One-dimensional carbon nano-materials （ODCNMs） synthesized from ethanol flames exhibit various agglomerated morphologies, such as ＂chrysanthemum-like＂, ＂hairball-like＂ or ＂orange-peel-like＂, ＂vertically alig...One-dimensional carbon nano-materials （ODCNMs） synthesized from ethanol flames exhibit various agglomerated morphologies, such as ＂chrysanthemum-like＂, ＂hairball-like＂ or ＂orange-peel-like＂, ＂vertically aligned＂ and ＂wrinkling-pileup＂. The present work studied the agglomerating process and the growth mechanism by using scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. It is thought that the size and distribution of the catalyst particles produced from pretreatment of the substrates play a key role during the formation of agglomerations. It is expected that the steady growth of ODCNMs in flames will be improved through the preparation of the catalysts.展开更多
A dynamic quasi-continuum model is presented to analyze free vibration of plate-type cubic crystal nano-materials.According to the Hamilton principle,fundamental governing equations in terms of displacement components...A dynamic quasi-continuum model is presented to analyze free vibration of plate-type cubic crystal nano-materials.According to the Hamilton principle,fundamental governing equations in terms of displacement components and angles of rotations are given.As an application of the model,the cylindrical bending deformation of the structure fixed at two ends is analyzed,and a theoretical formula evaluating the fundamental frequency is obtained by using Galerkin's method.Meanwhile,the solution for the classical continuous plate model is also derived,and the size-dependent elastic modulus and Poisson's ratio are taken in computation.The frequencies corresponding to different atomic layers are numerically presented for the plate-type NaC l nano-materials.Furthermore,a molecular dynamics(MD)simulation is conducted with the code LAMMPS.The comparison shows that the present quasi-continuum model is valid,and it may be used as an alternative model,which reflects scale effects in analyzing dynamic behaviors of such plate-type nano-materials.展开更多
On February 28th, 2005, AQSIQ (the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China), and SAC (the Standardization Administration of P. R. China)jointly ho...On February 28th, 2005, AQSIQ (the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China), and SAC (the Standardization Administration of P. R. China)jointly hosted the press conference on seven items of national standards on nano-materials in Beijing. The seven items of national standards were approved on Sept. 29th and Dec. 27th, 2004 respectively by SAC, and publicized in Jan. 2005. They will be formally put into practice from April 1st, 2005.展开更多
The Al2O3（p）/Al nano-composites were fabricated from Al-K2ZrF6-Na2B4O7 system by sonochemistry in situ reaction. The fabrication mechanisms, including high intensity ultrasonic influence on microstructures and reinf...The Al2O3（p）/Al nano-composites were fabricated from Al-K2ZrF6-Na2B4O7 system by sonochemistry in situ reaction. The fabrication mechanisms, including high intensity ultrasonic influence on microstructures and reinforcement particles-aluminum matrix interface, were investigated by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The XRD results show that the component of the as-prepared composites is Al2O3 reinforcement. The SEM analysis results indicate that Al2O3 particles are uniformly distributed in the aluminum matrix. The TEM results show that the morphologies of Al2O3 particles present in nearly sphere-shape, the sizes are in the range of 20-100 nm, and the interfaces are net and no interfacial outgrowth is observed. Analysis with secondary development Image-J software shows that Al2O3 recoveries are firstly improved and then decreased with increasing ultrasonic power. When the power is 0.4 kW, the distribution is the best, and a maximum number of particles are obtained. The reaction mechanisms were investigated.展开更多
