Improved design of special boundary elements for T-shaped reinforced concrete walls

This study examines the design provisions of the Chinese GB 50011-2010 code for seismic design of buildings for the special boundary elements of T-shaped reinforced concrete walls and proposes an improved design method. Comparison of the design provisions of the GB 50011-2010 code and those of the American code ACI 318-14 indicates a possible deficiency in the T-shaped wall design provisions in GB 50011-2010. A case study of a typical T-shaped wall designed in accordance with GB 50011-2010 also indicates the insufficient extent of the boundary element at the non-flange end and overly conservative design of the flange end boundary element. Improved designs for special boundary elements ofT-shaped walls are developed using a displacement-based method. The proposed design formulas produce a longer boundary element at the non-flange end and a shorter boundary element at the flange end, relative to those of the GB 50011-2010 provisions. Extensive numerical analysis indicates that T-shaped walls designed using the proposed formulas develop inelastic drift of 0.01 for both cases of the flange in compression and in tension.

Role of Ordering Energy in Formation of Grain Structure and Special Boundaries Spectrum in Ordered Alloys with L12 Superstructure

It was revealed that an average energy of special boundaries is proportional to APB energy in the alloys with the L12 superstructure. This fact proves the appearance of the GAPBs in the planes of location of special boundaries in coincidence sites of ordered alloys. It was determined that the more energy of special boundaries in ordered alloys, the more energy of complex stacking fault. There is a correlation between the distribution of special boundaries as a function its relative energy and ordering energy: the more ordering energy, the more degree of washed away of distribution. The correlation between average relative energy of special boundaries and ordering energy was detected: the more ordering energy, the more average energy of special boundaries. The reverse dependence between ordering energy and average number of special boundaries in grains limited by boundaries of general type was discovered.

APPLICATION OF TREFFTZ BEM TO ANTI-PLANE PIEZOELECTRIC PROBLEM

Anti-plane electroelastic problems are studied by the Trefftz boundary element method （BEM） in this paper. The Trefftz BEM is based on a weighted residual formulation and indirect boundary approach. In particular the point-collocation and Galerkin techniques, in which the basic unknowns are the retained expansion coefficients in the system of complete equations, are considered. Furthermore, special Trefftz functions and auxiliary functions which satisfy exactly the specified boundary conditions along the slit boundaries are also used to derive a special purpose element with local defects. The path-independent integral is evaluated at the tip of a crack to determine the energy release rate for a mode Ⅲ fracture problem. In final, the accuracy and efficiency of the Trefftz boundary element method are illustrated by an example and the comparison is made with other methods.