Planetary gear train is a critical transmission component in large equipment such as helicopters and wind turbines. Conducting damage perception of planetary gear trains is of great significance for the safe operation...Planetary gear train is a critical transmission component in large equipment such as helicopters and wind turbines. Conducting damage perception of planetary gear trains is of great significance for the safe operation of equipment. Existing methods for damage perception of planetary gear trains mainly rely on linear vibration analysis. However, these methods based on linear vibration signal analysis face challenges such as rich vibration sources, complex signal coupling and modulation mechanisms, significant influence of transmission paths, and difficulties in separating damage information. This paper proposes a method for separating instantaneous angular speed (IAS) signals for planetary gear fault diagnosis. Firstly, this method obtains encoder pulse signals through a built-in encoder. Based on this, it calculates the IAS signals using the Hilbert transform, and obtains the time-domain synchronous average signal of the IAS of the planetary gear through time-domain synchronous averaging technology, thus realizing the fault diagnosis of the planetary gear train. Experimental results validate the effectiveness of the calculated IAS signals, demonstrating that the time-domain synchronous averaging technology can highlight impact characteristics, effectively separate and extract fault impacts, greatly reduce the testing cost of experiments, and provide an effective tool for the fault diagnosis of planetary gear trains.展开更多
Bearing condition monitoring and fault diagnosis (CMFD) can investigate bearing faults in the early stages, preventing the subsequent impacts of machine bearing failures effectively. CMFD for low-speed, non-continuous...Bearing condition monitoring and fault diagnosis (CMFD) can investigate bearing faults in the early stages, preventing the subsequent impacts of machine bearing failures effectively. CMFD for low-speed, non-continuous operation bearings, such as yaw bearings and pitch bearings in wind turbines, and rotating support bearings in space launch towers, presents more challenges compared to continuous rolling bearings. Firstly, these bearings have very slow speeds, resulting in weak collected fault signals that are heavily masked by severe noise interference. Secondly, their limited rotational angles during operation lead to a restricted number of fault signals. Lastly, the interference from deceleration and direction-changing impact signals significantly affects fault impact signals. To address these challenges, this paper proposes a method for extracting fault features in low-speed reciprocating bearings based on short signal segmentation and modulation signal bispectrum (MSB) slicing. This method initially separates short signals corresponding to individual cycles from the vibration signals based on encoder signals. Subsequently, MSB analysis is performed on each short signal to generate MSB carrier-slice spectra. The optimal carrier frequency and its corresponding modulation signal slice spectrum are determined based on the carrier-slice spectra. Finally, the MSB modulation signal slice spectra of the short signal set are averaged to obtain the overall average feature of the sliced spectra.展开更多
<div style="text-align:justify;"> In view of the small transmission capacity and single signal modulation format of the existing optical transmission system, this paper proposes an ultra-high-speed opt...<div style="text-align:justify;"> In view of the small transmission capacity and single signal modulation format of the existing optical transmission system, this paper proposes an ultra-high-speed optical signal access scheme based on NEL0670, which can realize the transmission of 100 G DP-QPSK, 200 G DP-16QAM and 400 G DP-16QAM signals, and realize flexible and intelligent reception of multi-system optical signals. </div>展开更多
Speed-flow relationship is the fundamental for the traffic simulation and traffic volume forecast. Traditional quadratic polynomial model can’t reflect the saturate flow at signal intersections. In order to determine...Speed-flow relationship is the fundamental for the traffic simulation and traffic volume forecast. Traditional quadratic polynomial model can’t reflect the saturate flow at signal intersections. In order to determine the speed-flow relationship at signal intersections, the speed and time-headway of vehicles at two signal intersections were investigated and the accuracy of software used to get the speed was tested. After vehicle starting-up from queuing, the time-headway reduces gradually with the increase of speed. The relationship of power exponential function between speed and time-headway is formulated. Traffic volume can be calculated by the vehicle time-headway. Then the speed-flow relationship was developed and an S-shaped curve model was built in this paper. In the S-shaped curve model, traffic flow approaches to the saturate when the speed doesn’t increase. Thus, S-shaped curve model is better to describe the speed-flow relationship at signal intersection. The results can provide a reference to determine the parameters in traffic simulation and for the study of level of service of intersections.展开更多
