GLOBAL WEAK SOLUTIONS FOR AN ATTRACTION-REPULSION CHEMOTAXIS SYSTEM WITH p-LAPLACIAN DIFFUSION AND LOGISTIC SOURCE

This paper is concerned with the following attraction-repulsion chemotaxis system with p-Laplacian diffusion and logistic source:■The system here is under a homogenous Neumann boundary condition in a bounded domainΩ ■ R^(n)(n≥2),with χ,ξ,α,β,γ,δ,k_(1),k_(2)> 0,p> 2.In addition,the function f is smooth and satisfies that f(s)≤κ-μs~l for all s≥0,with κ ∈ R,μ> 0,l> 1.It is shown that(ⅰ)if l> max{2k_(1),(2k_(1)n)/(2+n)+1/(p-1)},then system possesses a global bounded weak solution and(ⅱ)if k_(2)> max{2k_(1)-1,(2k_(1)n)/(2+n)+(2-p)/(p-1)} with l> 2,then system possesses a global bounded weak solution.

Two Monte Carlo-based simulators for imaging-system modeling and projection simulation of flat-panel X-ray source

The advantages of a flat-panel X-ray source(FPXS)make it a promising candidate for imaging applications.Accurate imaging-system modeling and projection simulation are critical for analyzing imaging performance and resolving overlapping projection issues in FPXS.The conventional analytical ray-tracing approach is limited by the number of patterns and is not applicable to FPXS-projection calculations.However,the computation time of Monte Carlo(MC)simulation is independent of the size of the patterned arrays in FPXS.This study proposes two high-efficiency MC projection simulators for FPXS:a graphics processing unit(GPU)-based phase-space sampling MC(gPSMC)simulator and GPU-based fluence sampling MC(gFSMC)simulator.The two simulators comprise three components:imaging-system modeling,photon initialization,and physical-interaction simulations in the phantom.Imaging-system modeling was performed by modeling the FPXS,imaging geometry,and detector.The gPSMC simulator samples the initial photons from the phase space,whereas the gFSMC simulator performs photon initialization from the calculated energy spectrum and fluence map.The entire process of photon interaction with the geometry and arrival at the detector was simulated in parallel using multiple GPU kernels,and projections based on the two simulators were calculated.The accuracies of the two simulators were evaluated by comparing them with the conventional analytical ray-tracing approach and acquired projections,and the efficiencies were evaluated by comparing the computation time.The results of simulated and realistic experiments illustrate the accuracy and efficiency of the proposed gPSMC and gFSMC simulators in the projection calculation of various phantoms.

Low-power system model for quantum entangled photon-pair source

The quantum entangled photon-pair source,as an essential component of optical quantum systems,holds great potential for applications such as quantum teleportation,quan-tum computing,and quantum imaging.The current workhorse technique for preparing photon pairs involves performing spon-taneous parametric down conversion(SPDC)in bulk nonlinear crystals.However,the current power consumption and cost of preparing entangled photon-pair sources are relatively high,pos-ing challenges to their integration and scalability.In this paper,we propose a low-power system model for the quantum entan-gled photon-pair source based on SPDC theory and phase matching technology.This model allows us to analyze the per-formance of each module and the influence of component cha-racteristics on the overall system.In our experimental setup,we utilize a 5 mW laser diode and a typical type-II barium metabo-rate(BBO)crystal to prepare an entangled photon-pair source.The experimental results are in excellent agreement with the model,indicating a significant step towards achieving the goal of low-power and low-cost entangled photon-pair sources.This achievement not only contributes to the practical application of quantum entanglement lighting,but also paves the way for the widespread adoption of optical quantum systems in the future.

