Fluid identification and tight oil layer classification for the southwestern Mahu Sag,Junggar Basin using NMR logging-based spectrum decomposition

The intricate distribution of oil and water in tight rocks makes pinpointing oil layers challenging.While conventional identification methods offer potential solutions,their limited accuracy precludes them from being effective in their applications to unconventional reservoirs.This study employed nuclear magnetic resonance(NMR)spectrum decomposition to dissect the NMR T_(2)spectrum into multiple subspectra.Furthermore,it employed laboratory NMR experiments to ascertain the fluid properties of these sub-spectra,aiming to enhance identification accuracy.The findings indicate that fluids of distinct properties overlap in the T_(2)spectra,with bound water,movable water,bound oil,and movable oil appearing sequentially from the low-value zone to the high-value zone.Consequently,an oil layer classification scheme was proposed,which considers the physical properties of reservoirs,oil-bearing capacity,and the characteristics of both mobility and the oil-water two-phase flow.When applied to tight oil layer identification,the scheme's outcomes align closely with actual test results.A horizontal well,deployed based on these findings,has produced high-yield industrial oil flow,underscoring the precision and dependability of this new approach.

Study of seismic spectrum decomposition based on CEEMD

Empirical mode decomposition( EMD) is a powerful tool of time-frequency analysis. EMD decomposes a signal into a series of sub-signals,called Intrinsic mode functions( IMFs). Each IMF contains different frequency components which can deal with the nonlinear and non-stationary of signal. Complete ensemble empirical mode decomposition( CEEMD) is an improved algorithm,which can provide an accurate reconstruction of the original signal and better spectral separation of the modes. The authors studied the decomposition result of a synthetic signal obtained from EMD and CEEMD. The result shows that the CEEMD has suitability in spectrum decomposition time-frequency analysis. Compared with traditional methods,a higher time-frequency resolution is obtained through verifying the method on both synthetic and real data.

A decomposition method of nuclear magnetic resonance T2 spectrum for identifying fluid properties

Based on analysis of NMR T2 spectral characteristics,a new method for identifying fluid properties by decomposing T2 spectrum through signal analysis has been proposed.Because T2 spectrum satisfies lognormal distribution on transverse relaxation time axis,the T2 spectrum can be decomposed into 2 to 5 independent component spectra by fitting the T2 spectrum with Gauss functions.By analyzing the free relaxation response characteristics of crude oil and formation water,the dynamic response characteristics of the core mutual drive between oil and water,the petrophysical significance of each component spectrum is clarified.T2 spectrum can be decomposed into clay bound water component spectrum,capillary bound fluid component spectrum,micropores fluid component spectrum and macropores fluid component spectrum.According to the nature of crude oil in the target area,the distribution range of T2 component spectral peaks of oil-bearing reservoir is 165-500 ms on T2 time axis.This range can be used to accurately identify fluid properties.This method has high adaptability in identifying complex oil and water layers in low porosity and permeability reservoirs.

Decomposition of fissile isotope antineutrino spectra using convolutional neural network

Recent reactor antineutrino experiments have observed that the neutrino spectrum changes with the reactor core evolution and that the individual fissile isotope antineutrino spectra can be decomposed from the evolving data,providing valuable information for the reactor model and data inconsistent problems.We propose a machine learning method by building a convolutional neural network based on a virtual experiment with a typical short-baseline reactor antineutrino experiment configuration:by utilizing the reactor evolution information,the major fissile isotope spectra are correctly extracted,and the uncertainties are evaluated using the Monte Carlo method.Validation tests show that the method is unbiased and introduces tiny extra uncertainties.

