技术性贸易壁垒对我国农产品的出口影响分析——以SPS措施为例

入世23年以来,我国农产品出口规模持续扩大、出口品类日益丰富、出口结构日益完善。SPS措施因其设置和实施的隐蔽性及灵活性,被许多国家用来降低风险和防止其他国家农产品流入本国市场。我国对SPS措施认知尚浅,在农产品的检验检疫标准和品质上与发达国家存在差距,使得我国农产品在全球贸易竞争中处于不利地位。本研究采用2002—2022年我国向主要贸易伙伴国的农产品出口数据,实证评估SPS措施对我国农产品出口的影响。结果表明,虽然SPS措施在短期内会抑制我国农产品出口,但从长远看,SPS措施能倒逼农产品企业提高质量标准,有利于推动我国农产品出口贸易,并且这种正向作用是逐步深化的。基于此,为更好地推动我国农产品出口,政府需建立完善的SPS措施风险警示制度和严密的农产品质量安全规范体系,协助企业开拓新兴市场;行业协会需发挥监督指导作用,参与国际标准制定;农业企业应开展技术创新和品牌建设,获取国际认证。

SPS烧结双主相Sm_(2)Co_(17)-Ce_(2)Co_(17)复合永磁体的微观组织

研究了放电等离子烧结(SPS)工艺和退火温度对双主相Sm_(2)Co_(17)-Ce_(2)Co_(17)复合永磁体微观组织的影响。结果表明:制备双主相Sm_(2)Co_(17)-Ce_(2)Co_(17)复合永磁体的最佳SPS工艺为:烧结温度750℃、压强64 MPa、烧结时间10 min,这样有利于减少稀土元素之间的扩散。退火可使烧结后磁体中存在的非晶相晶化。退火温度越高,双主相磁体中的稀土元素之间越容易相互扩散,Ce原子易扩散到Sm_(2)Co_(17)相中取代Sm原子,而Sm原子扩散到Ce_(2)Co_(17)相中取代Ce原子的机会就相对较少些,且在Sm_(2)Co_(17)相与Ce_(2)Co_(17)相的边界处形成一个过渡的富稀土区。

SPS监管差异对中国果蔬类农产品出口贸易的影响——基于农药最大残留限量标准视角

利用2022年中国对157个国家(地区)出口50种果蔬类农产品贸易数据,采用Heckman两阶段模型,基于农药最大残留限量(MRLs)视角,实证分析SPS监管差异对中国果蔬类农产品出口贸易的影响。结果表明:SPS监管差异抑制中国果蔬类农产品出口的二元边际,即贸易成本效应大于竞争优势效应,贸易成本效应抑制扩展边际和集约边际,而竞争优势效应仅促进集约边际;SPS监管差异对中国向发达国家出口以及对蔬菜农产品出口的抑制作用更大;杀菌剂监管差异对集约边际和扩展边际均具有抑制作用,而杀虫剂监管差异仅抑制集约边际。据此,提出对标国际高标准SPS措施、帮助中小型企业克服技术难关、宣传食品安全理念等政策建议。

利用SMAT和SPS在纯铁表面制备铁镍合金层

利用放电等离子烧结(SPS)技术实现了镍粉在纯铁表面铁镍合金层的制备,通过纯铁表面机械研磨(SMAT)的预处理获得表面纳米层和梯度结构有效促进了铁镍的扩散,提升了合金层厚度和结合强度。通过XRD、SEM、EDS、硬度和摩擦磨损实验等,表征铁镍合金层形貌、组成,测试了力学性能。结果表明:纯铁试样经过SMAT预处理和SPS后,在表面获得了约50μm的铁镍合金层,沿着深度方向镍元素含量梯度变化,而在未经SMAT预处理的纯铁表面仅有25μm的合金层,本方法实现了合金层厚度明显增加。SMAT预处理后的SPS试样硬度提升,表面磨损量和犁沟槽深度减少,结合力增强,耐磨性提升明显。

