期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Experimental study on correlation between turbulence and sound in a subsonic wind tunnel 被引量:1
1
作者 M.D.Manshadi K.Ghorbanian M.R.Soltani 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2010年第4期531-539,共9页
In this paper, the effects of turbulence on sound generation and velocity fluctuations due to pressure waves in a large subsonic wind tunnel are studied. A trip strip located at different positions in the contraction ... In this paper, the effects of turbulence on sound generation and velocity fluctuations due to pressure waves in a large subsonic wind tunnel are studied. A trip strip located at different positions in the contraction part or at one position in the diffuser of a large wind tunnel is used to investigate the aforementioned phenomenon, and the results indicate that the trip strip has significant effects on sound reduction. The lowest turbulence intensity and sound are obtained from a trip strip with a diameter of 0.91 mm located either at X/L = 0.79 or at X/L = 0.115 in the wide portion of the contraction. Furthermore, the effect of monopole, dipole and quadrupole sources of aerodynamic noise at different velocities is investigated, and it is demonstrated that the contribution of the monopole is dominant, while the shares due to the dipole and quadrupole remain less important. In addition, it is found that the sound waves have a modest impact on the measured longitudinal turbulence and are generated essentially by eddies. 展开更多
关键词 wind tunnel. Turbulence Sound Quadrupole term - Correlation
下载PDF
A New Sound Alloy for High Grade Wind Instruments
2
作者 L.J.L. 《Rare Metals》 SCIE EI CAS CSCD 1990年第2期156-156,共1页
A new sound alloy, abbreviated to S, has been developed by the General Research Institutefor Non-ferrous Metals, Beijing. The alloy is very suitable for making trumpets, trombones, tenorhorns, saxaphones and other kin... A new sound alloy, abbreviated to S, has been developed by the General Research Institutefor Non-ferrous Metals, Beijing. The alloy is very suitable for making trumpets, trombones, tenorhorns, saxaphones and other kinds of wind instruments. Beijing Wind Instrument Factory, which is the largest one in China, has used Salloy formanufacturing 5200 type trompets, the sound performance of which has been examined with fre-quency analysis and experimented by famous musical experts. The results show that the 5200 typetrumpets made of Salloy have excellent quality, accurate intonation and ease of response at 展开更多
关键词 wind A New Sound Alloy for High Grade wind Instruments
下载PDF
Measuring boundary-layer height under clear and cloudy conditions using three instruments 被引量:2
3
作者 Chenggang Wang Hongrong Shi +2 位作者 Lianji Jin Hongbin Chen Huayang Wen 《Particuology》 SCIE EI CAS CSCD 2016年第5期15-21,共7页
Boundary-layer height (BLH) under clear, altostratus and low stratus cloud conditions were measured by GPS sounding, wind profiler radar, and micro-pulse lidar during the atmospheric radiation measurement experiment... Boundary-layer height (BLH) under clear, altostratus and low stratus cloud conditions were measured by GPS sounding, wind profiler radar, and micro-pulse lidar during the atmospheric radiation measurement experiment from Sep. to Dec. 2008 in Shouxian, Anhui, China. Results showed that during daytime or nighttime, regardless of cloud conditions, the GPS sounding was the most accurate method for measuring BLH. Unfortunately, because of the long time gap between launchings, sounding data did not capture the diurnal evolution of the BLH. Thus, wind profile radar emerged as a promising instrument for direct and continuous measurement of the mixing height during the daytime, accurately determining BLH using the structure parameter of the electromagnetic refractive index. However, during nighttime, radar was limited by weak signal extraction and did not work well for determining the BLH of the stable boundary layer, often recording the BLH of the residual layer. While micro-pulse lidar recorded the evolution of BLH, it overestimated the BLH of the stable boundary layer. This method also failed to work under cloudy conditions because of the influence of water vapor. Future work needs to develop a method to determine BLH that combines the complimentary features of all three algorithms. 展开更多
关键词 Boundary-layer height Atmospheric radiation measurement experiment GPS sounding wind profile radar Micro-pulse lidar
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部