New food sources and production systems:a comparison of international regulations and China’s advancements in novel foods with synthetic biology

The global shift towards sustainable food systems has sparked innovations in food sources and production systems,including cell-based meat,plant-based food products,precision fermentation,and 3D food printing.These advancements pose regulatory challenges and opportunities,with China emerging as a critical player in adopting and regulating new food technologies.This review explores the international landscape of new food sources and production systems(NFPS),focusing on China’s role and regulatory approaches compared to global practices.Through this comparative analysis,we aim to contribute to the ongoing dialogue on food safety regulation,offering insights and recommendations for policymakers,industry stakeholders,and researchers engaged in the global food system’s evolution.This comprehensive overview underscores the dynamic nature of regulatory frameworks governing NFPS,highlighting the international efforts to ensure food safety,consumer protection,and the sustainable evolution of the food industry.

Experimental Study on the Performance of ORC System Based on Ultra-Low Temperature Heat Sources

This paper discussed the experimental results of the performance of an organic Rankine cycle(ORC)system with an ultra-low temperature heat source.The low boiling point working medium R134a was adopted in the system.The simulated heat source temperature(SHST)in this work was set from 39.51°C to 48.60°C by the simulated heat source module.The influence of load percentage of simulated heat source(LPSHS)between 50%and 70%,the rotary valve opening(RVO)between 20%and 100%,the resistive load between 36Ωand 180Ωor the no-load of the generator,as well as the autumn and winter ambient temperature on the system performance were studied.The results showed that the stability of the system was promoted when the generator had a resistive load.The power generation(PG)and generator speed(GS)of the system in autumn were better than in winter,but the expander pressure ratio(EPR)was lower than in winter.Keep RVO unchanged,the SHST,the mass flow rate(MFR)of the working medium,GS,and the PG of the system increased with the increasing of LPSHS for different generator resistance load values.When the RVO was 60%,LPSHS was 70%,the SHST was 44.15°C and the resistive load was 72Ω,the highest PG reached 15.11 W.Finally,a simulation formula was obtained for LPSHS,resistance load,and PG,and its correlation coefficient was between 0.9818 and 0.9901.The formula can accurately predict the PG.The experimental results showed that the standard deviation between the experimental and simulated values was below 0.0792,and the relative error was within±5%.

Web service based spatial forest information system using an open source software approach

For technical and other reasons there is a dilemma that data providers cannot find an appropriate way to redistribute spatial forest data and data users who need spatial data cannot access and integrate available forest resources information. To overcome this dilemma, this paper proposed a spatial forest information system based on Web service using an open source software approach. With Web service based architecture, the system can enable interoperability, integrate Web services from other application servers, reuse codes, and shorten the development time and cost. At the same time, it is possible to extend the local system to a regional or national spatial forest information system. The growth of Open Source Software （OSS） provides an alternative choice to proprietary software for operating systems, web servers, Web-based GIS applications and database management systems. Using open source software to develop spatial forest information systems can greatly reduce the cost while providing high performance and sharing spatial forest information. We chose open source software to build a prototype system for Xixia County, Henan Province, China. By integrating OSS packages Deegree and UMN MapServer which are compliant to the OGC open specifications, the prototype system enables users to access spatial forest information and travelling information of Xixia County which come from two different data servers via a standard Web browser and promotes spatial forest information sharing.

Alternate operation characteristics of a solar-ground source heat pump system

In order to investigate the alternate operation characteristics of a solar-ground source heat pump system（SGSHPS）,various alternate operation modes are put forward and defined.A two-dimensional mathematical model with freezing/melting phase changes is developed for the heat transfer analysis of the soil.Based on the numerical solution of the model,the variation trends of underground soil temperature of the SGSHPS operated in various alternate operation modes are discussed.The results indicate that,for the day-night and short-time interval alternate operation modes without solar energy,the operation time fraction of a solar heat source should be confined to from 50% to 58% when operated in an alternate period of 24 h.Meanwhile,the disadvantages of a natural resumption of soil temperature can be overcome effectively by solar energy filling,and an optimal operation effect can be achieved by integrating the mode of solar energy filling with other alternate modes.In addition,the accuracy of the presented model is verified by the experimental data of borehole wall temperatures.The conclusions can provide a reference for the optimization operation of the SGSHPS.