石榴蔗糖代谢相关酶SPS和INV基因家族鉴定与表达分析

蔗糖磷酸合成酶(SPS)和蔗糖转化酶(INV)是蔗糖代谢的关键调控酶,在植物生长发育过程中起重要作用。本研究利用生物信息学和荧光定量PCR等分子手段,鉴定石榴SPS和INV基因家族成员,分析其理化性质、保守结构域、保守基序、二级结构、亚细胞定位、系统进化关系和表达模式。结果表明,从石榴基因组中鉴定出4个SPS基因和11个INV基因,其编码蛋白均为不稳定蛋白,具有典型的保守结构域,家族成员间特征motif数量和种类大致相同,蛋白结构高度保守;这些蛋白不均匀地分布在染色体上,均定位于叶绿体中,二级结构主要由α-螺旋和无规则卷曲组成。石榴SPS和INV基因家族成员间存在不同程度的亲缘关系,与巨桉同源性较高;不同SPS和INV基因在石榴果实不同发育时期的表达模式存在差异,PgINV3在9月15日(果实增大期)表达水平最高,显著高于其他时期。本研究结果对解析石榴果实中蔗糖代谢的分子机理具有重要意义。

A Review on Sources,Extractions and Analysis Methods of a Sustainable Biomaterial:Tannins

Condensed and hydrolysable tannins are non-toxic natural polyphenols that are a commercial commodity industrialized for tanning hides to obtain leather and for a growing number of other industrial applications mainly to substitute petroleum-based products.They are a definite class of sustainable materials of the forestry industry.They have been in operation for hundreds of years to manufacture leather and now for a growing number of applications in a variety of other industries,such as wood adhesives,metal coating,pharmaceutical/medical applications and several others.This review presents the main sources,either already or potentially commercial of this forestry by-materials,their industrial and laboratory extraction systems,their systems of analysis with their advantages and drawbacks,be these methods so simple to even appear primitive but nonetheless of proven effectiveness,or very modern and instrumental.It constitutes a basic but essential summary of what is necessary to know of these sustainable materials.In doing so,the review highlights some of the main challenges that remain to be addressed to deliver the quality and economics of tannin supply necessary to fulfill the industrial production requirements for some materials-based uses.

Time-lagged Effects of the Spring Atmospheric Heat Source over the Tibetan Plateau on Summer Precipitation in Northeast China during 1961–2020:Role of Soil Moisture

The spring atmospheric heat source(AHS)over the Tibetan Plateau(TP)has been suggested to affect the Asian summer monsoon and summer precipitation over South China.However,its influence on the summer precipitation in Northeast China(NEC)remains unknown.The connection between spring TP AHS and subsequent summer precipitation over NEC from 1961 to 2020 is analyzed in this study.Results illustrate that stronger spring TP AHS can enhance subsequent summer NEC precipitation,and higher soil moisture in the Yellow River Valley-North China region(YRVNC)acts as a bridge.During spring,the strong TP AHS could strengthen the transportation of water vapor to East China and lead to excessive rainfall in the YRVNC.Thus,soil moisture increases,which regulates local thermal conditions by decreasing local surface skin temperature and sensible heat.Owing to the memory of soil moisture,the lower spring sensible heat over the YRVNC can last until mid-summer,decrease the land–sea thermal contrast,and weaken the southerly winds over the East Asia–western Pacific region and convective activities over the South China Sea and tropical western Pacific.This modulates the East Asia–Pacific teleconnection pattern,which leads to a cyclonic anomaly and excessive summer precipitation over NEC.

