Taking the Lower Cretaceous Qingshuihe Formation in the southern margin of Junggar Basin as an example,the influences of the burial process in a foreland basin on the diagenesis and the development of high-quality res...Taking the Lower Cretaceous Qingshuihe Formation in the southern margin of Junggar Basin as an example,the influences of the burial process in a foreland basin on the diagenesis and the development of high-quality reservoirs of deep and ultra-deep clastic rocks were investigated using thin section,scanning electron microscope,electron probe,stable isotopic composition and fluid inclusion data.The Qingshuihe Formation went through four burial stages of slow shallow burial,tectonic uplift,progressive deep burial and rapid deep burial successively.The stages of slow shallow burial and tectonic uplift not only can alleviate the mechanical compaction of grains,but also can maintain an open diagenetic system in the reservoirs for a long time,which promotes the dissolution of soluble components by meteoric freshwater and inhibits the precipitation of dissolution products in the reservoirs.The late rapid deep burial process contributed to the development of fluid overpressure,which effectively inhibits the destruction of primary pores by compaction and cementation.The fluid overpressure promotes the development of microfractures in the reservoir,which enhances the dissolution effect of organic acids.Based on the quantitative reconstruction of porosity evolution history,it is found that the long-term slow shallow burial and tectonic uplift processes make the greatest contribution to the development of deep-ultra-deep high-quality clastic rock reservoirs,followed by the late rapid deep burial process,and the progressive deep burial process has little contribution.展开更多
Considering the action mechanisms of overpressure on physical changes in skeleton particles of deep reservoir rocks and the differences in physical changes of skeleton particles under overpressure and hydrostatic pres...Considering the action mechanisms of overpressure on physical changes in skeleton particles of deep reservoir rocks and the differences in physical changes of skeleton particles under overpressure and hydrostatic pressure, the sandstone of the Jurassic Toutunhe Formation in the southern margin of Junggar Basin was taken as an example for physical modeling experiment to analyze the action mechanisms of overpressure on the physical properties of deep reservoirs. (1) In the simulated ultra-deep layer with a burial depth of 6000-8000 m, the mechanical compaction under overpressure reduces the remaining primary pores by about a half that under hydrostatic pressure. Overpressure can effectively suppress the mechanical compaction to allow the preservation of intergranular primary pores. (2) The linear contact length ratio under overpressure is always smaller than the linear contact length ratio under hydrostatic pressure at the same depth. In deep reservoirs, the difference between the mechanical compaction degree under overpressure and hydrostatic pressure shows a decreasing trend, the effect of abnormally high pressure to resist the increase of effective stress is weakened, and the degree of mechanical compaction is gradually close to that under hydrostatic pressure. (3) The microfractures in skeleton particles of deep reservoirs under overpressure are thin and long, while the microfractures in skeleton particles of deep reservoirs under hydrostatic pressure are short and wide. This difference is attributed to the probable presence of tension fractures in the rocks containing abnormally high pressure fluid. (4) The microfractures in skeleton particles under overpressure were mainly formed later than that under hydrostatic pressure, and the development degree and length of microfractures both extend deeper. (5) The development stages of microfractures under overpressure are mainly controlled by the development stages of abnormally high pressure and the magnitude of effective stress acting on the skeleton particles. Moreover, the development stages of microfractures in skeleton particles are more than those under hydrostatic pressure in deep reservoir. The multi-stage abnormally high pressure plays an important role in improving the physical properties of deep reservoirs.展开更多
According to the differences of structural deformation characteristics, the southern margin of the Junggar basin can be divided into two segments from east to west. Arcnate thrust-and-fold belts that protrude to the n...According to the differences of structural deformation characteristics, the southern margin of the Junggar basin can be divided into two segments from east to west. Arcnate thrust-and-fold belts that protrude to the north are developed in the eastern segment. There are three rows of en echelon thrust-and-fold belts in the western segment. Thrust and fold structures of basement-involved styles are developed in the first row, and decollement fold structures are formed from the second row to the third row. In order to study the factors controlling the deformation of structures, sand-box experiments have been devised to simulate the evolution of plane and profile deformation. The planar simulation results indicate that the orthogonal compression coming from Bogeda Mountain and the oblique compression with an angle of 75° between the stress and the boundary originating from North Tianshan were responsible for the deformation differences between the eastern part and the western part. The Miquan-Uriimqi fault in the basement is the pre-existing condition for generating fragments from east to west. The profile simulation results show that the main factors controlling the deformation in the eastern part are related to the decollement of Jurassic coal beds alone, while those controlling the deformation in the western segment are related to both the Jurassic coal beds and the Eogene clay beds. The total amount of shortening from the Yaomoshan anticline to the Gumudi anticline in the eastern part is -19.57 km as estimated from the simulation results, and the shortening rate is about 36.46%; that from the Qingshuihe anticline to the Anjihai anticline in the western part is -22.01 km as estimated by the simulation results, with a shortening rate of about 32.48%. These estimated values obtained from the model results are very close to the values calculated by means of the balanced cross section.展开更多