Metabolic Characteristics and Functional Diversity of Carbon Source in Microflora of Ponds with Recirculating Aquaculture System

With Biolog Eco microplate, metabolic characteristics and functional diver-sity of carbon source in microflora of ponds were researched based on recitculating ponds and control ponds in order to explore effects of eco-adjustments on microflo-ra in ponds. The results indicate that total number of bacterium, microbial metabolism activity, and diversity index in P7, P8, P1 and P2 kept higher, fol owed by P3, P4, P5 and P6. The utilization rate of microbes on sugars achieved the highest （31.0%-48.7%）, fol owed by carboxylic acid （13.4%-18.0%）, amino acid （10.1%-20.5%）, polymers （9.4%-17.0%）, biopolymer （5.7%-9.7%） and phenol （4.95%-7.50%）. Principal component analysis divided microflora in different ponds, suggesting that microbial community has varied carbon source characteristics and nitrogen-containing compound and biopolymer metabolisms are most affected.

Determination of pollution point source in parabolic system model

This paper considers an inverse problem for a partial differential equation to identify a pollution point source in a watershed. The mathematical model of the problem is a weakly coupled system of two linear parabolic equations for the concentrations u（x, t） and v（x, t） with an unknown point source F（x, t） = A（ t）δ（x- s） related to the concentration u（x, t）, where s is the point source location and A（t） is the amplitude of the pollution point source. Assuming that source F becomes inactive after time T＊, it is proved that it can be uniquely determined by the indirect measurements { v（0, t）, v（ a, t）, v（ b, t）, v（ l, t）, 0 〈 t ≤ T, T＊ 〈 T}, and, thus, the local Lipschitz stability for this inverse source problem is obtained. Based on the proof of its uniqueness, an inversion scheme is presented to determine the point source. Finally, two numerical examples are given to show the feasibility of the inversion scheme.

Controlling Non-Point Source Pollution in Australian Agricultural Systems

The Australian farming sector is continuing to intensify, particularly within 300 km of the east and southern coastlines. In the future there will be fewer and larger farms, which will use more fertilizer, support more stock, grow more monoculture crops, and utilise more marginal soils. This is likely to increase the major environmental impacts of soil degradation, salt, nutrient and sediment contamination of waterways, and greenhouse gas emissions. Australian national water policy continues to focus on land, stream and groundwater salinity issues, although there is now a greater recognition of the importance of nitrogen and phosphorus losses from agriculture. The general philosophy of policy for dealing with non- point source pollution has been towards a voluntary rather than regulatory approach, with state and national governments supporting a range of programs to encourage sustainable agricultural practices. A catchment (watershed) based approach, through the use of integrated catchment management plans, is the primary way that non-point source pollution is addressed at the farm and local level. At an industry level, cotton, grains, meat, sugarcane and dairy amongst others, as well as the Australian fertilizer industry, have responded to non-point source issues by investing in research and development, and developing codes of practice aimed at abating these environmental impacts. Understanding the economic, social, political and cultural contexts of farming as well as the environmental impacts of agriculture are very important in determining the appropriateness of policy responses for Australian farming systems.

Spatial patterns of ecosystem vulnerability changes during 2001–2011 in the three-river source region of the Qinghai-Tibetan Plateau, China

The three-river source region (TRSR, including Yangtze, Yellow and Lancang rivers), located in the Qinghai-Tibetan Plateau, China, is a typical alpine zone with apparent ecosystem vulnerability and sensitivity. In this paper, we introduced many interdisciplinary factors, such as landscape pattern indices (Shannon diversity index and Shannon evenness index) and extreme climate factors (number of extreme high temperature days, number of extreme low temperature days, and number of extreme precipitation days), to establish a new model for evaluating the spatial patterns of ecosystem vulnerability changes in the TRSR. The change intensity (CI) of ecosystem vulnerability was also analyzed. The results showed that the established evaluation model was effective and the ecosystem vulnerability in the whole study area was intensive. During the study period of 2001–2011, there was a slight degradation in the eco-environmental quality. The Yellow River source region had the best eco-environmental quality, while the Yangtze River source region had the worst one. In addition, the zones dominated by deserts were the most severely deteriorated areas and the eco-environmental quality of the zones occupied by evergreen coniferous forests showed a better change. Furthermore, the larger the change rates of the climate factors (accumulative temperature of ≥10°C and annual average precipitation) are, the more intensive the CI of ecosystem vulnerability is. This study would provide a scientific basis for the eco-environmental protection and restoration in the TRSR.