Quantitative effect of kerogen type on the hydrocarbon generation potential of Paleogene lacustrine source rocks,Liaohe Western Depression,China

Kerogen types exert a decisive effect on the onset and capacity of hydrocarbon generation of source rocks.Lacustrine source rocks in the Liaohe Western Depression are characterized by thick deposition,high total organic carbon(TOC)content,various kerogen types,and a wide range of thermal maturity.Consequently,their hydrocarbon generation potential and resource estimation can be misinterpreted.In this study,geochemical tests,numerical analysis,hydrocarbon generation kinetics,and basin modeling were integrated to investigate the differential effects of kerogen types on the hydrocarbon generation potential of lacustrine source rocks.Optimized hydrocarbon generation and expulsion(HGE)models of different kerogen types were established quantitatively upon abundant Rock-Eval/TOC/vitrinite reflectance(R_(o))datasets.Three sets of good-excellent source rocks deposited in the fourth(Es4),third(Es3),and first(Es1)members of Paleogene Shahejie Formation,are predominantly types I-II_(1),II_(1)-II_(2),and II-III,respectively.The activation energy of types I-II_(2)kerogen is concentrated(180-230 kcal/mol),whereas that of type III kerogen is widely distributed(150-280 kcal/mol).The original hydrocarbon generation potentials of types I,II_(1),II_(2),and III kerogens are 790,510,270,and 85 mg/g TOC,respectively.The Ro values of the hydrocarbon generation threshold for type I-III source rocks gradually increase from 0.42%to 0.74%,and Ro values of the hydrocarbon expulsion threshold increase from 0.49%to 0.87%.Types I and II_(1)source rocks are characterized by earlier hydrocarbon generation,more rapid hydrocarbon expulsion,and narrower hydrocarbon generation windows than types II_(2)and III source rocks.The kerogen types also affect the HGE history and resource potential.Three types(conventional,tight,and shale oil/gas)and three levels(realistic,expected,and prospective)of hydrocarbon resources of different members in the Liaohe Western Depression are evaluated.Findings suggest that the Es3 member has considerable conventional and unconventional hydrocarbon resources.This study can quantitatively characterize the hydrocarbon generation potential of source rocks with different kerogen types,and facilitate a quick and accurate assessment of hydrocarbon resources,providing strategies for future oil and gas exploration.

The coupling control of biological precursors and environmental factors onβ-carotane enrichment in alkaline lacustrine source rocks:A case study from the Fengcheng formation in the western Junggar Basin,NW China

The organic-rich mudstones and dolostones of the Permian Fengcheng Formation(Fm.)are typically alkaline lacustrine source rocks,which are typified by impressively abundantβ-carotane.Abundant β-carotane has been well acknowledged as an effective indicator of biological sources or depositional environments.However,the specific biological sources of β-carotane and the coupling control of biological sources and environmental factors on the enrichment of β-carotane in the Fengcheng Fm.remains obscure.Based on a comprehensive investigation of the bulk,molecular geochemistry,and organic petrology of sedimentary rocks and the biochemistry of phytoplankton in modern alkaline lakes,we proposed a new understanding of the biological precursors of β-carotane and elucidated the enrichment mechanism of β-carotane in the Fengcheng Fm.The results show that the biological precursors crucially control the enrichment of β-carotane in the Fengcheng Fm.The haloalkaliphilic cyanobacteria are the primary biological sources of β-carotane,which is suggested by a good positive correlation between the 2-methylhopane index,7-+8-methyl heptadecanes/C_(max),C_(29%),and β-carotane/C_(max)in sedimentary rocks and the predominance of cyanobacteria with abundantβ-carotene in modern alkaline lakes.The enrichment of β-carotane requires the reducing condition,and the paleoredox state that affects the enrichment of β-carotane appears to have a threshold.The paleoclimate conditions do not considerably impact the enrichment of β-carotane,but they have some influence on the water's paleosalinity by affecting evaporation and precipitation.While it does not directly affect the enrichment of β-carotane in the Fengcheng Fm.,paleosalinity does have an impact on the cyanobacterial precursor supply and the preservation conditions.

