Remote Control of Unitary Air Conditioner Based on Manufacturing Message Specification

Traditional air conditioner used to be in local control mode. However, with the development of modern information technology, the control of air conditioner will have to support many more functions. As a first step in such a development, we have implemented a remote monitoring system of unitary air conditioners, using the manufacturing message specification (MMS). MMS is an OSI application protocol designed for the remote control and monitoring of real devices. The functions supported are those that an operator would do normally at the console of the unitary air conditioner. Due to the accomplishment of UMCS (Unitary air conditioner MMS Control System), there will be a leap of the application of MMS and the control technology of unitary air conditioner.

Basic regulatory science behind drug substance and drug product specifications of monoclonal antibodies and other protein therapeutics

In this review,we focus on providing basics and examples for each component of the protein therapeutic specifications to interested pharmacists and biopharmaceutical scientists with a goal to strengthen understanding in regulatory science and compliance.Pharmaceutical specifications comprise a list of important quality attributes for testing,references to use for test procedures,and appropriate acceptance criteria for the tests,and they are set up to ensure that when a drug product is administered to a patient,its intended therapeutic benefits and safety can be rendered appropriately.Conformance of drug substance or drug product to the specifications is achieved by testing an article according to the listed tests and analytical methods and obtaining test results that meet the acceptance criteria.Quality attributes are chosen to be tested based on their quality risk,and consideration should be given to the merit of the analytical methods which are associated with the acceptance criteria of the specifications.Acceptance criteria are set forth primarily based on efficacy and safety profiles,with an increasing attention noted for patient-centric specifications.Discussed in this work are related guidelines that support the biopharmaceutical specification setting,how to set the acceptance criteria,and examples of the quality attributes and the analytical methods from 60 articles and 23 pharmacopeial monographs.Outlooks are also explored on process analytical technologies and other orthogonal tools which are on-trend in biopharmaceutical characterization and quality control.

Dynamic Output Feedback Control Synthesis with Mixed Frequency Small Gain Specifications

这篇论文与混合频率为线性连续时间的系统经由动态输出反馈涉及控制合成问题小获得说明。为设计动态产量反馈控制器的一个新方法被介绍以便结果靠近环的系统是 asymptotically 稳定的并且在两个有限频率范围和全部频率范围满足小获得说明的要求。设计条件以一套线性矩阵不平等(LMI ) 的答案被给。最后，一个数字例子被给与存在那个比较说明设计过程和建议方法的优点。

CONVEX CONTROLLER DESIGN APPLIED TO AC INDUCTION MOTOR TO SATISFY MULTIPLE SIMULTANEOUS SPECIFICATIONS

The application of a closed-loop specification oriented feedback control design method, which addresses the design of controllers to satisfy multiple simultaneous conflicting closed-loop performance specifications is presented. The proposed approach is well suited to the design of controllers which must meet a set of conflicting performance specifications. Gain tuning is central to the design process, however, the tuning process is greatly simplified over that presented by the problem of tuning a PID controller for example. The proposed control method is applied to an AC induction motor, with an inner-loop flux vector controller applied to design a position control system. Experimental results verify the effectiveness of this method.

Technical Specifications for Integrated Prevention and Control of Yellow Aphids

[Objectives]The purpose was to standardize the scientific prevention and control of yellow aphids and effectively control their occurrence and spread.[Methods]On the basis of consulting domestic and foreign data and standards extensively,a series of related trials were carried out.[Results]Technical specifications for integrated prevention and control of yellow aphids were formulated.[Conclusions]It is of great significance to the healthy and sustainable development of the fruit trees’industry,the implementation of standardized management,the reduction of pesticide uses,and the reduction of damage caused by yellow aphids to fruit trees,and also provides urgent-needed technical support and guarantee for the prevention and control of yellow aphids.

An Academic Summary of the International Seminar Series on “Protection of the Rights of Specific Groups in Pandemic Prevention and Control”

The international semiinar on"Protection of the Rights of Specific Groups in Pandemic Prevention and Control",organized by the Institute of Human Rights,Wuhan University,under the guidance of the China Society for Human Rights Studies,was held online on May 23,2020.Nearly 50 scholars and practitioners from domestic and foreign universities and research institutions conducted discussions and exchanges focusing on a series of topics including"Leave No One Behind:To Guarantee Specific Groups’Access to Public Service under the Pandemic","Justice for All:Prevention and Relief of Discrimination against Specific Groups",etc.

