Based on the control scheme of force and position, the controlling andtesting system of metal V-belt type CVT is developed. Having taken account of the complex nonlinearcharacteristics of the CVT shift dynamics and th...Based on the control scheme of force and position, the controlling andtesting system of metal V-belt type CVT is developed. Having taken account of the complex nonlinearcharacteristics of the CVT shift dynamics and the saturation and nonlinear characteristics of thespeed ratio control valve, the speed ratio fuzzy controller based on the speed ratio feedback isdesigned. The experiment results show that the developed speed ratio control system is practical andfeasible.展开更多
Building empirical equations is an effective way to link the acoustic and physical properties of sediments.These equations play an important role in the prediction of sediments sound speeds required in underwater acou...Building empirical equations is an effective way to link the acoustic and physical properties of sediments.These equations play an important role in the prediction of sediments sound speeds required in underwater acoustics.Although many empirical equations coupling acoustic and physical properties have been developed over the past few decades,further confirmation of their applicability by obtaining large amounts of data,especially for equations based on in situ acoustic measurement techniques,is required.A sediment acoustic survey in the South Yellow Sea from 2009 to 2010 revealed statistical relationships between the in situ sound speed and sediment physical properties.To improve the comparability of these relationships with existing empirical equations,the present study calculated the ratio of the in situ sediment sound speed to the bottom seawater sound speed,and established the relationships between the sound speed ratio and the mean grain size,density and porosity of the sediment.The sound speed of seawater at in situ measurement stations was calculated using a perennially averaged seawater sound speed map by an interpolation method.Moreover,empirical relations between the index of impedance and the sound speed and the physical properties were established.The results confirmed that the existing empirical equations between the in situ sound speed ratio and the density and porosity have general suitability for application.This study also considered that a multiple-parameter equation coupling the sound speed ratio to both the porosity and the mean grain size may be more useful for predicting the sound speed than an equation coupling the sound speed ratio to the mean grain size.展开更多
Rotating flows represent a very interesting area for researchers and industry for their extensive use in industrial and domestic machinery and especially for their great energy potential, annular flows are an example ...Rotating flows represent a very interesting area for researchers and industry for their extensive use in industrial and domestic machinery and especially for their great energy potential, annular flows are an example that draws the attention of researchers in recent years. The best design and optimization of these devices require knowledge of thermal, mechanical and hydrodynamic characteristics of flows circulating in these devices. An example of hydrodynamic parameters is the speed of rotation of the moving walls. This work is to study numerically the influence of the rotating speed ratio Γ of the two moving cylinders on the mean and especially on the turbulent quantities of the turbulent flow in the annular space. The numerical simulation is based on one-point statistical modeling using a low Reynolds number second-order full stress transport closure (RSM model), simulation code is not a black box but a completely transparent code where we can intervene at any step of the calculation. We have varied Γ from -1.0 to 1.0 while maintaining always the external cylinder with same speed Ω. The results show that the turbulence structure, profiles of mean velocities and the nature of the boundary layers of the mobile walls depend enormously on the ratio of speeds. The level of turbulence measured by the kinetic energy of turbulence and the Reynolds stresses shows well that the ratio Γ is an interesting parameter to exploit turbulence in this kind of annular flows.展开更多
采用模型试验方法,对多层互剪搅拌桩工法(contra-rotational shear deep soil mixing,简称CS-DSM工法)的工艺因素进行了试验研究,探索了水泥掺量、单位桩长搅拌次数T、单位体积搅拌能量E以及内外钻杆转速比RN等工艺因素对搅拌桩均匀性...采用模型试验方法,对多层互剪搅拌桩工法(contra-rotational shear deep soil mixing,简称CS-DSM工法)的工艺因素进行了试验研究,探索了水泥掺量、单位桩长搅拌次数T、单位体积搅拌能量E以及内外钻杆转速比RN等工艺因素对搅拌桩均匀性与强度UCS的影响。模型试验研究发现,通过多层互剪搅拌能够根除地表冒浆、防止糊钻抱钻、提高固化材料利用率。18组模型试验结果阐明搅拌桩在T-E-UCS之间存在固有关联,并揭示出机械参数、输出能量与桩身强度之间的本质关系。提供的计算方法可以定性指导选取合理的工艺参数,实现桩身设计强度目标。作为重要工艺因素,内外钻杆转速比RN与桩身强度试验曲线存在极值点,建议在工程中将1.80~2.20作为获取桩身峰值强度的最优RN值域。CS-DSM工法应用的系列研究结果为高质量搅拌桩工艺控制原则和质量保障体系提供了试验依据。展开更多
基金This project is supported by National Natural Science Foundation of China(No.50005026)Visiting Scholar Foundation of State Key Laboratory ofMechanical Transmission in Chongqing University, China.