Well Gaotan 1 was tested a high yield oil and gas flow of more than 1 000 m^3 a day in the Cretaceous Qingshuihe Formation,marking a major breakthrough in the lower assemblage of the southern margin of Junggar Basin. ...Well Gaotan 1 was tested a high yield oil and gas flow of more than 1 000 m^3 a day in the Cretaceous Qingshuihe Formation,marking a major breakthrough in the lower assemblage of the southern margin of Junggar Basin. The lower assemblage in the southern margin of the Junggar Basin has favorable geological conditions for forming large Petroleum fields, including:(1) Multiple sets of source rocks, of which the Jurassic and Permian are the main source rocks, with a large source kitchen.(2) Multiple sets of effective reservoirs,namely Cretaceous Qingshuihe Formation, Jurassic Toutunhe Formation and the Khalza Formation etc.(3) Regional thick mudstone caprock of Cretaceous Tugulu Group, generally with abnormally high pressure and good sealing ability.(4) Giant structural traps and litho-stratigraphic traps are developed. The northern slope also has the conditions for large-scale litho-stratigraphic traps.(5) Static elements such as source rocks, reservoirs and caprocks are well matched, and the dynamic evolution is suitable for large oil and gas accumulation. The lower assemblage of the southern margin of the Junggar Basin has three favorable exploration directions, the Sikeshu Sag in the west part, the large structures in the middle and eastern part, and the northern slope.展开更多
In view of the difficulties in the study of lithofacies paleogeography and the low reliability of the distribution range of sedimentary sand bodies in the prototype basin caused by less deep drilling, complex seismic ...In view of the difficulties in the study of lithofacies paleogeography and the low reliability of the distribution range of sedimentary sand bodies in the prototype basin caused by less deep drilling, complex seismic imaging and low degree of exploration in the southern margin of Junggar Basin, NW China. A new method based on the source to sink idea was used to restore lithofacies paleogeography and predict glutenite distribution. In the restoration, apatite fission track age was used to define range and uplift time of macro-provenance;the range of provenance area and the migration process of lake shoreline were restored based on the quantitative relationship between gravel diameter and transportation distance, tectonic shortening and other geological parameters;drilling cores and field outcrop sedimentary structures were analyzed, and a series of maps of lithofacies paleogeographic evolution and distribution range of glutenite bodies were compiled. It is concluded that from Early Jurassic to Early Cretaceous, in the southern margin of Junggar Basin, the provenance area gradually expanded from south to north, the lake basin expanded, shrunk and expanded, and the paleoclimate changed from humid to drought to humid. The western section always had proximal fan delta deposits from the southern ancient Tianshan provenance developed, and in the middle and eastern sections, the provenance areas evolved from far source to near source, mainly river-delta, braided delta, fan delta and other sediments developed. The boundary between provenance areas of the western and middle sections is speculated to be Hongche fault zone. In an angle open to the northwest with the current basin edge line, the restored ancient lake shoreline controlled the heterogeneity of reservoirs in the delta plain belt and delta front belt on its both sides. The ancient lake shoreline, current stratigraphic denudation line and current basin margin line limit the types and scope of favorable reservoirs.This understanding provides an important geological basis for oil and gas exploration in the deep lower source-reservoir assemblage at the southern margin of Junggar Basin.展开更多
Through synthetic researches of multi-index geological records of Niya section, which are of high resolution in southern margin of Tarim Basin, this paper has reconstructed the sequences of paleoclimate in this region...Through synthetic researches of multi-index geological records of Niya section, which are of high resolution in southern margin of Tarim Basin, this paper has reconstructed the sequences of paleoclimate in this region during historical times (since about 4000a B.P.). During the last 4000 years, the area has experienced alternations of relative cold-moisture and relative warm-dry periods. Three evident cold-moisture periods and three warm-dry periods are identifing. The study shows that the human activities have an intimate relation with the evolution of paleoclimate in the southern Xinjiang. Paleoclimate has played very important role in influencing human being′s agricultural activities.展开更多
基金Supported by the National Natural Science Foundation of China(41872113,42172109,42172108)CNPC-China University of Petroleum(Beijing)Strategic Cooperation Project(ZLZX2020-02)+1 种基金National Key R&D Program Project(2018YFA0702405)China University of Petroleum(Beijing)Research Project(2462020BJRC002,2462020YXZZ020)。
