Soot Distribution and Thermal Regeneration of Marine Diesel Particulate Filter

Diesel particulate filter(DPF)is a leading technology reducing particle emissions from marine diesel engines.The removal or regeneration of soot in DPF is an important issue.The purpose of this study is to provide some reference strategies to design the DPF for marine diesel engines.In this paper,a mathematical model of a marine DPF was built up and the particle trap process and the regeneration dynamics were simulated.The results show that the cake soot mass concentrations from 0 to 4.2 g/L during the trap process increase linearly with the increase of the exhaust gas flows while the depth soot mass concentrations from 0 to 2.2 g/L firstly increase linearly and then keep constant.Soot is mainly concentrated in the front and rear portion of the filter and less soot is in the middle.The soot distribution in the cake and depth layers shows the unevenness during the trap and regeneration process.The initial soot loadings have great effects on pressure drops and soot mass concentrations before regeneration,but the little effect after regeneration.The exhaust gas temperature heated to 850 K can achieve 94%efficiency for the DPF regeneration.The heating rate has no effects on the pressure drops and soot mass concentrations,but the heating duration time of exhaust gas has an important impact on them.

Soot particle distributions inside a diesel particulate filter during soot loading in plateau environment

A three-dimensional diesel particulate filter(DPF)simulation model was developed by using AVL software FIRE to study the effects of four factors on soot particle distributions along the axial and radial directions in the DPF after the model accuracy was validated.An orthogonal test method was used to determine the importance and weights of the design of experiments(DoE)factors such as the expanding angle,the number of channels per square inch,and the exhaust mass flow rate.The effects of these factors on the uniformity of the soot particle distributions were also analyzed.The results show that when the soot loading time was 400 s,the soot particles inside the DPF along the axial direction exhibited a bowl shape,which was high on the both ends and low in the middle.The uniformity of the axial distribution of soot particles reduces significantly with an increase in the number of channels per square inch.The uniformity of the radial distribution reduced with an increase in the expanding angle of the divergent tube.Based on the impacts on the axial uniformity,the three most influencing factors in a descending order are the number of channels per square inch,the exhaust mass flow rate,and the expanding angle of the divergent tube.