THE EXTENSIVENESS AND SPECIFICITY OF EFFECT OF ELECTROACUPUNCTURE AT DIFFERENT ACUPOINTS ON NOCICEPTIVE RESPONSE OF CONVERGENT NEURONS IN TRIGEMINAL NUCLEUS CAUDALIS

Experiments were carried out on rats anaesthetized with uraethane. The sponta-neous discharges and nociceptive responses of convergent neurons in the right trigerninal nucleus cau-dalis(TNC) to noxious stimuli at receptive field (cheek) were recorded extracellularly with glass mi-cro-electrode. Electroacupuncture (EA ) was applied at bilateral " Xiaguan" (ST 7 on face ) or "Zusanli" (ST 36 on shank) acupoint with Iow (2V) and high (18V) intensity. The noclceptive re-sponse of convergent neurons in TNC could be inhihited by low intensity EA applied at "Xiaguan" butnot "Zusanlil", showing the specificity of acupoints. High intensity EA at either "Xiaguan" or "Zusan-li" also reduced the nociceptive responses, showing the analgesic extensiveness of acupoints. We sug-gest that "the gate of control" mechanism plays a main role in low intensity EA and "diffuse noxiousinhibitory controls" (DNIC) rnechanism does so in high intensity EA.The results suggest that we should pay attention to the location of acupoints,

Influence of light availability on the specific density,size and sinking loss of Anabaena flos-aquae and Scenedesmus obliquus

Harmful algal blooms in eutrophic waters pose a serious threat to freshwater ecosystems and human health. In-situ light availability control is one of the most commonly used technologies to suppress algae in lakes and reservoirs. To develop a better understanding of the effects of light on algal growth, specific density, colony size and sinking loss, Anabaena flos-aquae(cyanobacteria) and Scenedesmus obliquus(green algae) were evaluated in varying light scenarios. The results showed that the specific density and colony size of these two species varied during growth, and there were obvious differences among the light scenarios. At the end of exponential phase, S. obliquus incubated under light-limited condition maintained a higher specific density and formed larger aggregates, whereas A. flos-aquae formed a longer filament length. Both species exhibited higher sinking loss rates with lower light availability. These results implied that the sinking loss rate was not always constant but should be considered as a variable response to the change of light availability, and in-situ light availability control might result in a significant increase of the sinking loss of algae due to the change of size and specific density, thereby further affecting the algal biomass in the water column.

An Approach to Generation of Process-Oriented Requirements Specification

In service-oriented computing, process model may serve as a link to connect users’ requirements with Web Services. In this paper, we propose an approach and related key techniques to generate process-oriented requirements specification from user’s goal. For this purpose, a requirements description language named SORL will be provided to capture users’ requirements. Then, a unified requirements meta-modeling frame RPGS will be used to construct reusable domain assets, which is the basis of generating requirements specifications. Finally, a set of rules are defined to extract process control structures from users’ requirements described with SORL, so that we can convert requirements description into process-oriented requirements specification smoothly.

常态化防控前后院内MDRO感染变化趋势分析

目的探讨常态化防控前后院内多重耐药菌(MDRO)感染变化趋势,为医院采取科学、规范的MDRO防控措施提供参考依据。方法收集2017—2022年住院患者送检标本MDRO中特定菌株检出数量、种类及感染情况等临床资料,分析常态化防控前、后MDRO感染情况。结果常态化防控前、后,MDRO特定菌株检出率分别为12.940%、15.745%,常态化防控后的MDRO特定菌株检出率高于常态化防控前,差异具有统计学意义(P<0.05);常态化防控前、后,MDRO特定菌株医院感染率分别为0.066%、0.072%,常态化防控前、后的MDRO特定菌株医院感染率比较,差异无统计学意义(P>0.05)。常态化防控后,耐碳青霉烯类铜绿假单胞菌(CR-PA)、耐碳青霉烯类鲍曼不动杆菌(CR-AB)的检出率均高于常态化防控前,差异具有统计学意义(P<0.05);常态化防控前、后,耐甲氧西林金黄色葡萄球菌(MRSA)、耐碳青霉烯肠杆菌科细菌(CRE)的检出率比较,差异无统计学意义(P>0.05);常态化防控后,MRSA、CRE的医院感染率略低于常态化防控前,CRAB医院感染率略高于常态化防控前,CR-PA的医院感染率未发生变化。常态化防控后,手术部位感染占比低于常态化防控前,差异具有统计学意义(P<0.05)。结论常态化防控可降低手术部位的感染率,但对于MDRO感染的精准防控仍存在一定的局限。