Hydrogeochemical Characteristics and Groundwater Inrush Source Identification for a Multi-aquifer System in a Coal Mine

Correct identification of water inrush sources is particularly important to prevent and control mine water disasters.Hydrochemical analysis,Fisher discriminant analysis,and geothermal verification analysis were used to identify and verify the water sources of the multi-aquifer groundwater system in Gubei coal mine,Anhui Province,North China.Results show that hydrochemical water types of the Cenozoic top aquifer included HCO3-Na+K-Ca,HCO3-Na+K-Mg and HCO3-Na+K,and this aquifer was easily distinguishable from other aquifers because of its low concentration of Na++K+and Cl-.The Cenozoic middle and bottom aquifers,the Permian fissure aquifer,and the Taiyuan and Ordovician limestone aquifers were mainly characterized by the Cl-Na+K and SO4-Cl-Na+K or HCO3-Cl-Na+K water types,and their hydrogeochemistries were similar.Therefore,water sources could not be identified via hydrochemical analysis.Fisher model was established based on the hydrogeochemical characteristics,and its discrimination rate was 89.19%.Fisher discrimination results were improved by combining them with the geothermal analysis results,and this combination increased the identification rate to 97.3%and reasonably explained the reasons behind two water samples misjudgments.The methods described herein are also applicable to other mines with similar geological and hydrogeological conditions in North China.

River-gulf system--the major location of marine source rock formation

Petroleum was generated from sedimentary rocks. The world＇s oldest oil source rock so far was found in Proterozoic rocks. Since then, 73% to 81% of the earth＇s surface has been covered with sedimentary rocks. However, only quite a limited area is rich in oil and gas. It is found that source rocks have controlled oil and gas distribution, and they are mainly formed in two systems： （1） river-lake systems and （2） river-gulf systems. Phytoplankton is an important source of kerogen, the blooming of which is strongly dependent on nutrients. Rivers are the major nutrient provider for basins. Rivers around lakes and an undercompensation （where the sedimentation rate is less than the rate of basin subsidence） environment provide favorable conditions for phytoplankton blooming in lakes. Gulfs are usually located at the estuary of big rivers, characterized by restricted current circulation and exchange with the open sea, which benefit maintaining the nutrient density, phytoplankton levels and organic matter preservation. The river-gulf system is the most favorable place for marine source rock development. Most of the world famous marine petroleum-rich provinces are developed from river-gulf systems in geological history, such as the Persian Gulf Basin, Siberian Basin, Caspian Basin, North Sea, Sirte Basin, Nigerian Basin, Kwanza Basin, Gulf of Mexico, Maracaibo Basin and the Eastern Venezuelan Basin.

BOUNDEDNESS OF THE HIGHER-DIMENSIONAL QUASILINEAR CHEMOTAXIS SYSTEM WITH GENERALIZED LOGISTIC SOURCE

This article considers the following higher-dimensional quasilinear parabolic-parabolic-ODE chemotaxis system with generalized Logistic source and homogeneous Neumann boundary conditions{ut=∇⋅(D(u)∇u)−∇⋅(S(u)∇v)+f(u),x∈Ω,t>0 vt=Δv+w−v,x∈Ω,t>0,wt=u−w,x∈Ω,t>0,in a bounded domainΩ⊂R^n(n≥2)with smooth boundary ∂Ω,where the diffusion coefficient D(u)and the chemotactic sensitivity function S(u)are supposed to satisfy D(u)≥M1(u+1)^−αand S(u)≤M2(u+1)^β,respectively,where M1,M2>0 and α,β∈R.Moreover,the logistic source f(u)is supposed to satisfy f(u)≤a−μu^γ with μ>0,γ≥1,and a≥0.Asα+2β<γ−1+2γ/n,we show that the solution of the above chemotaxis system with sufficiently smooth nonnegative initial data is uniformly bounded.