Interdecadal variability of summer precipitation in the Three River Source Region: Influences of SST and zonal shifts of the East Asian subtropical westerly jet

Summer precipitation in the Three Rivers Source Region(TRSR)of China is vital for the headwaters of the Yellow,Yangtze,and Lancang rivers and exhibits significant interdecadal variability.This study investigates the influence of the East Asian westerly jet(EAWJ)on TRSR rainfall.A strong correlation is found between TRSR summer precipitation and the Jet Zonal Position Index(JZPI)of the EAWJ from 1961 to 2019(R=0.619,p<0.01).During periods when a positive JZPI indicates a westward shift in the EAWJ,enhanced water vapor anomalies,warmer air,and low-level convergence anomalies contribute to increased TRSR summer precipitation.Using empirical orthogonal function and regression analyses,this research identifies the influence of large-scale circulation anomalies associated with the Atlantic–Eurasian teleconnection(AEA)from the North Atlantic(NA).The interdecadal variability between the NA and central tropical Pacific(CTP)significantly affects TRSR precipitation.This influence is mediated through the AEA via a Rossby wave train extending eastward along the EAWJ,and another south of 45°N.Moreover,the NA–CTP Opposite Phase Index(OPI),which quantifies the difference between the summer mean sea surface temperatures of the NA and the CTP,is identified as a critical factor in modulating the strength of this teleconnection and influencing the zonal position of the EAWJ.

烧结温度对SPS制备Ti_(2)AlNb组织与拉伸性能的影响

采用高能球磨和放电等离子烧结技术制备了Ti_(2)AlNb合金,利用SEM、EDS和XRD对合金显微组织及物相结构进行表征,利用万能拉伸试验机测试合金室温抗拉强度,并观察其断口形貌,以此分析不同烧结温度对Ti_(2)AlNb合金组织及拉伸性能的影响。结果表明,不同烧结温度下Ti_(2)AlNb合金均由O相、B2相及α_(2)相组成;O相形态随烧结温度变化而发生改变,在950℃烧结时,O相呈Rim-O相形态,1 000℃烧结时呈针状O相,1 050℃与1 100℃烧结时呈板条状O相。在烧结温度1 000℃、保温时间90 min以及压强50 MPa的条件下,Ti_(2)AlNb合金的室温抗拉强度可达198 MPa,室温拉伸后的断裂类型是以解理断裂为主的脆性断裂。

6SPS型并联机床铣削参数优化

针对并联机床在不同位姿下因刚度、振动响应等因素造成的铣削过程不稳定问题,以6SPS型并联机床为研究对象,通过分析铣削参数,提出一种变进给速度优化方法。采用各推杆的总伸长量及标准偏差对位姿进行描述,将进给速度转化为进给倍率,建立进给倍率关于推杆总伸长量及标准偏差的数学模型,并采用不同的铣削路径、参数、刀具,分别进行两组实验方案下的恒进给与变进给速度的铣削实验。实验结果表明:实验方案一、二中恒进给铣削振动均方根变化范围比变进给铣削分别扩大179倍、8.5倍;实验方案一恒进给铣削表面质量差异明显,而变进铣削表面质量比较稳定。所提变进给速度优化方法有效提高了并联机床的铣削稳定性。

Localization for mixed near-field and far-field sources under impulsive noise

In order to solve the problem that the performance of traditional localization methods for mixed near-field sources(NFSs)and far-field sources(FFSs)degrades under impulsive noise,a robust and novel localization method is proposed.After eliminating the impacts of impulsive noise by the weighted out-lier filter,the direction of arrivals(DOAs)of FFSs can be estimated by multiple signal classification(MUSIC)spectral peaks search.Based on the DOAs information of FFSs,the separation of mixed sources can be performed.Finally,the estimation of localizing parameters of NFSs can avoid two-dimension spectral peaks search by decomposing steering vectors.The Cramer-Rao bounds(CRB)for the unbiased estimations of DOA and range under impulsive noise have been drawn.Simulation experiments verify that the proposed method has advantages in probability of successful estimation(PSE)and root mean square error(RMSE)compared with existing localization methods.It can be concluded that the proposed method is effective and reliable in the environment with low generalized signal to noise ratio(GSNR),few snapshots,and strong impulse.