Cascade control based on minimum sensitivity in outer loop for processes with time delay

A new cascade control program was proposed based on modified internal model control to handle stable,unstable and integrating processes with time delay.The program had totally four controllers of which the secondary loop had two controllers and the primary loop had two controllers.The two secondary loop controllers were designed using IMC technique.They were decoupled completely and could be adjusted independently,which avoided the undesirable influence on performance of the primary controllers.The main controller in the primary loop was devised as a PID using the method of minimum sensitivity,which could guarantee not only the nominal performance but also the robust stability of the system.A setpoint filter was added in the primary loop to improve the tracking performance.All the controllers of the two closed-loops were designed analytically,and could be adjusted and optimized by single parameter respectively.Simulations were carried out on three various processes with time delay,and the results show that the proposed method can provide a better performance of both set-point tracking and disturbance rejection and robustness against parameters perturbation.

Controlled/"Living"?Radical Polymerization of (-)-Menthyl Methacrylate

The atom transfer radical polymerization(ATRP) of (-)-menthyl methacrylate((-)-MnMA) mediated by CuCl/bipyridine and ethyl 2-bromopropionate or 1-phenylethyl bromide in THF system has been studied. The dependence of the specific rotation on molecular weight and the CD of Poly((-)-MnMA) thus obtained was investigated.

Development of a roof bolter drilling control process to reduce the generation of respirable dust

The drilling operation in the roof bolting process,especially in hard rock,generates excessive respirable coal and quartz dusts,which could expose the roof bolting operator to continued health risks.Previous research has shown that the amount of respirable dust produced is dependent on the main drilling parameters,specifically the drilling rotational and penetration rate.In this paper,a roof bolter drilling control process was proposed to reduce the generation of respirable dust.Based on the analysis of laboratory drilling test results,a rational drilling control process(adjusting rotational and penetration rates)to achieve the optimal drilling parameter for different rock types was proposed.In this process,the ratio between specific energy and rock uniaxial compressive strength was used as the index to determine the optimal operation point.The recommended drilling operation range for the rock type used in the experiment was provided,and the reduction in respirable dust generation was demonstrated.By following this control process,the drilling efficiency can be monitored in real time,so the system can stay in a relatively high-energy efficiency with less respirable dust production from the drilling source.This algorithm is targeted to be incorporated into the current roof bolter drilling control system for drilling automation so that a safe and productive drilling operation can be conducted in a healthy working environment.

Comparison between pinning control of different chaotic complex dynamical networks

The stabilization properties of various typical complex dynamical networks composed of chaotic nodes are theoretically investigated and numerically simulated in detail. Some local stability properties of such pinned networks are derived and the valid stability regions are estimated based on eigenvalue analysis. Numerical simulations of such networks are given to explain why significantly less local controllers are needed by the specifically pinning scheme, which pins the most highly connected nodes in scale-free networks, than that required by the randomly pinning scheme. Also, it is explained why there is no significant difference between the two schemes for controlling random-graph networks and small-world networks.

Architecture Design for Internet-Based Control Systems

The Internet is playing an important role in information retrieval, and additionally industrial process manipulation. This paper describes an approach to writing requirements specifications for Internet-based control systems, from which architectures can be derived. The requirements specifications developed are described in terms of a functional model, which is then extended to form an information architecture. Distinct from the functional model, the information architecture provides an indication as to the architectural structure of subsequently developed Internet-based control systems. Three general control structures are generated from the analysis of an information architecture. An integrated-distributed architecture is derived as an ideal implementation, in which a control system is linked to the Internet at all levels of a control system hierarchy.