文摘Taking the Lower Cretaceous Qingshuihe Formation in the southern margin of Junggar Basin as an example,the influences of the burial process in a foreland basin on the diagenesis and the development of high-quality reservoirs of deep and ultra-deep clastic rocks were investigated using thin section,scanning electron microscope,electron probe,stable isotopic composition and fluid inclusion data.The Qingshuihe Formation went through four burial stages of slow shallow burial,tectonic uplift,progressive deep burial and rapid deep burial successively.The stages of slow shallow burial and tectonic uplift not only can alleviate the mechanical compaction of grains,but also can maintain an open diagenetic system in the reservoirs for a long time,which promotes the dissolution of soluble components by meteoric freshwater and inhibits the precipitation of dissolution products in the reservoirs.The late rapid deep burial process contributed to the development of fluid overpressure,which effectively inhibits the destruction of primary pores by compaction and cementation.The fluid overpressure promotes the development of microfractures in the reservoir,which enhances the dissolution effect of organic acids.Based on the quantitative reconstruction of porosity evolution history,it is found that the long-term slow shallow burial and tectonic uplift processes make the greatest contribution to the development of deep-ultra-deep high-quality clastic rock reservoirs,followed by the late rapid deep burial process,and the progressive deep burial process has little contribution.
基金Supported by PetroChina Science and Technology Project(2021DJ0202).
文摘Considering the action mechanisms of overpressure on physical changes in skeleton particles of deep reservoir rocks and the differences in physical changes of skeleton particles under overpressure and hydrostatic pressure, the sandstone of the Jurassic Toutunhe Formation in the southern margin of Junggar Basin was taken as an example for physical modeling experiment to analyze the action mechanisms of overpressure on the physical properties of deep reservoirs. (1) In the simulated ultra-deep layer with a burial depth of 6000-8000 m, the mechanical compaction under overpressure reduces the remaining primary pores by about a half that under hydrostatic pressure. Overpressure can effectively suppress the mechanical compaction to allow the preservation of intergranular primary pores. (2) The linear contact length ratio under overpressure is always smaller than the linear contact length ratio under hydrostatic pressure at the same depth. In deep reservoirs, the difference between the mechanical compaction degree under overpressure and hydrostatic pressure shows a decreasing trend, the effect of abnormally high pressure to resist the increase of effective stress is weakened, and the degree of mechanical compaction is gradually close to that under hydrostatic pressure. (3) The microfractures in skeleton particles of deep reservoirs under overpressure are thin and long, while the microfractures in skeleton particles of deep reservoirs under hydrostatic pressure are short and wide. This difference is attributed to the probable presence of tension fractures in the rocks containing abnormally high pressure fluid. (4) The microfractures in skeleton particles under overpressure were mainly formed later than that under hydrostatic pressure, and the development degree and length of microfractures both extend deeper. (5) The development stages of microfractures under overpressure are mainly controlled by the development stages of abnormally high pressure and the magnitude of effective stress acting on the skeleton particles. Moreover, the development stages of microfractures in skeleton particles are more than those under hydrostatic pressure in deep reservoir. The multi-stage abnormally high pressure plays an important role in improving the physical properties of deep reservoirs.
基金financially supported by the National Natural Science Foundation of China(No.40972091)
文摘According to the differences of structural deformation characteristics, the southern margin of the Junggar basin can be divided into two segments from east to west. Arcnate thrust-and-fold belts that protrude to the north are developed in the eastern segment. There are three rows of en echelon thrust-and-fold belts in the western segment. Thrust and fold structures of basement-involved styles are developed in the first row, and decollement fold structures are formed from the second row to the third row. In order to study the factors controlling the deformation of structures, sand-box experiments have been devised to simulate the evolution of plane and profile deformation. The planar simulation results indicate that the orthogonal compression coming from Bogeda Mountain and the oblique compression with an angle of 75° between the stress and the boundary originating from North Tianshan were responsible for the deformation differences between the eastern part and the western part. The Miquan-Uriimqi fault in the basement is the pre-existing condition for generating fragments from east to west. The profile simulation results show that the main factors controlling the deformation in the eastern part are related to the decollement of Jurassic coal beds alone, while those controlling the deformation in the western segment are related to both the Jurassic coal beds and the Eogene clay beds. The total amount of shortening from the Yaomoshan anticline to the Gumudi anticline in the eastern part is -19.57 km as estimated from the simulation results, and the shortening rate is about 36.46%; that from the Qingshuihe anticline to the Anjihai anticline in the western part is -22.01 km as estimated by the simulation results, with a shortening rate of about 32.48%. These estimated values obtained from the model results are very close to the values calculated by means of the balanced cross section.
