being used as a template with self-organized ordered Pb semi-cluster array on the first Pb monolayer. This stable structure can realize the ordered Au single-atom array around the Pb semi-clusters that can cause selective adsorption of noble atoms. The size of Pb magic number semi-cluster plays a more important role in determining the periodicity of the template than the lattice constant misfit between the substrate and the overlayer. This leads to quite a different periodicity between the two stable templates, which are （2 × 2）/（3 × 3） Pb/Pt（111） and Pb/Cu（111）. Therefore, by considering the size of the stable semi-clusters and carefully selecting different substrate materials, we can tune the density of Pb semi-clusters as the nucleation points and then tune the periodicity of the stable template.

Preparation of High Surface Area, Large Pore Volume Alumina by Using β-Cyclodextrin as a Non-surfactant Template

A series of alumina samples were prepared using β-cyclodextrin as the non-surfactant template. These samples were characterized by XRD, BET and TEM. The results showed that the alumina samples prepared using β-cyclodextrin template had the higher surface areas （124-484 m^2/g）, larger pore volumes （0.7-1.27 mL/g） and more thermal stability than samples prepared without using β-cyclodextrin.

A Template-Based Approach for Automatic Mapping between Business Process and BPEL Process

In order to support just-in-time reconfiguration of business process execution language （BPEL） process, a template-based mapping method is proposed to map business level process to BPEL process. The method builds up mapping relationships between the key points of business level process and BPEL process, which helps users to adjust the business level process with simplified operations, and automatically maps the changes to BPEL. In addition, a case of the application of the method in a clothing enterprise was illustrated.

Stress and strain analysis of Si-based Ⅲ-V template fabricated by ion-slicing

Strain and stress were simulated using finite element method(FEM)for threeⅢ-V-on-Insulator(Ⅲ-VOI)structures,i.e.,InP/SiO2/Si,InP/Al2O3/SiO2/Si,and GaAs/Al2O3/SiO2/Si,fabricated by ion-slicing as the substrates for optoelectronic devices on Si.The thermal strain/stress imposes no risk for optoelectronic structures grown on InPOI at a normal growth temperature using molecular beam epitaxy.Structures grown on GaAsOI are more dangerous than those on InPOI due to a limited critical thickness.The intermedia Al2O3 layer was intended to increase the adherence while it brings in the largest risk.The simulated results reveal thermal stress on Al2O3 over 1 GPa,which is much higher than its critical stress for interfacial fracture.InPOI without an Al2O3 layer is more suitable as the substrate for optoelectronic integration on Si.

Glycerol-Based Carbon-SO₃H Catalyzed Benign Synthetic Protocol for the Acetylation of Alcohols, Phenols and Amines under Solvent-Free Conditions

A simple and efficient solvent-free method was developed for the acetylation of alcohols, phenols and amines in excellent yields employing glycerol-based sulfonic acid (-SO3H) functionalized carbon catalyst under environmentally benign reaction conditions. The salient features of this protocol are the short reaction time, ease of product isolation and reusability of the carbon catalyst.

Synthesis of Octylmethoxycinamate-silica Core-shell Nanoparticles with Self-templating Method

t A self-templating method was employed to synthesize core-shell nanoparticles with octylmethoxycinamate（OMC）, a well-known organic UV absorber, as core and nanosilica particles as shell. The characteristic of this method is that the whole process requires neither surface treatment for nanosilica particles nor additional surfactant or stabilizer, and all the reactions could be finished in one-pot, which exempts removing template and reduces reaction steps compared to the conventional process. The morphology, structure, particle size distribution, chemical composition and optical property of OMC-SiO2 nanoparticles were characterized by scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, dynamic light scattering（DLS）, FTIR spectrometry and UV absorption spectrometry, respectively. Experiment results indicate that the resulting OMC-SiO2 nanoparticles were perfectly spherical with smooth particle surfaces, and had clear core-shell structures. The particle size could be tuned by altering reaction conditions. In addition, the mechanism of the self-templating method for forming core-shell nanoparticles was discussed.

煤焦油衍生模板碳孔隙重整及高体积电容性能

各类储能器件中,超级电容器因其功率密度高、充放电速度超快、循环寿命长等优点,是电化学储能技术的重要发展方向。其中,多孔碳电极是超级电容的核心材料。然而,传统多孔碳电极材料重点关注高孔隙率和高比面积的实现,从而导致疏松的碳骨架结构,使材料密度降低,进一步限制了超级电容器的体积性能。因此,具有合理孔隙结构和致密骨架的碳电极材料是提升双电层电容器体积性能的关键。以低成本煤焦油为碳源,对基于相转变过程制备的不同模板材料进行包覆后碳化,获得具有致密多孔结构的碳纳米片PCS。该材料中优化的分级孔结构降低了多余的中/大孔占比,使其具有高堆积密度(0.64 g/cm^(3)),可同时实现优异的质量和体积比电容性能。在水系双电层电容器中,制备的PCS电极在低质量负载2 mg/cm^(2)时可以获得277 F/cm^(3)的高体积比电容;在高质量负载8 mg/cm^(2)时,体积比电容仍保持244 F/cm^(3),且最大体积能量密度和功率密度分别为8.46 Wh/L和10.9 kW/L。此外,双电层对称电容器也表现出优异的循环稳定性(超过4万次循环),证明了PCS在双电层电容器高密度储能方面的应用潜力。

光伏电站理论发电功率的优化计算模型与方法

光伏电站理论发电功率计算结果的准确性直接影响弃光电量的统计,对电网调度及光伏发展规划影响重大。理论发电功率的传统计算方法有样板逆变器法和气象数据外推法,当样板逆变器的出力受到限制时,样板逆变器法计算结果不准确,而气象数据外推法参数众多且难以确定。针对上述问题,提出了一种光伏电站理论发电功率优化计算方法。首先,介绍了样板逆变器法和气象数据外推法的计算原理,并分析了两种方法的特点和不足。然后,基于光伏电站历史出力及气象信息,提出了改进样板逆变器法和改进气象数据外推法。在实际应用中,当弃光未发生或者在弃光初始阶段采用计算精度更高的改进样板逆变器法开展计算,当样板逆变器出力受到限制时,切换至改进气象数据外推法进行求解。最后,对国内某光伏电站在不同气象条件下开展仿真计算,验证了所提方法的合理性和有效性。

基于柔性应变传感器的数据手套手势识别研究

针对传统手势识别系统识别率不高、响应不稳定等问题,设计了一个包括柔性传感器、信号采集系统、手势识别算法的柔性应变传感器数据手套手势识别系统。该系统可准确捕捉每根手指关节运动信息,具有高自由度、低成本、高识别率等特点。在软硅胶材料中掺杂特定配比的碳黑(CB)和碳纳米管(CNTs),通过转印技术设计出线性度好、灵敏度高的电阻式传感器。实验结果表明,传感器具有较好的静态、动态响应特性,并完成传感器标定;利用多个柔性传感器制备数据手套并搭建信号采集系统,进一步提出融合BP神经网络和模板匹配技术的手势识别方法,以提升相近手势字母识别率,算法识别率为98.5%;针对不同人群开展手势识别实验,结果表明,该手势识别系统准确率达到92.8%,响应时间约40ms,该数据手套具有较好的应用潜力。