Similarities of Model Predictive Control and Constrained Direct Inverse

To reach an acceptable controller strategy and tuning it is important to state what is considered “good”. To do so one can set up a closed-loop specification or formulate an optimal control problem. It is an interesting question, if the two can be equivalent or not. In this article two controller strategies, model predictive control (MPC) and constrained direct inversion (CDI) are compared in controlling the model of a pilot-scale water heater. Simulation experiments show that the two methods are similar, if the manipulator movements are not punished much in MPC, and they act practically the same when a filtered reference signal is applied. Even if the same model is used, it is still important to choose tuning parameters appropriately to achieve similar results in both strategies. CDI uses an analytic approach, while MPC uses numeric optimization, thus CDI is more computationally efficient, and can be used either as a standalone controller or to supplement numeric optimization.

Wireless Hybrid QoS Architecture with an Enhancement of Fair Intelligent Congestion Control

More subtle and explicit QoS control mechanisms are required at the radio access level, even though the simple and scalable Differentiated Services (DiffServ) QoS control model is acceptable for the core of the network. At the radio access level, available resources are severely limited and the degree of traffic aggregation is not significant, thus rendering the DiffServ principles less effective. In this paper we present a suitable hybrid QoS architecture framework to address the problem. At the wireless access end, the local QoS mechanism is designed in the context of IEEE 802.11 WLAN with 802.11e QoS extensions;so streams of those session-based applications are admitted, established according to the traffic profile they require, and guaranteed. As the core in the Admission Control of the hybrid QoS architecture, the Fair Intelligent Congestion Control (FICC) algorithm is applied to provide fairness among traffic aggregates and control congestion at the bottleneck interface between the wireless link and the network core via mechanisms of packet scheduling, buffer management, feedback and adjustments. It manages effectively the overloading scenario by preventing traffic violation from uncontrolled traffic, and providing guarantee to the priority traffic in terms of guaranteed bandwidth allocation and specified delay.

欧盟出口管制回顾与展望

欧盟出口管制的实施关系各国的共同安全及经济利益,一直以来备受各界关注。随着大国博弈的加剧和俄乌危机的持续,欧盟出口管制面临着外部环境巨变以及框架机制待完善的双重挑战。欧盟亟待协调国别管制与联盟管制的关系,完善新兴技术的管制清单,在国际上争取更加统一和强大的欧盟声音。欧盟重塑出口管制将影响中欧的经贸合作以及技术合作,我国政府和企业应坚持以积极合作对抗“脱钩”,以自主创新抵制“断链”,充分挖掘国内大市场的潜力,在双循环新发展格局中,积极参与国际分工秩序,维护我国经济安全利益。

油田开发中精细油藏描述成果平台建设研究

精细油藏描述是油田开发最基础的工作之一,历来受到研究者的高度重视。目前精细油藏描述中存在的突出问题主要包括研究成果继承性差、基础资料存储不规范、专业软件需求缺口大、成果应用需加强和成果存储管理不规范等5方面。文章通过精细油藏描述成果平台建设,可以从基础数据的整理准备、专业软件共享和协同研究、成果标准规范化存储管理等方面解决上述问题。精细油藏描述数据管理主要包括项目整体数据信息的统计和分析、项目研究数据的整理和统计、成果平台与其他数据平台的对接和数据调用等。精细油藏描述协同研究过程主要包括专业软件的平台实现和使用、不同专业软件之间中间成果的转换和调用、研究工作的自动化实现和完成。精细油藏描述成果存储和管理主要包括成果上传管理中格式的统一规范、成果存储上传中的质量控制、成果生产应用中的跟踪和更新。

A Solution Based on Modeling and Code Generation for Embedded Control System

With the development of computer technology, embedded control system plays an important role in modern industry. For the embedded system, traditional development methods are time-consuming and system is not easy to maintain. Domain-specific modeling provides a solution for the problems. In this paper, we proposed development architecture for embedded control systems based on MIC. GME is used to construct meta-model and application model, model in-terpreter interprets model and stores model information in xml format document. The final cross-platform codes are automatically generated by different templates and xml format document. This development method can reduce time and cost in the lifecycle of system development.