文摘Planetary gear train is a critical transmission component in large equipment such as helicopters and wind turbines. Conducting damage perception of planetary gear trains is of great significance for the safe operation of equipment. Existing methods for damage perception of planetary gear trains mainly rely on linear vibration analysis. However, these methods based on linear vibration signal analysis face challenges such as rich vibration sources, complex signal coupling and modulation mechanisms, significant influence of transmission paths, and difficulties in separating damage information. This paper proposes a method for separating instantaneous angular speed (IAS) signals for planetary gear fault diagnosis. Firstly, this method obtains encoder pulse signals through a built-in encoder. Based on this, it calculates the IAS signals using the Hilbert transform, and obtains the time-domain synchronous average signal of the IAS of the planetary gear through time-domain synchronous averaging technology, thus realizing the fault diagnosis of the planetary gear train. Experimental results validate the effectiveness of the calculated IAS signals, demonstrating that the time-domain synchronous averaging technology can highlight impact characteristics, effectively separate and extract fault impacts, greatly reduce the testing cost of experiments, and provide an effective tool for the fault diagnosis of planetary gear trains.
文摘Bearing condition monitoring and fault diagnosis (CMFD) can investigate bearing faults in the early stages, preventing the subsequent impacts of machine bearing failures effectively. CMFD for low-speed, non-continuous operation bearings, such as yaw bearings and pitch bearings in wind turbines, and rotating support bearings in space launch towers, presents more challenges compared to continuous rolling bearings. Firstly, these bearings have very slow speeds, resulting in weak collected fault signals that are heavily masked by severe noise interference. Secondly, their limited rotational angles during operation lead to a restricted number of fault signals. Lastly, the interference from deceleration and direction-changing impact signals significantly affects fault impact signals. To address these challenges, this paper proposes a method for extracting fault features in low-speed reciprocating bearings based on short signal segmentation and modulation signal bispectrum (MSB) slicing. This method initially separates short signals corresponding to individual cycles from the vibration signals based on encoder signals. Subsequently, MSB analysis is performed on each short signal to generate MSB carrier-slice spectra. The optimal carrier frequency and its corresponding modulation signal slice spectrum are determined based on the carrier-slice spectra. Finally, the MSB modulation signal slice spectra of the short signal set are averaged to obtain the overall average feature of the sliced spectra.
文摘<div style="text-align:justify;"> In view of the small transmission capacity and single signal modulation format of the existing optical transmission system, this paper proposes an ultra-high-speed optical signal access scheme based on NEL0670, which can realize the transmission of 100 G DP-QPSK, 200 G DP-16QAM and 400 G DP-16QAM signals, and realize flexible and intelligent reception of multi-system optical signals. </div>
文摘Speed-flow relationship is the fundamental for the traffic simulation and traffic volume forecast. Traditional quadratic polynomial model can’t reflect the saturate flow at signal intersections. In order to determine the speed-flow relationship at signal intersections, the speed and time-headway of vehicles at two signal intersections were investigated and the accuracy of software used to get the speed was tested. After vehicle starting-up from queuing, the time-headway reduces gradually with the increase of speed. The relationship of power exponential function between speed and time-headway is formulated. Traffic volume can be calculated by the vehicle time-headway. Then the speed-flow relationship was developed and an S-shaped curve model was built in this paper. In the S-shaped curve model, traffic flow approaches to the saturate when the speed doesn’t increase. Thus, S-shaped curve model is better to describe the speed-flow relationship at signal intersection. The results can provide a reference to determine the parameters in traffic simulation and for the study of level of service of intersections.