文摘Based on the control scheme of force and position, the controlling andtesting system of metal V-belt type CVT is developed. Having taken account of the complex nonlinearcharacteristics of the CVT shift dynamics and the saturation and nonlinear characteristics of thespeed ratio control valve, the speed ratio fuzzy controller based on the speed ratio feedback isdesigned. The experiment results show that the developed speed ratio control system is practical andfeasible.
基金The National Natural Science Foundation of China under contract Nos 42076082,41706062 and 41676055the Director Fund of Pilot National Laboratory for Marine Science and Technology(Qingdao)under contract No.QNLM201713+1 种基金the Public Science and Technology Research Funds Projects of Ocean under contract No.201405032the Taishan Scholar Project Funding under contract No.tspd20161007。
文摘Building empirical equations is an effective way to link the acoustic and physical properties of sediments.These equations play an important role in the prediction of sediments sound speeds required in underwater acoustics.Although many empirical equations coupling acoustic and physical properties have been developed over the past few decades,further confirmation of their applicability by obtaining large amounts of data,especially for equations based on in situ acoustic measurement techniques,is required.A sediment acoustic survey in the South Yellow Sea from 2009 to 2010 revealed statistical relationships between the in situ sound speed and sediment physical properties.To improve the comparability of these relationships with existing empirical equations,the present study calculated the ratio of the in situ sediment sound speed to the bottom seawater sound speed,and established the relationships between the sound speed ratio and the mean grain size,density and porosity of the sediment.The sound speed of seawater at in situ measurement stations was calculated using a perennially averaged seawater sound speed map by an interpolation method.Moreover,empirical relations between the index of impedance and the sound speed and the physical properties were established.The results confirmed that the existing empirical equations between the in situ sound speed ratio and the density and porosity have general suitability for application.This study also considered that a multiple-parameter equation coupling the sound speed ratio to both the porosity and the mean grain size may be more useful for predicting the sound speed than an equation coupling the sound speed ratio to the mean grain size.
文摘Rotating flows represent a very interesting area for researchers and industry for their extensive use in industrial and domestic machinery and especially for their great energy potential, annular flows are an example that draws the attention of researchers in recent years. The best design and optimization of these devices require knowledge of thermal, mechanical and hydrodynamic characteristics of flows circulating in these devices. An example of hydrodynamic parameters is the speed of rotation of the moving walls. This work is to study numerically the influence of the rotating speed ratio Γ of the two moving cylinders on the mean and especially on the turbulent quantities of the turbulent flow in the annular space. The numerical simulation is based on one-point statistical modeling using a low Reynolds number second-order full stress transport closure (RSM model), simulation code is not a black box but a completely transparent code where we can intervene at any step of the calculation. We have varied Γ from -1.0 to 1.0 while maintaining always the external cylinder with same speed Ω. The results show that the turbulence structure, profiles of mean velocities and the nature of the boundary layers of the mobile walls depend enormously on the ratio of speeds. The level of turbulence measured by the kinetic energy of turbulence and the Reynolds stresses shows well that the ratio Γ is an interesting parameter to exploit turbulence in this kind of annular flows.
文摘采用模型试验方法,对多层互剪搅拌桩工法(contra-rotational shear deep soil mixing,简称CS-DSM工法)的工艺因素进行了试验研究,探索了水泥掺量、单位桩长搅拌次数T、单位体积搅拌能量E以及内外钻杆转速比RN等工艺因素对搅拌桩均匀性与强度UCS的影响。模型试验研究发现,通过多层互剪搅拌能够根除地表冒浆、防止糊钻抱钻、提高固化材料利用率。18组模型试验结果阐明搅拌桩在T-E-UCS之间存在固有关联,并揭示出机械参数、输出能量与桩身强度之间的本质关系。提供的计算方法可以定性指导选取合理的工艺参数,实现桩身设计强度目标。作为重要工艺因素,内外钻杆转速比RN与桩身强度试验曲线存在极值点,建议在工程中将1.80~2.20作为获取桩身峰值强度的最优RN值域。CS-DSM工法应用的系列研究结果为高质量搅拌桩工艺控制原则和质量保障体系提供了试验依据。