SPS措施对我国中药产品出口持续时间的影响

SPS措施逐渐成为阻碍中国中药产品出口的重要障碍,如何在SPS时代保证出口的持续性是该产业面临的重要问题。该研究利用2002—2020年中国中药产品出口贸易数据,运用K-M生存分析法探明中药产品出口持续时间的分布特征,构建离散时间模型分析SPS措施对中药产品出口持续时间的影响。结果表明:我国中药产品出口持续时间普遍较短,中位数为2年,且出口持续时间存在负时间依存性,存在“门槛效应”。贸易伙伴提出的SPS通报将显著增加中药产品出口贸易的失败风险率,已出口贸易段对风险率具有负效应。最后就延长我国中药产品出口贸易持续时间提出相应的对策建议。

Experimental results of a magnetic field modification to the radio frequency driver of a negative ion source

A magnetic field produced by a current flowing through the plasma grid(PG) is one of the solutions to reduce the collisional loss of negative ions in a negative ion source, which reduces the electron temperature in front of the PG. However, the magnetic field diffused into the driver has some influence on the plasma outflowing. In order to investigate the effect of changing this magnetic field on the outflowing of plasma from the driver, a circular ring(absorber) of high permeability iron has been introduced at the driver exit, which can reduce the magnetic field around it and improve plasma outflowing. With the application of the absorber, the electron density is increased by about 35%, and the extraction current measured from the extraction grid is increased from 1.02 A to 1.29 A. The results of the extraction experiment with cesium injection show that both the extraction grid(EG) current and H-current are increased when the absorber is introduced.

Five-view three-dimensional reconstructionfor ultrafast dynamic imaging of pulsedradiation sources

Multiaxial neutron/x-ray imaging and three-dimensional (3D) reconstruction techniques play a crucial role in gaining valuable insights intothe generation and evolution mechanisms of pulsed radiation sources. Owing to the short emission time (∼200 ns) and drastic changes of thepulsed radiation source, it is necessary to acquire projection data within a few nanoseconds in order to achieve clear computed tomography3D imaging. As a consequence, projection data that can be used for computed tomography image reconstruction at a certain moment are oftenavailable for only a few angles. Traditional algorithms employed in the process of reconstructing 3D images with extremely incomplete datamay introduce significant distortions and artifacts into the final image. In this paper, we propose an iterative image reconstruction methodusing cylindrical harmonic decomposition and a self-supervised denoising network algorithm based on the deep image prior method. Weaugment the prior information with a 2D total variation prior and a 3D deep image prior. Single-wire Z-pinch imaging experiments have beencarried out at Qin-1 facility in five views and four frames, with a time resolution of 3 ns for each frame and a time interval of 40 ns betweenadjacent frames. Both numerical simulations and experiments verify that our proposed algorithm can achieve high-quality reconstructionresults and obtain the 3D intensity distribution and evolution of extreme ultraviolet and soft x-ray emission from plasma.

Applying Source Parameter Imaging (SPI) to Aeromagnetic Data to Estimate Depth to Magnetic Sources in the Mamfe Sedimentary Basin