Ecosystem carbon storage and sink/source of temperate forested wetlands in Xiaoxing’anling, northeast China

Wetlands play an important role in the global carbon cycle, but there are still considerable uncertainties in the estimation of wetland carbon storage and a dispute on whether wetlands are carbon sources or carbon sinks. Xiaoxing’anling are one of several concentrated distribution areas of forested wetland in China, but the carbon storage and carbon sink/source of forested wetlands in this area is unclear. We measured the ecosystem carbon storage (vegetation and soil), annual net carbon sequestration of vegetation and annual carbon emissions of soil heterotrophic respiration of five typical forested wetland types (alder swamp, white birch swamp, larch swamp, larch fen, and larch bog) distributed along a moisture gradient in this area in order to reveal the spatial variations of their carbon storage and quantitatively evaluate their position as carbon sink or source according to the net carbon balance of the ecosystems. The results show that the larch fen had high carbon storage (448.8 t ha^(−1)) (6.8% higher than the larch bog and 10.5–30.1% significantly higher than other three wetlands (P < 0.05), the white birch swamp and larch bog were medium carbon storage ecosystems (406.3 and 420.1 t ha^(−1)) (12.4–21.8% significantly higher than the other two types (P < 0.0 5), while the alder swamp and larch swamp were low in carbon storage (345.0 and 361.5 t ha^(−1), respectively). The carbon pools of the five wetlands were dominated by their soil carbon pools (88.5–94.5%), and the vegetation carbon pool was secondary (5.5–11.5%). At the same time, their ecosystem net carbon balances were positive (0.1–0.6 t ha^(−1) a^(−1)) because the annual net carbon sequestration of vegetation (4.0–4.5 t ha^(−1) a^(−1)) were higher than the annual carbon emissions of soil heterotrophic respiration (CO_(2) and CH_(4)) (3.8–4.4 t ha^(−1) a^(−1)) in four wetlands, (the alder swamp being the exception), so all four were carbon sinks while only the alder swamp was a source of carbon emissions (− 2.1 t ha^(−1) a^(−1)) due to a degraded tree layer. Our results demonstrate that these forested wetlands were generally carbon sinks in the Xiaoxing’anling, and there was obvious spatial variation in carbon storage of ecosystems along the moisture gradient.

Catalog of Enhanced Geothermal Systems based on Heat Sources

It is common sense that a deeper well implies higher temperature in the exploration of deep geothermal resources, especially with hot dry rock(HDR) geothermal resources, which are generally exploited in terms of enhanced geothermal systems(EGS). However, temperature is always different even at the same depth in the upper crust due to different heat sources. This paper summarizes the heat sources and classifies them into two types and five sub-types: crustorigin(partial melting, non-magma-generated tectonic events and radiogenic heat production), and mantle-origin(magma and heat conducted from the mantle). A review of global EGS sites is presented related to the five sub-types of heat sources. According to our new catalog, 71% of EGS sites host mantle-origin heat sources. The temperature logging curves indicate that EGS sites which host mantle-origin magma heat sources have the highest temperature. Therefore, high heat flow(>100 m W/m^(2)) regions with mantle-origin magma heat sources should be highlighted for the future exploration of EGS. The principle to identify the heat source is elucidated by applying geophysical and geochemical methods including noble gas isotope geochemistry and lithospheric thermal structure analysis. This analytical work will be helpful for the future exploration and assessment of HDR geothermal resources.