FAULT DIAGNOSIS APPROACH FOR ROLLER BEARINGS BASED ON EMPIRICAL MODE DECOMPOSITION METHOD AND HILBERT TRANSFORM

Based upon empirical mode decomposition (EMD) method and Hilbert spectrum, a method for fault diagnosis of roller bearing is proposed. The orthogonal wavelet bases are used to translate vibration signals of a roller bearing into time-scale representation, then, an envelope signal can be obtained by envelope spectrum analysis of wavelet coefficients of high scales. By applying EMD method and Hilbert transform to the envelope signal, we can get the local Hilbert marginal spectrum from which the faults in a roller bearing can be diagnosed and fault patterns can be identified. Practical vibration signals measured from roller bearings with out-race faults or inner-race faults are analyzed by the proposed method. The results show that the proposed method is superior to the traditional envelope spectrum method in extracting the fault characteristics of roller bearings.

Optimization design of anti-seismic engineering measures for intake tower based on non-dominated sorting genetic algorithm-Ⅱ

High-rise intake towers in high-intensity seismic areas are prone to structural safety problems under vibration.Therefore,effective and low-cost anti-seismic engineering measures must be designed for protection.An intake tower in northwest China was considered the research object,and its natural vibration characteristics and dynamic response were first analyzed using the mode decomposition response spectrum method based on a three-dimensional finite element model.The non-dominated sorting genetic algorithm-II(NSGA-II)was adopted to optimize the anti-seismic scheme combination by comprehensively considering the dynamic tower response and variable project cost.Finally,the rationality of the original intake tower antiseismic design scheme was evaluated according to the obtained optimal solution set,and recommendations for improvement were proposed.The method adopted in this study may provide significant references for designing anti-seismic measures for high-rise structures such as intake towers located in high-intensity earthquake areas.

The Characterization of Certain Quantum Stochastic Stationary Process

In this paper we will obtain a Stone type theorem under the frame of Hilbert C＊-module, such that the classical Stone theorem is our special case. Then we use it as a main tool to obtain a spectrum decomposition theorem of certain stationary quantum stochastic process. In the end, we will give it an interpretation in statistical mechanics of multi-linear response.

Unified calculation of eigen-solutions in power systems based on matrix perturbation theory

Calculation of eigen-solutions plays an important role in the small signal stability analysis of power systems.In this paper,a novel approach based on matrix perturbation theory is proposed for the calculation of eigen-solutions in a perturbed system.Rigorous theoretical analysis is conducted on the solution of distinct,multiple,and close eigen-solutions,respectively,under perturbations of parameters.The computational flowchart of the unified solution of eigen-solutions is then proposed,aimed toward obtaining eigen-solutions of a perturbed system directly with algebraic formulas without solving an eigenvalue problem repeatedly.Finally,the effectiveness of the matrix perturbation based approach for eigen-solutions’calculation in power systems is verified by numerical examples on a two-area four-machine system.

A method of searching for supernova candidates from massive galaxy spectra

This paper presents a novel spectroscopic method for searching for supernova candidates from massive galaxy spectra,which is expected to be applied to the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST).This method includes mainly five steps.The first step is spectral preprocessing,including removing spectral noise using wavelet transform,spectral de-redshift,etc.The second step is decomposition of galactic spectra;we can get the galaxy component and supernova component and calculate the Supernova Statistical Characterization Vector (SNSCV) of each galaxy spectrum.The third step is to decrease samples in all the galaxy spectral datasets according to SNSCV of each spectrum,and to use the LOF (Local Outlier Factor)-based outlier detection algorithm to obtain the preliminary selected spectral data.The fourth step is template matching by cross-correlation,according to the matched results we get the secondary selected spectral data.Finally,we choose the final supernova candidates manually through checking the spectral features characteristic of a supernova.By the spectroscopic method proposed in this paper,thirty-six supernova candidates have been detected in a dataset including 294843 galaxy spectra from the Sloan Digital Sky Survey Data Release 7.Nine of these objects are detected first and the other twenty-seven have been reported in other publications (fifteen of which are detected and reported first by us).The twenty-four new super-nova candidates include twenty Ia type supernova candidates,three Ic type supernova candidates and one II type supernova candidate.