This paper studies the proactive spec-trum monitoring with one half-duplex spectrum moni-tor(SM)to cope with the potential suspicious wireless powered communications(SWPC)in dynamic spec-trum sharing networks.The jamm...This paper studies the proactive spec-trum monitoring with one half-duplex spectrum moni-tor(SM)to cope with the potential suspicious wireless powered communications(SWPC)in dynamic spec-trum sharing networks.The jamming-assisted spec-trum monitoring scheme via spectrum monitoring data(SMD)transmission is proposed to maximize the sum ergodic monitoring rate at SM.In SWPC,the suspi-cious communications of each data block occupy mul-tiple independent blocks,with a block dedicated to the wireless energy transfer by the energy-constrained suspicious nodes with locations in a same cluster(symmetric scene)or randomly distributed(asymmet-ric scene)and the remaining blocks used for the in-formation transmission from suspicious transmitters(STs)to suspicious destination(SD).For the sym-metric scene,with a given number of blocks for SMD transmission,namely the jamming operation,we first reveal that SM should transmit SMD signal(jam the SD)with tolerable maximum power in the given blocks.The perceived suspicious signal power at SM could be maximized,and thus so does the correspond-ing sum ergodic monitoring rate.Then,we further reveal one fundamental trade-off in deciding the op-timal number of given blocks for SMD transmission.For the asymmetric scene,a low-complexity greedy block selection scheme is proposed to guarantee the optimal performance.Simulation results show that the jamming-assisted spectrum monitoring schemes via SMD transmission achieve much better perfor-mance than conventional passive spectrum monitor-ing,since the proposed schemes can obtain more accu-rate and effective spectrum characteristic parameters,which provide basic support for fine-grained spectrum management and a solution for spectrum security in dynamic spectrum sharing network.展开更多
Cooperative spectrum monitoring with multiple sensors has been deemed as an efficient mechanism for improving the monitoring accuracy and enlarging the monitoring area in wireless sensor networks.However,there exists ...Cooperative spectrum monitoring with multiple sensors has been deemed as an efficient mechanism for improving the monitoring accuracy and enlarging the monitoring area in wireless sensor networks.However,there exists redundancy among the spectrum data collected by a sensor node within a data collection period,which may reduce the data uploading efficiency.In this paper,we investigate the inter-data commonality detection which describes how much two data have in common.We define common segment set and divide it into six categories firstly,then a method to measure a common segment set is conducted by extracting commonality between two files.Moreover,the existing algorithms fail in finding a good common segment set,so Common Data Measurement(CDM)algorithm that can identify a good common segment set based on inter-data commonality detection is proposed.Theoretical analysis proves that CDM algorithm achieves a good measurement for the commonality between two strings.In addition,we conduct an synthetic dataset which are produced randomly.Numerical results shows that CDM algorithm can get better performance in measuring commonality between two binary files compared with Greedy-String-Tiling(GST)algorithm and simple greedy algorithm.展开更多
In a drilling process, the power spectrum of the drilling force is related tothe tool wear and is widely applied in the monitoring of tool wear. But the feature extraction andidentification of the power spectrum have ...In a drilling process, the power spectrum of the drilling force is related tothe tool wear and is widely applied in the monitoring of tool wear. But the feature extraction andidentification of the power spectrum have always been an unresolved difficult problem. This papersolves it through decomposition of the power spectrum in multilayers using wavelet transform andextraction of the low frequency decomposition coefficient as the envelope information of the powerspectrum. Intelligent identification of the tool wear status is achieved in the drilling processthrough fusing the wavelet decomposition coefficient of the power spectrum by using a BP (BackPropagation) neural network. The experimental results show that the features of the power spectrumcan be extracted efficiently through this method, and the trained neural networks show highidentification precision and the ability of extension.展开更多
基金the Natural Science Foun-dations of China(No.62171464,61771487)the Defense Science Foundation of China(No.2019-JCJQ-JJ-221).
文摘This paper studies the proactive spec-trum monitoring with one half-duplex spectrum moni-tor(SM)to cope with the potential suspicious wireless powered communications(SWPC)in dynamic spec-trum sharing networks.The jamming-assisted spec-trum monitoring scheme via spectrum monitoring data(SMD)transmission is proposed to maximize the sum ergodic monitoring rate at SM.In SWPC,the suspi-cious communications of each data block occupy mul-tiple independent blocks,with a block dedicated to the wireless energy transfer by the energy-constrained suspicious nodes with locations in a same cluster(symmetric scene)or randomly distributed(asymmet-ric scene)and the remaining blocks used for the in-formation transmission from suspicious transmitters(STs)to suspicious destination(SD).For the sym-metric scene,with a given number of blocks for SMD transmission,namely the jamming operation,we first reveal that SM should transmit SMD signal(jam the SD)with tolerable maximum power in the given blocks.The perceived suspicious signal power at SM could be maximized,and thus so does the correspond-ing sum ergodic monitoring rate.Then,we further reveal one fundamental trade-off in deciding the op-timal number of given blocks for SMD transmission.For the asymmetric scene,a low-complexity greedy block selection scheme is proposed to guarantee the optimal performance.Simulation results show that the jamming-assisted spectrum monitoring schemes via SMD transmission achieve much better perfor-mance than conventional passive spectrum monitor-ing,since the proposed schemes can obtain more accu-rate and effective spectrum characteristic parameters,which provide basic support for fine-grained spectrum management and a solution for spectrum security in dynamic spectrum sharing network.
基金supported in part by the National Natural Science Foundation of China(No.61901328)the China Postdoctoral Science Foundation (No. 2019M653558)+1 种基金the Fundamental Research Funds for the Central Universities (No. CJT150101)the Key project of National Natural Science Foundation of China (No. 61631015)
文摘Cooperative spectrum monitoring with multiple sensors has been deemed as an efficient mechanism for improving the monitoring accuracy and enlarging the monitoring area in wireless sensor networks.However,there exists redundancy among the spectrum data collected by a sensor node within a data collection period,which may reduce the data uploading efficiency.In this paper,we investigate the inter-data commonality detection which describes how much two data have in common.We define common segment set and divide it into six categories firstly,then a method to measure a common segment set is conducted by extracting commonality between two files.Moreover,the existing algorithms fail in finding a good common segment set,so Common Data Measurement(CDM)algorithm that can identify a good common segment set based on inter-data commonality detection is proposed.Theoretical analysis proves that CDM algorithm achieves a good measurement for the commonality between two strings.In addition,we conduct an synthetic dataset which are produced randomly.Numerical results shows that CDM algorithm can get better performance in measuring commonality between two binary files compared with Greedy-String-Tiling(GST)algorithm and simple greedy algorithm.
文摘In a drilling process, the power spectrum of the drilling force is related tothe tool wear and is widely applied in the monitoring of tool wear. But the feature extraction andidentification of the power spectrum have always been an unresolved difficult problem. This papersolves it through decomposition of the power spectrum in multilayers using wavelet transform andextraction of the low frequency decomposition coefficient as the envelope information of the powerspectrum. Intelligent identification of the tool wear status is achieved in the drilling processthrough fusing the wavelet decomposition coefficient of the power spectrum by using a BP (BackPropagation) neural network. The experimental results show that the features of the power spectrumcan be extracted efficiently through this method, and the trained neural networks show highidentification precision and the ability of extension.