Aeromagnetic data over the Mamfe Basin have been processed. A regional magnetic gridded dataset was obtained from the Total Magnetic Intensity (TMI) data grid using a 3 × 3 convolution (Hanning) filter to remove regional trends. Major similarities in magnetic field orientation and intensities were observed at identical locations on both the regional and TMI data grids. From the regional and TMI gridded datasets, the residual dataset was generated which represents the very shallow geological features of the basin. Processing this residual data grid using the Source Parameter Imaging (SPI) for magnetic depth suggests that the estimated depths to magnetic sources in the basin range from about 271 m to 3552 m. The highest depths are located in two main locations somewhere around the central portion of the study area which correspond to the area with positive magnetic susceptibilities, as well as the areas extending outwards across the eastern boundary of the study area. Shallow magnetic depths are prominent towards the NW portion of the basin and also correspond to areas of negative magnetic susceptibilities. The basin generally exhibits a variation in depth of magnetic sources with high, average and shallow depths. The presence of intrusive igneous rocks was also observed in this basin. This characteristic is a pointer to the existence of geologic resources of interest for exploration in the basin.

GLOBAL WEAK SOLUTIONS FOR AN ATTRACTION-REPULSION CHEMOTAXIS SYSTEM WITH p-LAPLACIAN DIFFUSION AND LOGISTIC SOURCE

This paper is concerned with the following attraction-repulsion chemotaxis system with p-Laplacian diffusion and logistic source:■The system here is under a homogenous Neumann boundary condition in a bounded domainΩ ■ R^(n)(n≥2),with χ,ξ,α,β,γ,δ,k_(1),k_(2)> 0,p> 2.In addition,the function f is smooth and satisfies that f(s)≤κ-μs~l for all s≥0,with κ ∈ R,μ> 0,l> 1.It is shown that(ⅰ)if l> max{2k_(1),(2k_(1)n)/(2+n)+1/(p-1)},then system possesses a global bounded weak solution and(ⅱ)if k_(2)> max{2k_(1)-1,(2k_(1)n)/(2+n)+(2-p)/(p-1)} with l> 2,then system possesses a global bounded weak solution.

Enhancing microseismic/acoustic emission source localization accuracy with an outlier-robust kernel density estimation approach

Monitoring sensors in complex engineering environments often record abnormal data,leading to significant positioning errors.To reduce the influence of abnormal arrival times,we introduce an innovative,outlier-robust localization method that integrates kernel density estimation(KDE)with damping linear correction to enhance the precision of microseismic/acoustic emission(MS/AE)source positioning.Our approach systematically addresses abnormal arrival times through a three-step process:initial location by 4-arrival combinations,elimination of outliers based on three-dimensional KDE,and refinement using a linear correction with an adaptive damping factor.We validate our method through lead-breaking experiments,demonstrating over a 23%improvement in positioning accuracy with a maximum error of 9.12 mm(relative error of 15.80%)—outperforming 4 existing methods.Simulations under various system errors,outlier scales,and ratios substantiate our method’s superior performance.Field blasting experiments also confirm the practical applicability,with an average positioning error of 11.71 m(relative error of 7.59%),compared to 23.56,66.09,16.95,and 28.52 m for other methods.This research is significant as it enhances the robustness of MS/AE source localization when confronted with data anomalies.It also provides a practical solution for real-world engineering and safety monitoring applications.

Source localization in signed networks with effective distance

While progress has been made in information source localization,it has overlooked the prevalent friend and adversarial relationships in social networks.This paper addresses this gap by focusing on source localization in signed network models.Leveraging the topological characteristics of signed networks and transforming the propagation probability into effective distance,we propose an optimization method for observer selection.Additionally,by using the reverse propagation algorithm we present a method for information source localization in signed networks.Extensive experimental results demonstrate that a higher proportion of positive edges within signed networks contributes to more favorable source localization,and the higher the ratio of propagation rates between positive and negative edges,the more accurate the source localization becomes.Interestingly,this aligns with our observation that,in reality,the number of friends tends to be greater than the number of adversaries,and the likelihood of information propagation among friends is often higher than among adversaries.In addition,the source located at the periphery of the network is not easy to identify.Furthermore,our proposed observer selection method based on effective distance achieves higher operational efficiency and exhibits higher accuracy in information source localization,compared with three strategies for observer selection based on the classical full-order neighbor coverage.