基金Supported by the PetroChina Exploration&Production Company Project(kt2018-03-01)
文摘Well Gaotan 1 was tested a high yield oil and gas flow of more than 1 000 m^3 a day in the Cretaceous Qingshuihe Formation,marking a major breakthrough in the lower assemblage of the southern margin of Junggar Basin. The lower assemblage in the southern margin of the Junggar Basin has favorable geological conditions for forming large Petroleum fields, including:(1) Multiple sets of source rocks, of which the Jurassic and Permian are the main source rocks, with a large source kitchen.(2) Multiple sets of effective reservoirs,namely Cretaceous Qingshuihe Formation, Jurassic Toutunhe Formation and the Khalza Formation etc.(3) Regional thick mudstone caprock of Cretaceous Tugulu Group, generally with abnormally high pressure and good sealing ability.(4) Giant structural traps and litho-stratigraphic traps are developed. The northern slope also has the conditions for large-scale litho-stratigraphic traps.(5) Static elements such as source rocks, reservoirs and caprocks are well matched, and the dynamic evolution is suitable for large oil and gas accumulation. The lower assemblage of the southern margin of the Junggar Basin has three favorable exploration directions, the Sikeshu Sag in the west part, the large structures in the middle and eastern part, and the northern slope.
基金Supported by China National Science and Technology Major Project (2016ZX05003-001)PetroChina Science and Technology Project (2019B-0505,2021DJ0202,2021DJ0302)。
文摘In view of the difficulties in the study of lithofacies paleogeography and the low reliability of the distribution range of sedimentary sand bodies in the prototype basin caused by less deep drilling, complex seismic imaging and low degree of exploration in the southern margin of Junggar Basin, NW China. A new method based on the source to sink idea was used to restore lithofacies paleogeography and predict glutenite distribution. In the restoration, apatite fission track age was used to define range and uplift time of macro-provenance;the range of provenance area and the migration process of lake shoreline were restored based on the quantitative relationship between gravel diameter and transportation distance, tectonic shortening and other geological parameters;drilling cores and field outcrop sedimentary structures were analyzed, and a series of maps of lithofacies paleogeographic evolution and distribution range of glutenite bodies were compiled. It is concluded that from Early Jurassic to Early Cretaceous, in the southern margin of Junggar Basin, the provenance area gradually expanded from south to north, the lake basin expanded, shrunk and expanded, and the paleoclimate changed from humid to drought to humid. The western section always had proximal fan delta deposits from the southern ancient Tianshan provenance developed, and in the middle and eastern sections, the provenance areas evolved from far source to near source, mainly river-delta, braided delta, fan delta and other sediments developed. The boundary between provenance areas of the western and middle sections is speculated to be Hongche fault zone. In an angle open to the northwest with the current basin edge line, the restored ancient lake shoreline controlled the heterogeneity of reservoirs in the delta plain belt and delta front belt on its both sides. The ancient lake shoreline, current stratigraphic denudation line and current basin margin line limit the types and scope of favorable reservoirs.This understanding provides an important geological basis for oil and gas exploration in the deep lower source-reservoir assemblage at the southern margin of Junggar Basin.
基金Great Base Project of National Natural Science Foundation of China (No.49761007 and 49861005) International Science Research As
文摘Through synthetic researches of multi-index geological records of Niya section, which are of high resolution in southern margin of Tarim Basin, this paper has reconstructed the sequences of paleoclimate in this region during historical times (since about 4000a B.P.). During the last 4000 years, the area has experienced alternations of relative cold-moisture and relative warm-dry periods. Three evident cold-moisture periods and three warm-dry periods are identifing. The study shows that the human activities have an intimate relation with the evolution of paleoclimate in the southern Xinjiang. Paleoclimate has played very important role in influencing human being′s agricultural activities.