Neutronics analysis of a stacked structure for a subcritical system with LEU solution driven by a D-T neutron source for~(99)Mo production

The utilization of neutrons markedly affects the medical isotope yield of a subcritical system driven by an external D-T neutron source.The general methods to improve the utilization of neutrons include moderating multiplying,and reflecting neutrons,which ignores the use of neutrons that backscatter to the source direction.In this study,a stacked structure was formed by assembling the multiplier and the low-enriched uranium solution to enable the full use of neutrons that backscatter to the source direction and further improve the utilization of neutrons.A model based on SuperMC was used to evaluate the neutronics and safety behavior of the subcritical system,such as the neutron effective multiplication factor,neutron energy spectrum,medical isotope yield,and heat deposition.Based on the calculation results,when the intensity of the neutron source was 59×10^(13)n/s,the optimized design with a stacked structure could increase the yield of ^(99)Mo to182 Ci/day,which is approximately 16% higher than that obtained with a single-layer structure.The inlet H_(2)O coolant velocity of 1.0 m/s and initial temperature of 20℃ were also found to be sufficient to prevent boiling of the fuel solution.

Reassessment of the Distribution of Mantle CO_(2) in the Bohai Sea,China:The Perspective from the Source and Pathway System

Research on the distribution of mantle CO_(2)should involve comprehensive analysis from CO_(2)source to accumulation.The crust-mantle pathway system is the key controlling factor of the distribution of mantle CO_(2),but has received little attention.The pathway system and controlling factors of CO_(2)distribution in the Bohai Sea are analyzed using data on fault styles and information on the mantle and lithosphere.The relation between volcanic rocks and the distribution of mantle CO_(2)is reassessed using age data for CO_(2)accumulations.The distribution of mantle CO_(2)is controlled by uplift of the asthenosphere and upper mantle,magma conduits in the mantle and fault systems in the crust.Uplifted regions of the asthenosphere are accumulation areas for CO_(2).The area with uplift of the Moho exhibits accumulation of mantle CO_(2)at depth.CO_(2)was mainly derived from vertical migration through the upper mantle and lower crust.The fault style in the upper crust controls the distance of horizontal migration and the locations of CO_(2)concentrations.The distribution of mantle CO_(2)and volcanic rocks are not the same,but both probably followed the same pathways sometimes.Mantle CO_(2)in the Bohai Sea is concentrated in the Bozhong sag and the surrounding area,particularly in a trap that formed before 5.1 Ma and is connected to crustal faults(the Bozhang faults)and lithospheric faults(the Tanlu faults).

A Fusion Neutron Source Driven Sub-Critical Nuclear Energy System: A Way for Early Application of Fusion Technology

This paper proposes a sub-critical nuclear energy system driven by fusion neutron source, FDS, which can be used to transmute long-lived radioactive wastes and to produce fissile nuclear fuel as a way for early application of fusion technology. The necessity and feasibility to develop that system in China are illustrated on the basis of prediction of the demand of energy source in the first half of the 21th century, the status of current fission energy supply and the progress in fusion technology in the world. The characteristics of fusion neutron driver and the potential for transmutation of long-lived nuclear wastes and breeding of fissile nuclear fuel in a blanket are analyzed. A scenario of development steps is proposed.

The development of data acquisition and processing application system for RF ion source

As the key ion source component of nuclear fusion auxiliary heating devices, the radio frequency （RF） ion source is developed and applied gradually to offer a source plasma with the advantages of ease of control and high reliability. In addition, it easily achieves long-pulse steady-state operation. During the process of the development and testing of the RF ion source, a lot of original experimental data will be generated. Therefore, it is necessary to develop a stable and reliable computer data acquisition and processing application system for realizing the functions of data acquisition, storage, access, and real-time monitoring. In this paper, the development of a data acquisition and processing application system for the RF ion source is presented. The hardware platform is based on the PXI system and the software is programmed on the LabVIEW development environment. The key technologies that are used for the implementation of this software programming mainly include the long-pulse data acquisition technology, multi- threading processing technology, transmission control communication protocol, and the Lempel-Ziv-Oberhumer data compression algorithm. Now, this design has been tested and applied on the RF ion source. The test results show that it can work reliably and steadily. With the help of this design, the stable plasma discharge data of the RF ion source are collected, stored, accessed, and monitored in real-time. It is shown that it has a very practical application significance for the RF experiments.