Nanocrystalline TiO 2 has been studied extensively in recent years as photocatalysts to deal with environmental pollutions, such as water purification, wastewater treatment and air purification. Here a novel sonochemi...Nanocrystalline TiO 2 has been studied extensively in recent years as photocatalysts to deal with environmental pollutions, such as water purification, wastewater treatment and air purification. Here a novel sonochemical method for directly preparing anatase nanocrystalline TiO 2 has been established. Nanocrystalline TiO 2 were synthesized by the hydrolysis of titanium tetrabutyl in the presence of water and ethanol under a high intensity ultrasonic irradiation(20 kHz, 100 W/cm 2) at 363 K for 3 h. The structure and particle sizes of the product were dependent upon the reaction temperature, the acidity of the medium and the reaction time. Characterization was accomplished by using various different techniques, such as powder X ray diffraction(XRD), transmission electron microscopy(TEM), thermogravimetry differential thermal analysis(TG DTA) and Fourier transform infrared(FTIR) spectroscopy. The TEM images showed that the particles of TiO 2 were columnar in shape and the average sizes were ca. 3 nm×7 nm . The formation mechanism of nanocrystalline TiO 2 under a high intensity ultrasonic irradiation was also investigated. The hydrolytic species of titanium tetrabutyl in water condensed to form a large number of tiny gel nuclei which aggregated to form larger clusters. Ultrasound irradiation generated a lot of local hot spots within the gel and the crystal structural unit was formed near the hot spots with the decrease of the gel nuclei, which lead to form nanocrystal particles.展开更多
Ag2S/Ag2WO4 composite microrods,with lengths of 0.2-1μm and diameters of 20-30 nm,were fabricated by a facile sonochemical route.The as-synthesized products were intensively investigated by a series of physicochemica...Ag2S/Ag2WO4 composite microrods,with lengths of 0.2-1μm and diameters of 20-30 nm,were fabricated by a facile sonochemical route.The as-synthesized products were intensively investigated by a series of physicochemical characterizations,such as N2 physical adsorption,X-ray diffraction,scanning electron microscopy,transmission electron microscopy,Fourier transform infrared spectroscopy,diffuser reflectance spectroscopy,X-ray photoelectron spectroscopy,photoluminescence spectroscopy and photocurrent response measurements.Ultrasonic irradiation yields an obvious improvement in the photocatalyst texture,for example,an increase in crystallinity and surface area.Moreover,sonochemically fabricated Ag2S/Ag2WO4 microrods display strong visible light absorption and a high transient photocurrent response.The produced intimate Ag2S/Ag2WO4interface between Ag2S and Ag2WO4 crystal phases largely promotes the separation of photogenerated holes and electrons.High photocatalytic activity and stability were obtained over Ag2S/Ag2WO4composite microrods.The dye degradation rate constant of Ag2S/Ag2WO4 was 4.7 times and 29.8times higher than that of bare Ag2WO4 and Ag2S,respectively.展开更多
基金Supported by the Scientific Research Foundationfor the Returned Overseas Chinese Scholars of Chinese Ministry Edu-cation (200233)
文摘One-dimensional carbon nano-materials （ODCNMs） synthesized from ethanol flames exhibit various agglomerated morphologies, such as ＂chrysanthemum-like＂, ＂hairball-like＂ or ＂orange-peel-like＂, ＂vertically aligned＂ and ＂wrinkling-pileup＂. The present work studied the agglomerating process and the growth mechanism by using scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. It is thought that the size and distribution of the catalyst particles produced from pretreatment of the substrates play a key role during the formation of agglomerations. It is expected that the steady growth of ODCNMs in flames will be improved through the preparation of the catalysts.
文摘A dynamic quasi-continuum model is presented to analyze free vibration of plate-type cubic crystal nano-materials.According to the Hamilton principle,fundamental governing equations in terms of displacement components and angles of rotations are given.As an application of the model,the cylindrical bending deformation of the structure fixed at two ends is analyzed,and a theoretical formula evaluating the fundamental frequency is obtained by using Galerkin's method.Meanwhile,the solution for the classical continuous plate model is also derived,and the size-dependent elastic modulus and Poisson's ratio are taken in computation.The frequencies corresponding to different atomic layers are numerically presented for the plate-type NaC l nano-materials.Furthermore,a molecular dynamics(MD)simulation is conducted with the code LAMMPS.The comparison shows that the present quasi-continuum model is valid,and it may be used as an alternative model,which reflects scale effects in analyzing dynamic behaviors of such plate-type nano-materials.
文摘On February 28th, 2005, AQSIQ (the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China), and SAC (the Standardization Administration of P. R. China)jointly hosted the press conference on seven items of national standards on nano-materials in Beijing. The seven items of national standards were approved on Sept. 29th and Dec. 27th, 2004 respectively by SAC, and publicized in Jan. 2005. They will be formally put into practice from April 1st, 2005.
基金Project (50971066) supported by the National Natural Science Foundation of ChinaProject (20070299004) supported by the Research Fund for the Doctoral Program of Higher Education of China+1 种基金Project (2008-46) supported by the Jiangsu Provincial ‘333’ Project of training the High-level Talents Foundation, ChinaProject (BE2009127) supported by the Jiangsu Provincial Science Supporting Item, China
文摘The Al2O3（p）/Al nano-composites were fabricated from Al-K2ZrF6-Na2B4O7 system by sonochemistry in situ reaction. The fabrication mechanisms, including high intensity ultrasonic influence on microstructures and reinforcement particles-aluminum matrix interface, were investigated by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The XRD results show that the component of the as-prepared composites is Al2O3 reinforcement. The SEM analysis results indicate that Al2O3 particles are uniformly distributed in the aluminum matrix. The TEM results show that the morphologies of Al2O3 particles present in nearly sphere-shape, the sizes are in the range of 20-100 nm, and the interfaces are net and no interfacial outgrowth is observed. Analysis with secondary development Image-J software shows that Al2O3 recoveries are firstly improved and then decreased with increasing ultrasonic power. When the power is 0.4 kW, the distribution is the best, and a maximum number of particles are obtained. The reaction mechanisms were investigated.
文摘Nanocrystalline TiO 2 has been studied extensively in recent years as photocatalysts to deal with environmental pollutions, such as water purification, wastewater treatment and air purification. Here a novel sonochemical method for directly preparing anatase nanocrystalline TiO 2 has been established. Nanocrystalline TiO 2 were synthesized by the hydrolysis of titanium tetrabutyl in the presence of water and ethanol under a high intensity ultrasonic irradiation(20 kHz, 100 W/cm 2) at 363 K for 3 h. The structure and particle sizes of the product were dependent upon the reaction temperature, the acidity of the medium and the reaction time. Characterization was accomplished by using various different techniques, such as powder X ray diffraction(XRD), transmission electron microscopy(TEM), thermogravimetry differential thermal analysis(TG DTA) and Fourier transform infrared(FTIR) spectroscopy. The TEM images showed that the particles of TiO 2 were columnar in shape and the average sizes were ca. 3 nm×7 nm . The formation mechanism of nanocrystalline TiO 2 under a high intensity ultrasonic irradiation was also investigated. The hydrolytic species of titanium tetrabutyl in water condensed to form a large number of tiny gel nuclei which aggregated to form larger clusters. Ultrasound irradiation generated a lot of local hot spots within the gel and the crystal structural unit was formed near the hot spots with the decrease of the gel nuclei, which lead to form nanocrystal particles.
基金supported by the National Natural Science Foundation of China(21567008,21263005)the Yangfan Project of Guangdong Province+2 种基金the Natural Science Foundation of Jiangxi Province(20133BAB21003,20161BAB203090)the Landing Project of Science and Technology of Colleges and Universities in Jiangxi Province(KJLD14046)the Graduate Innovation Project of Jiangxi Province(YC2015-S293)~~
文摘Ag2S/Ag2WO4 composite microrods,with lengths of 0.2-1μm and diameters of 20-30 nm,were fabricated by a facile sonochemical route.The as-synthesized products were intensively investigated by a series of physicochemical characterizations,such as N2 physical adsorption,X-ray diffraction,scanning electron microscopy,transmission electron microscopy,Fourier transform infrared spectroscopy,diffuser reflectance spectroscopy,X-ray photoelectron spectroscopy,photoluminescence spectroscopy and photocurrent response measurements.Ultrasonic irradiation yields an obvious improvement in the photocatalyst texture,for example,an increase in crystallinity and surface area.Moreover,sonochemically fabricated Ag2S/Ag2WO4 microrods display strong visible light absorption and a high transient photocurrent response.The produced intimate Ag2S/Ag2WO4interface between Ag2S and Ag2WO4 crystal phases largely promotes the separation of photogenerated holes and electrons.High photocatalytic activity and stability were obtained over Ag2S/Ag2WO4composite microrods.The dye degradation rate constant of Ag2S/Ag2WO4 was 4.7 times and 29.8times higher than that of bare Ag2WO4 and Ag2S,respectively.
